view tests/test-merge-no-file-change.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

  $ cat <<'EOF' >> "$HGRCPATH"
  > [extensions]
  > convert =
  > [templates]
  > l = '{rev}:{node|short} p={p1rev},{p2rev} m={manifest} f={files|json}'
  > EOF

  $ check_convert_identity () {
  >     hg convert -q "$1" "$1.converted"
  >     hg outgoing -q -R "$1.converted" "$1"
  >     if [ "$?" != 1 ]; then
  >         echo '*** BUG: hash changes on convert ***'
  >         hg log -R "$1.converted" -GTl
  >     fi
  > }

Files added at both parents:

  $ hg init added-both
  $ cd added-both
  $ touch a b c
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ hg ci -qAm2 c

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  committing files:
  b
  not reusing manifest (no file change in changelog, but manifest differs)
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:7aa8a293f5d97377037afc21e871e036e718d659
  $ hg log -GTl
  @    3:7aa8a293f5d9 p=2,1 m=3:8667461869a1 f=[]
  |\
  | o  2:e0ea47086fce p=0,-1 m=2:b2e5b07f9374 f=["c"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-both

Files added at both parents, but the other removed at the merge:
(In this case, ctx.files() after the commit contains the removed file "b", but
its manifest does not differ from p1.)

  $ hg init added-both-removed-at-merge
  $ cd added-both-removed-at-merge
  $ touch a b c
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ hg ci -qAm2 c

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg rm -f b
  $ hg ci --debug -m merge
  committing files:
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:915745f3ca3d9d699925269474c2d0a9526e8dfa
  $ hg log -GTl
  @    3:915745f3ca3d p=2,1 m=3:8e9cf3456921 f=["b"]
  |\
  | o  2:e0ea47086fce p=0,-1 m=2:b2e5b07f9374 f=["c"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-both

An identical file added at both parents:

  $ hg init added-identical
  $ cd added-identical
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b
  $ hg ci -qAm2 b

  $ hg merge
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 3:de26182cd210f0c3fb175ca7616704ab963d3024
  $ hg log -GTl
  @    3:de26182cd210 p=2,1 m=1:686dbf0aeca4 f=[]
  |\
  | o  2:f00991f11eca p=0,-1 m=1:686dbf0aeca4 f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-identical

#if execbit

An identical file added at both parents, but the flag differs. Take local:

  $ hg init flag-change-take-p1
  $ cd flag-change-take-p1
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b
  $ chmod +x b
  $ hg ci -qAm2 b

  $ hg merge
  warning: cannot merge flags for b without common ancestor - keeping local flags
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ chmod +x b
  $ hg ci --debug -m merge
  committing files:
  b
  reusing manifest from p1 (listed files actually unchanged)
  committing changelog
  updating the branch cache
  committed changeset 3:c8d50407916ef8a5a97cb6e36ca9bc844a6ee13e
  $ hg log -GTl
  @    3:c8d50407916e p=2,1 m=2:36b69ba4b24b f=[]
  |\
  | o  2:99451f16b3f5 p=0,-1 m=2:36b69ba4b24b f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  
  $ hg files -vr3
           0   a
           0 x b

  $ cd ..
  $ check_convert_identity flag-change-take-p1

An identical file added at both parents, but the flag differs. Take other:

  $ hg init flag-change-take-p2
  $ cd flag-change-take-p2
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b
  $ chmod +x b
  $ hg ci -qAm2 b

  $ hg merge
  warning: cannot merge flags for b without common ancestor - keeping local flags
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ chmod -x b
  $ hg ci --debug -m merge
  committing files:
  b
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:06a62a687d87c7d8944743dee1ee9d8c66b3f6e3
  $ hg log -GTl
  @    3:06a62a687d87 p=2,1 m=3:2a315ba1aa45 f=["b"]
  |\
  | o  2:99451f16b3f5 p=0,-1 m=2:36b69ba4b24b f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  
  $ hg files -vr3
           0   a
           0   b

  $ cd ..
  $ check_convert_identity flag-change-take-p2

#endif

An identical file added at both parents, one more file added at p2:

  $ hg init added-some-p2
  $ cd added-some-p2
  $ touch a b c
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg ci -qAm2 c
  $ hg up -q 0
  $ touch b
  $ hg ci -qAm3 b

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  committing files:
  c
  not reusing manifest (no file change in changelog, but manifest differs)
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 4:f7fbc4e4d9a8fde03ba475adad675578c8bf472d
  $ hg log -GTl
  @    4:f7fbc4e4d9a8 p=3,2 m=3:92acd5bfd716 f=[]
  |\
  | o  3:e9d9f3cc981f p=0,-1 m=1:686dbf0aeca4 f=["b"]
  | |
  o |  2:93c5529a4ec7 p=1,-1 m=2:ae25a31b30b3 f=["c"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-some-p2

An identical file added at both parents, one more file added at p1:
(In this case, p1 manifest is reused at the merge commit, which means the
manifest DAG does not have the same shape as the changelog.)

  $ hg init added-some-p1
  $ cd added-some-p1
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ touch b c
  $ hg ci -qAm2 b
  $ hg ci -qAm3 c

  $ hg merge
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 4:a9f0f589a913f5a149dc10dfbd5af726977c36c4
  $ hg log -GTl
  @    4:a9f0f589a913 p=3,1 m=2:ae25a31b30b3 f=[]
  |\
  | o  3:b8dc385241b5 p=2,-1 m=2:ae25a31b30b3 f=["c"]
  | |
  | o  2:f00991f11eca p=0,-1 m=1:686dbf0aeca4 f=["b"]
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"]
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"]
  

  $ cd ..
  $ check_convert_identity added-some-p1

A file added at p2, a named branch created at p1:

  $ hg init named-branch-p1
  $ cd named-branch-p1
  $ touch a b
  $ hg ci -qAm0 a
  $ hg ci -qAm1 b
  $ hg up -q 0
  $ hg branch -q foo
  $ hg ci -m2

  $ hg merge default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  committing files:
  b
  not reusing manifest (no file change in changelog, but manifest differs)
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 3:fb97d83b02fd072295cfc2171f21b7d38509bfd7
  $ hg log -GT'{l} branch={branch}'
  @    3:fb97d83b02fd p=2,1 m=2:9091c64f4ea1 f=[] branch=foo
  |\
  | o  2:a3a9fa6587e5 p=0,-1 m=0:8515d4bfda76 f=[] branch=foo
  | |
  o |  1:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"] branch=default
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"] branch=default
  

  $ cd ..
  $ check_convert_identity named-branch-p1

A file added at p1, a named branch created at p2:
(In this case, p1 manifest is reused at the merge commit, which means the
manifest DAG does not have the same shape as the changelog.)

  $ hg init named-branch-p2
  $ cd named-branch-p2
  $ touch a b
  $ hg ci -qAm0 a
  $ hg branch -q foo
  $ hg ci -m1
  $ hg up -q 0
  $ hg ci -qAm1 b

  $ hg merge foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 3:036823e24692218324d4af43b07ff89f8a000096
  $ hg log -GT'{l} branch={branch}'
  @    3:036823e24692 p=2,1 m=1:686dbf0aeca4 f=[] branch=default
  |\
  | o  2:64d01526d4c2 p=0,-1 m=1:686dbf0aeca4 f=["b"] branch=default
  | |
  o |  1:da38c8e00727 p=0,-1 m=0:8515d4bfda76 f=[] branch=foo
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"] branch=default
  

  $ cd ..
  $ check_convert_identity named-branch-p2

A file changed once at both parents, but amended to have identical content:

  $ hg init amend-p1
  $ cd amend-p1
  $ touch a
  $ hg ci -qAm0 a
  $ echo foo > a
  $ hg ci -m1
  $ hg up -q 0
  $ echo bar > a
  $ hg ci -qm2
  $ echo foo > a
  $ hg ci -qm3 --amend

  $ hg merge
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci --debug -m merge
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  committed changeset 3:314e5bc5adf5c58ea571efabe33eedba20a201aa
  $ hg log -GT'{l} branch={branch}'
  @    3:314e5bc5adf5 p=2,1 m=1:d33ea248bd73 f=[] branch=default
  |\
  | o  2:de9c64f226a3 p=0,-1 m=1:d33ea248bd73 f=["a"] branch=default
  | |
  o |  1:6a74aec01b3c p=0,-1 m=1:d33ea248bd73 f=["a"] branch=default
  |/
  o  0:487a0a245cea p=-1,-1 m=0:8515d4bfda76 f=["a"] branch=default
  

  $ cd ..
  $ check_convert_identity amend-p1