view tests/test-narrow-pull.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

  $ . "$TESTDIR/narrow-library.sh"

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo $x > "f$x"
  >   hg add "f$x"
  >   hg commit -m "Commit f$x"
  > done
  $ cd ..

narrow clone a couple files, f2 and f8

  $ hg clone --narrow ssh://user@dummy/master narrow --include "f2" --include "f8"
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 2 changes to 2 files
  new changesets *:* (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd narrow
  $ ls
  f2
  f8
  $ cat f2 f8
  2
  8

  $ cd ..

change every upstream file twice

  $ cd master
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo "update#1 $x" >> "f$x"
  >   hg commit -m "Update#1 to f$x" "f$x"
  > done
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo "update#2 $x" >> "f$x"
  >   hg commit -m "Update#2 to f$x" "f$x"
  > done
  $ cd ..

look for incoming changes

  $ cd narrow
  $ hg incoming --limit 3
  comparing with ssh://user@dummy/master
  searching for changes
  changeset:   5:ddc055582556
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Update#1 to f1
  
  changeset:   6:f66eb5ad621d
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Update#1 to f2
  
  changeset:   7:c42ecff04e99
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Update#1 to f3
  

Interrupting the pull is safe
  $ hg --config hooks.pretxnchangegroup.bad=false pull -q
  transaction abort!
  rollback completed
  abort: pretxnchangegroup.bad hook exited with status 1
  [255]
  $ hg id
  223311e70a6f tip

pull new changes down to the narrow clone. Should get 8 new changesets: 4
relevant to the narrow spec, and 4 ellipsis nodes gluing them all together.

  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  (run 'hg update' to get a working copy)
  $ hg log -T '{rev}: {desc}\n'
  13: Update#2 to f10
  12: Update#2 to f8
  11: Update#2 to f7
  10: Update#2 to f2
  9: Update#2 to f1
  8: Update#1 to f8
  7: Update#1 to f7
  6: Update#1 to f2
  5: Update#1 to f1
  4: Commit f10
  3: Commit f8
  2: Commit f7
  1: Commit f2
  0: Commit f1
  $ hg update tip
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

add a change and push it

  $ echo "update#3 2" >> f2
  $ hg commit -m "Update#3 to f2" f2
  $ hg log f2 -T '{rev}: {desc}\n'
  14: Update#3 to f2
  10: Update#2 to f2
  6: Update#1 to f2
  1: Commit f2
  $ hg push
  pushing to ssh://user@dummy/master
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ cd ..

  $ cd master
  $ hg log f2 -T '{rev}: {desc}\n'
  30: Update#3 to f2
  21: Update#2 to f2
  11: Update#1 to f2
  1: Commit f2
  $ hg log -l 3 -T '{rev}: {desc}\n'
  30: Update#3 to f2
  29: Update#2 to f10
  28: Update#2 to f9

Can pull into repo with a single commit

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/master narrow2 --include "f1" -r 0
  $ cd narrow2
  $ hg pull -q -r 1
  transaction abort!
  rollback completed
  abort: pull failed on remote
  [255]