view tests/test-origbackup-conflict.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

Set up repo

  $ cat << EOF >> $HGRCPATH
  > [ui]
  > origbackuppath=.hg/origbackups
  > [merge]
  > checkunknown=warn
  > EOF
  $ hg init repo
  $ cd repo
  $ echo base > base
  $ hg add base
  $ hg commit -m "base"

Make a dir named b that contains a file, and a file named d

  $ mkdir -p b
  $ echo c1 > b/c
  $ echo d1 > d
  $ hg add b/c d
  $ hg commit -m "c1"
  $ hg bookmark c1

Peform an update that causes b/c to be backed up

  $ hg up -q 0
  $ mkdir -p b
  $ echo c2 > b/c
  $ hg up --verbose c1
  resolving manifests
  b/c: replacing untracked file
  getting b/c
  creating directory: $TESTTMP/repo/.hg/origbackups/b
  getting d
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark c1)
  $ test -f .hg/origbackups/b/c

Make files named b and d

  $ hg up -q 0
  $ echo b1 > b
  $ echo d2 > d
  $ hg add b d
  $ hg commit -m b1
  created new head
  $ hg bookmark b1

Perform an update that causes b to be backed up - it should replace the backup b dir

  $ hg up -q 0
  $ echo b2 > b
  $ hg up --verbose b1
  resolving manifests
  b: replacing untracked file
  getting b
  removing conflicting directory: $TESTTMP/repo/.hg/origbackups/b
  getting d
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark b1)
  $ test -f .hg/origbackups/b

Perform an update the causes b/c to be backed up again - it should replace the backup b file

  $ hg up -q 0
  $ mkdir b
  $ echo c3 > b/c
  $ hg up --verbose c1
  resolving manifests
  b/c: replacing untracked file
  getting b/c
  creating directory: $TESTTMP/repo/.hg/origbackups/b
  removing conflicting file: $TESTTMP/repo/.hg/origbackups/b
  getting d
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark c1)
  $ test -d .hg/origbackups/b

Cause two symlinks to be backed up that points to a valid location from the backup dir

  $ hg up -q 0
  $ mkdir ../sym-link-target
#if symlink
  $ ln -s ../../../sym-link-target b
  $ ln -s ../../../sym-link-target d
#else
  $ touch b d
#endif
  $ hg up b1
  b: replacing untracked file
  d: replacing untracked file
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark b1)
#if symlink
  $ readlink.py .hg/origbackups/b
  .hg/origbackups/b -> ../../../sym-link-target
#endif

Perform an update that causes b/c and d to be backed up again - b/c should not go into the target dir

  $ hg up -q 0
  $ mkdir b
  $ echo c4 > b/c
  $ echo d3 > d
  $ hg up --verbose c1
  resolving manifests
  b/c: replacing untracked file
  d: replacing untracked file
  getting b/c
  creating directory: $TESTTMP/repo/.hg/origbackups/b
  removing conflicting file: $TESTTMP/repo/.hg/origbackups/b
  getting d
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark c1)
  $ cat .hg/origbackups/b/c
  c4
  $ cat .hg/origbackups/d
  d3
  $ ls ../sym-link-target

Incorrectly configure origbackuppath to be under a file

  $ echo data > .hg/badorigbackups
  $ hg up -q 0
  $ mkdir b
  $ echo c5 > b/c
  $ hg up --verbose c1 --config ui.origbackuppath=.hg/badorigbackups
  resolving manifests
  b/c: replacing untracked file
  getting b/c
  creating directory: $TESTTMP/repo/.hg/badorigbackups/b
  removing conflicting file: $TESTTMP/repo/.hg/badorigbackups
  getting d
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark c1)
  $ ls .hg/badorigbackups/b
  c