view tests/test-tools.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

Tests of the file helper tool

  $ f -h
  ?sage: f [options] [filenames] (glob)
  
  ?ptions: (glob)
    -h, --help            show this help message and exit
    -t, --type            show file type (file or directory)
    -m, --mode            show file mode
    -l, --links           show number of links
    -s, --size            show size of file
    -n NEWER, --newer=NEWER
                          check if file is newer (or same)
    -r, --recurse         recurse into directories
    -S, --sha1            show sha1 hash of the content
    --sha256              show sha256 hash of the content
    -M, --md5             show md5 hash of the content
    -D, --dump            dump file content
    -H, --hexdump         hexdump file content
    -B BYTES, --bytes=BYTES
                          number of characters to dump
    -L LINES, --lines=LINES
                          number of lines to dump
    -q, --quiet           no default output

  $ mkdir dir
  $ cd dir

  $ f --size
  size=0

  $ echo hello | f --md5 --size
  size=6, md5=b1946ac92492d2347c6235b4d2611184

  $ f foo
  foo: file not found

  $ echo foo > foo
  $ f foo
  foo:

  $ f --sha1 foo
  foo: sha1=f1d2d2f924e986ac86fdf7b36c94bcdf32beec15

  $ f --sha256 foo
  foo: sha256=b5bb9d8014a0f9b1d61e21e796d78dccdf1352f23cd32812f4850b878ae4944c

#if symlink
  $ f foo --mode
  foo: mode=644
#endif

#if no-windows
  $ "$PYTHON" $TESTDIR/seq.py 10 > bar
#else
Convert CRLF -> LF for consistency
  $ "$PYTHON" $TESTDIR/seq.py 10 | sed "s/$//" > bar
#endif

#if unix-permissions symlink
  $ chmod +x bar
  $ f bar --newer foo --mode --type --size --dump --links --bytes 7
  bar: file, size=21, mode=755, links=1, newer than foo
  >>>
  1
  2
  3
  4
  <<< no trailing newline
#endif

#if unix-permissions
  $ ln bar baz
  $ f bar -n baz -l --hexdump -t --sha1 --lines=9 -B 20
  bar: file, links=2, newer than baz, sha1=612ca68d0305c821750a
  0000: 31 0a 32 0a 33 0a 34 0a 35 0a 36 0a 37 0a 38 0a |1.2.3.4.5.6.7.8.|
  0010: 39 0a                                           |9.|
  $ rm baz
#endif

#if unix-permissions symlink
  $ ln -s yadda l
  $ f . --recurse -MStmsB4
  .: directory with 3 files, mode=755
  ./bar: file, size=21, mode=755, md5=3b03, sha1=612c
  ./foo: file, size=4, mode=644, md5=d3b0, sha1=f1d2
  ./l: link, size=5, md5=2faa, sha1=af93
#endif

  $ f --quiet bar -DL 3
  1
  2
  3

  $ cd ..

Yadda is a symlink
  $ f -qr dir -HB 17
  dir: directory with 3 files (symlink !)
  dir: directory with 2 files (no-symlink !)
  dir/bar:
  0000: 31 0a 32 0a 33 0a 34 0a 35 0a 36 0a 37 0a 38 0a |1.2.3.4.5.6.7.8.|
  0010: 39                                              |9|
  dir/foo:
  0000: 66 6f 6f 0a                                     |foo.|
  dir/l: (symlink !)
  0000: 79 61 64 64 61                                  |yadda| (symlink !)