view tests/test-narrow-exchange-merges.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

  $ . "$TESTDIR/narrow-library.sh"

create full repo

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 1 > inside/f
  $ hg commit -Aqm 'initial inside'

  $ mkdir outside
  $ echo 1 > outside/f
  $ hg commit -Aqm 'initial outside'

  $ echo 2a > outside/f
  $ hg commit -Aqm 'outside 2a'
  $ echo 3 > inside/f
  $ hg commit -Aqm 'inside 3'
  $ echo 4a > outside/f
  $ hg commit -Aqm 'outside 4a'
  $ hg update '.~3'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ echo 2b > outside/f
  $ hg commit -Aqm 'outside 2b'
  $ echo 3 > inside/f
  $ hg commit -Aqm 'inside 3'
  $ echo 4b > outside/f
  $ hg commit -Aqm 'outside 4b'
  $ hg update '.~3'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ echo 2c > outside/f
  $ hg commit -Aqm 'outside 2c'
  $ echo 3 > inside/f
  $ hg commit -Aqm 'inside 3'
  $ echo 4c > outside/f
  $ hg commit -Aqm 'outside 4c'
  $ hg update '.~3'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ echo 2d > outside/f
  $ hg commit -Aqm 'outside 2d'
  $ echo 3 > inside/f
  $ hg commit -Aqm 'inside 3'
  $ echo 4d > outside/f
  $ hg commit -Aqm 'outside 4d'

  $ hg update -r 'desc("outside 4a")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge -r 'desc("outside 4b")' 2>&1 | egrep -v '(warning:|incomplete!)'
  merging outside/f
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  $ echo 5 > outside/f
  $ rm outside/f.orig
  $ hg resolve --mark outside/f
  (no more unresolved files)
  $ hg commit -m 'merge a/b 5'
  $ echo 6 > outside/f
  $ hg commit -Aqm 'outside 6'

  $ hg merge -r 'desc("outside 4c")' 2>&1 | egrep -v '(warning:|incomplete!)'
  merging outside/f
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  $ echo 7 > outside/f
  $ rm outside/f.orig
  $ hg resolve --mark outside/f
  (no more unresolved files)
  $ hg commit -Aqm 'merge a/b/c 7'
  $ echo 8 > outside/f
  $ hg commit -Aqm 'outside 8'

  $ hg merge -r 'desc("outside 4d")' 2>&1 | egrep -v '(warning:|incomplete!)'
  merging outside/f
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  $ echo 9 > outside/f
  $ rm outside/f.orig
  $ hg resolve --mark outside/f
  (no more unresolved files)
  $ hg commit -Aqm 'merge a/b/c/d 9'
  $ echo 10 > outside/f
  $ hg commit -Aqm 'outside 10'

  $ echo 11 > inside/f
  $ hg commit -Aqm 'inside 11'
  $ echo 12 > outside/f
  $ hg commit -Aqm 'outside 12'

  $ hg log -G -T '{rev} {node|short} {desc}\n'
  @  21 8d874d57adea outside 12
  |
  o  20 7ef88b4dd4fa inside 11
  |
  o  19 2a20009de83e outside 10
  |
  o    18 3ac1f5779de3 merge a/b/c/d 9
  |\
  | o  17 38a9c2f7e546 outside 8
  | |
  | o    16 094aa62fc898 merge a/b/c 7
  | |\
  | | o  15 f29d083d32e4 outside 6
  | | |
  | | o    14 2dc11382541d merge a/b 5
  | | |\
  o | | |  13 27d07ef97221 outside 4d
  | | | |
  o | | |  12 465567bdfb2d inside 3
  | | | |
  o | | |  11 d1c61993ec83 outside 2d
  | | | |
  | o | |  10 56859a8e33b9 outside 4c
  | | | |
  | o | |  9 bb96a08b062a inside 3
  | | | |
  | o | |  8 b844052e7b3b outside 2c
  |/ / /
  | | o  7 9db2d8fcc2a6 outside 4b
  | | |
  | | o  6 6418167787a6 inside 3
  | | |
  +---o  5 77344f344d83 outside 2b
  | |
  | o  4 9cadde08dc9f outside 4a
  | |
  | o  3 019ef06f125b inside 3
  | |
  | o  2 75e40c075a19 outside 2a
  |/
  o  1 906d6c682641 initial outside
  |
  o  0 9f8e82b51004 initial inside
  

Now narrow clone this and get a hopefully correct graph

  $ cd ..
  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 14 changesets with 3 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd narrow

To make updating the tests easier, we print the emitted nodes
sorted. This makes it easier to identify when the same node structure
has been emitted, just in a different order.

  $ hg log -T '{if(ellipsis,"...")}{node|short} {p1node|short} {p2node|short} {desc}\n' | sort
  ...094aa62fc898 6418167787a6 bb96a08b062a merge a/b/c 7
  ...2a20009de83e 019ef06f125b 3ac1f5779de3 outside 10
  ...3ac1f5779de3 465567bdfb2d 094aa62fc898 merge a/b/c/d 9
  ...75e40c075a19 9f8e82b51004 000000000000 outside 2a
  ...77344f344d83 9f8e82b51004 000000000000 outside 2b
  ...8d874d57adea 7ef88b4dd4fa 000000000000 outside 12
  ...b844052e7b3b 9f8e82b51004 000000000000 outside 2c
  ...d1c61993ec83 9f8e82b51004 000000000000 outside 2d
  019ef06f125b 75e40c075a19 000000000000 inside 3
  465567bdfb2d d1c61993ec83 000000000000 inside 3
  6418167787a6 77344f344d83 000000000000 inside 3
  7ef88b4dd4fa 2a20009de83e 000000000000 inside 11
  9f8e82b51004 000000000000 000000000000 initial inside
  bb96a08b062a b844052e7b3b 000000000000 inside 3

But seeing the graph is also nice:
  $ hg log -G -T '{if(ellipsis,"...")}{node|short} {desc}\n'
  @  ...8d874d57adea outside 12
  |
  o  7ef88b4dd4fa inside 11
  |
  o    ...2a20009de83e outside 10
  |\
  | o    ...3ac1f5779de3 merge a/b/c/d 9
  | |\
  | | o    ...094aa62fc898 merge a/b/c 7
  | | |\
  | o | |  465567bdfb2d inside 3
  | | | |
  | o | |  ...d1c61993ec83 outside 2d
  | | | |
  | | | o  bb96a08b062a inside 3
  | | | |
  | +---o  ...b844052e7b3b outside 2c
  | | |
  | | o  6418167787a6 inside 3
  | | |
  | | o  ...77344f344d83 outside 2b
  | |/
  o |  019ef06f125b inside 3
  | |
  o |  ...75e40c075a19 outside 2a
  |/
  o  9f8e82b51004 initial inside