view tests/test-push-checkheads-unpushed-D4.t @ 44950:f9734b2d59cc

py3: make stdout line-buffered if connected to a TTY

Status messages that are to be shown on the terminal should be written to the
file descriptor before anything further is done, to keep the user updated.

One common way to achieve this is to make stdout line-buffered if it is
connected to a TTY. This is done on Python 2 (except on Windows, where libc,
which the CPython 2 streams depend on, does not properly support this).

Python 3 rolls it own I/O streams. On Python 3, buffered binary streams can't be
set line-buffered. The previous code (added in 227ba1afcb65) incorrectly
assumed that on Python 3, pycompat.stdout (sys.stdout.buffer) is already
line-buffered. However the interpreter initializes it with a block-buffered
stream or an unbuffered stream (when the -u option or the PYTHONUNBUFFERED
environment variable is set), never with a line-buffered stream.

One example where the current behavior is unacceptable is when running
`hg pull https://www.mercurial-scm.org/repo/hg` on Python 3, where the line
"pulling from https://www.mercurial-scm.org/repo/hg" does not appear on the
terminal before the hg process blocks while waiting for the server.

Various approaches to fix this problem are possible, including:

1. Weaken the contract of procutil.stdout to not give any guarantees about
   buffering behavior. In this case, users of procutil.stdout need to be
   changed to do enough flushes. In particular,
  1. either ui must insert enough flushes for ui.write() and friends, or
  2. ui.write() and friends get split into flushing and fully buffered
     methods, or
  3. users of ui.write() and friends must flush explicitly.
2. Make stdout unbuffered.
3. Make stdout line-buffered. Since Python 3 does not natively support that for
   binary streams, we must implement it ourselves.

(2.) is problematic because using unbuffered I/O changes the performance
characteristics significantly compared to line-buffered (which is used on
Python 2) and this would be a regression.

(1.2.) and (1.3) are a substantial amount of work. It’s unclear whether the
added complexity would be justified, given that raw performance doesn’t matter
that much when writing to a terminal much faster than the user could read it.

(1.1.) pushes complexity into the ui class instead of separating the concern of
how stdout is buffered. Other users of procutil.stdout would still need to take
care of the flushes.

This patch implements (3.). The general performance considerations are very
similar to (1.1.). The extra method invocation and method forwarding add a
little more overhead if the class is used. In exchange, it doesn’t add overhead
if not used.


For the benchmarks, I compared the previous implementation (incorrect on Python
3), (1.1.), (3.) and (2.). The command was chosen so that the streams were
configured as if they were writing to a TTY, but actually write to a pager,
which is also the default:
HGRCPATH=/dev/null python3 ./hg --cwd ~/vcs/mozilla-central --time --pager yes --config pager.pager='cat > /dev/null' status --all

previous:
time: real 7.880 secs (user 7.290+0.050 sys 0.580+0.170)
time: real 7.830 secs (user 7.220+0.070 sys 0.590+0.140)
time: real 7.800 secs (user 7.210+0.050 sys 0.570+0.170)

(1.1.) using Yuya Nishihara’s patch:
time: real 9.860 secs (user 8.670+0.350 sys 1.160+0.830)
time: real 9.540 secs (user 8.430+0.370 sys 1.100+0.770)
time: real 9.830 secs (user 8.630+0.370 sys 1.180+0.840)

(3.) using this patch:
time: real 9.580 secs (user 8.480+0.350 sys 1.090+0.770)
time: real 9.670 secs (user 8.480+0.330 sys 1.170+0.860)
time: real 9.640 secs (user 8.500+0.350 sys 1.130+0.810)

(2.) using a previous patch by me:
time: real 10.480 secs (user 8.850+0.720 sys 1.590+1.500)
time: real 10.490 secs (user 8.750+0.750 sys 1.710+1.470)
time: real 10.240 secs (user 8.600+0.700 sys 1.590+1.510)


As expected, there’s no difference on Python 2, as exactly the same code paths
are used:

previous:
time: real 6.950 secs (user 5.870+0.330 sys 1.070+0.770)
time: real 7.040 secs (user 6.040+0.360 sys 0.980+0.750)
time: real 7.070 secs (user 5.950+0.360 sys 1.100+0.760)

this patch:
time: real 7.010 secs (user 5.900+0.390 sys 1.070+0.730)
time: real 7.000 secs (user 5.850+0.350 sys 1.120+0.760)
time: real 7.000 secs (user 5.790+0.380 sys 1.170+0.710)

====================================
Testing head checking code: Case D-4
====================================

Mercurial checks for the introduction of new heads on push. Evolution comes
into play to detect if existing branches on the server are being replaced by
some of the new one we push.

This case is part of a series of tests checking this behavior.

Category D: remote head is "obs-affected" locally, but result is not part of the push
TestCase 4: multi-changeset branch, split on multiple other, (base on its own new branch)

.. old-state:
..
.. * 2 branch (1 changeset, and 2 changesets)
..
.. new-state:
..
.. * 1 new branch superceeding the base of the old-2-changesets-branch,
.. * 1 new changesets on the old-1-changeset-branch superceeding the head of the other
..
.. expected-result:
..
.. * push the new branch only -> push denied (variant a)
.. * push the existing branch only -> push allowed (variant b)
.. (pushing all is tested as case A-7)
..
.. graph-summary:
..
.. (variant a)
..
.. B'○⇢ø B
..   | |
.. A | ø⇠◔ A'
..   | |/
.. C ● |
..    \|
..     ●
..
.. or (variant b)
..
.. B'◔⇢ø B
..   | |
.. A | ø⇠○ A'
..   | |/
.. C ● |
..    \|
..     ●

  $ . $TESTDIR/testlib/push-checkheads-util.sh

Test setup
----------

  $ mkdir D4
  $ cd D4
  $ setuprepos
  creating basic server and client repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd server
  $ mkcommit B0
  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkcommit C0
  created new head
  $ cd ../client
  $ hg pull
  pulling from $TESTTMP/D4/server
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)
  new changesets d73caddc5533:0f88766e02d6 (2 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkcommit A1
  created new head
  $ hg up 'desc(C0)'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkcommit B1
  $ hg debugobsolete `getid "desc(A0)" ` `getid "desc(A1)"`
  1 new obsolescence markers
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete `getid "desc(B0)" ` `getid "desc(B1)"`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  d70a1f75a020 (draft): B1
  |
  | o  f6082bc4ffef (draft): A1
  | |
  o |  0f88766e02d6 (draft): C0
  |/
  | x  d73caddc5533 (draft): B0
  | |
  | x  8aaa48160adc (draft): A0
  |/
  o  1e4be0697311 (public): root
  

Actual testing (new branch only)
--------------------------------

  $ hg push --rev 'desc(A1)'
  pushing to $TESTTMP/D4/server
  searching for changes
  abort: push creates new remote head f6082bc4ffef!
  (merge or see 'hg help push' for details about pushing new heads)
  [255]

Actual testing (existing branch only)
------------------------------------

  $ hg push --rev 'desc(B1)'
  pushing to $TESTTMP/D4/server
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  obsoleted 1 changesets

  $ cd ../..