view tests/test-push-cgi.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

#require no-msys # MSYS will translate web paths as if they were file paths

This is a test of the push wire protocol over CGI-based hgweb.

initialize repository

  $ hg init r
  $ cd r
  $ echo a > a
  $ hg ci -A -m "0"
  adding a
  $ echo '[web]' > .hg/hgrc
  $ echo 'allow_push = *' >> .hg/hgrc
  $ echo 'push_ssl = false' >> .hg/hgrc

create hgweb invocation script

  $ cat >hgweb.cgi <<HGWEB
  > import cgitb
  > cgitb.enable()
  > from mercurial import demandimport; demandimport.enable()
  > from mercurial.hgweb import hgweb
  > from mercurial.hgweb import wsgicgi
  > application = hgweb(b'.', b'test repository')
  > wsgicgi.launch(application)
  > HGWEB
  $ chmod 755 hgweb.cgi

test preparation

  $ . "$TESTDIR/cgienv"
  $ REQUEST_METHOD="POST"; export REQUEST_METHOD
  $ CONTENT_TYPE="application/octet-stream"; export CONTENT_TYPE
  $ hg bundle --type v1 --all bundle.hg
  1 changesets found
  $ CONTENT_LENGTH=279; export CONTENT_LENGTH;

expect failure because heads doesn't match (formerly known as 'unsynced changes')

  $ QUERY_STRING="cmd=unbundle&heads=0000000000000000000000000000000000000000"; export QUERY_STRING
  $ "$PYTHON" hgweb.cgi <bundle.hg >page1 2>&1
  $ cat page1
  Status: 200 Script output follows\r (esc)
  Content-Type: application/mercurial-0.1\r (esc)
  Content-Length: 64\r (esc)
  \r (esc)
  0
  repository changed while preparing changes - please try again

successful force push

  $ QUERY_STRING="cmd=unbundle&heads=666f726365"; export QUERY_STRING
  $ "$PYTHON" hgweb.cgi <bundle.hg >page2 2>&1
  $ cat page2
  Status: 200 Script output follows\r (esc)
  Content-Type: application/mercurial-0.1\r (esc)
  Content-Length: 102\r (esc)
  \r (esc)
  1
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 0 changes to 1 files

successful push, list of heads

  $ QUERY_STRING="cmd=unbundle&heads=f7b1eb17ad24730a1651fccd46c43826d1bbc2ac"; export QUERY_STRING
  $ "$PYTHON" hgweb.cgi <bundle.hg >page3 2>&1
  $ cat page3
  Status: 200 Script output follows\r (esc)
  Content-Type: application/mercurial-0.1\r (esc)
  Content-Length: 102\r (esc)
  \r (esc)
  1
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 0 changes to 1 files

successful push, SHA1 hash of heads (unbundlehash capability)

  $ QUERY_STRING="cmd=unbundle&heads=686173686564 5a785a5f9e0d433b88ed862b206b011b0c3a9d13"; export QUERY_STRING
  $ "$PYTHON" hgweb.cgi <bundle.hg >page4 2>&1
  $ cat page4
  Status: 200 Script output follows\r (esc)
  Content-Type: application/mercurial-0.1\r (esc)
  Content-Length: 102\r (esc)
  \r (esc)
  1
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 0 changes to 1 files

  $ cd ..