Mercurial > hg
view tests/test-mq-eol.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | 140b542b0e59 |
children |
line wrap: on
line source
Test interactions between mq and patch.eol $ cat <<EOF >> $HGRCPATH > [extensions] > mq = > [diff] > nodates = 1 > EOF $ cat > makepatch.py <<EOF > f = open('eol.diff', 'wb') > w = f.write > w(b'test message\n') > w(b'diff --git a/a b/a\n') > w(b'--- a/a\n') > w(b'+++ b/a\n') > w(b'@@ -1,5 +1,5 @@\n') > w(b' a\n') > w(b'-b\r\n') > w(b'+y\r\n') > w(b' c\r\n') > w(b' d\n') > w(b'-e\n') > w(b'\\\\ No newline at end of file\n') > w(b'+z\r\n') > w(b'\\\\ No newline at end of file\r\n') > EOF $ cat > cateol.py <<EOF > import sys > try: > stdout = sys.stdout.buffer > except AttributeError: > stdout = sys.stdout > for line in open(sys.argv[1], 'rb'): > line = line.replace(b'\r', b'<CR>') > line = line.replace(b'\n', b'<LF>') > stdout.write(line + b'\n') > EOF $ hg init repo $ cd repo $ echo '\.diff' > .hgignore $ echo '\.rej' >> .hgignore Test different --eol values $ "$PYTHON" -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")' $ hg ci -Am adda adding .hgignore adding a $ "$PYTHON" ../makepatch.py $ hg qimport eol.diff adding eol.diff to series file should fail in strict mode $ hg qpush applying eol.diff patching file a Hunk #1 FAILED at 0 1 out of 1 hunks FAILED -- saving rejects to file a.rej patch failed, unable to continue (try -v) patch failed, rejects left in working directory errors during apply, please fix and qrefresh eol.diff [2] $ hg qpop popping eol.diff patch queue now empty invalid eol $ hg --config patch.eol='LFCR' qpush applying eol.diff patch failed, unable to continue (try -v) patch failed, rejects left in working directory errors during apply, please fix and qrefresh eol.diff [2] $ hg qpop popping eol.diff patch queue now empty force LF $ hg --config patch.eol='CRLF' qpush applying eol.diff now at: eol.diff $ hg qrefresh $ "$PYTHON" ../cateol.py .hg/patches/eol.diff # HG changeset patch<LF> # Parent 0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF> test message<LF> <LF> diff -r 0d0bf99a8b7a a<LF> --- a/a<LF> +++ b/a<LF> @@ -1,5 +1,5 @@<LF> -a<LF> -b<LF> -c<LF> -d<LF> -e<LF> \ No newline at end of file<LF> +a<CR><LF> +y<CR><LF> +c<CR><LF> +d<CR><LF> +z<LF> \ No newline at end of file<LF> $ "$PYTHON" ../cateol.py a a<CR><LF> y<CR><LF> c<CR><LF> d<CR><LF> z $ hg qpop popping eol.diff patch queue now empty push again forcing LF and compare revisions $ hg --config patch.eol='CRLF' qpush applying eol.diff now at: eol.diff $ "$PYTHON" ../cateol.py a a<CR><LF> y<CR><LF> c<CR><LF> d<CR><LF> z $ hg qpop popping eol.diff patch queue now empty push again without LF and compare revisions $ hg qpush applying eol.diff now at: eol.diff $ "$PYTHON" ../cateol.py a a<CR><LF> y<CR><LF> c<CR><LF> d<CR><LF> z $ hg qpop popping eol.diff patch queue now empty $ cd .. Test .rej file EOL are left unchanged $ hg init testeol $ cd testeol $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')" $ hg ci -Am adda adding a $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')" $ hg qnew patch1 $ hg qpop popping patch1 patch queue now empty $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')" $ hg ci -m changea $ hg --config 'patch.eol=LF' qpush applying patch1 patching file a Hunk #1 FAILED at 0 1 out of 1 hunks FAILED -- saving rejects to file a.rej patch failed, unable to continue (try -v) patch failed, rejects left in working directory errors during apply, please fix and qrefresh patch1 [2] $ hg qpop popping patch1 patch queue now empty $ cat a.rej --- a +++ a @@ -1,4 +1,4 @@ 1\r (esc) 2\r (esc) -3\r (esc) +33\r (esc) 4 \ No newline at end of file $ hg --config 'patch.eol=auto' qpush applying patch1 patching file a Hunk #1 FAILED at 0 1 out of 1 hunks FAILED -- saving rejects to file a.rej patch failed, unable to continue (try -v) patch failed, rejects left in working directory errors during apply, please fix and qrefresh patch1 [2] $ hg qpop popping patch1 patch queue now empty $ cat a.rej --- a +++ a @@ -1,4 +1,4 @@ 1\r (esc) 2\r (esc) -3\r (esc) +33\r (esc) 4 \ No newline at end of file $ cd ..