view tests/test-wireproto-exchangev2-shallow.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

#require sqlite

Tests for wire protocol version 2 exchange.
Tests in this file should be folded into existing tests once protocol
v2 has enough features that it can be enabled via #testcase in existing
tests.

  $ . $TESTDIR/wireprotohelpers.sh
  $ enablehttpv2client
  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > sqlitestore =
  > pullext = $TESTDIR/pullext.py
  > [storage]
  > new-repo-backend=sqlite
  > EOF

Configure a server

  $ hg init server-basic
  $ enablehttpv2 server-basic
  $ cd server-basic
  $ mkdir dir0 dir1
  $ echo a0 > a
  $ echo b0 > b
  $ hg -q commit -A -m 'commit 0'
  $ echo c0 > dir0/c
  $ echo d0 > dir0/d
  $ hg -q commit -A -m 'commit 1'
  $ echo e0 > dir1/e
  $ echo f0 > dir1/f
  $ hg -q commit -A -m 'commit 2'
  $ echo c1 > dir0/c
  $ echo e1 > dir1/e
  $ hg commit -m 'commit 3'
  $ echo c2 > dir0/c
  $ echo e2 > dir1/e
  $ echo f1 > dir1/f
  $ hg commit -m 'commit 4'
  $ echo a1 > a
  $ echo b1 > b
  $ hg commit -m 'commit 5'

  $ hg log -G -T '{node} {desc}'
  @  93a8bd067ed2840d9aa810ad598168383a3a2c3a commit 5
  |
  o  dc666cf9ecf3d94e6b830f30e5f1272e2a9164d9 commit 4
  |
  o  97765fc3cd624fd1fa0176932c21ffd16adf432e commit 3
  |
  o  47fe012ab237a8c7fc0c78f9f26d5866eef3f825 commit 2
  |
  o  b709380892b193c1091d3a817f706052e346821b commit 1
  |
  o  3390ef850073fbc2f0dfff2244342c8e9229013a commit 0
  
  $ hg serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ cd ..

Shallow clone pulls down latest revision of every file

  $ hg --debug clone --depth 1 http://localhost:$HGPORT client-shallow-1
  using http://localhost:$HGPORT/
  sending capabilities command
  query 1; heads
  sending 2 commands
  sending command heads: {}
  sending command known: {
    'nodes': []
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=22; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  received frame(size=11; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command changesetdata: {
    'fields': set([
      'bookmarks',
      'parents',
      'phase',
      'revision'
    ]),
    'revisions': [
      {
        'heads': [
          '\x93\xa8\xbd\x06~\xd2\x84\r\x9a\xa8\x10\xadY\x81h8::,:'
        ],
        'roots': [],
        'type': 'changesetdagrange'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1170; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  add changeset 3390ef850073
  add changeset b709380892b1
  add changeset 47fe012ab237
  add changeset 97765fc3cd62
  add changeset dc666cf9ecf3
  add changeset 93a8bd067ed2
  checking for updated bookmarks
  sending 1 commands
  sending command manifestdata: {
    'fields': set([
      'parents',
      'revision'
    ]),
    'haveparents': True,
    'nodes': [
      '\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A',
      '|2 \x1a\xa3\xa1R\xa9\xe6\xa9"+?\xa8\xd0\xe3\x0f\xc2V\xe8',
      '\x8d\xd0W<\x7f\xaf\xe2\x04F\xcc\xea\xac\x05N\xea\xa4x\x91M\xdb',
      '113\x85\xf2!\x8b\x08^\xb2Z\x821\x1e*\xdd\x0e\xeb\x8c3',
      'H]O\xc2`\xef\\\xb9\xc0p6\x88K\x00k\x11\x0ej\xdby',
      '\xd9;\xc4\x0b\x0e*GMp\xee\xf7}^\x91/f\x7fSd\x83'
    ],
    'tree': ''
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1515; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command filesdata: {
    'fields': set([
      'linknode',
      'parents',
      'revision'
    ]),
    'haveparents': False,
    'revisions': [
      {
        'nodes': [
          '\x93\xa8\xbd\x06~\xd2\x84\r\x9a\xa8\x10\xadY\x81h8::,:'
        ],
        'type': 'changesetexplicit'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1005; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  updating the branch cache
  new changesets 3390ef850073:93a8bd067ed2
  updating to branch default
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: 93a8bd067ed2
   a: remote created -> g
  getting a
   b: remote created -> g
  getting b
   dir0/c: remote created -> g
  getting dir0/c
   dir0/d: remote created -> g
  getting dir0/d
   dir1/e: remote created -> g
  getting dir1/e
   dir1/f: remote created -> g
  getting dir1/f
  6 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (sent 5 HTTP requests and * bytes; received * bytes in responses) (glob)

  $ sqlite3 -line client-shallow-1/.hg/store/db.sqlite << EOF
  > SELECT id, path, revnum, node, p1rev, p2rev, linkrev, flags FROM filedata ORDER BY id ASC;
  > EOF
       id = 1
     path = a
   revnum = 0
     node = \x9a8\x12)\x97\xb3\xac\x97\xbe*\x9a\xa2\xe5V\x83\x83A\xfd\xf2\xcc (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 2
  
       id = 2
     path = b
   revnum = 0
     node = \xb1zk\xd3g=\x9a\xb8\xce\xd5\x81\xa2	\xf6/=\xa5\xccEx (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 2
  
       id = 3
     path = dir0/c
   revnum = 0
     node = I\x1d\xa1\xbb\x89\xeax\xc0\xc0\xa2s[\x16\xce}\x93\x1d\xc8\xe2\r (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 2
  
       id = 4
     path = dir0/d
   revnum = 0
     node = S\x82\x06\xdc\x97\x1eR\x15@\xd6\x84:\xbf\xe6\xd1`2\xf6\xd4& (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 0
  
       id = 5
     path = dir1/e
   revnum = 0
     node = ]\xf3\xac\xd8\xd0\xc7\xfaP\x98\xd0'\x9a\x044\xc3\x02\x9e+x\xe1 (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 2
  
       id = 6
     path = dir1/f
   revnum = 0
     node = (\xc7v\xae\x08\xd0\xd5^\xb4\x06H\xb4\x01\xb9\x0f\xf5DH4\x8e (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 2

Test a shallow clone with only some files

  $ hg --debug clone --depth 1 --include dir0/ http://localhost:$HGPORT client-shallow-narrow-1
  using http://localhost:$HGPORT/
  sending capabilities command
  query 1; heads
  sending 2 commands
  sending command heads: {}
  sending command known: {
    'nodes': []
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=22; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  received frame(size=11; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command changesetdata: {
    'fields': set([
      'bookmarks',
      'parents',
      'phase',
      'revision'
    ]),
    'revisions': [
      {
        'heads': [
          '\x93\xa8\xbd\x06~\xd2\x84\r\x9a\xa8\x10\xadY\x81h8::,:'
        ],
        'roots': [],
        'type': 'changesetdagrange'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1170; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  add changeset 3390ef850073
  add changeset b709380892b1
  add changeset 47fe012ab237
  add changeset 97765fc3cd62
  add changeset dc666cf9ecf3
  add changeset 93a8bd067ed2
  checking for updated bookmarks
  sending 1 commands
  sending command manifestdata: {
    'fields': set([
      'parents',
      'revision'
    ]),
    'haveparents': True,
    'nodes': [
      '\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A',
      '|2 \x1a\xa3\xa1R\xa9\xe6\xa9"+?\xa8\xd0\xe3\x0f\xc2V\xe8',
      '\x8d\xd0W<\x7f\xaf\xe2\x04F\xcc\xea\xac\x05N\xea\xa4x\x91M\xdb',
      '113\x85\xf2!\x8b\x08^\xb2Z\x821\x1e*\xdd\x0e\xeb\x8c3',
      'H]O\xc2`\xef\\\xb9\xc0p6\x88K\x00k\x11\x0ej\xdby',
      '\xd9;\xc4\x0b\x0e*GMp\xee\xf7}^\x91/f\x7fSd\x83'
    ],
    'tree': ''
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1515; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command filesdata: {
    'fields': set([
      'linknode',
      'parents',
      'revision'
    ]),
    'haveparents': False,
    'pathfilter': {
      'include': [
        'path:dir0'
      ]
    },
    'revisions': [
      {
        'nodes': [
          '\x93\xa8\xbd\x06~\xd2\x84\r\x9a\xa8\x10\xadY\x81h8::,:'
        ],
        'type': 'changesetexplicit'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=355; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  updating the branch cache
  new changesets 3390ef850073:93a8bd067ed2
  updating to branch default
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: 93a8bd067ed2
   dir0/c: remote created -> g
  getting dir0/c
   dir0/d: remote created -> g
  getting dir0/d
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (sent 5 HTTP requests and * bytes; received * bytes in responses) (glob)

  $ sqlite3 -line client-shallow-narrow-1/.hg/store/db.sqlite << EOF
  > SELECT id, path, revnum, node, p1rev, p2rev, linkrev, flags FROM filedata ORDER BY id ASC;
  > EOF
       id = 1
     path = dir0/c
   revnum = 0
     node = I\x1d\xa1\xbb\x89\xeax\xc0\xc0\xa2s[\x16\xce}\x93\x1d\xc8\xe2\r (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 2
  
       id = 2
     path = dir0/d
   revnum = 0
     node = S\x82\x06\xdc\x97\x1eR\x15@\xd6\x84:\xbf\xe6\xd1`2\xf6\xd4& (esc)
    p1rev = -1
    p2rev = -1
  linkrev = 5
    flags = 0

Cloning an old revision with depth=1 works

  $ hg --debug clone --depth 1 -r 97765fc3cd624fd1fa0176932c21ffd16adf432e http://localhost:$HGPORT client-shallow-2
  using http://localhost:$HGPORT/
  sending capabilities command
  sending 1 commands
  sending command lookup: {
    'key': '97765fc3cd624fd1fa0176932c21ffd16adf432e'
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=21; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  query 1; heads
  sending 2 commands
  sending command heads: {}
  sending command known: {
    'nodes': []
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=22; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  received frame(size=11; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command changesetdata: {
    'fields': set([
      'bookmarks',
      'parents',
      'phase',
      'revision'
    ]),
    'revisions': [
      {
        'heads': [
          '\x97v_\xc3\xcdbO\xd1\xfa\x01v\x93,!\xff\xd1j\xdfC.'
        ],
        'roots': [],
        'type': 'changesetdagrange'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=783; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  add changeset 3390ef850073
  add changeset b709380892b1
  add changeset 47fe012ab237
  add changeset 97765fc3cd62
  checking for updated bookmarks
  sending 1 commands
  sending command manifestdata: {
    'fields': set([
      'parents',
      'revision'
    ]),
    'haveparents': True,
    'nodes': [
      '\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A',
      '|2 \x1a\xa3\xa1R\xa9\xe6\xa9"+?\xa8\xd0\xe3\x0f\xc2V\xe8',
      '\x8d\xd0W<\x7f\xaf\xe2\x04F\xcc\xea\xac\x05N\xea\xa4x\x91M\xdb',
      '113\x85\xf2!\x8b\x08^\xb2Z\x821\x1e*\xdd\x0e\xeb\x8c3'
    ],
    'tree': ''
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=967; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command filesdata: {
    'fields': set([
      'linknode',
      'parents',
      'revision'
    ]),
    'haveparents': False,
    'revisions': [
      {
        'nodes': [
          '\x97v_\xc3\xcdbO\xd1\xfa\x01v\x93,!\xff\xd1j\xdfC.'
        ],
        'type': 'changesetexplicit'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1005; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  updating the branch cache
  new changesets 3390ef850073:97765fc3cd62
  updating to branch default
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: 97765fc3cd62
   a: remote created -> g
  getting a
   b: remote created -> g
  getting b
   dir0/c: remote created -> g
  getting dir0/c
   dir0/d: remote created -> g
  getting dir0/d
   dir1/e: remote created -> g
  getting dir1/e
   dir1/f: remote created -> g
  getting dir1/f
  6 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (sent 6 HTTP requests and * bytes; received * bytes in responses) (glob)

Incremental pull of shallow clone fetches new changesets

  $ hg --cwd client-shallow-2 --debug pull http://localhost:$HGPORT
  pulling from http://localhost:$HGPORT/
  using http://localhost:$HGPORT/
  sending capabilities command
  query 1; heads
  sending 2 commands
  sending command heads: {}
  sending command known: {
    'nodes': [
      '\x97v_\xc3\xcdbO\xd1\xfa\x01v\x93,!\xff\xd1j\xdfC.'
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=22; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  received frame(size=11; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=2; request=3; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=3; stream=2; streamflags=; type=command-response; flags=eos)
  searching for changes
  all local changesets known remotely
  sending 1 commands
  sending command changesetdata: {
    'fields': set([
      'bookmarks',
      'parents',
      'phase',
      'revision'
    ]),
    'revisions': [
      {
        'heads': [
          '\x93\xa8\xbd\x06~\xd2\x84\r\x9a\xa8\x10\xadY\x81h8::,:'
        ],
        'roots': [
          '\x97v_\xc3\xcdbO\xd1\xfa\x01v\x93,!\xff\xd1j\xdfC.'
        ],
        'type': 'changesetdagrange'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=400; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  add changeset dc666cf9ecf3
  add changeset 93a8bd067ed2
  checking for updated bookmarks
  sending 1 commands
  sending command manifestdata: {
    'fields': set([
      'parents',
      'revision'
    ]),
    'haveparents': True,
    'nodes': [
      'H]O\xc2`\xef\\\xb9\xc0p6\x88K\x00k\x11\x0ej\xdby',
      '\xd9;\xc4\x0b\x0e*GMp\xee\xf7}^\x91/f\x7fSd\x83'
    ],
    'tree': ''
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=561; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  sending 1 commands
  sending command filesdata: {
    'fields': set([
      'linknode',
      'parents',
      'revision'
    ]),
    'haveparents': False,
    'revisions': [
      {
        'nodes': [
          '\xdcfl\xf9\xec\xf3\xd9Nk\x83\x0f0\xe5\xf1\'.*\x91d\xd9',
          '\x93\xa8\xbd\x06~\xd2\x84\r\x9a\xa8\x10\xadY\x81h8::,:'
        ],
        'type': 'changesetexplicit'
      }
    ]
  }
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=1373; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  updating the branch cache
  new changesets dc666cf9ecf3:93a8bd067ed2
  (run 'hg update' to get a working copy)
  (sent 5 HTTP requests and * bytes; received * bytes in responses) (glob)

  $ hg --cwd client-shallow-2 up tip
  merging dir0/c
  merging dir1/e
  3 files updated, 2 files merged, 0 files removed, 0 files unresolved