view tests/test-remove.t @ 47965:f9e6f2bb721d

rhg: Don’t compare ambiguous files one byte at a time

Even though the use of `BufReader` reduces the number of syscalls to read
the file from disk, `.bytes()` yields a separate `Result` for every byte.
Creating those results and dispatching on them is most likely costly.

Instead, this commit opts for simplicity by reading the entire file into memory
and comparing a single pair of byte strings. Note that memory already needs to
contain the entire previous contents of the file, as read from the filelog.
So with an extremely large file this doubles memory use but does not make it
grow by orders of magnitude.

At first I wrote code that still avoids reading the entire file into memory
and compares one buffer at a time with `BufReader`. Find this code below for
posterity. However its correctness is subtle. I ended up preferring the
simplicity of the obviously-correct single comparison.

```rust
let mut reader = BufReader::new(fobj);
let mut expected = &contents_in_p1[..];
loop {
    let buf = reader.fill_buf().when_reading_file(&fs_path)?;
    if buf.is_empty() {
        // Found EOF
        return Ok(expected.is_empty());
    } else if let Some(rest) = expected.drop_prefix(buf) {
        // What we read so far matches the expected content, continue reading
        let buf_len = buf.len();
        reader.consume(buf_len);
        expected = rest
    } else {
        // Found different content
        return Ok(false);
    }
}
```

Differential Revision: https://phab.mercurial-scm.org/D11412

  $ remove() {
  >     hg rm $@
  >     echo "exit code: $?"
  >     hg st
  >     # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
  >     find . -name .hg -prune -o -type f -print | sort
  >     hg up -C
  > }

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > disable=False
  > assume-tty = 1
  > delay = 0
  > # set changedelay really large so we don't see nested topics
  > changedelay = 30000
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg init a
  $ cd a
  $ echo a > foo

file not managed

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is untracked
  exit code: 1
  ? foo
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg add foo
  $ hg commit -m1

the table cases
00 state added, options none

  $ echo b > bar
  $ hg add bar
  $ remove bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file has been marked for add (use 'hg forget' to undo add)
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

01 state clean, options none

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

02 state modified, options none

  $ echo b >> foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is modified (use -f to force removal)
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

03 state missing, options none

  $ rm foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

10 state added, options -f

  $ echo b > bar
  $ hg add bar
  $ remove -f bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

11 state clean, options -f

  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

12 state modified, options -f

  $ echo b >> foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

13 state missing, options -f

  $ rm foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

20 state added, options -A

  $ echo b > bar
  $ hg add bar
  $ remove -A bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file still exists
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

21 state clean, options -Av

  $ remove -Av foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

22 state modified, options -Av

  $ echo b >> foo
  $ remove -Av foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

23 state missing, options -A

  $ rm foo
  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

30 state added, options -Af

  $ echo b > bar
  $ hg add bar
  $ remove -Af bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

31 state clean, options -Af

  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

32 state modified, options -Af

  $ echo b >> foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

33 state missing, options -Af

  $ rm foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

test some directory stuff

  $ mkdir test
  $ echo a > test/foo
  $ echo b > test/bar
  $ hg ci -Am2
  adding test/bar
  adding test/foo

dir, options none

  $ rm test/bar
  $ remove test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  removing test/foo
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -f

  $ rm test/bar
  $ remove -f test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  removing test/foo
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Av

  $ rm test/bar
  $ remove -Av test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  not removing test/foo: file still exists
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -A <dir>
  $ rm test/bar
  $ remove -A test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

without any files/dirs, options -A
  $ rm test/bar
  $ remove -A
  \r (no-eol) (esc)
  skipping [=====================>                      ] 1/2\r (no-eol) (esc)
  skipping [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Af

  $ rm test/bar
  $ remove -Af test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  removing test/foo
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

test remove dropping empty trees (issue1861)

  $ mkdir -p issue1861/b/c
  $ echo x > issue1861/x
  $ echo y > issue1861/b/c/y
  $ hg ci -Am add
  adding issue1861/b/c/y
  adding issue1861/x
  $ hg rm issue1861/b
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing issue1861/b/c/y
  $ hg ci -m remove
  $ ls issue1861
  x

test that commit does not crash if the user removes a newly added file

  $ touch f1
  $ hg add f1
  $ rm f1
  $ hg ci -A -mx
  removing f1
  nothing changed
  [1]

handling of untracked directories and missing files

  $ mkdir d1
  $ echo a > d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing d1: no tracked files
  [1]
  $ hg add d1/a
  $ rm d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing d1/a

  $ hg rm --after nosuch
  nosuch: * (glob)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  [1]

test dry-run for remove

  $ hg init testdryrun
  $ cd testdryrun
  $ echo a>a
  $ hg ci -qAm1
  $ hg remove a -nv
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing a
  $ hg remove a -nv --color debug
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  [ui.addremove.removed ui.status|removing a]
  $ hg diff

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > largefiles=
  > EOF
  $ echo 'B as largefile' > B
  $ hg add --large B
  $ hg ci -m "B"
  $ hg remove B -nv
  removing B
  $ hg st

  $ cd ..