view tests/test-obsolete-changeset-exchange.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

Test changesets filtering during exchanges (some tests are still in
test-obsolete.t)

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > evolution.createmarkers=True
  > EOF

Push does not corrupt remote
----------------------------

Create a DAG where a changeset reuses a revision from a file first used in an
extinct changeset.

  $ hg init local
  $ cd local
  $ echo 'base' > base
  $ hg commit -Am base
  adding base
  $ echo 'A' > A
  $ hg commit -Am A
  adding A
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg revert -ar 1
  adding A
  $ hg commit -Am "A'"
  created new head
  $ hg log -G --template='{desc} {node}'
  @  A' f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  |
  | o  A 9d73aac1b2ed7d53835eaeec212ed41ea47da53a
  |/
  o  base d20a80d4def38df63a4b330b7fb688f3d4cae1e3
  
  $ hg debugobsolete 9d73aac1b2ed7d53835eaeec212ed41ea47da53a f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  1 new obsolescence markers
  obsoleted 1 changesets

Push it. The bundle should not refer to the extinct changeset.

  $ hg init ../other
  $ hg push ../other
  pushing to ../other
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  $ hg -R ../other verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 2 files

Adding a changeset going extinct locally
------------------------------------------

Pull a changeset that will immediatly goes extinct (because you already have a
marker to obsolete him)
(test resolution of issue3788)

  $ hg phase --draft --force f89bcc95eba5
  $ hg phase -R ../other --draft --force f89bcc95eba5
  $ hg commit --amend -m "A''"
  $ hg --hidden --config extensions.mq= strip  --no-backup f89bcc95eba5
  $ hg pull ../other
  pulling from ../other
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 1 files (+1 heads)
  1 new phase-divergent changesets
  new changesets f89bcc95eba5
  (run 'hg heads' to see heads, 'hg merge' to merge)

check that bundle is not affected

  $ hg bundle --hidden --rev f89bcc95eba5 --base "f89bcc95eba5^" ../f89bcc95eba5.hg
  1 changesets found
  $ hg --hidden --config extensions.mq= strip --no-backup f89bcc95eba5
  $ hg unbundle ../f89bcc95eba5.hg
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 1 files (+1 heads)
  (1 other changesets obsolete on arrival)
  (run 'hg heads' to see heads)

check-that bundle can contain markers:

  $ hg bundle --hidden --rev f89bcc95eba5 --base "f89bcc95eba5^" ../f89bcc95eba5-obs.hg --config experimental.evolution.bundle-obsmarker=1
  1 changesets found
  $ hg debugbundle ../f89bcc95eba5.hg
  Stream params: {Compression: BZ}
  changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
      f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  cache:rev-branch-cache -- {} (mandatory: False)
  $ hg debugbundle ../f89bcc95eba5-obs.hg
  Stream params: {Compression: BZ}
  changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
      f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  cache:rev-branch-cache -- {} (mandatory: False)
  obsmarkers -- {} (mandatory: True)
      version: 1 (70 bytes)
      9d73aac1b2ed7d53835eaeec212ed41ea47da53a f89bcc95eba5174b1ccc3e33a82e84c96e8338ee 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

  $ cd ..

pull does not fetch excessive changesets when common node is hidden (issue4982)
-------------------------------------------------------------------------------

initial repo with server and client matching

  $ hg init pull-hidden-common
  $ cd pull-hidden-common
  $ touch foo
  $ hg -q commit -A -m initial
  $ echo 1 > foo
  $ hg commit -m 1
  $ echo 2a > foo
  $ hg commit -m 2a
  $ cd ..
  $ hg clone --pull pull-hidden-common pull-hidden-common-client
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  new changesets 96ee1d7354c4:6a29ed9c68de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

server obsoletes the old head

  $ cd pull-hidden-common
  $ hg -q up -r 1
  $ echo 2b > foo
  $ hg -q commit -m 2b
  $ hg debugobsolete 6a29ed9c68defff1a139e5c6fa9696fb1a75783d bec0734cd68e84477ba7fc1d13e6cff53ab70129
  1 new obsolescence markers
  obsoleted 1 changesets
  $ cd ..

client only pulls down 1 changeset

  $ cd pull-hidden-common-client
  $ hg pull --debug
  pulling from $TESTTMP/pull-hidden-common
  query 1; heads
  searching for changes
  taking quick initial sample
  query 2; still undecided: 2, sample size is: 2
  2 total queries in *.????s (glob)
  1 changesets found
  list of changesets:
  bec0734cd68e84477ba7fc1d13e6cff53ab70129
  listing keys for "bookmarks"
  bundle2-output-bundle: "HG20", 4 parts total
  bundle2-output-part: "changegroup" (params: 1 mandatory 1 advisory) streamed payload
  bundle2-output-part: "listkeys" (params: 1 mandatory) empty payload
  bundle2-output-part: "phase-heads" 24 bytes payload
  bundle2-output-part: "cache:rev-branch-cache" (advisory) streamed payload
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "changegroup" (params: 1 mandatory 1 advisory) supported
  adding changesets
  add changeset bec0734cd68e
  adding manifests
  adding file changes
  adding foo revisions
  bundle2-input-part: total payload size 476
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "phase-heads" supported
  bundle2-input-part: total payload size 24
  bundle2-input-part: "cache:rev-branch-cache" (advisory) supported
  bundle2-input-part: total payload size 39
  bundle2-input-bundle: 4 parts total
  checking for updated bookmarks
  updating the branch cache
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets bec0734cd68e
  (run 'hg heads' to see heads, 'hg merge' to merge)