view tests/test-init.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

This test tries to exercise the ssh functionality with a dummy script

  $ checknewrepo()
  > {
  >    name=$1
  >    if [ -d "$name"/.hg/store ]; then
  >    echo store created
  >    fi
  >    if [ -f "$name"/.hg/00changelog.i ]; then
  >    echo 00changelog.i created
  >    fi
  >    cat "$name"/.hg/requires
  > }

creating 'local'

  $ hg init local
  $ checknewrepo local
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)
  $ echo this > local/foo
  $ hg ci --cwd local -A -m "init"
  adding foo

test custom revlog chunk cache sizes

  $ hg --config format.chunkcachesize=0 log -R local -pv
  abort: revlog chunk cache size 0 is not greater than 0!
  [255]
  $ hg --config format.chunkcachesize=1023 log -R local -pv
  abort: revlog chunk cache size 1023 is not a power of 2!
  [255]
  $ hg --config format.chunkcachesize=1024 log -R local -pv
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo
  description:
  init
  
  
  diff -r 000000000000 -r 08b9e9f63b32 foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +this
  

creating repo with format.usestore=false

  $ hg --config format.usestore=false init old
  $ checknewrepo old
  generaldelta
  revlogv1
  testonly-simplestore (reposimplestore !)
  sparserevlog

creating repo with format.usefncache=false

  $ hg --config format.usefncache=false init old2
  $ checknewrepo old2
  store created
  00changelog.i created
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

creating repo with format.dotencode=false

  $ hg --config format.dotencode=false init old3
  $ checknewrepo old3
  store created
  00changelog.i created
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

creating repo with format.dotencode=false

  $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4
  $ checknewrepo old4
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store
  testonly-simplestore (reposimplestore !)

test failure

  $ hg init local
  abort: repository local already exists!
  [255]

init+push to remote2

  $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  $ hg incoming -R remote2 local
  comparing with local
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     init
  

  $ hg push -R local -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  pushing to ssh://user@dummy/remote2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

clone to remote1

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

The largefiles extension doesn't crash
  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remotelf --config extensions.largefiles=
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

init to existing repo

  $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

clone to existing repo

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

output of dummyssh

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg init remote2
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
  Got arguments 1:user@dummy 2:hg init remotelf
  Got arguments 1:user@dummy 2:hg -R remotelf serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg init remote1

comparing repositories

  $ hg tip -q -R local
  0:08b9e9f63b32
  $ hg tip -q -R remote1
  0:08b9e9f63b32
  $ hg tip -q -R remote2
  0:08b9e9f63b32

check names for repositories (clashes with URL schemes, special chars)

  $ for i in bundle file hg http https old-http ssh static-http "with space"; do
  >   printf "hg init \"$i\"... "
  >   hg init "$i"
  >   test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
  > done
  hg init "bundle"... ok
  hg init "file"... ok
  hg init "hg"... ok
  hg init "http"... ok
  hg init "https"... ok
  hg init "old-http"... ok
  hg init "ssh"... ok
  hg init "static-http"... ok
  hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
  $ hg init " "
  $ test -d " "
  $ test -d " /.hg"
#endif

creating 'local/sub/repo'

  $ hg init local/sub/repo
  $ checknewrepo local/sub/repo
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

prepare test of init of url configured from paths

  $ echo '[paths]' >> $HGRCPATH
  $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
  $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

init should (for consistency with clone) expand the url

  $ hg init somewhere
  $ checknewrepo "url from paths"
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

verify that clone also expand urls

  $ hg clone somewhere elsewhere
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ checknewrepo "another paths url"
  store created
  00changelog.i created
  dotencode
  fncache
  generaldelta
  revlogv1
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

clone bookmarks

  $ hg -R local bookmark test
  $ hg -R local bookmarks
   * test                      0:08b9e9f63b32
  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  exporting bookmark test
  $ hg -R remote-bookmarks bookmarks
     test                      0:08b9e9f63b32

Check format constraint
-----------------------

  $ hg init issue6056 --config format.usegeneraldelta=0 --config format.sparse-revlog=0
  $ cd issue6056
  $ echo foo > 1
  $ echo foo > 2
  $ echo foo > 3
  $ echo foo > 4
  $ echo foo > 5
  $ hg add *

Build a bogus repository (sparserevlog without general delta)

  $ hg commit -m 'initial changesets'
  $ echo 'sparserevlog' >> .hg/requires
  $ for x in `$TESTDIR/seq.py 100`; do
  >     echo $x >> `expr $x % 5 + 1`
  >     hg commit -m $x
  > done
  $ cd ..