patch: include flag-only file changes in "special" when filtering (
issue5864)
This patch fix the
issue5864 (or maybe
issue5865 too) which occurs during
split (or I should say at the time of filtering the hunks in interactive
mode) where user hits a not ending loop of "no changes to record".
And it's not only the case for split it will happen in every interactive
case for e.g. `hg commit -i` or `hg uncommit -i`
After looking into code I found that when filtering we have some
notation called "special" for the file headers which doesn't contain
any hunk and just contain the header (for e.g. newly added empty file
or deleted file) where the user cannot change the content of operation.
And I think we can put this "flag-only" file change in that same bucket
of "special". But I doubt a bit about the case when a file have flag change
and atleast one hunk then user won't be able to separate the flag change
from hunks.
Changed test file reflect the fixed behaviour.
Differential Revision: https://phab.mercurial-scm.org/D6058
#require chg
$ mkdir log
$ cp $HGRCPATH $HGRCPATH.unconfigured
$ cat <<'EOF' >> $HGRCPATH
> [cmdserver]
> log = $TESTTMP/log/server.log
> max-log-files = 1
> max-log-size = 10 kB
> EOF
$ cp $HGRCPATH $HGRCPATH.orig
$ filterlog () {
> sed -e 's!^[0-9/]* [0-9:]* ([0-9]*)>!YYYY/MM/DD HH:MM:SS (PID)>!' \
> -e 's!\(setprocname\|received fds\|setenv\): .*!\1: ...!' \
> -e 's!\(confighash\|mtimehash\) = [0-9a-f]*!\1 = ...!g' \
> -e 's!\(in \)[0-9.]*s\b!\1 ...s!g' \
> -e 's!\(pid\)=[0-9]*!\1=...!g' \
> -e 's!\(/server-\)[0-9a-f]*!\1...!g'
> }
init repo
$ chg init foo
$ cd foo
ill-formed config
$ chg status
$ echo '=brokenconfig' >> $HGRCPATH
$ chg status
hg: parse error at * (glob)
[255]
$ cp $HGRCPATH.orig $HGRCPATH
long socket path
$ sockpath=$TESTTMP/this/path/should/be/longer/than/one-hundred-and-seven/characters/where/107/is/the/typical/size/limit/of/unix-domain-socket
$ mkdir -p $sockpath
$ bakchgsockname=$CHGSOCKNAME
$ CHGSOCKNAME=$sockpath/server
$ export CHGSOCKNAME
$ chg root
$TESTTMP/foo
$ rm -rf $sockpath
$ CHGSOCKNAME=$bakchgsockname
$ export CHGSOCKNAME
$ cd ..
editor
------
$ cat >> pushbuffer.py <<EOF
> def reposetup(ui, repo):
> repo.ui.pushbuffer(subproc=True)
> EOF
$ chg init editor
$ cd editor
by default, system() should be redirected to the client:
$ touch foo
$ CHGDEBUG= HGEDITOR=cat chg ci -Am channeled --edit 2>&1 \
> | egrep "HG:|run 'cat"
chg: debug: * run 'cat "*"' at '$TESTTMP/editor' (glob)
HG: Enter commit message. Lines beginning with 'HG:' are removed.
HG: Leave message empty to abort commit.
HG: --
HG: user: test
HG: branch 'default'
HG: added foo
but no redirection should be made if output is captured:
$ touch bar
$ CHGDEBUG= HGEDITOR=cat chg ci -Am bufferred --edit \
> --config extensions.pushbuffer="$TESTTMP/pushbuffer.py" 2>&1 \
> | egrep "HG:|run 'cat"
[1]
check that commit commands succeeded:
$ hg log -T '{rev}:{desc}\n'
1:bufferred
0:channeled
$ cd ..
pager
-----
$ cat >> fakepager.py <<EOF
> import sys
> for line in sys.stdin:
> sys.stdout.write('paged! %r\n' % line)
> EOF
enable pager extension globally, but spawns the master server with no tty:
$ chg init pager
$ cd pager
$ cat >> $HGRCPATH <<EOF
> [extensions]
> pager =
> [pager]
> pager = "$PYTHON" $TESTTMP/fakepager.py
> EOF
$ chg version > /dev/null
$ touch foo
$ chg ci -qAm foo
pager should be enabled if the attached client has a tty:
$ chg log -l1 -q --config ui.formatted=True
paged! '0:1f7b0de80e11\n'
$ chg log -l1 -q --config ui.formatted=False
0:1f7b0de80e11
chg waits for pager if runcommand raises
$ cat > $TESTTMP/crash.py <<EOF
> from mercurial import registrar
> cmdtable = {}
> command = registrar.command(cmdtable)
> @command(b'crash')
> def pagercrash(ui, repo, *pats, **opts):
> ui.write('going to crash\n')
> raise Exception('.')
> EOF
$ cat > $TESTTMP/fakepager.py <<EOF
> from __future__ import absolute_import
> import sys
> import time
> for line in iter(sys.stdin.readline, ''):
> if 'crash' in line: # only interested in lines containing 'crash'
> # if chg exits when pager is sleeping (incorrectly), the output
> # will be captured by the next test case
> time.sleep(1)
> sys.stdout.write('crash-pager: %s' % line)
> EOF
$ cat >> .hg/hgrc <<EOF
> [extensions]
> crash = $TESTTMP/crash.py
> EOF
$ chg crash --pager=on --config ui.formatted=True 2>/dev/null
crash-pager: going to crash
[255]
$ cd ..
server lifecycle
----------------
chg server should be restarted on code change, and old server will shut down
automatically. In this test, we use the following time parameters:
- "sleep 1" to make mtime different
- "sleep 2" to notice mtime change (polling interval is 1 sec)
set up repository with an extension:
$ chg init extreload
$ cd extreload
$ touch dummyext.py
$ cat <<EOF >> .hg/hgrc
> [extensions]
> dummyext = dummyext.py
> EOF
isolate socket directory for stable result:
$ OLDCHGSOCKNAME=$CHGSOCKNAME
$ mkdir chgsock
$ CHGSOCKNAME=`pwd`/chgsock/server
warm up server:
$ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)
new server should be started if extension modified:
$ sleep 1
$ touch dummyext.py
$ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
chg: debug: * instruction: unlink $TESTTMP/extreload/chgsock/server-* (glob)
chg: debug: * instruction: reconnect (glob)
chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)
old server will shut down, while new server should still be reachable:
$ sleep 2
$ CHGDEBUG= chg log 2>&1 | (egrep 'instruction|start' || true)
socket file should never be unlinked by old server:
(simulates unowned socket by updating mtime, which makes sure server exits
at polling cycle)
$ ls chgsock/server-*
chgsock/server-* (glob)
$ touch chgsock/server-*
$ sleep 2
$ ls chgsock/server-*
chgsock/server-* (glob)
since no server is reachable from socket file, new server should be started:
(this test makes sure that old server shut down automatically)
$ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)
shut down servers and restore environment:
$ rm -R chgsock
$ sleep 2
$ CHGSOCKNAME=$OLDCHGSOCKNAME
$ cd ..
check that server events are recorded:
$ ls log
server.log
server.log.1
print only the last 10 lines, since we aren't sure how many records are
preserved:
$ cat log/server.log.1 log/server.log | tail -10 | filterlog
YYYY/MM/DD HH:MM:SS (PID)> forked worker process (pid=...)
YYYY/MM/DD HH:MM:SS (PID)> setprocname: ...
YYYY/MM/DD HH:MM:SS (PID)> received fds: ...
YYYY/MM/DD HH:MM:SS (PID)> chdir to '$TESTTMP/extreload'
YYYY/MM/DD HH:MM:SS (PID)> setumask 18
YYYY/MM/DD HH:MM:SS (PID)> setenv: ...
YYYY/MM/DD HH:MM:SS (PID)> confighash = ... mtimehash = ...
YYYY/MM/DD HH:MM:SS (PID)> validate: []
YYYY/MM/DD HH:MM:SS (PID)> worker process exited (pid=...)
YYYY/MM/DD HH:MM:SS (PID)> $TESTTMP/extreload/chgsock/server-... is not owned, exiting.
repository cache
----------------
$ rm log/server.log*
$ cp $HGRCPATH.unconfigured $HGRCPATH
$ cat <<'EOF' >> $HGRCPATH
> [cmdserver]
> log = $TESTTMP/log/server.log
> max-repo-cache = 1
> track-log = command, repocache
> EOF
isolate socket directory for stable result:
$ OLDCHGSOCKNAME=$CHGSOCKNAME
$ mkdir chgsock
$ CHGSOCKNAME=`pwd`/chgsock/server
create empty repo and cache it:
$ hg init cached
$ hg id -R cached
000000000000 tip
$ sleep 1
modify repo (and cache will be invalidated):
$ touch cached/a
$ hg ci -R cached -Am 'add a'
adding a
$ sleep 1
read cached repo:
$ hg log -R cached
changeset: 0:ac82d8b1f7c4
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add a
$ sleep 1
discard cached from LRU cache:
$ hg clone cached cached2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id -R cached2
ac82d8b1f7c4 tip
$ sleep 1
read uncached repo:
$ hg log -R cached
changeset: 0:ac82d8b1f7c4
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add a
$ sleep 1
shut down servers and restore environment:
$ rm -R chgsock
$ sleep 2
$ CHGSOCKNAME=$OLDCHGSOCKNAME
check server log:
$ cat log/server.log | filterlog
YYYY/MM/DD HH:MM:SS (PID)> init cached
YYYY/MM/DD HH:MM:SS (PID)> id -R cached
YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in ...s)
YYYY/MM/DD HH:MM:SS (PID)> repo from cache: $TESTTMP/cached
YYYY/MM/DD HH:MM:SS (PID)> ci -R cached -Am 'add a'
YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in ...s)
YYYY/MM/DD HH:MM:SS (PID)> repo from cache: $TESTTMP/cached
YYYY/MM/DD HH:MM:SS (PID)> log -R cached
YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in ...s)
YYYY/MM/DD HH:MM:SS (PID)> clone cached cached2
YYYY/MM/DD HH:MM:SS (PID)> id -R cached2
YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached2 (in ...s)
YYYY/MM/DD HH:MM:SS (PID)> log -R cached
YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in ...s)