Mercurial > hg
view tests/test-rebase-cache.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | 4edd427f34c1 |
children | f90a5c211251 |
line wrap: on
line source
$ cat >> $HGRCPATH <<EOF > [extensions] > rebase= > mq= > > [phases] > publish=False > > [alias] > tglog = log -G --template "{rev}: '{desc}' {branches}\n" > theads = heads --template "{rev}: '{desc}' {branches}\n" > EOF $ hg init a $ cd a $ echo a > a $ hg ci -Am A adding a $ hg branch branch1 marked working directory as branch branch1 (branches are permanent and global, did you want a bookmark?) $ hg ci -m 'branch1' $ echo b > b $ hg ci -Am B adding b $ hg up -q 0 $ hg branch branch2 marked working directory as branch branch2 $ hg ci -m 'branch2' $ echo c > C $ hg ci -Am C adding C $ hg up -q 2 $ hg branch -f branch2 marked working directory as branch branch2 $ echo d > d $ hg ci -Am D adding d created new head $ echo e > e $ hg ci -Am E adding e $ hg update default 0 files updated, 0 files merged, 3 files removed, 0 files unresolved $ hg branch branch3 marked working directory as branch branch3 $ hg ci -m 'branch3' $ echo f > f $ hg ci -Am F adding f $ cd .. Rebase part of branch2 (5-6) onto branch3 (8): $ hg clone -q -u . a a1 $ cd a1 $ hg tglog @ 8: 'F' branch3 | o 7: 'branch3' branch3 | | o 6: 'E' branch2 | | | o 5: 'D' branch2 | | | | o 4: 'C' branch2 | | | +---o 3: 'branch2' branch2 | | | o 2: 'B' branch1 | | | o 1: 'branch1' branch1 |/ o 0: 'A' $ hg branches branch3 8:4666b71e8e32 branch2 6:5097051d331d branch1 2:0a03079c47fd (inactive) default 0:1994f17a630e (inactive) $ hg theads 8: 'F' branch3 6: 'E' branch2 4: 'C' branch2 2: 'B' branch1 0: 'A' $ hg rebase -s 5 -d 8 rebasing 5:635859577d0b "D" rebasing 6:5097051d331d "E" saved backup bundle to $TESTTMP/a1/.hg/strip-backup/635859577d0b-89160bff-rebase.hg $ hg branches branch3 8:466cdfb14b62 branch2 4:e4fdb121d036 branch1 2:0a03079c47fd default 0:1994f17a630e (inactive) $ hg theads 8: 'E' branch3 4: 'C' branch2 2: 'B' branch1 0: 'A' $ hg tglog o 8: 'E' branch3 | o 7: 'D' branch3 | @ 6: 'F' branch3 | o 5: 'branch3' branch3 | | o 4: 'C' branch2 | | | o 3: 'branch2' branch2 |/ | o 2: 'B' branch1 | | | o 1: 'branch1' branch1 |/ o 0: 'A' $ cd .. Rebase head of branch3 (8) onto branch2 (6): $ hg clone -q -u . a a2 $ cd a2 $ hg tglog @ 8: 'F' branch3 | o 7: 'branch3' branch3 | | o 6: 'E' branch2 | | | o 5: 'D' branch2 | | | | o 4: 'C' branch2 | | | +---o 3: 'branch2' branch2 | | | o 2: 'B' branch1 | | | o 1: 'branch1' branch1 |/ o 0: 'A' $ hg rebase -s 8 -d 6 rebasing 8:4666b71e8e32 "F" (tip) saved backup bundle to $TESTTMP/a2/.hg/strip-backup/4666b71e8e32-fc1c4e96-rebase.hg $ hg branches branch2 8:6b4bdc1b5ac0 branch3 7:653b9feb4616 branch1 2:0a03079c47fd (inactive) default 0:1994f17a630e (inactive) $ hg theads 8: 'F' branch2 7: 'branch3' branch3 4: 'C' branch2 2: 'B' branch1 0: 'A' $ hg tglog @ 8: 'F' branch2 | | o 7: 'branch3' branch3 | | o | 6: 'E' branch2 | | o | 5: 'D' branch2 | | | | o 4: 'C' branch2 | | | | | o 3: 'branch2' branch2 | |/ o | 2: 'B' branch1 | | o | 1: 'branch1' branch1 |/ o 0: 'A' $ hg verify -q $ cd .. Rebase entire branch3 (7-8) onto branch2 (6): $ hg clone -q -u . a a3 $ cd a3 $ hg tglog @ 8: 'F' branch3 | o 7: 'branch3' branch3 | | o 6: 'E' branch2 | | | o 5: 'D' branch2 | | | | o 4: 'C' branch2 | | | +---o 3: 'branch2' branch2 | | | o 2: 'B' branch1 | | | o 1: 'branch1' branch1 |/ o 0: 'A' $ hg rebase -s 7 -d 6 rebasing 7:653b9feb4616 "branch3" note: not rebasing 7:653b9feb4616 "branch3", its destination already has all its changes rebasing 8:4666b71e8e32 "F" (tip) saved backup bundle to $TESTTMP/a3/.hg/strip-backup/653b9feb4616-3c88de16-rebase.hg $ hg branches branch2 7:6b4bdc1b5ac0 branch1 2:0a03079c47fd (inactive) default 0:1994f17a630e (inactive) $ hg theads 7: 'F' branch2 4: 'C' branch2 2: 'B' branch1 0: 'A' $ hg tglog @ 7: 'F' branch2 | o 6: 'E' branch2 | o 5: 'D' branch2 | | o 4: 'C' branch2 | | | o 3: 'branch2' branch2 | | o | 2: 'B' branch1 | | o | 1: 'branch1' branch1 |/ o 0: 'A' $ hg verify -q Stripping multiple branches in one go bypasses the fast-case code to update the branch cache. $ hg strip 2 0 files updated, 0 files merged, 4 files removed, 0 files unresolved saved backup bundle to $TESTTMP/a3/.hg/strip-backup/0a03079c47fd-11b7c407-backup.hg $ hg tglog o 3: 'C' branch2 | o 2: 'branch2' branch2 | | @ 1: 'branch1' branch1 |/ o 0: 'A' $ hg branches branch2 3:e4fdb121d036 branch1 1:63379ac49655 default 0:1994f17a630e (inactive) $ hg theads 3: 'C' branch2 1: 'branch1' branch1 0: 'A' Fast path branchcache code should not be invoked if branches stripped is not the same as branches remaining. $ hg init b $ cd b $ hg branch branch1 marked working directory as branch branch1 (branches are permanent and global, did you want a bookmark?) $ hg ci -m 'branch1' $ hg branch branch2 marked working directory as branch branch2 $ hg ci -m 'branch2' $ hg branch -f branch1 marked working directory as branch branch1 $ echo a > A $ hg ci -Am A adding A created new head $ hg tglog @ 2: 'A' branch1 | o 1: 'branch2' branch2 | o 0: 'branch1' branch1 $ hg theads 2: 'A' branch1 1: 'branch2' branch2 $ hg strip 2 0 files updated, 0 files merged, 1 files removed, 0 files unresolved saved backup bundle to $TESTTMP/a3/b/.hg/strip-backup/a5b4b27ed7b4-a3b6984e-backup.hg $ hg theads 1: 'branch2' branch2 0: 'branch1' branch1 Make sure requesting to strip a revision already stripped does not confuse things. Try both orders. $ cd .. $ hg init c $ cd c $ echo a > a $ hg ci -Am A adding a $ echo b > b $ hg ci -Am B adding b $ echo c > c $ hg ci -Am C adding c $ echo d > d $ hg ci -Am D adding d $ echo e > e $ hg ci -Am E adding e $ hg tglog @ 4: 'E' | o 3: 'D' | o 2: 'C' | o 1: 'B' | o 0: 'A' $ hg strip 3 4 0 files updated, 0 files merged, 2 files removed, 0 files unresolved saved backup bundle to $TESTTMP/a3/c/.hg/strip-backup/67a385d4e6f2-b9243789-backup.hg $ hg theads 2: 'C' $ hg strip 2 1 0 files updated, 0 files merged, 2 files removed, 0 files unresolved saved backup bundle to $TESTTMP/a3/c/.hg/strip-backup/6c81ed0049f8-a687065f-backup.hg $ hg theads 0: 'A' Make sure rebase does not break for phase/filter related reason ---------------------------------------------------------------- (issue3858) $ cd .. $ cat >> $HGRCPATH << EOF > [ui] > logtemplate={rev} {desc} {phase}\n > EOF $ hg init c4 $ cd c4 $ echo a > a $ hg ci -Am A adding a $ echo b > b $ hg ci -Am B adding b $ hg up 0 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo c > c $ hg ci -Am C adding c created new head $ hg up 1 1 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg merge 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -m d $ hg up 2 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo e > e $ hg ci -Am E adding e created new head $ hg merge 3 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -m F $ hg up 3 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo g > g $ hg ci -Am G adding g created new head $ echo h > h $ hg ci -Am H adding h $ hg up 5 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ echo i > i $ hg ci -Am I adding i Turn most changeset public $ hg ph -p 7 $ hg heads 8 I draft 7 H public $ hg log -G @ 8 I draft | | o 7 H public | | | o 6 G public | | o | 5 F draft |\| o | 4 E draft | | | o 3 d public |/| o | 2 C public | | | o 1 B public |/ o 0 A public $ cat > $TESTTMP/checkeditform.sh <<EOF > env | grep HGEDITFORM > true > EOF $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg rebase --dest 7 --source 5 -e rebasing 5:361a99976cc9 "F" HGEDITFORM=rebase.merge rebasing 8:326cfedc031c "I" (tip) HGEDITFORM=rebase.normal saved backup bundle to $TESTTMP/a3/c4/.hg/strip-backup/361a99976cc9-35e980d0-rebase.hg