nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
$ cat > loop.py <<EOF
> from __future__ import absolute_import
> import time
> from mercurial import commands, registrar
>
> cmdtable = {}
> command = registrar.command(cmdtable)
>
> class incrementingtime(object):
> def __init__(self):
> self._time = 0.0
> def __call__(self):
> self._time += 0.25
> return self._time
> time.time = incrementingtime()
>
> @command(b'loop',
> [(b'', b'total', b'', b'override for total'),
> (b'', b'nested', False, b'show nested results'),
> (b'', b'parallel', False, b'show parallel sets of results')],
> b'hg loop LOOPS',
> norepo=True)
> def loop(ui, loops, **opts):
> loops = int(loops)
> total = None
> if loops >= 0:
> total = loops
> if opts.get('total', None):
> total = int(opts.get('total'))
> nested = False
> if opts.get('nested', None):
> nested = True
> loops = abs(loops)
>
> progress = ui.makeprogress(topiclabel, unit=b'loopnum', total=total)
> other = ui.makeprogress(b'other', unit=b'othernum', total=total)
> for i in range(loops):
> progress.update(i, item=getloopitem(i))
> if opts.get('parallel'):
> other.update(i, item=b'other.%d' % i)
> if nested:
> nested_steps = 2
> if i and i % 4 == 0:
> nested_steps = 5
> nested = ui.makeprogress(b'nested', unit=b'nestnum',
> total=nested_steps)
> for j in range(nested_steps):
> nested.update(j, item=b'nested.%d' % j)
> nested.complete()
> progress.complete()
>
> topiclabel = b'loop'
> def getloopitem(i):
> return b'loop.%d' % i
>
> EOF
$ cp $HGRCPATH $HGRCPATH.orig
$ echo "[extensions]" >> $HGRCPATH
$ echo "progress=" >> $HGRCPATH
$ echo "loop=`pwd`/loop.py" >> $HGRCPATH
$ echo "[progress]" >> $HGRCPATH
$ echo "format = topic bar number" >> $HGRCPATH
$ echo "assume-tty=1" >> $HGRCPATH
$ echo "width=60" >> $HGRCPATH
test default params, display nothing because of delay
$ hg -y loop 3
$ echo "delay=0" >> $HGRCPATH
$ echo "refresh=0" >> $HGRCPATH
test with delay=0, refresh=0
$ hg -y loop 3
\r (no-eol) (esc)
loop [ ] 0/3\r (no-eol) (esc)
loop [===============> ] 1/3\r (no-eol) (esc)
loop [===============================> ] 2/3\r (no-eol) (esc)
\r (no-eol) (esc)
no progress with --quiet
$ hg -y loop 3 --quiet
test plain mode exception
$ HGPLAINEXCEPT=progress hg -y loop 1
\r (no-eol) (esc)
loop [ ] 0/1\r (no-eol) (esc)
\r (no-eol) (esc)
test nested short-lived topics (which shouldn't display with nestdelay):
$ hg -y loop 3 --nested
\r (no-eol) (esc)
loop [ ] 0/3\r (no-eol) (esc)
loop [===============> ] 1/3\r (no-eol) (esc)
loop [===============================> ] 2/3\r (no-eol) (esc)
\r (no-eol) (esc)
Test nested long-lived topic which has the same name as a short-lived
peer. We shouldn't get stuck showing the short-lived inner steps, and
should go back to skipping the inner steps when the slow nested step
finishes.
$ hg -y loop 7 --nested
\r (no-eol) (esc)
loop [ ] 0/7\r (no-eol) (esc)
loop [=====> ] 1/7\r (no-eol) (esc)
loop [============> ] 2/7\r (no-eol) (esc)
loop [===================> ] 3/7\r (no-eol) (esc)
loop [==========================> ] 4/7\r (no-eol) (esc)
nested [==========================> ] 3/5\r (no-eol) (esc)
nested [===================================> ] 4/5\r (no-eol) (esc)
loop [=================================> ] 5/7\r (no-eol) (esc)
loop [========================================> ] 6/7\r (no-eol) (esc)
\r (no-eol) (esc)
$ hg --config progress.changedelay=0 -y loop 3 --nested
\r (no-eol) (esc)
loop [ ] 0/3\r (no-eol) (esc)
nested [ ] 0/2\r (no-eol) (esc)
nested [======================> ] 1/2\r (no-eol) (esc)
loop [===============> ] 1/3\r (no-eol) (esc)
nested [ ] 0/2\r (no-eol) (esc)
nested [======================> ] 1/2\r (no-eol) (esc)
loop [===============================> ] 2/3\r (no-eol) (esc)
nested [ ] 0/2\r (no-eol) (esc)
nested [======================> ] 1/2\r (no-eol) (esc)
\r (no-eol) (esc)
test two topics being printed in parallel (as when we're doing a local
--pull clone, where you get the unbundle and bundle progress at the
same time):
$ hg loop 3 --parallel
\r (no-eol) (esc)
loop [ ] 0/3\r (no-eol) (esc)
loop [===============> ] 1/3\r (no-eol) (esc)
loop [===============================> ] 2/3\r (no-eol) (esc)
\r (no-eol) (esc)
test refresh is taken in account
$ hg -y --config progress.refresh=100 loop 3
test format options 1
$ hg -y --config 'progress.format=number topic item+2' loop 2
\r (no-eol) (esc)
0/2 loop lo\r (no-eol) (esc)
1/2 loop lo\r (no-eol) (esc)
\r (no-eol) (esc)
test format options 2
$ hg -y --config 'progress.format=number item-3 bar' loop 2
\r (no-eol) (esc)
0/2 p.0 [ ]\r (no-eol) (esc)
1/2 p.1 [=======================> ]\r (no-eol) (esc)
\r (no-eol) (esc)
test format options and indeterminate progress
$ hg -y --config 'progress.format=number item bar' loop -- -2
\r (no-eol) (esc)
0 loop.0 [ <=> ]\r (no-eol) (esc)
1 loop.1 [ <=> ]\r (no-eol) (esc)
\r (no-eol) (esc)
make sure things don't fall over if count > total
$ hg -y loop --total 4 6
\r (no-eol) (esc)
loop [ ] 0/4\r (no-eol) (esc)
loop [===========> ] 1/4\r (no-eol) (esc)
loop [=======================> ] 2/4\r (no-eol) (esc)
loop [===================================> ] 3/4\r (no-eol) (esc)
loop [===============================================>] 4/4\r (no-eol) (esc)
loop [ <=> ] 5/4\r (no-eol) (esc)
\r (no-eol) (esc)
test immediate progress completion
$ hg -y loop 0
test delay time estimates
#if no-chg
$ cp $HGRCPATH.orig $HGRCPATH
$ echo "[extensions]" >> $HGRCPATH
$ echo "mocktime=$TESTDIR/mocktime.py" >> $HGRCPATH
$ echo "progress=" >> $HGRCPATH
$ echo "loop=`pwd`/loop.py" >> $HGRCPATH
$ echo "[progress]" >> $HGRCPATH
$ echo "assume-tty=1" >> $HGRCPATH
$ echo "delay=25" >> $HGRCPATH
$ echo "width=60" >> $HGRCPATH
$ MOCKTIME=11 hg -y loop 8
\r (no-eol) (esc)
loop [=========> ] 2/8 1m07s\r (no-eol) (esc)
loop [===============> ] 3/8 56s\r (no-eol) (esc)
loop [=====================> ] 4/8 45s\r (no-eol) (esc)
loop [==========================> ] 5/8 34s\r (no-eol) (esc)
loop [================================> ] 6/8 23s\r (no-eol) (esc)
loop [=====================================> ] 7/8 12s\r (no-eol) (esc)
\r (no-eol) (esc)
$ MOCKTIME=10000 hg -y loop 4
\r (no-eol) (esc)
loop [ ] 0/4\r (no-eol) (esc)
loop [=========> ] 1/4 8h21m\r (no-eol) (esc)
loop [====================> ] 2/4 5h34m\r (no-eol) (esc)
loop [==============================> ] 3/4 2h47m\r (no-eol) (esc)
\r (no-eol) (esc)
$ MOCKTIME=1000000 hg -y loop 4
\r (no-eol) (esc)
loop [ ] 0/4\r (no-eol) (esc)
loop [=========> ] 1/4 5w00d\r (no-eol) (esc)
loop [====================> ] 2/4 3w03d\r (no-eol) (esc)
loop [=============================> ] 3/4 11d14h\r (no-eol) (esc)
\r (no-eol) (esc)
$ MOCKTIME=14000000 hg -y loop 4
\r (no-eol) (esc)
loop [ ] 0/4\r (no-eol) (esc)
loop [=========> ] 1/4 1y18w\r (no-eol) (esc)
loop [===================> ] 2/4 46w03d\r (no-eol) (esc)
loop [=============================> ] 3/4 23w02d\r (no-eol) (esc)
\r (no-eol) (esc)
Non-linear progress:
$ MOCKTIME='20 20 20 20 20 20 20 20 20 20 500 500 500 500 500 20 20 20 20 20' hg -y loop 20
\r (no-eol) (esc)
loop [=> ] 1/20 6m21s\r (no-eol) (esc)
loop [===> ] 2/20 6m01s\r (no-eol) (esc)
loop [=====> ] 3/20 5m41s\r (no-eol) (esc)
loop [=======> ] 4/20 5m21s\r (no-eol) (esc)
loop [=========> ] 5/20 5m01s\r (no-eol) (esc)
loop [===========> ] 6/20 4m41s\r (no-eol) (esc)
loop [=============> ] 7/20 4m21s\r (no-eol) (esc)
loop [===============> ] 8/20 4m01s\r (no-eol) (esc)
loop [================> ] 9/20 25m40s\r (no-eol) (esc)
loop [===================> ] 10/20 1h06m\r (no-eol) (esc)
loop [=====================> ] 11/20 1h13m\r (no-eol) (esc)
loop [=======================> ] 12/20 1h07m\r (no-eol) (esc)
loop [========================> ] 13/20 58m19s\r (no-eol) (esc)
loop [===========================> ] 14/20 7m09s\r (no-eol) (esc)
loop [=============================> ] 15/20 3m38s\r (no-eol) (esc)
loop [===============================> ] 16/20 2m15s\r (no-eol) (esc)
loop [=================================> ] 17/20 1m27s\r (no-eol) (esc)
loop [====================================> ] 18/20 52s\r (no-eol) (esc)
loop [======================================> ] 19/20 25s\r (no-eol) (esc)
\r (no-eol) (esc)
Time estimates should not fail when there's no end point:
$ MOCKTIME=11 hg -y loop -- -4
\r (no-eol) (esc)
loop [ <=> ] 2\r (no-eol) (esc)
loop [ <=> ] 3\r (no-eol) (esc)
\r (no-eol) (esc)
#endif
test line trimming by '[progress] width', when progress topic contains
multi-byte characters, of which length of byte sequence and columns in
display are different from each other.
$ cp $HGRCPATH.orig $HGRCPATH
$ cat >> $HGRCPATH <<EOF
> [extensions]
> progress=
> loop=`pwd`/loop.py
> [progress]
> assume-tty = 1
> delay = 0
> refresh = 0
> EOF
$ rm -f loop.pyc
$ cat >> loop.py <<EOF
> # use non-ascii characters as topic label of progress
> # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
> topiclabel = u'\u3042\u3044\u3046\u3048'.encode('utf-8')
> EOF
$ cat >> $HGRCPATH <<EOF
> [progress]
> format = topic number
> width= 12
> EOF
$ hg --encoding utf-8 -y loop --total 3 3
\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 0/3\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 1/3\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 2/3\r (no-eol) (esc)
\r (no-eol) (esc)
test calculation of bar width, when progress topic contains multi-byte
characters, of which length of byte sequence and columns in display
are different from each other.
$ cat >> $HGRCPATH <<EOF
> [progress]
> format = topic bar
> width= 21
> # progwidth should be 9 (= 21 - (8+1) - 3)
> EOF
$ hg --encoding utf-8 -y loop --total 3 3
\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [ ]\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [==> ]\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [=====> ]\r (no-eol) (esc)
\r (no-eol) (esc)
test trimming progress items, when they contain multi-byte characters,
of which length of byte sequence and columns in display are different
from each other.
$ rm -f loop.pyc
$ rm -Rf __pycache__
$ cat >> loop.py <<EOF
> # use non-ascii characters as loop items of progress
> loopitems = [
> u'\u3042\u3044'.encode('utf-8'), # 2 x 2 = 4 columns
> u'\u3042\u3044\u3046'.encode('utf-8'), # 2 x 3 = 6 columns
> u'\u3042\u3044\u3046\u3048'.encode('utf-8'), # 2 x 4 = 8 columns
> ]
> def getloopitem(i):
> return loopitems[i % len(loopitems)]
> EOF
$ cat >> $HGRCPATH <<EOF
> [progress]
> # trim at tail side
> format = item+6
> EOF
$ hg --encoding utf-8 -y loop --total 3 3
\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84 \r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
\r (no-eol) (esc)
$ cat >> $HGRCPATH <<EOF
> [progress]
> # trim at left side
> format = item-6
> EOF
$ hg --encoding utf-8 -y loop --total 3 3
\r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84 \r (no-eol) (esc)
\xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88\r (no-eol) (esc)
\r (no-eol) (esc)