Mercurial > hg
view tests/test-pull-branch.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | d0abd7949ea3 |
children |
line wrap: on
line source
$ hg init t $ cd t $ echo 1 > foo $ hg ci -Am1 # 0 adding foo $ hg branch branchA marked working directory as branch branchA (branches are permanent and global, did you want a bookmark?) $ echo a1 > foo $ hg ci -ma1 # 1 $ cd .. $ hg init tt $ cd tt $ hg pull ../t pulling from ../t requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files new changesets 495a0ec48aaf:50e089d141b7 (run 'hg update' to get a working copy) $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd ../t $ echo a2 > foo $ hg ci -ma2 # 2 Create branch B: $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branchB marked working directory as branch branchB $ echo b1 > foo $ hg ci -mb1 # 3 $ cd ../tt A new branch is there $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files (+1 heads) new changesets 9f878dea0b96:5be59ce5067b 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Develop both branches: $ cd ../t $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a3 > foo $ hg ci -ma3 # 4 $ hg up branchB 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b2 > foo $ hg ci -mb2 # 5 $ cd ../tt Should succeed, no new heads: $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files new changesets 7c8fe7e20c32:453e93fa00a5 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Add a head on other branch: $ cd ../t $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a4 > foo $ hg ci -ma4 # 6 $ hg up branchB 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b3.1 > foo $ hg ci -m b3.1 # 7 $ hg up 5 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b3.2 > foo $ hg ci -m b3.2 # 8 created new head $ cd ../tt Should succeed because there is only one head on our branch: $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 1 files (+1 heads) new changesets da3a8a0161c6:b61cab8fe4e8 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd ../t $ hg up -C branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a5.1 > foo $ hg ci -ma5.1 # 9 $ hg up 6 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a5.2 > foo $ hg ci -ma5.2 # 10 created new head $ hg up 7 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b4.1 > foo $ hg ci -m b4.1 # 11 $ hg up -C 8 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b4.2 > foo $ hg ci -m b4.2 # 12 $ cd ../tt $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 4 changesets with 4 changes to 1 files (+1 heads) new changesets 0c4d148ae29e:ecfc3f4a6fd9 1 files updated, 0 files merged, 0 files removed, 0 files unresolved updated to "d740e1a584e7: a5.2" 1 other heads for branch "branchA" Make changes on new branch on tt $ hg up 6 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branchC marked working directory as branch branchC $ echo b1 > bar $ hg ci -Am "commit on branchC on tt" adding bar Make changes on default branch on t $ cd ../t $ hg up -C default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar $ hg ci -Am "commit on default on t" adding bar Pull branchC from tt $ hg pull ../tt pulling from ../tt searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) new changesets 7d8ffa4c0b22 13 local changesets published (run 'hg heads' to see heads) Make changes on default and branchC on tt $ cd ../tt $ hg pull ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) new changesets 2b94b54b6b5f 1 local changesets published (run 'hg heads' to see heads) $ hg up -C default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar1 $ hg ci -Am "commit on default on tt" adding bar1 $ hg up branchC 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo a1 > bar2 $ hg ci -Am "commit on branchC on tt" adding bar2 Make changes on default and branchC on t $ cd ../t $ hg up default 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar3 $ hg ci -Am "commit on default on t" adding bar3 $ hg up branchC 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo a1 > bar4 $ hg ci -Am "commit on branchC on tt" adding bar4 Pull from tt $ hg pull ../tt pulling from ../tt searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+2 heads) new changesets eed40c14b407:e634733b0309 1 local changesets published (run 'hg heads .' to see heads, 'hg merge' to merge) $ cd ..