Mercurial > hg
view tests/test-treediscovery.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | b4b7427b5786 |
children | ed84a4d48910 |
line wrap: on
line source
Tests discovery against servers without getbundle support: $ CAP="getbundle bundle2" $ . "$TESTDIR/notcapable" $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > killdaemons.py > [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log > rm access.log errors.log > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files new changesets d57206cc072a:a19bfa7e7328 (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets d57206cc072a:d8f638ac69e9 updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets a7892891da29:a19bfa7e7328 (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Remote is empty: $ tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Local is superset: $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets d57206cc072a:d8f638ac69e9 updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Partial pull: $ tstart main $ hg clone $remote partial --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets d57206cc072a:d8f638ac69e9 updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg pull $remote --rev name1 pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) new changesets a7892891da29:e71dbbc70e03 (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ cd .. $ tstop Both have new stuff in new named branches: $ hg clone main repo1a --rev name1 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev name2 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) new changesets a7892891da29:e71dbbc70e03 (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop $ tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) new changesets a7892891da29:e71dbbc70e03 (run 'hg heads' to see heads) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop Both have new stuff in existing named branches: $ rm -r repo1a repo1b repo2a repo2b $ hg clone main repo1a --rev 3 --rev 8 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev 4 --rev 7 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files new changesets d8f638ac69e9 (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop $ tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files new changesets d8f638ac69e9 (run 'hg update' to get a working copy) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. #if zstd $ tstop show "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull #else $ tstop show "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull #endif