view tests/test-fileset.t @ 44950:f9734b2d59cc

py3: make stdout line-buffered if connected to a TTY

Status messages that are to be shown on the terminal should be written to the
file descriptor before anything further is done, to keep the user updated.

One common way to achieve this is to make stdout line-buffered if it is
connected to a TTY. This is done on Python 2 (except on Windows, where libc,
which the CPython 2 streams depend on, does not properly support this).

Python 3 rolls it own I/O streams. On Python 3, buffered binary streams can't be
set line-buffered. The previous code (added in 227ba1afcb65) incorrectly
assumed that on Python 3, pycompat.stdout (sys.stdout.buffer) is already
line-buffered. However the interpreter initializes it with a block-buffered
stream or an unbuffered stream (when the -u option or the PYTHONUNBUFFERED
environment variable is set), never with a line-buffered stream.

One example where the current behavior is unacceptable is when running
`hg pull https://www.mercurial-scm.org/repo/hg` on Python 3, where the line
"pulling from https://www.mercurial-scm.org/repo/hg" does not appear on the
terminal before the hg process blocks while waiting for the server.

Various approaches to fix this problem are possible, including:

1. Weaken the contract of procutil.stdout to not give any guarantees about
   buffering behavior. In this case, users of procutil.stdout need to be
   changed to do enough flushes. In particular,
  1. either ui must insert enough flushes for ui.write() and friends, or
  2. ui.write() and friends get split into flushing and fully buffered
     methods, or
  3. users of ui.write() and friends must flush explicitly.
2. Make stdout unbuffered.
3. Make stdout line-buffered. Since Python 3 does not natively support that for
   binary streams, we must implement it ourselves.

(2.) is problematic because using unbuffered I/O changes the performance
characteristics significantly compared to line-buffered (which is used on
Python 2) and this would be a regression.

(1.2.) and (1.3) are a substantial amount of work. It’s unclear whether the
added complexity would be justified, given that raw performance doesn’t matter
that much when writing to a terminal much faster than the user could read it.

(1.1.) pushes complexity into the ui class instead of separating the concern of
how stdout is buffered. Other users of procutil.stdout would still need to take
care of the flushes.

This patch implements (3.). The general performance considerations are very
similar to (1.1.). The extra method invocation and method forwarding add a
little more overhead if the class is used. In exchange, it doesn’t add overhead
if not used.


For the benchmarks, I compared the previous implementation (incorrect on Python
3), (1.1.), (3.) and (2.). The command was chosen so that the streams were
configured as if they were writing to a TTY, but actually write to a pager,
which is also the default:
HGRCPATH=/dev/null python3 ./hg --cwd ~/vcs/mozilla-central --time --pager yes --config pager.pager='cat > /dev/null' status --all

previous:
time: real 7.880 secs (user 7.290+0.050 sys 0.580+0.170)
time: real 7.830 secs (user 7.220+0.070 sys 0.590+0.140)
time: real 7.800 secs (user 7.210+0.050 sys 0.570+0.170)

(1.1.) using Yuya Nishihara’s patch:
time: real 9.860 secs (user 8.670+0.350 sys 1.160+0.830)
time: real 9.540 secs (user 8.430+0.370 sys 1.100+0.770)
time: real 9.830 secs (user 8.630+0.370 sys 1.180+0.840)

(3.) using this patch:
time: real 9.580 secs (user 8.480+0.350 sys 1.090+0.770)
time: real 9.670 secs (user 8.480+0.330 sys 1.170+0.860)
time: real 9.640 secs (user 8.500+0.350 sys 1.130+0.810)

(2.) using a previous patch by me:
time: real 10.480 secs (user 8.850+0.720 sys 1.590+1.500)
time: real 10.490 secs (user 8.750+0.750 sys 1.710+1.470)
time: real 10.240 secs (user 8.600+0.700 sys 1.590+1.510)


As expected, there’s no difference on Python 2, as exactly the same code paths
are used:

previous:
time: real 6.950 secs (user 5.870+0.330 sys 1.070+0.770)
time: real 7.040 secs (user 6.040+0.360 sys 0.980+0.750)
time: real 7.070 secs (user 5.950+0.360 sys 1.100+0.760)

this patch:
time: real 7.010 secs (user 5.900+0.390 sys 1.070+0.730)
time: real 7.000 secs (user 5.850+0.350 sys 1.120+0.760)
time: real 7.000 secs (user 5.790+0.380 sys 1.170+0.710)

  $ fileset() {
  >   hg debugfileset --all-files "$@"
  > }

  $ hg init repo
  $ cd repo
  $ echo a > a1
  $ echo a > a2
  $ echo b > b1
  $ echo b > b2
  $ hg ci -Am addfiles
  adding a1
  adding a2
  adding b1
  adding b2

Test operators and basic patterns

  $ fileset -v a1
  (symbol 'a1')
  * matcher:
  <patternmatcher patterns='a1$'>
  a1
  $ fileset -v 'a*'
  (symbol 'a*')
  * matcher:
  <patternmatcher patterns='a[^/]*$'>
  a1
  a2
  $ fileset -v '"re:a\d"'
  (string 're:a\\d')
  * matcher:
  <patternmatcher patterns='a\\d'>
  a1
  a2
  $ fileset -v '!re:"a\d"'
  (not
    (kindpat
      (symbol 're')
      (string 'a\\d')))
  * matcher:
  <predicatenmatcher
    pred=<not
      <patternmatcher patterns='a\\d'>>>
  b1
  b2
  $ fileset -v 'path:a1 or glob:b?'
  (or
    (kindpat
      (symbol 'path')
      (symbol 'a1'))
    (kindpat
      (symbol 'glob')
      (symbol 'b?')))
  * matcher:
  <patternmatcher patterns='a1(?:/|$)|b.$'>
  a1
  b1
  b2
  $ fileset -v --no-show-matcher 'a1 or a2'
  (or
    (symbol 'a1')
    (symbol 'a2'))
  a1
  a2
  $ fileset 'a1 | a2'
  a1
  a2
  $ fileset 'a* and "*1"'
  a1
  $ fileset 'a* & "*1"'
  a1
  $ fileset 'not (r"a*")'
  b1
  b2
  $ fileset '! ("a*")'
  b1
  b2
  $ fileset 'a* - a1'
  a2
  $ fileset 'a_b'
  $ fileset '"\xy"'
  hg: parse error: invalid \x escape* (glob)
  [255]

Test invalid syntax

  $ fileset -v '"added"()'
  (func
    (string 'added')
    None)
  hg: parse error: not a symbol
  [255]
  $ fileset -v '()()'
  (func
    (group
      None)
    None)
  hg: parse error: not a symbol
  [255]
  $ fileset -v -- '-x'
  (negate
    (symbol 'x'))
  hg: parse error: can't use negate operator in this context
  [255]
  $ fileset -v -- '-()'
  (negate
    (group
      None))
  hg: parse error: can't use negate operator in this context
  [255]
  $ fileset -p parsed 'a, b, c'
  * parsed:
  (list
    (symbol 'a')
    (symbol 'b')
    (symbol 'c'))
  hg: parse error: can't use a list in this context
  (see 'hg help "filesets.x or y"')
  [255]

  $ fileset '"path":.'
  hg: parse error: not a symbol
  [255]
  $ fileset 'path:foo bar'
  hg: parse error at 9: invalid token
  [255]
  $ fileset 'foo:bar:baz'
  hg: parse error: not a symbol
  [255]
  $ fileset 'foo:bar()'
  hg: parse error: pattern must be a string
  [255]
  $ fileset 'foo:bar'
  hg: parse error: invalid pattern kind: foo
  [255]

Show parsed tree at stages:

  $ fileset -p unknown a
  abort: invalid stage name: unknown
  [255]

  $ fileset -p parsed 'path:a1 or glob:b?'
  * parsed:
  (or
    (kindpat
      (symbol 'path')
      (symbol 'a1'))
    (kindpat
      (symbol 'glob')
      (symbol 'b?')))
  a1
  b1
  b2

  $ fileset -p all -s 'a1 or a2 or (grep("b") & clean())'
  * parsed:
  (or
    (symbol 'a1')
    (symbol 'a2')
    (group
      (and
        (func
          (symbol 'grep')
          (string 'b'))
        (func
          (symbol 'clean')
          None))))
  * analyzed:
  (or
    (symbol 'a1')
    (symbol 'a2')
    (and
      (func
        (symbol 'grep')
        (string 'b'))
      (withstatus
        (func
          (symbol 'clean')
          None)
        (string 'clean'))))
  * optimized:
  (or
    (patterns
      (symbol 'a1')
      (symbol 'a2'))
    (and
      (withstatus
        (func
          (symbol 'clean')
          None)
        (string 'clean'))
      (func
        (symbol 'grep')
        (string 'b'))))
  * matcher:
  <unionmatcher matchers=[
    <patternmatcher patterns='a1$|a2$'>,
    <intersectionmatcher
      m1=<predicatenmatcher pred=clean>,
      m2=<predicatenmatcher pred=grep('b')>>]>
  a1
  a2
  b1
  b2

Union of basic patterns:

  $ fileset -p optimized -s -r. 'a1 or a2 or path:b1'
  * optimized:
  (patterns
    (symbol 'a1')
    (symbol 'a2')
    (kindpat
      (symbol 'path')
      (symbol 'b1')))
  * matcher:
  <patternmatcher patterns='a1$|a2$|b1(?:/|$)'>
  a1
  a2
  b1

OR expression should be reordered by weight:

  $ fileset -p optimized -s -r. 'grep("a") or a1 or grep("b") or b2'
  * optimized:
  (or
    (patterns
      (symbol 'a1')
      (symbol 'b2'))
    (func
      (symbol 'grep')
      (string 'a'))
    (func
      (symbol 'grep')
      (string 'b')))
  * matcher:
  <unionmatcher matchers=[
    <patternmatcher patterns='a1$|b2$'>,
    <predicatenmatcher pred=grep('a')>,
    <predicatenmatcher pred=grep('b')>]>
  a1
  a2
  b1
  b2

Use differencematcher for 'x and not y':

  $ fileset -p optimized -s 'a* and not a1'
  * optimized:
  (minus
    (symbol 'a*')
    (symbol 'a1'))
  * matcher:
  <differencematcher
    m1=<patternmatcher patterns='a[^/]*$'>,
    m2=<patternmatcher patterns='a1$'>>
  a2

  $ fileset -p optimized -s '!binary() and a*'
  * optimized:
  (minus
    (symbol 'a*')
    (func
      (symbol 'binary')
      None))
  * matcher:
  <differencematcher
    m1=<patternmatcher patterns='a[^/]*$'>,
    m2=<predicatenmatcher pred=binary>>
  a1
  a2

'x - y' is rewritten to 'x and not y' first so the operands can be reordered:

  $ fileset -p analyzed -p optimized -s 'a* - a1'
  * analyzed:
  (and
    (symbol 'a*')
    (not
      (symbol 'a1')))
  * optimized:
  (minus
    (symbol 'a*')
    (symbol 'a1'))
  * matcher:
  <differencematcher
    m1=<patternmatcher patterns='a[^/]*$'>,
    m2=<patternmatcher patterns='a1$'>>
  a2

  $ fileset -p analyzed -p optimized -s 'binary() - a*'
  * analyzed:
  (and
    (func
      (symbol 'binary')
      None)
    (not
      (symbol 'a*')))
  * optimized:
  (and
    (not
      (symbol 'a*'))
    (func
      (symbol 'binary')
      None))
  * matcher:
  <intersectionmatcher
    m1=<predicatenmatcher
      pred=<not
        <patternmatcher patterns='a[^/]*$'>>>,
    m2=<predicatenmatcher pred=binary>>

Test files status

  $ rm a1
  $ hg rm a2
  $ echo b >> b2
  $ hg cp b1 c1
  $ echo c > c2
  $ echo c > c3
  $ cat > .hgignore <<EOF
  > \.hgignore
  > 2$
  > EOF
  $ fileset 'modified()'
  b2
  $ fileset 'added()'
  c1
  $ fileset 'removed()'
  a2
  $ fileset 'deleted()'
  a1
  $ fileset 'missing()'
  a1
  $ fileset 'unknown()'
  c3
  $ fileset 'ignored()'
  .hgignore
  c2
  $ fileset 'hgignore()'
  .hgignore
  a2
  b2
  c2
  $ fileset 'clean()'
  b1
  $ fileset 'copied()'
  c1

Test files status in different revisions

  $ hg status -m
  M b2
  $ fileset -r0 'revs("wdir()", modified())' --traceback
  b2
  $ hg status -a
  A c1
  $ fileset -r0 'revs("wdir()", added())'
  c1
  $ hg status --change 0 -a
  A a1
  A a2
  A b1
  A b2
  $ hg status -mru
  M b2
  R a2
  ? c3
  $ fileset -r0 'added() and revs("wdir()", modified() or removed() or unknown())'
  a2
  b2
  $ fileset -r0 'added() or revs("wdir()", added())'
  a1
  a2
  b1
  b2
  c1

Test insertion of status hints

  $ fileset -p optimized 'added()'
  * optimized:
  (withstatus
    (func
      (symbol 'added')
      None)
    (string 'added'))
  c1

  $ fileset -p optimized 'a* & removed()'
  * optimized:
  (and
    (symbol 'a*')
    (withstatus
      (func
        (symbol 'removed')
        None)
      (string 'removed')))
  a2

  $ fileset -p optimized 'a* - removed()'
  * optimized:
  (minus
    (symbol 'a*')
    (withstatus
      (func
        (symbol 'removed')
        None)
      (string 'removed')))
  a1

  $ fileset -p analyzed -p optimized '(added() + removed()) - a*'
  * analyzed:
  (and
    (withstatus
      (or
        (func
          (symbol 'added')
          None)
        (func
          (symbol 'removed')
          None))
      (string 'added removed'))
    (not
      (symbol 'a*')))
  * optimized:
  (and
    (not
      (symbol 'a*'))
    (withstatus
      (or
        (func
          (symbol 'added')
          None)
        (func
          (symbol 'removed')
          None))
      (string 'added removed')))
  c1

  $ fileset -p optimized 'a* + b* + added() + unknown()'
  * optimized:
  (withstatus
    (or
      (patterns
        (symbol 'a*')
        (symbol 'b*'))
      (func
        (symbol 'added')
        None)
      (func
        (symbol 'unknown')
        None))
    (string 'added unknown'))
  a1
  a2
  b1
  b2
  c1
  c3

  $ fileset -p analyzed -p optimized 'removed() & missing() & a*'
  * analyzed:
  (and
    (withstatus
      (and
        (func
          (symbol 'removed')
          None)
        (func
          (symbol 'missing')
          None))
      (string 'removed missing'))
    (symbol 'a*'))
  * optimized:
  (and
    (symbol 'a*')
    (withstatus
      (and
        (func
          (symbol 'removed')
          None)
        (func
          (symbol 'missing')
          None))
      (string 'removed missing')))

  $ fileset -p optimized 'clean() & revs(0, added())'
  * optimized:
  (and
    (withstatus
      (func
        (symbol 'clean')
        None)
      (string 'clean'))
    (func
      (symbol 'revs')
      (list
        (symbol '0')
        (withstatus
          (func
            (symbol 'added')
            None)
          (string 'added')))))
  b1

  $ fileset -p optimized 'clean() & status(null, 0, b* & added())'
  * optimized:
  (and
    (withstatus
      (func
        (symbol 'clean')
        None)
      (string 'clean'))
    (func
      (symbol 'status')
      (list
        (symbol 'null')
        (symbol '0')
        (and
          (symbol 'b*')
          (withstatus
            (func
              (symbol 'added')
              None)
            (string 'added'))))))
  b1

Test files properties

  >>> open('bin', 'wb').write(b'\0a') and None
  $ fileset 'binary()'
  bin
  $ fileset 'binary() and unknown()'
  bin
  $ echo '^bin$' >> .hgignore
  $ fileset 'binary() and ignored()'
  bin
  $ hg add bin
  $ fileset 'binary()'
  bin

  $ fileset -p optimized -s 'binary() and b*'
  * optimized:
  (and
    (symbol 'b*')
    (func
      (symbol 'binary')
      None))
  * matcher:
  <intersectionmatcher
    m1=<patternmatcher patterns='b[^/]*$'>,
    m2=<predicatenmatcher pred=binary>>
  bin

  $ fileset 'grep("b{1}")'
  .hgignore
  b1
  b2
  c1
  $ fileset 'grep("missingparens(")'
  hg: parse error: invalid match pattern: (unbalanced parenthesis|missing \)).* (re)
  [255]

#if execbit
  $ chmod +x b2
  $ fileset 'exec()'
  b2
#endif

#if symlink
  $ ln -s b2 b2link
  $ fileset 'symlink() and unknown()'
  b2link
  $ hg add b2link
#endif

#if no-windows
  $ echo foo > con.xml
  $ fileset 'not portable()'
  con.xml
  $ hg --config ui.portablefilenames=ignore add con.xml
#endif

  >>> open('1k', 'wb').write(b' '*1024) and None
  >>> open('2k', 'wb').write(b' '*2048) and None
  $ hg add 1k 2k
  $ fileset 'size("bar")'
  hg: parse error: couldn't parse size: bar
  [255]
  $ fileset '(1k, 2k)'
  hg: parse error: can't use a list in this context
  (see 'hg help "filesets.x or y"')
  [255]
  $ fileset 'size(1k)'
  1k
  $ fileset '(1k or 2k) and size("< 2k")'
  1k
  $ fileset '(1k or 2k) and size("<=2k")'
  1k
  2k
  $ fileset '(1k or 2k) and size("> 1k")'
  2k
  $ fileset '(1k or 2k) and size(">=1K")'
  1k
  2k
  $ fileset '(1k or 2k) and size(".5KB - 1.5kB")'
  1k
  $ fileset 'size("1M")'
  $ fileset 'size("1 GB")'

Test merge states

  $ hg ci -m manychanges
  $ hg file -r . 'set:copied() & modified()'
  [1]
  $ hg up -C 0
  * files updated, 0 files merged, * files removed, 0 files unresolved (glob)
  $ echo c >> b2
  $ hg ci -m diverging b2
  created new head
  $ fileset 'resolved()'
  $ fileset 'unresolved()'
  $ hg merge
  merging b2
  warning: conflicts while merging b2! (edit, then use 'hg resolve --mark')
  * files updated, 0 files merged, 1 files removed, 1 files unresolved (glob)
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ fileset 'resolved()'
  $ fileset 'unresolved()'
  b2
  $ echo e > b2
  $ hg resolve -m b2
  (no more unresolved files)
  $ fileset 'resolved()'
  b2
  $ fileset 'unresolved()'
  $ hg ci -m merge

Test subrepo predicate

  $ hg init sub
  $ echo a > sub/suba
  $ hg -R sub add sub/suba
  $ hg -R sub ci -m sub
  $ echo 'sub = sub' > .hgsub
  $ hg init sub2
  $ echo b > sub2/b
  $ hg -R sub2 ci -Am sub2
  adding b
  $ echo 'sub2 = sub2' >> .hgsub
  $ fileset 'subrepo()'
  $ hg add .hgsub
  $ fileset 'subrepo()'
  sub
  sub2
  $ fileset 'subrepo("sub")'
  sub
  $ fileset 'subrepo("glob:*")'
  sub
  sub2
  $ hg ci -m subrepo

Test that .hgsubstate is updated as appropriate during a conversion.  The
saverev property is enough to alter the hashes of the subrepo.

  $ hg init ../converted
  $ hg --config extensions.convert= convert --config convert.hg.saverev=True  \
  >      sub ../converted/sub
  initializing destination ../converted/sub repository
  scanning source...
  sorting...
  converting...
  0 sub
  $ hg clone -U sub2 ../converted/sub2
  $ hg --config extensions.convert= convert --config convert.hg.saverev=True  \
  >      . ../converted
  scanning source...
  sorting...
  converting...
  4 addfiles
  3 manychanges
  2 diverging
  1 merge
  0 subrepo
  no ".hgsubstate" updates will be made for "sub2"
  $ hg up -q -R ../converted -r tip
  $ hg --cwd ../converted cat sub/suba sub2/b -r tip
  a
  b
  $ oldnode=`hg log -r tip -T "{node}\n"`
  $ newnode=`hg log -R ../converted -r tip -T "{node}\n"`
  $ [ "$oldnode" != "$newnode" ] || echo "nothing changed"

Test with a revision

  $ hg log -G --template '{rev} {desc}\n'
  @  4 subrepo
  |
  o    3 merge
  |\
  | o  2 diverging
  | |
  o |  1 manychanges
  |/
  o  0 addfiles
  
  $ echo unknown > unknown
  $ fileset -r1 'modified()'
  b2
  $ fileset -r1 'added() and c1'
  c1
  $ fileset -r1 'removed()'
  a2
  $ fileset -r1 'deleted()'
  $ fileset -r1 'unknown()'
  $ fileset -r1 'ignored()'
  $ fileset -r1 'hgignore()'
  .hgignore
  a2
  b2
  bin
  c2
  sub2
  $ fileset -r1 'binary()'
  bin
  $ fileset -r1 'size(1k)'
  1k
  $ fileset -r3 'resolved()'
  $ fileset -r3 'unresolved()'

#if execbit
  $ fileset -r1 'exec()'
  b2
#endif

#if symlink
  $ fileset -r1 'symlink()'
  b2link
#endif

#if no-windows
  $ fileset -r1 'not portable()'
  con.xml
  $ hg forget 'con.xml'
#endif

  $ fileset -r4 'subrepo("re:su.*")'
  sub
  sub2
  $ fileset -r4 'subrepo(re:su.*)'
  sub
  sub2
  $ fileset -r4 'subrepo("sub")'
  sub
  $ fileset -r4 'b2 or c1'
  b2
  c1

  >>> open('dos', 'wb').write(b"dos\r\n") and None
  >>> open('mixed', 'wb').write(b"dos\r\nunix\n") and None
  >>> open('mac', 'wb').write(b"mac\r") and None
  $ hg add dos mixed mac

(remove a1, to examine safety of 'eol' on removed files)
  $ rm a1

  $ fileset 'eol(dos)'
  dos
  mixed
  $ fileset 'eol(unix)'
  .hgignore
  .hgsub
  .hgsubstate
  b1
  b2
  b2.orig
  c1
  c2
  c3
  con.xml (no-windows !)
  mixed
  unknown
  $ fileset 'eol(mac)'
  mac

Test safety of 'encoding' on removed files

  $ fileset 'encoding("ascii")'
  .hgignore
  .hgsub
  .hgsubstate
  1k
  2k
  b1
  b2
  b2.orig
  b2link (symlink !)
  bin
  c1
  c2
  c3
  con.xml (no-windows !)
  dos
  mac
  mixed
  unknown

Test 'revs(...)'
================

small reminder of the repository state

  $ hg log -G
  @  changeset:   4:* (glob)
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     subrepo
  |
  o    changeset:   3:* (glob)
  |\   parent:      2:55b05bdebf36
  | |  parent:      1:* (glob)
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     merge
  | |
  | o  changeset:   2:55b05bdebf36
  | |  parent:      0:8a9576c51c1f
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     diverging
  | |
  o |  changeset:   1:* (glob)
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     manychanges
  |
  o  changeset:   0:8a9576c51c1f
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     addfiles
  
  $ hg status --change 0
  A a1
  A a2
  A b1
  A b2
  $ hg status --change 1
  M b2
  A 1k
  A 2k
  A b2link (symlink !)
  A bin
  A c1
  A con.xml (no-windows !)
  R a2
  $ hg status --change 2
  M b2
  $ hg status --change 3
  M b2
  A 1k
  A 2k
  A b2link (symlink !)
  A bin
  A c1
  A con.xml (no-windows !)
  R a2
  $ hg status --change 4
  A .hgsub
  A .hgsubstate
  $ hg status
  A dos
  A mac
  A mixed
  R con.xml (no-windows !)
  ! a1
  ? b2.orig
  ? c3
  ? unknown

Test files at -r0 should be filtered by files at wdir
-----------------------------------------------------

  $ fileset -r0 'tracked() and revs("wdir()", tracked())'
  a1
  b1
  b2

Test that "revs()" work at all
------------------------------

  $ fileset "revs('2', modified())"
  b2

Test that "revs()" work for file missing in the working copy/current context
----------------------------------------------------------------------------

(a2 not in working copy)

  $ fileset "revs('0', added())"
  a1
  a2
  b1
  b2

(none of the file exist in "0")

  $ fileset -r 0 "revs('4', added())"
  .hgsub
  .hgsubstate

Call with empty revset
--------------------------

  $ fileset "revs('2-2', modified())"

Call with revset matching multiple revs
---------------------------------------

  $ fileset "revs('0+4', added())"
  .hgsub
  .hgsubstate
  a1
  a2
  b1
  b2

overlapping set

  $ fileset "revs('1+2', modified())"
  b2

test 'status(...)'
=================

Simple case
-----------

  $ fileset "status(3, 4, added())"
  .hgsub
  .hgsubstate

use rev to restrict matched file
-----------------------------------------

  $ hg status --removed --rev 0 --rev 1
  R a2
  $ fileset "status(0, 1, removed())"
  a2
  $ fileset "tracked() and status(0, 1, removed())"
  $ fileset -r 4 "status(0, 1, removed())"
  a2
  $ fileset -r 4 "tracked() and status(0, 1, removed())"
  $ fileset "revs('4', tracked() and status(0, 1, removed()))"
  $ fileset "revs('0', tracked() and status(0, 1, removed()))"
  a2

check wdir()
------------

  $ hg status --removed  --rev 4
  R con.xml (no-windows !)
  $ fileset "status(4, 'wdir()', removed())"
  con.xml (no-windows !)

  $ hg status --removed --rev 2
  R a2
  $ fileset "status('2', 'wdir()', removed())"
  a2

test backward status
--------------------

  $ hg status --removed --rev 0 --rev 4
  R a2
  $ hg status --added --rev 4 --rev 0
  A a2
  $ fileset "status(4, 0, added())"
  a2

test cross branch status
------------------------

  $ hg status --added --rev 1 --rev 2
  A a2
  $ fileset "status(1, 2, added())"
  a2

test with multi revs revset
---------------------------
  $ hg status --added --rev 0:1 --rev 3:4
  A .hgsub
  A .hgsubstate
  A 1k
  A 2k
  A b2link (symlink !)
  A bin
  A c1
  A con.xml (no-windows !)
  $ fileset "status('0:1', '3:4', added())"
  .hgsub
  .hgsubstate
  1k
  2k
  b2link (symlink !)
  bin
  c1
  con.xml (no-windows !)

tests with empty value
----------------------

Fully empty revset

  $ fileset "status('', '4', added())"
  hg: parse error: first argument to status must be a revision
  [255]
  $ fileset "status('2', '', added())"
  hg: parse error: second argument to status must be a revision
  [255]

Empty revset will error at the revset layer

  $ fileset "status(' ', '4', added())"
  hg: parse error at 1: not a prefix: end
  ( 
    ^ here)
  [255]
  $ fileset "status('2', ' ', added())"
  hg: parse error at 1: not a prefix: end
  ( 
    ^ here)
  [255]