Mercurial > hg
view tests/test-minirst.py @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | 2372284d9457 |
children | aaff3bc75306 |
line wrap: on
line source
from __future__ import absolute_import, print_function from mercurial import minirst from mercurial.utils import stringutil def debugformat(text, form, **kwargs): blocks, pruned = minirst.parse(text, **kwargs) if form == b'html': print("html format:") out = minirst.format(text, style=form, **kwargs) else: print("%d column format:" % form) out = minirst.format(text, width=form, **kwargs) print("-" * 70) print(out[:-1].decode('utf8')) if kwargs.get('keep'): print("-" * 70) print(stringutil.pprint(pruned).decode('utf8')) print("-" * 70) print() def debugformats(title, text, **kwargs): print("== %s ==" % title) debugformat(text, 60, **kwargs) debugformat(text, 30, **kwargs) debugformat(text, b'html', **kwargs) paragraphs = b""" This is some text in the first paragraph. A small indented paragraph. It is followed by some lines containing random whitespace. \n \n \nThe third and final paragraph. """ debugformats('paragraphs', paragraphs) definitions = b""" A Term Definition. The indented lines make up the definition. Another Term Another definition. The final line in the definition determines the indentation, so this will be indented with four spaces. A Nested/Indented Term Definition. """ debugformats('definitions', definitions) literals = br""" The fully minimized form is the most convenient form:: Hello literal world In the partially minimized form a paragraph simply ends with space-double-colon. :: //////////////////////////////////////// long un-wrapped line in a literal block \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ :: This literal block is started with '::', the so-called expanded form. The paragraph with '::' disappears in the final output. """ debugformats('literals', literals) lists = b""" - This is the first list item. Second paragraph in the first list item. - List items need not be separated by a blank line. - And will be rendered without one in any case. We can have indented lists: - This is an indented list item - Another indented list item:: - A literal block in the middle of an indented list. (The above is not a list item since we are in the literal block.) :: Literal block with no indentation (apart from the two spaces added to all literal blocks). 1. This is an enumerated list (first item). 2. Continuing with the second item. (1) foo (2) bar 1) Another 2) List Line blocks are also a form of list: | This is the first line. The line continues here. | This is the second line. Bullet lists are also detected: * This is the first bullet * This is the second bullet It has 2 lines * This is the third bullet """ debugformats('lists', lists) options = b""" There is support for simple option lists, but only with long options: -X, --exclude filter an option with a short and long option with an argument -I, --include an option with both a short option and a long option --all Output all. --both Output both (this description is quite long). --long Output all day long. --par This option has two paragraphs in its description. This is the first. This is the second. Blank lines may be omitted between options (as above) or left in (as here). The next paragraph looks like an option list, but lacks the two-space marker after the option. It is treated as a normal paragraph: --foo bar baz """ debugformats('options', options) fields = b""" :a: First item. :ab: Second item. Indentation and wrapping is handled automatically. Next list: :small: The larger key below triggers full indentation here. :much too large: This key is big enough to get its own line. """ debugformats('fields', fields) containers = b""" Normal output. .. container:: debug Initial debug output. .. container:: verbose Verbose output. .. container:: debug Debug output. """ debugformats('containers (normal)', containers) debugformats('containers (verbose)', containers, keep=[b'verbose']) debugformats('containers (debug)', containers, keep=[b'debug']) debugformats( 'containers (verbose debug)', containers, keep=[b'verbose', b'debug'] ) roles = b"""Please see :hg:`add`.""" debugformats('roles', roles) sections = b""" Title ===== Section ------- Subsection '''''''''' Markup: ``foo`` and :hg:`help` ------------------------------ """ debugformats('sections', sections) admonitions = b""" .. note:: This is a note - Bullet 1 - Bullet 2 .. warning:: This is a warning Second input line of warning .. danger:: This is danger """ debugformats('admonitions', admonitions) comments = b""" Some text. .. A comment .. An indented comment Some indented text. .. Empty comment above """ debugformats('comments', comments) data = [ [b'a', b'b', b'c'], [b'1', b'2', b'3'], [b'foo', b'bar', b'baz this list is very very very long man'], ] rst = minirst.maketable(data, 2, True) table = b''.join(rst) print(table.decode('utf8')) debugformats('table', table) data = [ [b's', b'long', b'line\ngoes on here'], [b'', b'xy', b'tried to fix here\n by indenting'], ] rst = minirst.maketable(data, 1, False) table = b''.join(rst) print(table.decode('utf8')) debugformats('table+nl', table)