nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
test merging things outside of the sparse checkout
$ hg init myrepo
$ cd myrepo
$ cat > .hg/hgrc <<EOF
> [extensions]
> sparse=
> EOF
$ echo foo > foo
$ echo bar > bar
$ hg add foo bar
$ hg commit -m initial
$ hg branch feature
marked working directory as branch feature
(branches are permanent and global, did you want a bookmark?)
$ echo bar2 >> bar
$ hg commit -m 'feature - bar2'
$ hg update -q default
$ hg debugsparse --exclude 'bar**'
$ hg merge feature
temporarily included 1 file(s) in the sparse checkout for merging
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
Verify bar was merged temporarily
$ ls
bar
foo
$ hg status
M bar
Verify bar disappears automatically when the working copy becomes clean
$ hg commit -m "merged"
cleaned up 1 temporarily added file(s) from the sparse checkout
$ hg status
$ ls
foo
$ hg cat -r . bar
bar
bar2
Test merging things outside of the sparse checkout that are not in the working
copy
$ hg strip -q -r . --config extensions.strip=
$ hg up -q feature
$ touch branchonly
$ hg ci -Aqm 'add branchonly'
$ hg up -q default
$ hg debugsparse -X branchonly
$ hg merge feature
temporarily included 2 file(s) in the sparse checkout for merging
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cd ..
Tests merging a file which is modified in one branch and deleted in another and
file is excluded from sparse checkout
$ hg init ytest
$ cd ytest
$ echo "syntax: glob" >> .hgignore
$ echo "*.orig" >> .hgignore
$ hg ci -Aqm "added .hgignore"
$ for ch in a d; do echo foo > $ch; hg ci -Aqm "added "$ch; done;
$ cat >> .hg/hgrc <<EOF
> [alias]
> glog = log -GT "{rev}:{node|short} {desc}"
> [extensions]
> sparse =
> EOF
$ hg glog
@ 2:f29feff37cfc added d
|
o 1:617125d27d6b added a
|
o 0:53f3774ed939 added .hgignore
$ hg rm d
$ hg ci -m "removed d"
$ hg up '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugsparse --reset
$ echo bar >> d
$ hg ci -Am "added bar to d"
created new head
$ hg glog
@ 4:6527874a90e4 added bar to d
|
| o 3:372c8558de45 removed d
|/
o 2:f29feff37cfc added d
|
o 1:617125d27d6b added a
|
o 0:53f3774ed939 added .hgignore
$ hg debugsparse --exclude "d"
$ ls
a
$ hg merge
temporarily included 1 file(s) in the sparse checkout for merging
file 'd' was deleted in other [merge rev] but was modified in local [working copy].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cd ..
Testing merging of a file which is renamed+modified on one side and modified on
another
$ hg init mvtest
$ cd mvtest
$ echo "syntax: glob" >> .hgignore
$ echo "*.orig" >> .hgignore
$ hg ci -Aqm "added .hgignore"
$ for ch in a d; do echo foo > $ch; hg ci -Aqm "added "$ch; done;
$ cat >> .hg/hgrc <<EOF
> [alias]
> glog = log -GT "{rev}:{node|short} {desc}"
> [extensions]
> sparse =
> EOF
$ hg glog
@ 2:f29feff37cfc added d
|
o 1:617125d27d6b added a
|
o 0:53f3774ed939 added .hgignore
$ echo babar >> a
$ hg ci -m "added babar to a"
$ hg up '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg mv a amove
$ hg ci -m "moved a to amove"
created new head
$ hg up 3
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg glog
o 4:5d1e85955f6d moved a to amove
|
| @ 3:a06e41a6c16c added babar to a
|/
o 2:f29feff37cfc added d
|
o 1:617125d27d6b added a
|
o 0:53f3774ed939 added .hgignore
$ hg debugsparse --exclude "a"
$ ls
d
$ hg merge
temporarily included 1 file(s) in the sparse checkout for merging
merging a and amove to amove
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg up -C 4
cleaned up 1 temporarily added file(s) from the sparse checkout
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge
merging amove and a to amove
abort: cannot add 'a' - it is outside the sparse checkout
(include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
[255]