Mercurial > hg
view tests/test-worker.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | 12491abf93bd |
children | 8f07f5a9c3de |
line wrap: on
line source
Test UI worker interaction $ cat > t.py <<EOF > from __future__ import absolute_import, print_function > import sys > import time > from mercurial import ( > error, > registrar, > ui as uimod, > worker, > ) > sys.unraisablehook = lambda x: None > def abort(ui, args): > if args[0] == 0: > # by first worker for test stability > raise error.Abort(b'known exception') > return runme(ui, []) > def exc(ui, args): > if args[0] == 0: > # by first worker for test stability > raise Exception('unknown exception') > return runme(ui, []) > def runme(ui, args): > for arg in args: > ui.status(b'run\n') > yield 1, arg > time.sleep(0.1) # easier to trigger killworkers code path > functable = { > b'abort': abort, > b'exc': exc, > b'runme': runme, > } > cmdtable = {} > command = registrar.command(cmdtable) > @command(b'test', [], b'hg test [COST] [FUNC]') > def t(ui, repo, cost=1.0, func=b'runme'): > cost = float(cost) > func = functable[func] > ui.status(b'start\n') > runs = worker.worker(ui, cost, func, (ui,), range(8)) > for n, i in runs: > pass > ui.status(b'done\n') > EOF $ abspath=`pwd`/t.py $ hg init Run tests with worker enable by forcing a heigh cost $ hg --config "extensions.t=$abspath" test 100000.0 start run run run run run run run run done Run tests without worker by forcing a low cost $ hg --config "extensions.t=$abspath" test 0.0000001 start run run run run run run run run done #if no-windows Known exception should be caught, but printed if --traceback is enabled $ hg --config "extensions.t=$abspath" --config 'worker.numcpus=8' \ > test 100000.0 abort 2>&1 start abort: known exception [255] $ hg --config "extensions.t=$abspath" --config 'worker.numcpus=8' \ > test 100000.0 abort --traceback 2>&1 | egrep '(SystemExit|Abort)' raise error.Abort(b'known exception') mercurial.error.Abort: known exception (py3 !) Abort: known exception (no-py3 !) SystemExit: 255 Traceback must be printed for unknown exceptions $ hg --config "extensions.t=$abspath" --config 'worker.numcpus=8' \ > test 100000.0 exc 2>&1 | grep '^Exception' Exception: unknown exception Workers should not do cleanups in all cases $ cat > $TESTTMP/detectcleanup.py <<EOF > from __future__ import absolute_import > import atexit > import os > import sys > import time > sys.unraisablehook = lambda x: None > oldfork = os.fork > count = 0 > parentpid = os.getpid() > def delayedfork(): > global count > count += 1 > pid = oldfork() > # make it easier to test SIGTERM hitting other workers when they have > # not set up error handling yet. > if count > 1 and pid == 0: > time.sleep(0.1) > return pid > os.fork = delayedfork > def cleanup(): > if os.getpid() != parentpid: > os.write(1, 'should never happen\n') > atexit.register(cleanup) > EOF $ hg --config "extensions.t=$abspath" --config worker.numcpus=8 --config \ > "extensions.d=$TESTTMP/detectcleanup.py" test 100000 abort start abort: known exception [255] Do not crash on partially read result $ cat > $TESTTMP/detecttruncated.py <<EOF > from __future__ import absolute_import > import os > import sys > import time > sys.unraisablehook = lambda x: None > oldwrite = os.write > def splitwrite(fd, string): > ret = oldwrite(fd, string[:9]) > if ret == 9: > time.sleep(0.1) > ret += oldwrite(fd, string[9:]) > return ret > os.write = splitwrite > EOF $ hg --config "extensions.t=$abspath" --config worker.numcpus=8 --config \ > "extensions.d=$TESTTMP/detecttruncated.py" test 100000.0 start run run run run run run run run done #endif