view tests/test-push-checkheads-superceed-A7.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

====================================
Testing head checking code: Case A-7
====================================

Mercurial checks for the introduction of new heads on push. Evolution comes
into play to detect if existing branches on the server are being replaced by
some of the new one we push.

This case is part of a series of tests checking this behavior.

Category A: simple case involving a branch being superceeded by another.
TestCase 7: multi-changeset branch, split on multiple other, (head on its own branch), same number of head

.. old-state:
..
.. * 2 branch (1-changeset, and 2-changesets)
..
.. new-state:
..
.. * 1 new branch superceeding the head of the old-2-changesets-branch,
.. * 1 new changesets on the old-1-changeset-branch superceeding the base of the other
..
.. expected-result:
..
.. * push allowed
..
.. graph-summary:
..
..   B ø⇠◔ B'
..     | |
.. A'◔⇢ø |
..   | |/
.. C ● |
..    \|
..     ●

  $ . $TESTDIR/testlib/push-checkheads-util.sh

Test setup
----------

  $ mkdir A7
  $ cd A7
  $ setuprepos
  creating basic server and client repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd server
  $ mkcommit B0
  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkcommit C0
  created new head
  $ cd ../client
  $ hg pull
  pulling from $TESTTMP/A7/server
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)
  new changesets d73caddc5533:0f88766e02d6 (2 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up 'desc(C0)'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkcommit A1
  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid "desc(A0)" ` `getid "desc(A1)"`
  1 new obsolescence markers
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete `getid "desc(B0)" ` `getid "desc(B1)"`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  25c56d33e4c4 (draft): B1
  |
  | o  a0802eb7fc1b (draft): A1
  | |
  | o  0f88766e02d6 (draft): C0
  |/
  | x  d73caddc5533 (draft): B0
  | |
  | x  8aaa48160adc (draft): A0
  |/
  o  1e4be0697311 (public): root
  

Actual testing
--------------

  $ hg push
  pushing to $TESTTMP/A7/server
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)
  2 new obsolescence markers
  obsoleted 2 changesets

  $ cd ../..