view tests/test-narrow-widen.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

#testcases flat tree
  $ . "$TESTDIR/narrow-library.sh"

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > l = log -G -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  > EOF

#if tree
  $ cat << EOF >> $HGRCPATH
  > [experimental]
  > treemanifest = 1
  > EOF
#endif

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 'inside' > inside/f
  $ hg add inside/f
  $ hg commit -m 'add inside'

  $ mkdir widest
  $ echo 'widest' > widest/f
  $ hg add widest/f
  $ hg commit -m 'add widest'

  $ mkdir outside
  $ echo 'outside' > outside/f
  $ hg add outside/f
  $ hg commit -m 'add outside'

  $ cd ..

narrow clone the inside file

  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd narrow
  $ hg tracked
  I path:inside
  $ ls
  inside
  $ cat inside/f
  inside
  $ cd ..

add more upstream files which we will include in a wider narrow spec

  $ cd master

  $ mkdir wider
  $ echo 'wider' > wider/f
  $ hg add wider/f
  $ echo 'widest v2' > widest/f
  $ hg commit -m 'add wider, update widest'

  $ echo 'widest v3' > widest/f
  $ hg commit -m 'update widest v3'

  $ echo 'inside v2' > inside/f
  $ hg commit -m 'update inside'

  $ mkdir outside2
  $ echo 'outside2' > outside2/f
  $ hg add outside2/f
  $ hg commit -m 'add outside2'

  $ echo 'widest v4' > widest/f
  $ hg commit -m 'update widest v4'

  $ hg l
  @  7: update widest v4
  |
  o  6: add outside2
  |
  o  5: update inside
  |
  o  4: update widest v3
  |
  o  3: add wider, update widest
  |
  o  2: add outside
  |
  o  1: add widest
  |
  o  0: add inside
  

  $ cd ..

Widen the narrow spec to see the widest file. This should not get the newly
added upstream revisions.

  $ cd narrow
  $ hg l
  @  ...1: add outside
  |
  o  0: add inside
  
  $ hg tracked --addinclude widest/f
  comparing with ssh://user@dummy/master
  searching for changes
  saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-widen.hg (glob)
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 2 files
  $ hg l
  @  ...2: add outside
  |
  o  1: add widest
  |
  o  0: add inside
  
  $ hg tracked
  I path:inside
  I path:widest/f

  $ cat widest/f
  widest

Pull down the newly added upstream revision.

  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  (run 'hg update' to get a working copy)
  $ hg update -r 'desc("add wider")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v2

  $ hg update -r 'desc("update inside")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v3
  $ cat inside/f
  inside v2

  $ hg l
  o  7: update widest v4
  |
  o  ...6: add outside2
  |
  @  5: update inside
  |
  o  4: update widest v3
  |
  o  3: add wider, update widest
  |
  o  ...2: add outside
  |
  o  1: add widest
  |
  o  0: add inside
  

Check that widening with a newline fails

  $ hg tracked --addinclude 'widest
  > '
  abort: newlines are not allowed in narrowspec paths
  [255]

widen the narrow spec to include the wider file

  $ hg tracked --addinclude wider
  comparing with ssh://user@dummy/master
  searching for changes
  saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-widen.hg (glob)
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 7 changes to 3 files
  $ hg tracked
  I path:inside
  I path:wider
  I path:widest/f
  $ hg update 'desc("add widest")'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ cat widest/f
  widest
  $ hg update 'desc("add wider, update widest")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat wider/f
  wider
  $ cat widest/f
  widest v2
  $ hg update 'desc("update widest v3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v3
  $ hg update 'desc("update widest v4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v4

  $ hg l
  @  7: update widest v4
  |
  o  ...6: add outside2
  |
  o  5: update inside
  |
  o  4: update widest v3
  |
  o  3: add wider, update widest
  |
  o  ...2: add outside
  |
  o  1: add widest
  |
  o  0: add inside
  

separate suite of tests: files from 0-10 modified in changes 0-10. This allows
more obvious precise tests tickling particular corner cases.

  $ cd ..
  $ hg init upstream
  $ cd upstream
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ for x in `$TESTDIR/seq.py 0 10`
  > do
  >   mkdir d$x
  >   echo $x > d$x/f
  >   hg add d$x/f
  >   hg commit -m "add d$x/f"
  > done
  $ hg log -T "{rev}: {desc}\n"
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f

make narrow clone with every third node.

  $ cd ..
  $ hg clone --narrow ssh://user@dummy/upstream narrow2 --include d0 --include d3 --include d6 --include d9
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 4 changes to 4 files
  new changesets *:* (glob)
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd narrow2
  $ hg tracked
  I path:d0
  I path:d3
  I path:d6
  I path:d9
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 8 changesets with 4 changes to 4 files
  $ hg l
  @  ...7: add d10/f
  |
  o  6: add d9/f
  |
  o  ...5: add d8/f
  |
  o  4: add d6/f
  |
  o  ...3: add d5/f
  |
  o  2: add d3/f
  |
  o  ...1: add d2/f
  |
  o  0: add d0/f
  
  $ hg tracked --addinclude d1
  comparing with ssh://user@dummy/upstream
  searching for changes
  saved backup bundle to $TESTTMP/narrow2/.hg/strip-backup/*-widen.hg (glob)
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 5 changes to 5 files
  $ hg tracked
  I path:d0
  I path:d1
  I path:d3
  I path:d6
  I path:d9
  $ hg l
  @  ...8: add d10/f
  |
  o  7: add d9/f
  |
  o  ...6: add d8/f
  |
  o  5: add d6/f
  |
  o  ...4: add d5/f
  |
  o  3: add d3/f
  |
  o  ...2: add d2/f
  |
  o  1: add d1/f
  |
  o  0: add d0/f
  

Verify shouldn't claim the repo is corrupt after a widen.

  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 9 changesets with 5 changes to 5 files

Widening preserves parent of local commit

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/upstream narrow3 --include d2 -r 2
  $ cd narrow3
  $ hg l
  @  1: add d2/f
  |
  o  ...0: add d1/f
  
  $ hg pull -q -r 3
  $ hg co -q tip
  $ hg pull -q -r 4
  $ echo local > d2/f
  $ hg ci -m local
  created new head
  $ hg l
  @  4: local
  |
  | o  ...3: add d4/f
  |/
  o  ...2: add d3/f
  |
  o  1: add d2/f
  |
  o  ...0: add d1/f
  
  $ hg tracked -q --addinclude d0 --addinclude d9
  $ hg l
  @  5: local
  |
  | o  ...4: add d4/f
  |/
  o  ...3: add d3/f
  |
  o  2: add d2/f
  |
  o  ...1: add d1/f
  |
  o  0: add d0/f
  

Widening preserves bookmarks

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/upstream narrow-bookmarks --include d4
  $ cd narrow-bookmarks
  $ echo local > d4/f
  $ hg ci -m local
  $ hg bookmarks bookmark
  $ hg bookmarks
   * bookmark                  3:* (glob)
  $ hg -q tracked --addinclude d2
  $ hg bookmarks
   * bookmark                  5:* (glob)
  $ hg log -r bookmark -T '{desc}\n'
  local

Widening that fails can be recovered from

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/upstream interrupted --include d0
  $ cd interrupted
  $ echo local > d0/f
  $ hg ci -m local
  $ hg l
  @  2: local
  |
  o  ...1: add d10/f
  |
  o  0: add d0/f
  
  $ hg bookmarks bookmark
  $ hg --config hooks.pretxnchangegroup.bad=false tracked --addinclude d1
  comparing with ssh://user@dummy/upstream
  searching for changes
  saved backup bundle to $TESTTMP/interrupted/.hg/strip-backup/*-widen.hg (glob)
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: pretxnchangegroup.bad hook exited with status 1
  [255]
  $ hg l
  $ hg bookmarks
  no bookmarks set
  $ hg unbundle .hg/strip-backup/*-widen.hg
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files
  new changesets *:* (glob)
  (run 'hg update' to get a working copy)
  $ hg l
  o  2: local
  |
  o  ...1: add d10/f
  |
  o  0: add d0/f
  
  $ hg bookmarks
   * bookmark                  2:* (glob)