# Danish translations for Mercurial
# Danske oversættelser for Mercurial
# Copyright (C) 2009 Matt Mackall and others
#
# Translation dictionary:
#
# changeset ændring
# merge sammenføje
# patch rettelse
# repo(sitory) arkiv
# revision revision
# tag mærke
#
msgid ""
msgstr ""
"Project-Id-Version: Mercurial\n"
"POT-Creation-Date: 2009-01-25 12:26+CET\n"
"PO-Revision-Date: 2009-01-25 12:28+0100\n"
"Last-Translator: <mg@daimi.au.dk>\n"
"Language-Team: Danish\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
msgid " (default: %s)"
msgstr " (standard: %s)"
msgid "OPTIONS"
msgstr ""
msgid "COMMANDS"
msgstr ""
msgid " options:\n"
msgstr ""
msgid ""
" aliases: %s\n"
"\n"
msgstr ""
" aliaser %s:\n"
"\n"
msgid "return tuple of (match function, list enabled)."
msgstr ""
msgid "acl: %s not enabled\n"
msgstr "acl: %s er ikke slået til\n"
msgid "acl: %s enabled, %d entries for user %s\n"
msgstr "acl: %s slået til, %d indgange for bruger %s\n"
msgid "config error - hook type \"%s\" cannot stop incoming changesets"
msgstr ""
"konfigurationsfejl - hook type \"%s\" kan ikke stoppe indgående ændringer"
msgid "acl: changes have source \"%s\" - skipping\n"
msgstr "acl: ændringer har kilde \"%s\" - springer over\n"
msgid "acl: user %s denied on %s\n"
msgstr "acl: bruger %s nægtet adgang til %s\n"
msgid "acl: access denied for changeset %s"
msgstr "acl: adgang nægtet til ændring %s"
msgid "acl: user %s not allowed on %s\n"
msgstr "acl: bruger %s ikke tilladt på %s\n"
msgid "acl: allowing changeset %s\n"
msgstr "acl: tillader ændring %s\n"
msgid ""
"allow user-defined command aliases\n"
"\n"
"To use, create entries in your hgrc of the form\n"
"\n"
"[alias]\n"
"mycmd = cmd --args\n"
msgstr ""
msgid ""
"defer command lookup until needed, so that extensions loaded\n"
" after alias can be aliased"
msgstr ""
msgid "*** [alias] %s: command %s is unknown"
msgstr ""
msgid "*** [alias] %s: command %s is ambiguous"
msgstr ""
msgid "*** [alias] %s: circular dependency on %s"
msgstr ""
msgid "*** [alias] %s: no definition\n"
msgstr ""
msgid ""
"mercurial bookmarks\n"
"\n"
"Mercurial bookmarks are local moveable pointers to changesets. Every\n"
"bookmark points to a changeset identified by its hash. If you commit a\n"
"changeset that is based on a changeset that has a bookmark on it, the\n"
"bookmark is forwarded to the new changeset.\n"
"\n"
"It is possible to use bookmark names in every revision lookup (e.g. hg\n"
"merge, hg update).\n"
"\n"
"The bookmark extension offers the possiblity to have a more git-like "
"experience\n"
"by adding the following configuration option to your .hgrc:\n"
"\n"
"[bookmarks]\n"
"track.current = True\n"
"\n"
"This will cause bookmarks to track the bookmark that you are currently on, "
"and\n"
"just updates it. This is similar to git's approach of branching.\n"
msgstr ""
msgid ""
"Parse .hg/bookmarks file and return a dictionary\n"
"\n"
" Bookmarks are stored as {HASH}\\s{NAME}\n"
" (localtags format) values\n"
" in the .hg/bookmarks file. They are read by the parse() method and\n"
" returned as a dictionary with name => hash values.\n"
"\n"
" The parsed dictionary is cached until a write() operation is done.\n"
" "
msgstr ""
msgid ""
"Write bookmarks\n"
"\n"
" Write the given bookmark => hash dictionary to the .hg/bookmarks file\n"
" in a format equal to those of localtags.\n"
"\n"
" We also store a backup of the previous state in undo.bookmarks that\n"
" can be copied back on rollback.\n"
" "
msgstr ""
msgid ""
"Get the current bookmark\n"
"\n"
" If we use gittishsh branches we have a current bookmark that\n"
" we are on. This function returns the name of the bookmark. It\n"
" is stored in .hg/bookmarks.current\n"
" "
msgstr ""
msgid ""
"Set the name of the bookmark that we are currently on\n"
"\n"
" Set the name of the bookmark that we are on (hg update <bookmark>).\n"
" The name is recoreded in .hg/bookmarks.current\n"
" "
msgstr ""
msgid ""
"mercurial bookmarks\n"
"\n"
" Bookmarks are pointers to certain commits that move when\n"
" commiting. Bookmarks are local. They can be renamed, copied and\n"
" deleted. It is possible to use bookmark names in 'hg merge' and 'hg\n"
" update' to update to a given bookmark.\n"
"\n"
" You can use 'hg bookmark NAME' to set a bookmark on the current\n"
" tip with the given name. If you specify a revision using -r REV\n"
" (where REV may be an existing bookmark), the bookmark is set to\n"
" that revision.\n"
" "
msgstr ""
msgid "a bookmark of this name does not exist"
msgstr ""
msgid "a bookmark of the same name already exists"
msgstr ""
msgid "new bookmark name required"
msgstr ""
msgid "bookmark name required"
msgstr ""
msgid "bookmark name cannot contain newlines"
msgstr "bogmærkenavn kan ikke indeholde linieskift"
msgid "a bookmark cannot have the name of an existing branch"
msgstr ""
msgid ""
"Strip bookmarks if revisions are stripped using\n"
" the mercurial.strip method. This usually happens during\n"
" qpush and qpop"
msgstr ""
msgid ""
"Add a revision to the repository and\n"
" move the bookmark"
msgstr ""
msgid "Merge bookmarks with normal tags"
msgstr ""
msgid ""
"Set the current bookmark\n"
"\n"
" If the user updates to a bookmark we update the .hg/bookmarks.current\n"
" file.\n"
" "
msgstr ""
msgid "force"
msgstr ""
msgid "revision"
msgstr ""
msgid "delete a given bookmark"
msgstr ""
msgid "rename a given bookmark"
msgstr ""
msgid "hg bookmarks [-d] [-m NAME] [-r NAME] [NAME]"
msgstr ""
msgid ""
"Bugzilla integration\n"
"\n"
"This hook extension adds comments on bugs in Bugzilla when changesets\n"
"that refer to bugs by Bugzilla ID are seen. The hook does not change bug\n"
"status.\n"
"\n"
"The hook updates the Bugzilla database directly. Only Bugzilla "
"installations\n"
"using MySQL are supported.\n"
"\n"
"The hook relies on a Bugzilla script to send bug change notification "
"emails.\n"
"That script changes between Bugzilla versions; the 'processmail' script "
"used\n"
"prior to 2.18 is replaced in 2.18 and subsequent versions by\n"
"'config/sendbugmail.pl'. Note that these will be run by Mercurial as the "
"user\n"
"pushing the change; you will need to ensure the Bugzilla install file\n"
"permissions are set appropriately.\n"
"\n"
"Configuring the extension:\n"
"\n"
" [bugzilla]\n"
" host Hostname of the MySQL server holding the Bugzilla database.\n"
" db Name of the Bugzilla database in MySQL. Default 'bugs'.\n"
" user Username to use to access MySQL server. Default 'bugs'.\n"
" password Password to use to access MySQL server.\n"
" timeout Database connection timeout (seconds). Default 5.\n"
" version Bugzilla version. Specify '3.0' for Bugzilla versions 3.0 "
"and\n"
" later, '2.18' for Bugzilla versions from 2.18 and '2.16' for\n"
" versions prior to 2.18.\n"
" bzuser Fallback Bugzilla user name to record comments with, if\n"
" changeset committer cannot be found as a Bugzilla user.\n"
" bzdir Bugzilla install directory. Used by default notify.\n"
" Default '/var/www/html/bugzilla'.\n"
" notify The command to run to get Bugzilla to send bug change\n"
" notification emails. Substitutes from a map with 3 keys,\n"
" 'bzdir', 'id' (bug id) and 'user' (committer bugzilla "
"email).\n"
" Default depends on version; from 2.18 it is\n"
" \"cd %(bzdir)s && perl -T contrib/sendbugmail.pl %(id)s %"
"(user)s\".\n"
" regexp Regular expression to match bug IDs in changeset commit "
"message.\n"
" Must contain one \"()\" group. The default expression "
"matches\n"
" 'Bug 1234', 'Bug no. 1234', 'Bug number 1234',\n"
" 'Bugs 1234,5678', 'Bug 1234 and 5678' and variations "
"thereof.\n"
" Matching is case insensitive.\n"
" style The style file to use when formatting comments.\n"
" template Template to use when formatting comments. Overrides\n"
" style if specified. In addition to the usual Mercurial\n"
" keywords, the extension specifies:\n"
" {bug} The Bugzilla bug ID.\n"
" {root} The full pathname of the Mercurial "
"repository.\n"
" {webroot} Stripped pathname of the Mercurial "
"repository.\n"
" {hgweb} Base URL for browsing Mercurial "
"repositories.\n"
" Default 'changeset {node|short} in repo {root} refers '\n"
" 'to bug {bug}.\\ndetails:\\n\\t{desc|tabindent}'\n"
" strip The number of slashes to strip from the front of {root}\n"
" to produce {webroot}. Default 0.\n"
" usermap Path of file containing Mercurial committer ID to Bugzilla "
"user\n"
" ID mappings. If specified, the file should contain one "
"mapping\n"
" per line, \"committer\"=\"Bugzilla user\". See also the\n"
" [usermap] section.\n"
"\n"
" [usermap]\n"
" Any entries in this section specify mappings of Mercurial committer ID\n"
" to Bugzilla user ID. See also [bugzilla].usermap.\n"
" \"committer\"=\"Bugzilla user\"\n"
"\n"
" [web]\n"
" baseurl Base URL for browsing Mercurial repositories. Reference from\n"
" templates as {hgweb}.\n"
"\n"
"Activating the extension:\n"
"\n"
" [extensions]\n"
" hgext.bugzilla =\n"
"\n"
" [hooks]\n"
" # run bugzilla hook on every change pulled or pushed in here\n"
" incoming.bugzilla = python:hgext.bugzilla.hook\n"
"\n"
"Example configuration:\n"
"\n"
"This example configuration is for a collection of Mercurial repositories\n"
"in /var/local/hg/repos/ used with a local Bugzilla 3.2 installation in\n"
"/opt/bugzilla-3.2.\n"
"\n"
" [bugzilla]\n"
" host=localhost\n"
" password=XYZZY\n"
" version=3.0\n"
" bzuser=unknown@domain.com\n"
" bzdir=/opt/bugzilla-3.2\n"
" template=Changeset {node|short} in {root|basename}.\\n{hgweb}/{webroot}/"
"rev/{node|short}\\n\\n{desc}\\n\n"
" strip=5\n"
"\n"
" [web]\n"
" baseurl=http://dev.domain.com/hg\n"
"\n"
" [usermap]\n"
" user@emaildomain.com=user.name@bugzilladomain.com\n"
"\n"
"Commits add a comment to the Bugzilla bug record of the form:\n"
"\n"
" Changeset 3b16791d6642 in repository-name.\n"
" http://dev.domain.com/hg/repository-name/rev/3b16791d6642\n"
"\n"
" Changeset commit comment. Bug 1234.\n"
msgstr ""
msgid "support for bugzilla version 2.16."
msgstr ""
msgid "connecting to %s:%s as %s, password %s\n"
msgstr "forbinder til %s:%s som %s, kodeord %s\n"
msgid "run a query."
msgstr ""
msgid "query: %s %s\n"
msgstr "forespørgsel: %s %s\n"
msgid "failed query: %s %s\n"
msgstr "fejlet forespørgsel: %s %s\n"
msgid "get identity of longdesc field"
msgstr ""
msgid "unknown database schema"
msgstr "ukendt databaseskema"
msgid "filter not-existing bug ids from list."
msgstr ""
msgid "filter bug ids from list that already refer to this changeset."
msgstr ""
msgid "bug %d already knows about changeset %s\n"
msgstr "fejl %d kender allerede til ændring %s\n"
msgid "tell bugzilla to send mail."
msgstr ""
msgid "telling bugzilla to send mail:\n"
msgstr "beder bugzilla om at sende mail:\n"
msgid " bug %s\n"
msgstr " fejl %s\n"
msgid "running notify command %s\n"
msgstr "kører notificeringskommando %s\n"
msgid "bugzilla notify command %s"
msgstr ""
msgid "done\n"
msgstr "færdig\n"
msgid "look up numeric bugzilla user id."
msgstr ""
msgid "looking up user %s\n"
msgstr "slår bruger %s op\n"
msgid "map name of committer to bugzilla user name."
msgstr ""
msgid ""
"see if committer is a registered bugzilla user. Return\n"
" bugzilla username and userid if so. If not, return default\n"
" bugzilla username and userid."
msgstr ""
msgid "cannot find bugzilla user id for %s"
msgstr ""
msgid "cannot find bugzilla user id for %s or %s"
msgstr ""
msgid ""
"add comment to bug. try adding comment as committer of\n"
" changeset, otherwise as default bugzilla user."
msgstr ""
msgid "support for bugzilla 2.18 series."
msgstr ""
msgid "support for bugzilla 3.0 series."
msgstr ""
msgid ""
"return object that knows how to talk to bugzilla version in\n"
" use."
msgstr ""
msgid "bugzilla version %s not supported"
msgstr ""
msgid ""
"find valid bug ids that are referred to in changeset\n"
" comments and that do not already have references to this\n"
" changeset."
msgstr ""
msgid "update bugzilla bug with reference to changeset."
msgstr ""
msgid ""
"strip leading prefix of repo root and turn into\n"
" url-safe path."
msgstr ""
msgid ""
"changeset {node|short} in repo {root} refers to bug {bug}.\n"
"details:\n"
"\t{desc|tabindent}"
msgstr ""
msgid ""
"add comment to bugzilla for each changeset that refers to a\n"
" bugzilla bug id. only add a comment once per bug, so same change\n"
" seen multiple times does not fill bug with duplicate data."
msgstr ""
msgid "python mysql support not available: %s"
msgstr ""
msgid "hook type %s does not pass a changeset id"
msgstr ""
msgid "database error: %s"
msgstr ""
msgid ""
"show the children of the given or working dir revision\n"
"\n"
" Print the children of the working directory's revisions.\n"
" If a revision is given via --rev, the children of that revision\n"
" will be printed. If a file argument is given, revision in\n"
" which the file was last changed (after the working directory\n"
" revision or the argument to --rev if given) is printed.\n"
" "
msgstr ""
msgid "show children of the specified rev"
msgstr ""
msgid "hg children [-r REV] [FILE]"
msgstr ""
msgid "command to show certain statistics about revision history"
msgstr ""
msgid "Calculate stats"
msgstr ""
msgid "Revision %d is a merge, ignoring...\n"
msgstr ""
msgid "\rgenerating stats: %d%%"
msgstr ""
msgid ""
"graph count of revisions grouped by template\n"
"\n"
" Will graph count of changed lines or revisions grouped by template or\n"
" alternatively by date, if dateformat is used. In this case it will "
"override\n"
" template.\n"
"\n"
" By default statistics are counted for number of changed lines.\n"
"\n"
" Examples:\n"
"\n"
" # display count of changed lines for every committer\n"
" hg churn -t '{author|email}'\n"
"\n"
" # display daily activity graph\n"
" hg churn -f '%H' -s -c\n"
"\n"
" # display activity of developers by month\n"
" hg churn -f '%Y-%m' -s -c\n"
"\n"
" # display count of lines changed in every year\n"
" hg churn -f '%Y' -s\n"
"\n"
" The map file format used to specify aliases is fairly simple:\n"
"\n"
" <alias email> <actual email>"
msgstr ""
"plot antallet af revisioner grupperet efter et mønster\n"
"\n"
" Plotter antallet af ændrede linier eller antallet af revisioner\n"
" grupperet efter et mønster eller alternativt efter dato, hvis\n"
" dateformat bruges. I så tilfælde bruges mønstret ikke.\n"
"\n"
" Som udgangspunkt laves der statistik over antallet af ændrede\n"
" linier.\n"
"\n"
" Eksempler:\n"
"\n"
" # viser antaller af ændrede linier for hver bruger\n"
" hg churn -t '{author|email}'\n"
"\n"
" # viser graf over daglig aktivitet\n"
" hg churn -f '%H' -s -c\n"
"\n"
" # viser månedlig aktivitet af udviklerne\n"
" hg churn -f '%Y-%m' -s -c\n"
"\n"
" # viser antallet af linier ændret hvert år\n"
" hg churn -f '%Y' -s\n"
"\n"
" Formatet for map-filen er rimelig simpelt:\n"
"\n"
" <alias email> <faktisk email>"
msgid "assuming %i character terminal\n"
msgstr ""
msgid "count rate for the specified revision or range"
msgstr "lav statistik for de specificerede revisioner"
msgid "count rate for revs matching date spec"
msgstr "lav statistik for revisioner som matcher dato specifikationen"
msgid "template to group changesets"
msgstr "mønster for gruppering af ændringer"
msgid "strftime-compatible format for grouping by date"
msgstr "strftime-kompatibelt format til gruppering efter dato"
msgid "count rate by number of changesets"
msgstr "lav statistik efter antallet af ændringer"
msgid "sort by key (default: sort by count)"
msgstr "sortér efter nøgle (standard: sortering efter antal)"
msgid "file with email aliases"
msgstr "fil med email-aliaser"
msgid "show progress"
msgstr "vis fremskridt"
msgid "hg churn [-d DATE] [-r REV] [--aliases FILE] [--progress] [FILE]"
msgstr "hg churn [-d DATO] [-r REVISIONER] [--aliases FIL] [--progress] [FIL]"
msgid ""
"add color output to status, qseries, and diff-related commands\n"
"\n"
"This extension modifies the status command to add color to its output to\n"
"reflect file status, the qseries command to add color to reflect patch "
"status\n"
"(applied, unapplied, missing), and to diff-related commands to highlight\n"
"additions, removals, diff headers, and trailing whitespace.\n"
"\n"
"Other effects in addition to color, like bold and underlined text, are also\n"
"available. Effects are rendered with the ECMA-48 SGR control function (aka\n"
"ANSI escape codes). This module also provides the render_text function,\n"
"which can be used to add effects to any text.\n"
"\n"
"To enable this extension, add this to your .hgrc file:\n"
"[extensions]\n"
"color =\n"
"\n"
"Default effects my be overriden from the .hgrc file:\n"
"\n"
"[color]\n"
"status.modified = blue bold underline red_background\n"
"status.added = green bold\n"
"status.removed = red bold blue_background\n"
"status.deleted = cyan bold underline\n"
"status.unknown = magenta bold underline\n"
"status.ignored = black bold\n"
"\n"
"# 'none' turns off all effects\n"
"status.clean = none\n"
"status.copied = none\n"
"\n"
"qseries.applied = blue bold underline\n"
"qseries.unapplied = black bold\n"
"qseries.missing = red bold\n"
"\n"
"diff.diffline = bold\n"
"diff.extended = cyan bold\n"
"diff.file_a = red bold\n"
"diff.file_b = green bold\n"
"diff.hunk = magenta\n"
"diff.deleted = red\n"
"diff.inserted = green\n"
"diff.changed = white\n"
"diff.trailingwhitespace = bold red_background\n"
msgstr ""
msgid "Wrap text in commands to turn on each effect."
msgstr ""
msgid "run the status command with colored output"
msgstr ""
msgid "run the qseries command with colored output"
msgstr ""
msgid "wrap ui.write for colored diff output"
msgstr ""
msgid "wrap cmdutil.changeset_printer.showpatch with colored output"
msgstr ""
msgid "run the diff command with colored output"
msgstr ""
msgid "Initialize the extension."
msgstr ""
msgid "patch in command to command table and load effect map"
msgstr ""
msgid "when to colorize (always, auto, or never)"
msgstr ""
msgid "don't colorize output"
msgstr ""
msgid "converting foreign VCS repositories to Mercurial"
msgstr ""
msgid ""
"convert a foreign SCM repository to a Mercurial one.\n"
"\n"
" Accepted source formats [identifiers]:\n"
" - Mercurial [hg]\n"
" - CVS [cvs]\n"
" - Darcs [darcs]\n"
" - git [git]\n"
" - Subversion [svn]\n"
" - Monotone [mtn]\n"
" - GNU Arch [gnuarch]\n"
" - Bazaar [bzr]\n"
"\n"
" Accepted destination formats [identifiers]:\n"
" - Mercurial [hg]\n"
" - Subversion [svn] (history on branches is not preserved)\n"
"\n"
" If no revision is given, all revisions will be converted. Otherwise,\n"
" convert will only import up to the named revision (given in a format\n"
" understood by the source).\n"
"\n"
" If no destination directory name is specified, it defaults to the\n"
" basename of the source with '-hg' appended. If the destination\n"
" repository doesn't exist, it will be created.\n"
"\n"
" If <REVMAP> isn't given, it will be put in a default location\n"
" (<dest>/.hg/shamap by default). The <REVMAP> is a simple text\n"
" file that maps each source commit ID to the destination ID for\n"
" that revision, like so:\n"
" <source ID> <destination ID>\n"
"\n"
" If the file doesn't exist, it's automatically created. It's updated\n"
" on each commit copied, so convert-repo can be interrupted and can\n"
" be run repeatedly to copy new commits.\n"
"\n"
" The [username mapping] file is a simple text file that maps each source\n"
" commit author to a destination commit author. It is handy for source "
"SCMs\n"
" that use unix logins to identify authors (eg: CVS). One line per author\n"
" mapping and the line format is:\n"
" srcauthor=whatever string you want\n"
"\n"
" The filemap is a file that allows filtering and remapping of files\n"
" and directories. Comment lines start with '#'. Each line can\n"
" contain one of the following directives:\n"
"\n"
" include path/to/file\n"
"\n"
" exclude path/to/file\n"
"\n"
" rename from/file to/file\n"
"\n"
" The 'include' directive causes a file, or all files under a\n"
" directory, to be included in the destination repository, and the\n"
" exclusion of all other files and dirs not explicitely included.\n"
" The 'exclude' directive causes files or directories to be omitted.\n"
" The 'rename' directive renames a file or directory. To rename from a\n"
" subdirectory into the root of the repository, use '.' as the path to\n"
" rename to.\n"
"\n"
" The splicemap is a file that allows insertion of synthetic\n"
" history, letting you specify the parents of a revision. This is\n"
" useful if you want to e.g. give a Subversion merge two parents, or\n"
" graft two disconnected series of history together. Each entry\n"
" contains a key, followed by a space, followed by one or two\n"
" values, separated by spaces. The key is the revision ID in the\n"
" source revision control system whose parents should be modified\n"
" (same format as a key in .hg/shamap). The values are the revision\n"
" IDs (in either the source or destination revision control system)\n"
" that should be used as the new parents for that node.\n"
"\n"
" Mercurial Source\n"
" -----------------\n"
"\n"
" --config convert.hg.ignoreerrors=False (boolean)\n"
" ignore integrity errors when reading. Use it to fix Mercurial\n"
" repositories with missing revlogs, by converting from and to\n"
" Mercurial.\n"
" --config convert.hg.saverev=True (boolean)\n"
" allow target to preserve source revision ID\n"
" --config convert.hg.startrev=0 (hg revision identifier)\n"
" convert start revision and its descendants\n"
"\n"
" CVS Source\n"
" ----------\n"
"\n"
" CVS source will use a sandbox (i.e. a checked-out copy) from CVS\n"
" to indicate the starting point of what will be converted. Direct\n"
" access to the repository files is not needed, unless of course\n"
" the repository is :local:. The conversion uses the top level\n"
" directory in the sandbox to find the CVS repository, and then uses\n"
" CVS rlog commands to find files to convert. This means that unless\n"
" a filemap is given, all files under the starting directory will be\n"
" converted, and that any directory reorganisation in the CVS\n"
" sandbox is ignored.\n"
"\n"
" Because CVS does not have changesets, it is necessary to collect\n"
" individual commits to CVS and merge them into changesets. CVS\n"
" source uses its internal changeset merging code by default but can\n"
" be configured to call the external 'cvsps' program by setting:\n"
" --config convert.cvsps='cvsps -A -u --cvs-direct -q'\n"
" This is a legacy option and may be removed in future.\n"
"\n"
" The options shown are the defaults.\n"
"\n"
" Internal cvsps is selected by setting\n"
" --config convert.cvsps=builtin\n"
" and has a few more configurable options:\n"
" --config convert.cvsps.fuzz=60 (integer)\n"
" Specify the maximum time (in seconds) that is allowed between\n"
" commits with identical user and log message in a single\n"
" changeset. When very large files were checked in as part\n"
" of a changeset then the default may not be long enough.\n"
" --config convert.cvsps.mergeto='{{mergetobranch ([-\\w]+)}}'\n"
" Specify a regular expression to which commit log messages are\n"
" matched. If a match occurs, then the conversion process will\n"
" insert a dummy revision merging the branch on which this log\n"
" message occurs to the branch indicated in the regex.\n"
" --config convert.cvsps.mergefrom='{{mergefrombranch ([-\\w]+)}}'\n"
" Specify a regular expression to which commit log messages are\n"
" matched. If a match occurs, then the conversion process will\n"
" add the most recent revision on the branch indicated in the\n"
" regex as the second parent of the changeset.\n"
"\n"
" The hgext/convert/cvsps wrapper script allows the builtin changeset\n"
" merging code to be run without doing a conversion. Its parameters and\n"
" output are similar to that of cvsps 2.1.\n"
"\n"
" Subversion Source\n"
" -----------------\n"
"\n"
" Subversion source detects classical trunk/branches/tags layouts.\n"
" By default, the supplied \"svn://repo/path/\" source URL is\n"
" converted as a single branch. If \"svn://repo/path/trunk\" exists\n"
" it replaces the default branch. If \"svn://repo/path/branches\"\n"
" exists, its subdirectories are listed as possible branches. If\n"
" \"svn://repo/path/tags\" exists, it is looked for tags referencing\n"
" converted branches. Default \"trunk\", \"branches\" and \"tags\" values\n"
" can be overriden with following options. Set them to paths\n"
" relative to the source URL, or leave them blank to disable\n"
" autodetection.\n"
"\n"
" --config convert.svn.branches=branches (directory name)\n"
" specify the directory containing branches\n"
" --config convert.svn.tags=tags (directory name)\n"
" specify the directory containing tags\n"
" --config convert.svn.trunk=trunk (directory name)\n"
" specify the name of the trunk branch\n"
"\n"
" Source history can be retrieved starting at a specific revision,\n"
" instead of being integrally converted. Only single branch\n"
" conversions are supported.\n"
"\n"
" --config convert.svn.startrev=0 (svn revision number)\n"
" specify start Subversion revision.\n"
"\n"
" Mercurial Destination\n"
" ---------------------\n"
"\n"
" --config convert.hg.clonebranches=False (boolean)\n"
" dispatch source branches in separate clones.\n"
" --config convert.hg.tagsbranch=default (branch name)\n"
" tag revisions branch name\n"
" --config convert.hg.usebranchnames=True (boolean)\n"
" preserve branch names\n"
"\n"
" "
msgstr ""
msgid ""
"create changeset information from CVS\n"
"\n"
" This command is intended as a debugging tool for the CVS to Mercurial\n"
" converter, and can be used as a direct replacement for cvsps.\n"
"\n"
" Hg debugcvsps reads the CVS rlog for current directory (or any named\n"
" directory) in the CVS repository, and converts the log to a series of\n"
" changesets based on matching commit log entries and dates."
msgstr ""
msgid "username mapping filename"
msgstr ""
msgid "destination repository type"
msgstr "type for destinations repository"
msgid "remap file names using contents of file"
msgstr ""
msgid "import up to target revision REV"
msgstr ""
msgid "source repository type"
msgstr ""
msgid "splice synthesized history into place"
msgstr ""
msgid "try to sort changesets by date"
msgstr ""
msgid "hg convert [OPTION]... SOURCE [DEST [REVMAP]]"
msgstr ""
msgid "only return changes on specified branches"
msgstr ""
msgid "prefix to remove from file names"
msgstr ""
msgid "only return changes after or between specified tags"
msgstr ""
msgid "update cvs log cache"
msgstr ""
msgid "create new cvs log cache"
msgstr ""
msgid "set commit time fuzz in seconds"
msgstr ""
msgid "specify cvsroot"
msgstr ""
msgid "show parent changesets"
msgstr "vis forældre-ændring"
msgid "show current changeset in ancestor branches"
msgstr ""
msgid "%s is not a valid revision in current branch"
msgstr ""
msgid "%s is not available in %s anymore"
msgstr ""
msgid "cannot find required \"%s\" tool"
msgstr ""
msgid "running: %s\n"
msgstr "kører: %s\n"
msgid "%s error:\n"
msgstr ""
msgid "%s %s"
msgstr ""
msgid "could not open map file %r: %s"
msgstr ""
msgid "%s: missing or unsupported repository"
msgstr ""
msgid "convert: %s\n"
msgstr ""
msgid "%s: unknown repository type"
msgstr ""
msgid "cycle detected between %s and %s"
msgstr ""
msgid "not all revisions were sorted"
msgstr ""
msgid "Writing author map file %s\n"
msgstr ""
msgid "Overriding mapping for author %s, was %s, will be %s\n"
msgstr ""
msgid "mapping author %s to %s\n"
msgstr ""
msgid "Ignoring bad line in author map file %s: %s\n"
msgstr ""
msgid "spliced in %s as parents of %s\n"
msgstr ""
msgid "scanning source...\n"
msgstr ""
msgid "sorting...\n"
msgstr ""
msgid "converting...\n"
msgstr ""
msgid "source: %s\n"
msgstr ""
msgid "assuming destination %s\n"
msgstr ""
msgid "revision %s is not a patchset number or date"
msgstr ""
msgid "using builtin cvsps\n"
msgstr ""
msgid "connecting to %s\n"
msgstr ""
msgid "CVS pserver authentication failed"
msgstr ""
msgid "server sucks"
msgstr ""
msgid "%d bytes missing from remote file"
msgstr ""
msgid "cvs server: %s\n"
msgstr ""
msgid "unknown CVS response: %s"
msgstr ""
msgid "collecting CVS rlog\n"
msgstr ""
msgid "reading cvs log cache %s\n"
msgstr ""
msgid "cache has %d log entries\n"
msgstr ""
msgid "error reading cache: %r\n"
msgstr ""
msgid "running %s\n"
msgstr "kører %s\n"
msgid "prefix=%r directory=%r root=%r\n"
msgstr ""
msgid "RCS file must be followed by working file"
msgstr ""
msgid "must have at least some revisions"
msgstr ""
msgid "expected revision number"
msgstr ""
msgid "revision must be followed by date line"
msgstr ""
msgid "writing cvs log cache %s\n"
msgstr ""
msgid "%d log entries\n"
msgstr ""
msgid "creating changesets\n"
msgstr ""
msgid "%d changeset entries\n"
msgstr ""
msgid "Python ElementTree module is not available"
msgstr ""
msgid "cleaning up %s\n"
msgstr ""
msgid "internal calling inconsistency"
msgstr ""
msgid "errors in filemap"
msgstr ""
msgid "%s:%d: %r already in %s list\n"
msgstr ""
msgid "%s:%d: unknown directive %r\n"
msgstr ""
msgid "source repository doesn't support --filemap"
msgstr ""
msgid "%s does not look like a GNU Arch repo"
msgstr ""
msgid "cannot find a GNU Arch tool"
msgstr ""
msgid "analyzing tree version %s...\n"
msgstr ""
msgid ""
"tree analysis stopped because it points to an unregistered archive %s...\n"
msgstr ""
msgid "applying revision %s...\n"
msgstr ""
msgid "computing changeset between %s and %s...\n"
msgstr ""
msgid "obtaining revision %s...\n"
msgstr ""
msgid "analysing revision %s...\n"
msgstr ""
msgid "could not parse cat-log of %s"
msgstr ""
msgid "%s is not a local Mercurial repo"
msgstr ""
msgid "initializing destination %s repository\n"
msgstr ""
msgid "run hg sink pre-conversion action\n"
msgstr ""
msgid "run hg sink post-conversion action\n"
msgstr ""
msgid "pulling from %s into %s\n"
msgstr ""
msgid "updating tags\n"
msgstr ""
msgid "%s is not a valid start revision"
msgstr ""
msgid "ignoring: %s\n"
msgstr "ignorerer: %s\n"
msgid "run hg source pre-conversion action\n"
msgstr ""
msgid "run hg source post-conversion action\n"
msgstr ""
msgid "%s does not look like a monotone repo"
msgstr ""
msgid "copying file in renamed dir from '%s' to '%s'"
msgstr ""
msgid "Subversion python bindings could not be loaded"
msgstr ""
msgid "Subversion python bindings %d.%d found, 1.4 or later required"
msgstr ""
msgid "Subversion python bindings are too old, 1.4 or later required"
msgstr ""
msgid "svn: revision %s is not an integer"
msgstr ""
msgid "svn: start revision %s is not an integer"
msgstr ""
msgid "no revision found in module %s"
msgstr ""
msgid "expected %s to be at %r, but not found"
msgstr ""
msgid "found %s at %r\n"
msgstr ""
msgid "ignoring empty branch %s\n"
msgstr ""
msgid "found branch %s at %d\n"
msgstr ""
msgid "svn: start revision is not supported with with more than one branch"
msgstr ""
msgid "svn: no revision found after start revision %d"
msgstr ""
msgid "no tags found at revision %d\n"
msgstr ""
msgid "ignoring foreign branch %r\n"
msgstr ""
msgid "%s not found up to revision %d"
msgstr ""
msgid "branch renamed from %s to %s at %d\n"
msgstr ""
msgid "reparent to %s\n"
msgstr ""
msgid "copied to %s from %s@%s\n"
msgstr ""
msgid "gone from %s\n"
msgstr ""
msgid "found parent directory %s\n"
msgstr ""
msgid "base, entry %s %s\n"
msgstr ""
msgid "munge-o-matic\n"
msgstr ""
msgid "info: %s %s %s %s\n"
msgstr ""
msgid "unknown path in revision %d: %s\n"
msgstr ""
msgid "mark %s came from %s:%d\n"
msgstr ""
msgid "parsing revision %d (%d changes)\n"
msgstr ""
msgid "found parent of branch %s at %d: %s\n"
msgstr ""
msgid "no copyfrom path, don't know what to do.\n"
msgstr ""
msgid "fetching revision log for \"%s\" from %d to %d\n"
msgstr ""
msgid "skipping blacklisted revision %d\n"
msgstr ""
msgid "revision %d has no entries\n"
msgstr ""
msgid "svn: branch has no revision %s"
msgstr ""
msgid "%r is not under %r, ignoring\n"
msgstr ""
msgid "initializing svn repo %r\n"
msgstr ""
msgid "initializing svn wc %r\n"
msgstr ""
msgid "unexpected svn output:\n"
msgstr ""
msgid "unable to cope with svn output"
msgstr ""
msgid "XXX TAGS NOT IMPLEMENTED YET\n"
msgstr ""
msgid ""
"\n"
"The `extdiff' Mercurial extension allows you to use external programs\n"
"to compare revisions, or revision with working dir. The external diff\n"
"programs are called with a configurable set of options and two\n"
"non-option arguments: paths to directories containing snapshots of\n"
"files to compare.\n"
"\n"
"To enable this extension:\n"
"\n"
" [extensions]\n"
" hgext.extdiff =\n"
"\n"
"The `extdiff' extension also allows to configure new diff commands, so\n"
"you do not need to type \"hg extdiff -p kdiff3\" always.\n"
"\n"
" [extdiff]\n"
" # add new command that runs GNU diff(1) in 'context diff' mode\n"
" cdiff = gdiff -Nprc5\n"
" ## or the old way:\n"
" #cmd.cdiff = gdiff\n"
" #opts.cdiff = -Nprc5\n"
"\n"
" # add new command called vdiff, runs kdiff3\n"
" vdiff = kdiff3\n"
"\n"
" # add new command called meld, runs meld (no need to name twice)\n"
" meld =\n"
"\n"
" # add new command called vimdiff, runs gvimdiff with DirDiff plugin\n"
" #(see http://www.vim.org/scripts/script.php?script_id=102)\n"
" # Non english user, be sure to put \"let g:DirDiffDynamicDiffText = 1\" "
"in\n"
" # your .vimrc\n"
" vimdiff = gvim -f '+next' '+execute \"DirDiff\" argv(0) argv(1)'\n"
"\n"
"You can use -I/-X and list of file or directory names like normal\n"
"\"hg diff\" command. The `extdiff' extension makes snapshots of only\n"
"needed files, so running the external diff program will actually be\n"
"pretty fast (at least faster than having to compare the entire tree).\n"
msgstr ""
msgid "snapshot files as of some revision"
msgstr ""
msgid "making snapshot of %d files from rev %s\n"
msgstr ""
msgid ""
"snapshot files from working directory.\n"
" if not using snapshot, -I/-X does not work and recursive diff\n"
" in tools like kdiff3 and meld displays too many files."
msgstr ""
msgid "making snapshot of %d files from working dir\n"
msgstr ""
msgid ""
"Do the actuall diff:\n"
"\n"
" - copy to a temp structure if diffing 2 internal revisions\n"
" - copy to a temp structure if diffing working revision with\n"
" another one and more than 1 file is changed\n"
" - just invoke the diff for a single file in the working dir\n"
" "
msgstr ""
msgid "running %r in %s\n"
msgstr ""
msgid "file changed while diffing. Overwriting: %s (src: %s)\n"
msgstr ""
msgid "cleaning up temp directory\n"
msgstr ""
msgid ""
"use external program to diff repository (or selected files)\n"
"\n"
" Show differences between revisions for the specified files, using\n"
" an external program. The default program used is diff, with\n"
" default options \"-Npru\".\n"
"\n"
" To select a different program, use the -p option. The program\n"
" will be passed the names of two directories to compare. To pass\n"
" additional options to the program, use the -o option. These will\n"
" be passed before the names of the directories to compare.\n"
"\n"
" When two revision arguments are given, then changes are\n"
" shown between those revisions. If only one revision is\n"
" specified then that revision is compared to the working\n"
" directory, and, when no revisions are specified, the\n"
" working directory files are compared to its parent."
msgstr ""
msgid "comparison program to run"
msgstr ""
msgid "pass option to comparison program"
msgstr ""
msgid "hg extdiff [OPT]... [FILE]..."
msgstr ""
msgid "use closure to save diff command to use"
msgstr ""
msgid "hg %s [OPTION]... [FILE]..."
msgstr ""
msgid "pulling, updating and merging in one command"
msgstr ""
msgid ""
"pull changes from a remote repository, merge new changes if needed.\n"
"\n"
" This finds all changes from the repository at the specified path\n"
" or URL and adds them to the local repository.\n"
"\n"
" If the pulled changes add a new branch head, the head is automatically\n"
" merged, and the result of the merge is committed. Otherwise, the\n"
" working directory is updated to include the new changes.\n"
"\n"
" When a merge occurs, the newly pulled changes are assumed to be\n"
" \"authoritative\". The head of the new changes is used as the first\n"
" parent, with local changes as the second. To switch the merge\n"
" order, use --switch-parent.\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
" "
msgstr ""
msgid ""
"working dir not at branch tip (use \"hg update\" to check out branch tip)"
msgstr ""
msgid "outstanding uncommitted merge"
msgstr ""
msgid "outstanding uncommitted changes"
msgstr ""
msgid "working directory is missing some files"
msgstr "arbejdsbiblioteket mangler nogle filer"
msgid ""
"multiple heads in this branch (use \"hg heads .\" and \"hg merge\" to merge)"
msgstr ""
msgid "pulling from %s\n"
msgstr "hiver fra %s\n"
msgid "fetch -r doesn't work for remote repositories yet"
msgstr "fetch -r virker endnu ikke for fjernarkiver"
msgid ""
"not merging with %d other new branch heads (use \"hg heads .\" and \"hg merge"
"\" to merge them)\n"
msgstr ""
msgid "updating to %d:%s\n"
msgstr "opdaterer til %d:%s\n"
msgid "merging with %d:%s\n"
msgstr "sammenføjer med %d:%s\n"
msgid "Automated merge with %s"
msgstr ""
msgid "new changeset %d:%s merges remote changes with local\n"
msgstr ""
msgid "a specific revision you would like to pull"
msgstr ""
msgid "edit commit message"
msgstr ""
msgid "edit commit message (DEPRECATED)"
msgstr ""
msgid "switch parents when merging"
msgstr ""
msgid "hg fetch [SOURCE]"
msgstr ""
msgid " returns of the good and bad signatures"
msgstr ""
msgid "error while verifying signature"
msgstr ""
msgid "create a new gpg instance"
msgstr ""
msgid ""
"\n"
" walk over every sigs, yields a couple\n"
" ((node, version, sig), (filename, linenumber))\n"
" "
msgstr ""
msgid "get the keys who signed a data"
msgstr ""
msgid "%s Bad signature from \"%s\"\n"
msgstr ""
msgid "%s Note: Signature has expired (signed by: \"%s\")\n"
msgstr ""
msgid "%s Note: This key has expired (signed by: \"%s\")\n"
msgstr ""
msgid "list signed changesets"
msgstr ""
msgid "%s:%d node does not exist\n"
msgstr ""
msgid "verify all the signatures there may be for a particular revision"
msgstr ""
msgid "No valid signature for %s\n"
msgstr ""
msgid "associate a string to a key (username, comment)"
msgstr ""
msgid ""
"add a signature for the current or given revision\n"
"\n"
" If no revision is given, the parent of the working directory is used,\n"
" or tip if no revision is checked out.\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
" "
msgstr ""
msgid "uncommitted merge - please provide a specific revision"
msgstr ""
msgid "Error while signing"
msgstr ""
msgid ""
"working copy of .hgsigs is changed (please commit .hgsigs manually or use --"
"force)"
msgstr ""
msgid "Added signature for changeset %s"
msgstr ""
msgid "map a manifest into some text"
msgstr ""
msgid "unknown signature version"
msgstr ""
msgid "make the signature local"
msgstr ""
msgid "sign even if the sigfile is modified"
msgstr ""
msgid "do not commit the sigfile after signing"
msgstr ""
msgid "the key id to sign with"
msgstr ""
msgid "commit message"
msgstr ""
msgid "hg sign [OPTION]... [REVISION]..."
msgstr ""
msgid "hg sigcheck REVISION"
msgstr ""
msgid "hg sigs"
msgstr ""
msgid ""
"show revision graphs in terminal windows\n"
"\n"
"This extension adds a --graph option to the incoming, outgoing and log\n"
"commands. When this options is given, an ascii representation of the\n"
"revision graph is also shown.\n"
msgstr ""
msgid ""
"cset DAG generator yielding (rev, node, [parents]) tuples\n"
"\n"
" This generator function walks through the revision history from "
"revision\n"
" start to revision stop (which must be less than or equal to start).\n"
" "
msgstr ""
msgid ""
"file cset DAG generator yielding (rev, node, [parents]) tuples\n"
"\n"
" This generator function walks through the revision history of a single\n"
" file from revision start to revision stop (which must be less than or\n"
" equal to start).\n"
" "
msgstr ""
msgid ""
"grapher for asciigraph on a list of nodes and their parents\n"
"\n"
" nodes must generate tuples (node, parents, char, lines) where\n"
" - parents must generate the parents of node, in sorted order,\n"
" and max length 2,\n"
" - char is the char to print as the node symbol, and\n"
" - lines are the lines to display next to the node.\n"
" "
msgstr ""
msgid ""
"prints an ASCII graph of the DAG returned by the grapher\n"
"\n"
" grapher is a generator that emits tuples with the following elements:\n"
"\n"
" - Character to use as node's symbol.\n"
" - List of lines to display as the node's text.\n"
" - Column of the current node in the set of ongoing edges.\n"
" - Edges; a list of (col, next_col) indicating the edges between\n"
" the current node and its parents.\n"
" - Number of columns (ongoing edges) in the current revision.\n"
" - The difference between the number of columns (ongoing edges)\n"
" in the next revision and the number of columns (ongoing edges)\n"
" in the current revision. That is: -1 means one column removed;\n"
" 0 means no columns added or removed; 1 means one column added.\n"
" "
msgstr ""
msgid "limit must be a positive integer"
msgstr ""
msgid "limit must be positive"
msgstr ""
msgid "--graph option is incompatible with --%s"
msgstr ""
msgid ""
"show revision history alongside an ASCII revision graph\n"
"\n"
" Print a revision history alongside a revision graph drawn with\n"
" ASCII characters.\n"
"\n"
" Nodes printed as an @ character are parents of the working\n"
" directory.\n"
" "
msgstr ""
msgid ""
"cset DAG generator yielding (node, [parents]) tuples\n"
"\n"
" This generator function walks through the revisions not found\n"
" in the destination\n"
" "
msgstr ""
msgid "comparing with %s\n"
msgstr "sammenligner med %s\n"
msgid "no changes found\n"
msgstr "fandt ingen ændringer\n"
msgid ""
"show the outgoing changesets alongside an ASCII revision graph\n"
"\n"
" Print the outgoing changesets alongside a revision graph drawn with\n"
" ASCII characters.\n"
"\n"
" Nodes printed as an @ character are parents of the working\n"
" directory.\n"
" "
msgstr ""
msgid ""
"cset DAG generator yielding (node, [parents]) tuples\n"
"\n"
" This generator function walks through the revisions of the destination\n"
" not found in repo\n"
" "
msgstr ""
msgid ""
"show the incoming changesets alongside an ASCII revision graph\n"
"\n"
" Print the incoming changesets alongside a revision graph drawn with\n"
" ASCII characters.\n"
"\n"
" Nodes printed as an @ character are parents of the working\n"
" directory.\n"
" "
msgstr ""
msgid "wrap the command"
msgstr ""
msgid "show the revision DAG"
msgstr ""
msgid "limit number of changes displayed"
msgstr ""
msgid "show patch"
msgstr ""
msgid "show the specified revision or range"
msgstr ""
msgid "hg glog [OPTION]... [FILE]"
msgstr ""
msgid ""
"CIA notification\n"
"\n"
"This is meant to be run as a changegroup or incoming hook.\n"
"To configure it, set the following options in your hgrc:\n"
"\n"
"[cia]\n"
"# your registered CIA user name\n"
"user = foo\n"
"# the name of the project in CIA\n"
"project = foo\n"
"# the module (subproject) (optional)\n"
"#module = foo\n"
"# Append a diffstat to the log message (optional)\n"
"#diffstat = False\n"
"# Template to use for log messages (optional)\n"
"#template = {desc}\n"
"{baseurl}/rev/{node}-- {diffstat}\n"
"# Style to use (optional)\n"
"#style = foo\n"
"# The URL of the CIA notification service (optional)\n"
"# You can use mailto: URLs to send by email, eg\n"
"# mailto:cia@cia.vc\n"
"# Make sure to set email.from if you do this.\n"
"#url = http://cia.vc/\n"
"# print message instead of sending it (optional)\n"
"#test = False\n"
"\n"
"[hooks]\n"
"# one of these:\n"
"changegroup.cia = python:hgcia.hook\n"
"#incoming.cia = python:hgcia.hook\n"
"\n"
"[web]\n"
"# If you want hyperlinks (optional)\n"
"baseurl = http://server/path/to/repo\n"
msgstr ""
msgid " A CIA message "
msgstr ""
msgid " CIA notification class "
msgstr ""
msgid "hgcia: sending update to %s\n"
msgstr ""
msgid " send CIA notification "
msgstr ""
msgid "email.from must be defined when sending by email"
msgstr ""
msgid "cia: no user specified"
msgstr "cia: ingen bruger angivet"
msgid "cia: no project specified"
msgstr "cia: intet project angivet"
msgid ""
"browsing the repository in a graphical way\n"
"\n"
"The hgk extension allows browsing the history of a repository in a\n"
"graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is\n"
"not distributed with Mercurial.)\n"
"\n"
"hgk consists of two parts: a Tcl script that does the displaying and\n"
"querying of information, and an extension to mercurial named hgk.py,\n"
"which provides hooks for hgk to get information. hgk can be found in\n"
"the contrib directory, and hgk.py can be found in the hgext directory.\n"
"\n"
"To load the hgext.py extension, add it to your .hgrc file (you have\n"
"to use your global $HOME/.hgrc file, not one in a repository). You\n"
"can specify an absolute path:\n"
"\n"
" [extensions]\n"
" hgk=/usr/local/lib/hgk.py\n"
"\n"
"Mercurial can also scan the default python library path for a file\n"
"named 'hgk.py' if you set hgk empty:\n"
"\n"
" [extensions]\n"
" hgk=\n"
"\n"
"The hg view command will launch the hgk Tcl script. For this command\n"
"to work, hgk must be in your search path. Alternately, you can\n"
"specify the path to hgk in your .hgrc file:\n"
"\n"
" [hgk]\n"
" path=/location/of/hgk\n"
"\n"
"hgk can make use of the extdiff extension to visualize revisions.\n"
"Assuming you had already configured extdiff vdiff command, just add:\n"
"\n"
" [hgk]\n"
" vdiff=vdiff\n"
"\n"
"Revisions context menu will now display additional entries to fire\n"
"vdiff on hovered and selected revisions."
msgstr ""
msgid "diff trees from two commits"
msgstr ""
msgid "output common ancestor information"
msgstr ""
msgid "cat a specific revision"
msgstr ""
msgid "cat-file: type or revision not supplied\n"
msgstr ""
msgid "aborting hg cat-file only understands commits\n"
msgstr ""
msgid "parse given revisions"
msgstr ""
msgid "print revisions"
msgstr ""
msgid "print extension options"
msgstr ""
msgid "start interactive history viewer"
msgstr ""
msgid "hg view [-l LIMIT] [REVRANGE]"
msgstr ""
msgid "generate patch"
msgstr ""
msgid "recursive"
msgstr ""
msgid "pretty"
msgstr ""
msgid "stdin"
msgstr ""
msgid "detect copies"
msgstr ""
msgid "search"
msgstr "søg"
msgid "hg git-diff-tree [OPTION]... NODE1 NODE2 [FILE]..."
msgstr ""
msgid "hg debug-cat-file [OPTION]... TYPE FILE"
msgstr ""
msgid "hg debug-config"
msgstr ""
msgid "hg debug-merge-base node node"
msgstr ""
msgid "ignored"
msgstr "Ignoreret"
msgid "hg debug-rev-parse REV"
msgstr ""
msgid "header"
msgstr ""
msgid "topo-order"
msgstr ""
msgid "parents"
msgstr ""
msgid "max-count"
msgstr ""
msgid "hg debug-rev-list [options] revs"
msgstr ""
msgid ""
"syntax highlighting in hgweb, based on Pygments\n"
"\n"
"It depends on the pygments syntax highlighting library:\n"
"http://pygments.org/\n"
"\n"
"To enable the extension add this to hgrc:\n"
"\n"
"[extensions]\n"
"hgext.highlight =\n"
"\n"
"There is a single configuration option:\n"
"\n"
"[web]\n"
"pygments_style = <style>\n"
"\n"
"The default is 'colorful'.\n"
"\n"
"-- Adam Hupp <adam@hupp.org>\n"
msgstr ""
msgid "inotify-based status acceleration for Linux systems\n"
msgstr ""
msgid "start an inotify server for this repository"
msgstr ""
msgid "(found dead inotify server socket; removing it)\n"
msgstr ""
msgid "(starting inotify server)\n"
msgstr ""
msgid "could not start inotify server: %s\n"
msgstr ""
msgid "could not talk to new inotify server: %s\n"
msgstr ""
msgid "(inotify server not running)\n"
msgstr ""
msgid "failed to contact inotify server: %s\n"
msgstr ""
msgid "run server in background"
msgstr ""
msgid "used internally by daemon mode"
msgstr ""
msgid "minutes to sit idle before exiting"
msgstr ""
msgid "name of file to write process ID to"
msgstr ""
msgid "hg inserve [OPT]..."
msgstr ""
msgid "(inotify: received response from incompatible server version %d)\n"
msgstr ""
msgid "this system does not seem to support inotify"
msgstr ""
msgid "*** the current per-user limit on the number of inotify watches is %s\n"
msgstr ""
msgid "*** this limit is too low to watch every directory in this repository\n"
msgstr ""
msgid "*** counting directories: "
msgstr ""
msgid "found %d\n"
msgstr ""
msgid "*** to raise the limit from %d to %d (run as root):\n"
msgstr ""
msgid "*** echo %d > %s\n"
msgstr ""
msgid "cannot watch %s until inotify watch limit is raised"
msgstr ""
msgid "inotify service not available: %s"
msgstr ""
msgid "watching %r\n"
msgstr ""
msgid "watching directories under %r\n"
msgstr ""
msgid "status: %r dir(%d) -> %s\n"
msgstr ""
msgid "status: %r %s -> %s\n"
msgstr ""
msgid "%s dirstate reload\n"
msgstr ""
msgid "%s end dirstate reload\n"
msgstr ""
msgid "rescanning due to .hgignore change\n"
msgstr ""
msgid "%s event: created %s\n"
msgstr ""
msgid "%s event: deleted %s\n"
msgstr ""
msgid "%s event: modified %s\n"
msgstr ""
msgid "filesystem containing %s was unmounted\n"
msgstr ""
msgid "%s readable: %d bytes\n"
msgstr ""
msgid "%s below threshold - unhooking\n"
msgstr ""
msgid "%s reading %d events\n"
msgstr ""
msgid "%s hooking back up with %d bytes readable\n"
msgstr ""
msgid "%s processing %d deferred events as %d\n"
msgstr ""
msgid "could not start server: %s"
msgstr ""
msgid "received query from incompatible client version %d\n"
msgstr ""
msgid "answering query for %r\n"
msgstr ""
msgid "finished setup\n"
msgstr ""
msgid "polling: no timeout\n"
msgstr ""
msgid "polling: %sms timeout\n"
msgstr ""
msgid "interhg: invalid pattern for %s: %s\n"
msgstr ""
msgid "interhg: invalid regexp for %s: %s\n"
msgstr ""
msgid ""
"keyword expansion in local repositories\n"
"\n"
"This extension expands RCS/CVS-like or self-customized $Keywords$\n"
"in tracked text files selected by your configuration.\n"
"\n"
"Keywords are only expanded in local repositories and not stored in\n"
"the change history. The mechanism can be regarded as a convenience\n"
"for the current user or for archive distribution.\n"
"\n"
"Configuration is done in the [keyword] and [keywordmaps] sections\n"
"of hgrc files.\n"
"\n"
"Example:\n"
"\n"
" [keyword]\n"
" # expand keywords in every python file except those matching \"x*\"\n"
" **.py =\n"
" x* = ignore\n"
"\n"
"Note: the more specific you are in your filename patterns\n"
" the less you lose speed in huge repos.\n"
"\n"
"For [keywordmaps] template mapping and expansion demonstration and\n"
"control run \"hg kwdemo\".\n"
"\n"
"An additional date template filter {date|utcdate} is provided.\n"
"\n"
"The default template mappings (view with \"hg kwdemo -d\") can be replaced\n"
"with customized keywords and templates.\n"
"Again, run \"hg kwdemo\" to control the results of your config changes.\n"
"\n"
"Before changing/disabling active keywords, run \"hg kwshrink\" to avoid\n"
"the risk of inadvertedly storing expanded keywords in the change history.\n"
"\n"
"To force expansion after enabling it, or a configuration change, run\n"
"\"hg kwexpand\".\n"
"\n"
"Also, when committing with the record extension or using mq's qrecord, be "
"aware\n"
"that keywords cannot be updated. Again, run \"hg kwexpand\" on the files in\n"
"question to update keyword expansions after all changes have been checked "
"in.\n"
"\n"
"Expansions spanning more than one line and incremental expansions,\n"
"like CVS' $Log$, are not supported. A keyword template map\n"
"\"Log = {desc}\" expands to the first line of the changeset description.\n"
msgstr ""
msgid "Returns hgdate in cvs-like UTC format."
msgstr ""
msgid ""
"\n"
" Sets up keyword templates, corresponding keyword regex, and\n"
" provides keyword substitution functions.\n"
" "
msgstr ""
msgid "Replaces keywords in data with expanded template."
msgstr ""
msgid "Returns data with keywords expanded."
msgstr ""
msgid ""
"Returns true if path matches [keyword] pattern\n"
" and is not a symbolic link.\n"
" Caveat: localrepository._link fails on Windows."
msgstr ""
msgid "Overwrites selected files expanding/shrinking keywords."
msgstr ""
msgid "overwriting %s %s keywords\n"
msgstr ""
msgid "Unconditionally removes all keyword substitutions from text."
msgstr ""
msgid "Returns text with all keyword substitutions removed."
msgstr ""
msgid "Returns lines with keyword substitutions removed."
msgstr ""
msgid ""
"If in restricted mode returns data read from wdir with\n"
" keyword substitutions removed."
msgstr ""
msgid ""
"\n"
" Subclass of filelog to hook into its read, add, cmp methods.\n"
" Keywords are \"stored\" unexpanded, and processed on reading.\n"
" "
msgstr ""
msgid "Expands keywords when reading filelog."
msgstr ""
msgid "Removes keyword substitutions when adding to filelog."
msgstr ""
msgid "Removes keyword substitutions for comparison."
msgstr ""
msgid ""
"Bails out if [keyword] configuration is not active.\n"
" Returns status of working directory."
msgstr ""
msgid "[keyword] patterns cannot match"
msgstr ""
msgid "no [keyword] patterns configured"
msgstr ""
msgid "Selects files and passes them to kwtemplater.overwrite."
msgstr ""
msgid ""
"print [keywordmaps] configuration and an expansion example\n"
"\n"
" Show current, custom, or default keyword template maps\n"
" and their expansion.\n"
"\n"
" Extend current configuration by specifying maps as arguments\n"
" and optionally by reading from an additional hgrc file.\n"
"\n"
" Override current keyword template maps with \"default\" option.\n"
" "
msgstr ""
msgid ""
"\n"
"\t%s\n"
msgstr ""
msgid "creating temporary repo at %s\n"
msgstr ""
msgid ""
"\n"
"%s keywords written to %s:\n"
msgstr ""
msgid "unhooked all commit hooks\n"
msgstr ""
msgid ""
"\n"
"removing temporary repo %s\n"
msgstr ""
msgid ""
"expand keywords in working directory\n"
"\n"
" Run after (re)enabling keyword expansion.\n"
"\n"
" kwexpand refuses to run if given files contain local changes.\n"
" "
msgstr ""
msgid ""
"print files currently configured for keyword expansion\n"
"\n"
" Crosscheck which files in working directory are potential targets for\n"
" keyword expansion.\n"
" That is, files matched by [keyword] config patterns but not symlinks.\n"
" "
msgstr ""
msgid ""
"revert expanded keywords in working directory\n"
"\n"
" Run before changing/disabling active keywords\n"
" or if you experience problems with \"hg import\" or \"hg merge\".\n"
"\n"
" kwshrink refuses to run if given files contain local changes.\n"
" "
msgstr ""
msgid ""
"Collects [keyword] config in kwtools.\n"
" Monkeypatches dispatch._parse if needed."
msgstr ""
msgid "Monkeypatch dispatch._parse to obtain running hg command."
msgstr ""
msgid ""
"Sets up repo as kwrepo for keyword substitution.\n"
" Overrides file method to return kwfilelog instead of filelog\n"
" if file matches user configuration.\n"
" Wraps commit to overwrite configured files with updated\n"
" keyword substitutions.\n"
" Monkeypatches patch and webcommands."
msgstr ""
msgid ""
"Monkeypatch/wrap patch.patchfile.__init__ to avoid\n"
" rejects or conflicts due to expanded keywords in working dir."
msgstr ""
msgid ""
"Monkeypatch patch.diff to avoid expansion except when\n"
" comparing against working dir."
msgstr ""
msgid "Wraps webcommands.x turning off keyword expansion."
msgstr ""
msgid "show default keyword template maps"
msgstr ""
msgid "read maps from rcfile"
msgstr ""
msgid "hg kwdemo [-d] [-f RCFILE] [TEMPLATEMAP]..."
msgstr ""
msgid "hg kwexpand [OPTION]... [FILE]..."
msgstr ""
msgid "show keyword status flags of all files"
msgstr ""
msgid "show files excluded from expansion"
msgstr ""
msgid "additionally show untracked files"
msgstr ""
msgid "hg kwfiles [OPTION]... [FILE]..."
msgstr ""
msgid "hg kwshrink [OPTION]... [FILE]..."
msgstr ""
msgid ""
"patch management and development\n"
"\n"
"This extension lets you work with a stack of patches in a Mercurial\n"
"repository. It manages two stacks of patches - all known patches, and\n"
"applied patches (subset of known patches).\n"
"\n"
"Known patches are represented as patch files in the .hg/patches\n"
"directory. Applied patches are both patch files and changesets.\n"
"\n"
"Common tasks (use \"hg help command\" for more details):\n"
"\n"
"prepare repository to work with patches qinit\n"
"create new patch qnew\n"
"import existing patch qimport\n"
"\n"
"print patch series qseries\n"
"print applied patches qapplied\n"
"print name of top applied patch qtop\n"
"\n"
"add known patch to applied stack qpush\n"
"remove patch from applied stack qpop\n"
"refresh contents of top applied patch qrefresh\n"
msgstr ""
"udvikling og håndtering af patches\n"
"\n"
"Denne udvidelse lader dig arbejde med en stak af patches i et\n"
"Mercurial repository. Den håndterer to stakke af patches - alle kendte\n"
"patches og alle anvendte patches (en delmængde af de kendte patches).\n"
"\n"
"Kendte patches er repræsenteret som patch-filer i .hg/patches\n"
"biblioteket. Anvendte patches er både patch-filer og Mercurial\n"
"ændringer.\n"
"\n"
"Almindelige opgaver (brug \"hg help kommado\" for flere detaljer):\n"
"\n"
"forbered repository til at arbejde med patches qinit\n"
"opret ny patch qnew\n"
"importer eksisterende patch qimport\n"
"\n"
"list patch-serien qseries\n"
"list anvendte patches qapplied\n"
"list navnet på den øverste patch qtop\n"
"\n"
"anvend og put patch på stakken qpush\n"
"fjern patch fra stakken qpop\n"
"genopfrisk indholdet af den øverste patch qrefresh\n"
msgid ""
"Update all references to a field in the patch header.\n"
" If none found, add it email style."
msgstr ""
msgid ""
"Remove existing message, keeping the rest of the comments fields.\n"
" If comments contains 'subject: ', message will prepend\n"
" the field and a blank line."
msgstr ""
msgid "%s appears more than once in %s"
msgstr "%s findes mere end én gang i %s"
msgid "guard cannot be an empty string"
msgstr ""
msgid "guard %r starts with invalid character: %r"
msgstr ""
msgid "invalid character in guard %r: %r"
msgstr ""
msgid "active guards: %s\n"
msgstr ""
msgid "guard %r too short"
msgstr ""
msgid "guard %r starts with invalid char"
msgstr ""
msgid "allowing %s - no guards in effect\n"
msgstr ""
msgid "allowing %s - no matching negative guards\n"
msgstr ""
msgid "allowing %s - guarded by %r\n"
msgstr ""
msgid "skipping %s - guarded by %r\n"
msgstr ""
msgid "skipping %s - no matching guards\n"
msgstr ""
msgid "error removing undo: %s\n"
msgstr ""
msgid "apply failed for patch %s"
msgstr ""
msgid "patch didn't work out, merging %s\n"
msgstr ""
msgid "update returned %d"
msgstr ""
msgid "repo commit failed"
msgstr ""
msgid "unable to read %s"
msgstr "ikke i stand til at læse %s"
msgid "patch %s does not exist\n"
msgstr "rettelsen %s findes ikke\n"
msgid "patch %s is not applied\n"
msgstr "rettelsen %s er ikke anvendt\n"
msgid ""
"Apply patchfile to the working directory.\n"
" patchfile: file name of patch"
msgstr ""
msgid "patch failed, unable to continue (try -v)\n"
msgstr ""
msgid "applying %s\n"
msgstr "anvender %s\n"
msgid "Unable to read %s\n"
msgstr ""
msgid "imported patch %s\n"
msgstr "importeret rettelse %s\n"
msgid ""
"\n"
"imported patch %s"
msgstr ""
"\n"
"importeret rettelse %s"
msgid "patch %s is empty\n"
msgstr "rettelse %s er tom\n"
msgid "patch failed, rejects left in working dir\n"
msgstr ""
msgid "fuzz found when applying patch, stopping\n"
msgstr ""
msgid "revision %d is not managed"
msgstr ""
msgid "cannot delete revision %d above applied patches"
msgstr "kan ikke slette revision %d ovenover anvendte rettelser"
msgid "qdelete requires at least one revision or patch name"
msgstr ""
msgid "cannot delete applied patch %s"
msgstr "kan ikke slette den anvendte rettelse %s"
msgid "patch %s not in series file"
msgstr "rettelse %s er ikke i series filen"
msgid "no patches applied"
msgstr "ingen rettelser anvendt"
msgid "working directory revision is not qtip"
msgstr ""
msgid "local changes found, refresh first"
msgstr "lokale ændringer fundet, genopfrisk først"
msgid "local changes found"
msgstr "lokale ændringer fundet"
msgid "\"%s\" cannot be used as the name of a patch"
msgstr "\"%s\" kan ikke bruges som navnet på en rettelse"
msgid ""
"options:\n"
" msg: a string or a no-argument function returning a string\n"
" "
msgstr ""
msgid "patch \"%s\" already exists"
msgstr "rettelsen \"%s\" findes allerede"
msgid "error unlinking %s\n"
msgstr "fejl ved sletning af %s\n"
msgid "returns (index, rev, patch)"
msgstr ""
msgid "patch name \"%s\" is ambiguous:\n"
msgstr "rettelsen \"%s\" er tvetydigt:\n"
msgid "patch %s not in series"
msgstr ""
msgid "(working directory not at tip)\n"
msgstr ""
msgid "no patches in series\n"
msgstr "ingen patches i serien\n"
msgid "cannot push to a previous patch: %s"
msgstr ""
msgid "qpush: %s is already at the top\n"
msgstr ""
msgid "guarded by %r"
msgstr ""
msgid "no matching guards"
msgstr ""
msgid "cannot push '%s' - %s\n"
msgstr "kan ikke skubbe '%s' - %s\n"
msgid "all patches are currently applied\n"
msgstr "alle rettelser er i øjeblikket anvendt\n"
msgid "patch series already fully applied\n"
msgstr ""
msgid "cleaning up working directory..."
msgstr "rydder op i arbejdsbiblioteket..."
msgid "errors during apply, please fix and refresh %s\n"
msgstr ""
#, fuzzy
msgid "now at: %s\n"
msgstr "Nu ved: %s\n"
msgid "patch %s is not applied"
msgstr "rettelse %s er ikke anvendt"
msgid "no patches applied\n"
msgstr "ingen rettelser anvendt\n"
msgid "qpop: %s is already at the top\n"
msgstr ""
msgid "qpop: forcing dirstate update\n"
msgstr ""
msgid "trying to pop unknown node %s"
msgstr ""
msgid "popping would remove a revision not managed by this patch queue"
msgstr ""
msgid "deletions found between repo revs"
msgstr ""
#, fuzzy
msgid "patch queue now empty\n"
msgstr "rettelse %s er tom\n"
msgid "cannot refresh a revision with children"
msgstr ""
msgid ""
"refresh interrupted while patch was popped! (revert --all, qpush to "
"recover)\n"
msgstr ""
msgid "patch queue directory already exists"
msgstr ""
msgid "patch %s is not in series file"
msgstr "rettelse %s er ikke i series filen"
msgid "No saved patch data found\n"
msgstr ""
msgid "restoring status: %s\n"
msgstr "genopretter status: %s\n"
msgid "save entry has children, leaving it alone\n"
msgstr ""
msgid "removing save entry %s\n"
msgstr ""
msgid "saved queue repository parents: %s %s\n"
msgstr ""
msgid "queue directory updating\n"
msgstr ""
msgid "Unable to load queue repository\n"
msgstr ""
msgid "save: no patches applied, exiting\n"
msgstr ""
msgid "status is already saved\n"
msgstr ""
msgid "hg patches saved state"
msgstr ""
msgid "repo commit failed\n"
msgstr ""
msgid ""
"If all_patches is False, return the index of the next pushable patch\n"
" in the series, or the series length. If all_patches is True, return "
"the\n"
" index of the first patch past the last applied one.\n"
" "
msgstr ""
msgid "patch %s is already in the series file"
msgstr ""
msgid "option \"-r\" not valid when importing files"
msgstr ""
msgid "option \"-n\" not valid when importing multiple patches"
msgstr ""
msgid "revision %d is the root of more than one branch"
msgstr ""
msgid "revision %d is already managed"
msgstr ""
msgid "revision %d is not the parent of the queue"
msgstr ""
msgid "revision %d has unmanaged children"
msgstr ""
msgid "cannot import merge revision %d"
msgstr ""
msgid "revision %d is not the parent of %d"
msgstr ""
msgid "-e is incompatible with import from -"
msgstr ""
msgid "patch %s does not exist"
msgstr "rettelse %s eksisterer ikke"
msgid "need --name to import a patch from -"
msgstr ""
msgid "adding %s to series file\n"
msgstr "tilføjer %s til series filen\n"
msgid ""
"remove patches from queue\n"
"\n"
" The patches must not be applied, unless they are arguments to\n"
" the --rev parameter. At least one patch or revision is required.\n"
"\n"
" With --rev, mq will stop managing the named revisions (converting\n"
" them to regular mercurial changesets). The qfinish command should be\n"
" used as an alternative for qdel -r, as the latter option is deprecated.\n"
"\n"
" With --keep, the patch files are preserved in the patch directory."
msgstr ""
msgid "print the patches already applied"
msgstr "udskriver rettelserne som allerede er anvendt"
msgid "print the patches not yet applied"
msgstr "udskriver rettelserne som ikke er anvendt endnu"
msgid ""
"import a patch\n"
"\n"
" The patch is inserted into the series after the last applied patch.\n"
" If no patches have been applied, qimport prepends the patch\n"
" to the series.\n"
"\n"
" The patch will have the same name as its source file unless you\n"
" give it a new one with --name.\n"
"\n"
" You can register an existing patch inside the patch directory\n"
" with the --existing flag.\n"
"\n"
" With --force, an existing patch of the same name will be overwritten.\n"
"\n"
" An existing changeset may be placed under mq control with --rev\n"
" (e.g. qimport --rev tip -n patch will place tip under mq control).\n"
" With --git, patches imported with --rev will use the git diff\n"
" format. See the diffs help topic for information on why this is\n"
" important for preserving rename/copy information and permission "
"changes.\n"
" "
msgstr ""
msgid ""
"init a new queue repository\n"
"\n"
" The queue repository is unversioned by default. If -c is\n"
" specified, qinit will create a separate nested repository\n"
" for patches (qinit -c may also be run later to convert\n"
" an unversioned patch repository into a versioned one).\n"
" You can use qcommit to commit changes to this queue repository."
msgstr ""
msgid ""
"clone main and patch repository at same time\n"
"\n"
" If source is local, destination will have no patches applied. If\n"
" source is remote, this command can not check if patches are\n"
" applied in source, so cannot guarantee that patches are not\n"
" applied in destination. If you clone remote repository, be sure\n"
" before that it has no patches applied.\n"
"\n"
" Source patch repository is looked for in <src>/.hg/patches by\n"
" default. Use -p <url> to change.\n"
"\n"
" The patch directory must be a nested mercurial repository, as\n"
" would be created by qinit -c.\n"
" "
msgstr ""
msgid "versioned patch repository not found (see qinit -c)"
msgstr "versionsstyret arkiv til rettelser blev ikke fundet (se qinit -c)"
msgid "cloning main repo\n"
msgstr "kloner hovedarkiv\n"
msgid "cloning patch repo\n"
msgstr "kloner rettelsesarkiv\n"
msgid "stripping applied patches from destination repo\n"
msgstr ""
msgid "updating destination repo\n"
msgstr ""
msgid "commit changes in the queue repository"
msgstr ""
msgid "print the entire series file"
msgstr "udskriver hele series filen"
msgid "print the name of the current patch"
msgstr "udskriver navnet på den nuværende rettelse"
msgid "print the name of the next patch"
msgstr "udskriver navnet på den næste rettelse"
#, fuzzy
msgid "all patches applied\n"
msgstr "Alle patches er anvendt\n"
msgid "print the name of the previous patch"
msgstr "udskriver navnet på den forgående rettelse"
#, fuzzy
msgid "only one patch applied\n"
msgstr "Kun én patch anvendt\n"
msgid ""
"create a new patch\n"
"\n"
" qnew creates a new patch on top of the currently-applied patch (if "
"any).\n"
" It will refuse to run if there are any outstanding changes unless -f is\n"
" specified, in which case the patch will be initialized with them. You\n"
" may also use -I, -X, and/or a list of files after the patch name to add\n"
" only changes to matching files to the new patch, leaving the rest as\n"
" uncommitted modifications.\n"
"\n"
" -u and -d can be used to set the (given) user and date, respectively.\n"
" -U and -D set user to current user and date to current date.\n"
"\n"
" -e, -m or -l set the patch header as well as the commit message. If "
"none\n"
" is specified, the header is empty and the commit message is '[mq]: "
"PATCH'.\n"
"\n"
" Use the --git option to keep the patch in the git extended diff\n"
" format. Read the diffs help topic for more information on why this\n"
" is important for preserving permission changes and copy/rename\n"
" information.\n"
" "
msgstr ""
msgid ""
"update the current patch\n"
"\n"
" If any file patterns are provided, the refreshed patch will contain "
"only\n"
" the modifications that match those patterns; the remaining "
"modifications\n"
" will remain in the working directory.\n"
"\n"
" If --short is specified, files currently included in the patch will\n"
" be refreshed just like matched files and remain in the patch.\n"
"\n"
" hg add/remove/copy/rename work as usual, though you might want to use\n"
" git-style patches (--git or [diff] git=1) to track copies and renames.\n"
" See the diffs help topic for more information on the git diff format.\n"
" "
msgstr ""
msgid "option \"-e\" incompatible with \"-m\" or \"-l\""
msgstr ""
msgid ""
"diff of the current patch and subsequent modifications\n"
"\n"
" Shows a diff which includes the current patch as well as any changes "
"which\n"
" have been made in the working directory since the last refresh (thus\n"
" showing what the current patch would become after a qrefresh).\n"
"\n"
" Use 'hg diff' if you only want to see the changes made since the last\n"
" qrefresh, or 'hg export qtip' if you want to see changes made by the\n"
" current patch without including changes made since the qrefresh.\n"
" "
msgstr ""
msgid ""
"fold the named patches into the current patch\n"
"\n"
" Patches must not yet be applied. Each patch will be successively\n"
" applied to the current patch in the order given. If all the\n"
" patches apply successfully, the current patch will be refreshed\n"
" with the new cumulative patch, and the folded patches will\n"
" be deleted. With -k/--keep, the folded patch files will not\n"
" be removed afterwards.\n"
"\n"
" The header for each folded patch will be concatenated with\n"
" the current patch header, separated by a line of '* * *'."
msgstr ""
msgid "qfold requires at least one patch name"
msgstr ""
msgid "No patches applied"
msgstr "Ingen rettelser anvendt"
msgid "Skipping already folded patch %s"
msgstr ""
msgid "qfold cannot fold already applied patch %s"
msgstr ""
msgid "Error folding patch %s"
msgstr ""
msgid "push or pop patches until named patch is at top of stack"
msgstr ""
msgid ""
"set or print guards for a patch\n"
"\n"
" Guards control whether a patch can be pushed. A patch with no\n"
" guards is always pushed. A patch with a positive guard (\"+foo\") is\n"
" pushed only if the qselect command has activated it. A patch with\n"
" a negative guard (\"-foo\") is never pushed if the qselect command\n"
" has activated it.\n"
"\n"
" With no arguments, print the currently active guards.\n"
" With arguments, set guards for the named patch.\n"
"\n"
" To set a negative guard \"-foo\" on topmost patch (\"--\" is needed so\n"
" hg will not interpret \"-foo\" as an option):\n"
" hg qguard -- -foo\n"
"\n"
" To set guards on another patch:\n"
" hg qguard other.patch +2.6.17 -stable\n"
" "
msgstr ""
msgid "cannot mix -l/--list with options or arguments"
msgstr ""
msgid "no patch to work with"
msgstr ""
msgid "no patch named %s"
msgstr "ingen patch ved navn %s"
msgid "print the header of the topmost or specified patch"
msgstr ""
msgid ""
"push the next patch onto the stack\n"
"\n"
" When --force is applied, all local changes in patched files will be "
"lost.\n"
" "
msgstr ""
msgid "no saved queues found, please use -n\n"
msgstr ""
msgid "merging with queue at: %s\n"
msgstr ""
msgid ""
"pop the current patch off the stack\n"
"\n"
" By default, pops off the top of the patch stack. If given a patch name,\n"
" keeps popping off patches until the named patch is at the top of the "
"stack.\n"
" "
msgstr ""
msgid "using patch queue: %s\n"
msgstr ""
msgid ""
"rename a patch\n"
"\n"
" With one argument, renames the current patch to PATCH1.\n"
" With two arguments, renames PATCH1 to PATCH2."
msgstr ""
msgid "%s already exists"
msgstr "%s eksisterer allerede"
msgid "A patch named %s already exists in the series file"
msgstr ""
msgid "restore the queue state saved by a rev"
msgstr ""
msgid "save current queue state"
msgstr ""
msgid "destination %s exists and is not a directory"
msgstr ""
msgid "destination %s exists, use -f to force"
msgstr ""
msgid "copy %s to %s\n"
msgstr ""
msgid ""
"strip a revision and all its descendants from the repository\n"
"\n"
" If one of the working dir's parent revisions is stripped, the working\n"
" directory will be updated to the parent of the stripped revision.\n"
" "
msgstr ""
msgid ""
"set or print guarded patches to push\n"
"\n"
" Use the qguard command to set or print guards on patch, then use\n"
" qselect to tell mq which guards to use. A patch will be pushed if it\n"
" has no guards or any positive guards match the currently selected "
"guard,\n"
" but will not be pushed if any negative guards match the current guard.\n"
" For example:\n"
"\n"
" qguard foo.patch -stable (negative guard)\n"
" qguard bar.patch +stable (positive guard)\n"
" qselect stable\n"
"\n"
" This activates the \"stable\" guard. mq will skip foo.patch (because\n"
" it has a negative match) but push bar.patch (because it\n"
" has a positive match).\n"
"\n"
" With no arguments, prints the currently active guards.\n"
" With one argument, sets the active guard.\n"
"\n"
" Use -n/--none to deactivate guards (no other arguments needed).\n"
" When no guards are active, patches with positive guards are skipped\n"
" and patches with negative guards are pushed.\n"
"\n"
" qselect can change the guards on applied patches. It does not pop\n"
" guarded patches by default. Use --pop to pop back to the last applied\n"
" patch that is not guarded. Use --reapply (which implies --pop) to push\n"
" back to the current patch afterwards, but skip guarded patches.\n"
"\n"
" Use -s/--series to print a list of all guards in the series file (no\n"
" other arguments needed). Use -v for more information."
msgstr ""
msgid "guards deactivated\n"
msgstr ""
msgid "number of unguarded, unapplied patches has changed from %d to %d\n"
msgstr ""
msgid "number of guarded, applied patches has changed from %d to %d\n"
msgstr ""
msgid "guards in series file:\n"
msgstr ""
msgid "no guards in series file\n"
msgstr ""
msgid "active guards:\n"
msgstr ""
msgid "no active guards\n"
msgstr ""
msgid "popping guarded patches\n"
msgstr ""
msgid "reapplying unguarded patches\n"
msgstr ""
msgid ""
"move applied patches into repository history\n"
"\n"
" Finishes the specified revisions (corresponding to applied patches) by\n"
" moving them out of mq control into regular repository history.\n"
"\n"
" Accepts a revision range or the --applied option. If --applied is\n"
" specified, all applied mq revisions are removed from mq control.\n"
" Otherwise, the given revisions must be at the base of the stack of\n"
" applied patches.\n"
"\n"
" This can be especially useful if your changes have been applied to an\n"
" upstream repository, or if you are about to push your changes to "
"upstream.\n"
" "
msgstr ""
msgid "no revisions specified"
msgstr ""
msgid "cannot commit over an applied mq patch"
msgstr ""
msgid "source has mq patches applied"
msgstr ""
msgid "mq status file refers to unknown node %s\n"
msgstr ""
msgid "Tag %s overrides mq patch of the same name\n"
msgstr ""
msgid "cannot import over an applied patch"
msgstr ""
msgid "print first line of patch header"
msgstr ""
msgid "hg qapplied [-s] [PATCH]"
msgstr ""
msgid "use pull protocol to copy metadata"
msgstr ""
msgid "do not update the new working directories"
msgstr ""
msgid "use uncompressed transfer (fast over LAN)"
msgstr ""
msgid "location of source patch repo"
msgstr ""
msgid "hg qclone [OPTION]... SOURCE [DEST]"
msgstr ""
msgid "hg qcommit [OPTION]... [FILE]..."
msgstr ""
msgid "hg qdiff [OPTION]... [FILE]..."
msgstr ""
msgid "keep patch file"
msgstr ""
msgid "stop managing a revision"
msgstr ""
msgid "hg qdelete [-k] [-r REV]... [PATCH]..."
msgstr ""
msgid "edit patch header"
msgstr ""
msgid "keep folded patch files"
msgstr ""
msgid "hg qfold [-e] [-k] [-m TEXT] [-l FILE] PATCH..."
msgstr ""
msgid "overwrite any local changes"
msgstr ""
msgid "hg qgoto [OPTION]... PATCH"
msgstr ""
msgid "list all patches and guards"
msgstr ""
msgid "drop all guards"
msgstr ""
msgid "hg qguard [-l] [-n] [PATCH] [+GUARD]... [-GUARD]..."
msgstr ""
msgid "hg qheader [PATCH]"
msgstr ""
msgid "import file in patch dir"
msgstr ""
msgid "patch file name"
msgstr "patch navn"
msgid "overwrite existing files"
msgstr ""
msgid "place existing revisions under mq control"
msgstr ""
msgid "use git extended diff format"
msgstr ""
msgid "hg qimport [-e] [-n NAME] [-f] [-g] [-r REV]... FILE..."
msgstr ""
msgid "create queue repository"
msgstr "opret kø-repository"
msgid "hg qinit [-c]"
msgstr ""
msgid "import uncommitted changes into patch"
msgstr ""
msgid "add \"From: <current user>\" to patch"
msgstr ""
msgid "add \"From: <given user>\" to patch"
msgstr ""
msgid "add \"Date: <current date>\" to patch"
msgstr ""
msgid "add \"Date: <given date>\" to patch"
msgstr ""
msgid "hg qnew [-e] [-m TEXT] [-l FILE] [-f] PATCH [FILE]..."
msgstr ""
msgid "hg qnext [-s]"
msgstr ""
msgid "hg qprev [-s]"
msgstr ""
msgid "pop all patches"
msgstr ""
msgid "queue name to pop"
msgstr ""
msgid "forget any local changes"
msgstr ""
msgid "hg qpop [-a] [-n NAME] [-f] [PATCH | INDEX]"
msgstr ""
msgid "apply if the patch has rejects"
msgstr ""
msgid "list patch name in commit text"
msgstr ""
msgid "apply all patches"
msgstr ""
msgid "merge from another queue"
msgstr ""
msgid "merge queue name"
msgstr ""
msgid "hg qpush [-f] [-l] [-a] [-m] [-n NAME] [PATCH | INDEX]"
msgstr ""
msgid "refresh only files already in the patch and specified files"
msgstr ""
msgid "add/update \"From: <current user>\" in patch"
msgstr ""
msgid "add/update \"From: <given user>\" in patch"
msgstr ""
msgid "update \"Date: <current date>\" in patch (if present)"
msgstr ""
msgid "update \"Date: <given date>\" in patch (if present)"
msgstr ""
msgid "hg qrefresh [-I] [-X] [-e] [-m TEXT] [-l FILE] [-s] [FILE]..."
msgstr ""
msgid "hg qrename PATCH1 [PATCH2]"
msgstr ""
msgid "delete save entry"
msgstr ""
msgid "update queue working dir"
msgstr ""
msgid "hg qrestore [-d] [-u] REV"
msgstr ""
msgid "copy patch directory"
msgstr ""
msgid "copy directory name"
msgstr ""
msgid "clear queue status file"
msgstr ""
msgid "force copy"
msgstr ""
msgid "hg qsave [-m TEXT] [-l FILE] [-c] [-n NAME] [-e] [-f]"
msgstr ""
msgid "disable all guards"
msgstr ""
msgid "list all guards in series file"
msgstr ""
msgid "pop to before first guarded applied patch"
msgstr ""
msgid "pop, then reapply patches"
msgstr ""
msgid "hg qselect [OPTION]... [GUARD]..."
msgstr ""
msgid "print patches not in series"
msgstr ""
msgid "hg qseries [-ms]"
msgstr ""
msgid "force removal with local changes"
msgstr ""
msgid "bundle unrelated changesets"
msgstr ""
msgid "no backups"
msgstr ""
msgid "hg strip [-f] [-b] [-n] REV"
msgstr ""
msgid "hg qtop [-s]"
msgstr ""
msgid "hg qunapplied [-s] [PATCH]"
msgstr ""
msgid "finish all applied changesets"
msgstr ""
msgid "hg qfinish [-a] [REV...]"
msgstr ""
msgid ""
"hook extension to email notifications on commits/pushes\n"
"\n"
"Subscriptions can be managed through hgrc. Default mode is to print\n"
"messages to stdout, for testing and configuring.\n"
"\n"
"To use, configure notify extension and enable in hgrc like this:\n"
"\n"
" [extensions]\n"
" hgext.notify =\n"
"\n"
" [hooks]\n"
" # one email for each incoming changeset\n"
" incoming.notify = python:hgext.notify.hook\n"
" # batch emails when many changesets incoming at one time\n"
" changegroup.notify = python:hgext.notify.hook\n"
"\n"
" [notify]\n"
" # config items go in here\n"
"\n"
" config items:\n"
"\n"
" REQUIRED:\n"
" config = /path/to/file # file containing subscriptions\n"
"\n"
" OPTIONAL:\n"
" test = True # print messages to stdout for testing\n"
" strip = 3 # number of slashes to strip for url paths\n"
" domain = example.com # domain to use if committer missing domain\n"
" style = ... # style file to use when formatting email\n"
" template = ... # template to use when formatting email\n"
" incoming = ... # template to use when run as incoming hook\n"
" changegroup = ... # template when run as changegroup hook\n"
" maxdiff = 300 # max lines of diffs to include (0=none, -1=all)\n"
" maxsubject = 67 # truncate subject line longer than this\n"
" diffstat = True # add a diffstat before the diff content\n"
" sources = serve # notify if source of incoming changes in this "
"list\n"
" # (serve == ssh or http, push, pull, bundle)\n"
" [email]\n"
" from = user@host.com # email address to send as if none given\n"
" [web]\n"
" baseurl = http://hgserver/... # root of hg web site for browsing commits\n"
"\n"
" notify config file has same format as regular hgrc. it has two\n"
" sections so you can express subscriptions in whatever way is handier\n"
" for you.\n"
"\n"
" [usersubs]\n"
" # key is subscriber email, value is \",\"-separated list of glob "
"patterns\n"
" user@host = pattern\n"
"\n"
" [reposubs]\n"
" # key is glob pattern, value is \",\"-separated list of subscriber "
"emails\n"
" pattern = user@host\n"
"\n"
" glob patterns are matched against path to repo root.\n"
"\n"
" if you like, you can put notify config file in repo that users can\n"
" push changes to, they can manage their own subscriptions."
msgstr ""
msgid "email notification class."
msgstr ""
msgid "strip leading slashes from local path, turn into web-safe path."
msgstr ""
msgid "try to clean up email addresses."
msgstr ""
msgid "return list of email addresses of subscribers to this repo."
msgstr ""
msgid "format one changeset."
msgstr ""
msgid "true if incoming changes from this source should be skipped."
msgstr ""
msgid "send message."
msgstr ""
msgid "try to make subject line exist and be useful."
msgstr ""
msgid "%s: %d new changesets"
msgstr ""
msgid "try to make message have proper sender."
msgstr ""
msgid "notify: sending %d subscribers %d changes\n"
msgstr ""
msgid ""
"\n"
"diffs (truncated from %d to %d lines):\n"
"\n"
msgstr ""
msgid ""
"\n"
"diffs (%d lines):\n"
"\n"
msgstr ""
msgid ""
"send email notifications to interested subscribers.\n"
"\n"
" if used as changegroup hook, send one email for all changesets in\n"
" changegroup. else send one email per changeset."
msgstr ""
msgid "notify: no subscribers to repo %s\n"
msgstr ""
msgid "notify: changes have source \"%s\" - skipping\n"
msgstr ""
msgid ""
"browse command output with external pager\n"
"\n"
"To set the pager that should be used, set the application variable:\n"
"\n"
" [pager]\n"
" pager = LESS='FSRX' less\n"
"\n"
"If no pager is set, the pager extensions uses the environment\n"
"variable $PAGER. If neither pager.pager, nor $PAGER is set, no pager\n"
"is used.\n"
"\n"
"If you notice \"BROKEN PIPE\" error messages, you can disable them\n"
"by setting:\n"
"\n"
" [pager]\n"
" quiet = True\n"
"\n"
"You can disable the pager for certain commands by adding them to the\n"
"pager.ignore list:\n"
"\n"
" [pager]\n"
" ignore = version, help, update\n"
"\n"
"You can also enable the pager only for certain commands using pager.attend:\n"
"\n"
" [pager]\n"
" attend = log\n"
"\n"
"If pager.attend is present, pager.ignore will be ignored.\n"
"\n"
"To ignore global commands like \"hg version\" or \"hg help\", you have to "
"specify\n"
"them in the global .hgrc\n"
msgstr ""
msgid ""
"use suffixes to refer to ancestor revisions\n"
"\n"
"This extension allows you to use git-style suffixes to refer to\n"
"the ancestors of a specific revision.\n"
"\n"
"For example, if you can refer to a revision as \"foo\", then:\n"
"\n"
"- foo^N = Nth parent of foo:\n"
" foo^0 = foo\n"
" foo^1 = first parent of foo\n"
" foo^2 = second parent of foo\n"
" foo^ = foo^1\n"
"\n"
"- foo~N = Nth first grandparent of foo\n"
" foo~0 = foo\n"
" foo~1 = foo^1 = foo^ = first parent of foo\n"
" foo~2 = foo^1^1 = foo^^ = first parent of first parent of foo\n"
msgstr ""
msgid ""
"sending Mercurial changesets as a series of patch emails\n"
"\n"
"The series is started off with a \"[PATCH 0 of N]\" introduction,\n"
"which describes the series as a whole.\n"
"\n"
"Each patch email has a Subject line of \"[PATCH M of N] ...\", using\n"
"the first line of the changeset description as the subject text.\n"
"The message contains two or three body parts:\n"
"\n"
" The remainder of the changeset description.\n"
"\n"
" [Optional] The result of running diffstat on the patch.\n"
"\n"
" The patch itself, as generated by \"hg export\".\n"
"\n"
"Each message refers to all of its predecessors using the In-Reply-To\n"
"and References headers, so they will show up as a sequence in\n"
"threaded mail and news readers, and in mail archives.\n"
"\n"
"For each changeset, you will be prompted with a diffstat summary and\n"
"the changeset summary, so you can be sure you are sending the right "
"changes.\n"
"\n"
"To enable this extension:\n"
"\n"
" [extensions]\n"
" hgext.patchbomb =\n"
"\n"
"To configure other defaults, add a section like this to your hgrc file:\n"
"\n"
" [email]\n"
" from = My Name <my@email>\n"
" to = recipient1, recipient2, ...\n"
" cc = cc1, cc2, ...\n"
" bcc = bcc1, bcc2, ...\n"
"\n"
"Then you can use the \"hg email\" command to mail a series of changesets\n"
"as a patchbomb.\n"
"\n"
"To avoid sending patches prematurely, it is a good idea to first run\n"
"the \"email\" command with the \"-n\" option (test only). You will be\n"
"prompted for an email recipient address, a subject an an introductory\n"
"message describing the patches of your patchbomb. Then when all is\n"
"done, patchbomb messages are displayed. If PAGER environment variable\n"
"is set, your pager will be fired up once for each patchbomb message, so\n"
"you can verify everything is alright.\n"
"\n"
"The \"-m\" (mbox) option is also very useful. Instead of previewing\n"
"each patchbomb message in a pager or sending the messages directly,\n"
"it will create a UNIX mailbox file with the patch emails. This\n"
"mailbox file can be previewed with any mail user agent which supports\n"
"UNIX mbox files, i.e. with mutt:\n"
"\n"
" % mutt -R -f mbox\n"
"\n"
"When you are previewing the patchbomb messages, you can use `formail'\n"
"(a utility that is commonly installed as part of the procmail package),\n"
"to send each message out:\n"
"\n"
" % formail -s sendmail -bm -t < mbox\n"
"\n"
"That should be all. Now your patchbomb is on its way out."
msgstr ""
msgid "Please enter a valid value.\n"
msgstr ""
msgid "does the diffstat above look okay? "
msgstr ""
msgid "diffstat rejected"
msgstr "diffstat afvist"
msgid ""
"send changesets by email\n"
"\n"
" By default, diffs are sent in the format generated by hg export,\n"
" one per message. The series starts with a \"[PATCH 0 of N]\"\n"
" introduction, which describes the series as a whole.\n"
"\n"
" Each patch email has a Subject line of \"[PATCH M of N] ...\", using\n"
" the first line of the changeset description as the subject text.\n"
" The message contains two or three body parts. First, the rest of\n"
" the changeset description. Next, (optionally) if the diffstat\n"
" program is installed, the result of running diffstat on the patch.\n"
" Finally, the patch itself, as generated by \"hg export\".\n"
"\n"
" With --outgoing, emails will be generated for patches not\n"
" found in the destination repository (or only those which are\n"
" ancestors of the specified revisions if any are provided)\n"
"\n"
" With --bundle, changesets are selected as for --outgoing,\n"
" but a single email containing a binary Mercurial bundle as an\n"
" attachment will be sent.\n"
"\n"
" Examples:\n"
"\n"
" hg email -r 3000 # send patch 3000 only\n"
" hg email -r 3000 -r 3001 # send patches 3000 and 3001\n"
" hg email -r 3000:3005 # send patches 3000 through 3005\n"
" hg email 3000 # send patch 3000 (deprecated)\n"
"\n"
" hg email -o # send all patches not in default\n"
" hg email -o DEST # send all patches not in DEST\n"
" hg email -o -r 3000 # send all ancestors of 3000 not in default\n"
" hg email -o -r 3000 DEST # send all ancestors of 3000 not in DEST\n"
"\n"
" hg email -b # send bundle of all patches not in default\n"
" hg email -b DEST # send bundle of all patches not in DEST\n"
" hg email -b -r 3000 # bundle of all ancestors of 3000 not in "
"default\n"
" hg email -b -r 3000 DEST # bundle of all ancestors of 3000 not in DEST\n"
"\n"
" Before using this command, you will need to enable email in your hgrc.\n"
" See the [email] section in hgrc(5) for details.\n"
" "
msgstr ""
msgid "Return the revisions present locally but not in dest"
msgstr ""
msgid "specify at least one changeset with -r or -o"
msgstr "angiv mindst en ændring med -r eller -o"
msgid "--outgoing mode always on with --bundle; do not re-specify --outgoing"
msgstr ""
msgid "too many destinations"
msgstr "for mange destinationer"
msgid "use only one form to specify the revision"
msgstr ""
msgid ""
"\n"
"Write the introductory message for the patch series.\n"
"\n"
msgstr ""
msgid ""
"This patch series consists of %d patches.\n"
"\n"
msgstr ""
msgid "Final summary:\n"
msgstr ""
msgid "Displaying "
msgstr ""
msgid "Writing "
msgstr ""
msgid "Sending "
msgstr ""
msgid "send patches as attachments"
msgstr ""
msgid "send patches as inline attachments"
msgstr ""
msgid "email addresses of blind copy recipients"
msgstr ""
msgid "email addresses of copy recipients"
msgstr ""
msgid "add diffstat output to messages"
msgstr ""
msgid "use the given date as the sending date"
msgstr ""
msgid "use the given file as the series description"
msgstr ""
msgid "email address of sender"
msgstr ""
msgid "print messages that would be sent"
msgstr ""
msgid "write messages to mbox file instead of sending them"
msgstr ""
msgid "subject of first message (intro or single patch)"
msgstr ""
msgid "email addresses of recipients"
msgstr ""
msgid "omit hg patch header"
msgstr ""
msgid "send changes not found in the target repository"
msgstr ""
msgid "send changes not in target as a binary bundle"
msgstr ""
msgid "a revision to send"
msgstr ""
msgid "run even when remote repository is unrelated (with -b)"
msgstr ""
msgid "a base changeset to specify instead of a destination (with -b)"
msgstr ""
msgid "send an introduction email for a single patch"
msgstr ""
msgid "hg email [OPTION]... [DEST]..."
msgstr ""
msgid ""
"removes files not tracked by Mercurial\n"
"\n"
" Delete files not known to Mercurial. This is useful to test local and\n"
" uncommitted changes in an otherwise-clean source tree.\n"
"\n"
" This means that purge will delete:\n"
" - Unknown files: files marked with \"?\" by \"hg status\"\n"
" - Empty directories: in fact Mercurial ignores directories unless they\n"
" contain files under source control managment\n"
" But it will leave untouched:\n"
" - Modified and unmodified tracked files\n"
" - Ignored files (unless --all is specified)\n"
" - New files added to the repository (with \"hg add\")\n"
"\n"
" If directories are given on the command line, only files in these\n"
" directories are considered.\n"
"\n"
" Be careful with purge, as you could irreversibly delete some files you\n"
" forgot to add to the repository. If you only want to print the list of\n"
" files that this program would delete, use the --print option.\n"
" "
msgstr ""
msgid "%s cannot be removed"
msgstr ""
msgid "warning: %s\n"
msgstr ""
msgid "Removing file %s\n"
msgstr ""
msgid "Removing directory %s\n"
msgstr ""
msgid "abort if an error occurs"
msgstr ""
msgid "purge ignored files too"
msgstr ""
msgid "print the file names instead of deleting them"
msgstr ""
msgid "end filenames with NUL, for use with xargs (implies -p)"
msgstr ""
msgid "hg purge [OPTION]... [DIR]..."
msgstr ""
msgid ""
"move sets of revisions to a different ancestor\n"
"\n"
"This extension lets you rebase changesets in an existing Mercurial "
"repository.\n"
"\n"
"For more information:\n"
"http://www.selenic.com/mercurial/wiki/index.cgi/RebaseProject\n"
msgstr ""
msgid "return the correct ancestor"
msgstr ""
msgid "first revision, do not change ancestor\n"
msgstr ""
msgid ""
"move changeset (and descendants) to a different branch\n"
"\n"
" Rebase uses repeated merging to graft changesets from one part of "
"history\n"
" onto another. This can be useful for linearizing local changes relative "
"to\n"
" a master development tree.\n"
"\n"
" If a rebase is interrupted to manually resolve a merge, it can be "
"continued\n"
" with --continue or aborted with --abort.\n"
" "
msgstr ""
msgid "cannot use both keepbranches and extrafn"
msgstr ""
msgid "cannot use both abort and continue"
msgstr ""
msgid "cannot use collapse with continue or abort"
msgstr ""
msgid "abort and continue do not allow specifying revisions"
msgstr ""
msgid "cannot specify both a revision and a base"
msgstr ""
msgid "nothing to rebase\n"
msgstr ""
msgid "rebase merging completed\n"
msgstr ""
msgid "warning: new changesets detected on source branch, not stripping\n"
msgstr ""
msgid "rebase completed\n"
msgstr ""
msgid "%d revisions have been skipped\n"
msgstr ""
msgid ""
"Skip commit if collapsing has been required and rev is not the last\n"
" revision, commit otherwise\n"
" "
msgstr ""
msgid " set parents\n"
msgstr ""
msgid "Rebase a single revision"
msgstr ""
msgid "rebasing %d:%s\n"
msgstr ""
msgid " future parents are %d and %d\n"
msgstr ""
msgid " update to %d:%s\n"
msgstr " opdater til %d:%s\n"
msgid " already in target\n"
msgstr ""
msgid " merge against %d:%s\n"
msgstr ""
msgid "fix unresolved conflicts with hg resolve then run hg rebase --continue"
msgstr ""
msgid "resuming interrupted rebase\n"
msgstr ""
msgid "no changes, revision %d skipped\n"
msgstr ""
msgid "next revision set to %s\n"
msgstr ""
msgid "Return the new parent relationship of the revision that will be rebased"
msgstr ""
msgid "cannot use revision %d as base, result would have 3 parents"
msgstr ""
msgid "Update rebased mq patches - finalize and then import them"
msgstr ""
msgid "revision %d is an mq patch (%s), finalize it.\n"
msgstr ""
msgid "import mq patch %d (%s)\n"
msgstr ""
msgid "Store the current status to allow recovery"
msgstr ""
msgid "rebase status stored\n"
msgstr ""
msgid "Remove the status files"
msgstr ""
msgid "Restore a previously stored status"
msgstr ""
msgid "rebase status resumed\n"
msgstr ""
msgid "no rebase in progress"
msgstr ""
msgid "Restore the repository to its original state"
msgstr ""
msgid "warning: new changesets detected on target branch, not stripping\n"
msgstr ""
msgid "rebase aborted\n"
msgstr ""
msgid "Define which revisions are going to be rebased and where"
msgstr ""
msgid "cannot rebase onto an applied mq patch"
msgstr ""
msgid "cannot rebase an ancestor"
msgstr ""
msgid "cannot rebase a descendant"
msgstr ""
msgid "already working on current\n"
msgstr ""
msgid "already working on the current branch\n"
msgstr ""
msgid "rebase onto %d starting from %d\n"
msgstr ""
msgid "unable to collapse, there is more than one external parent"
msgstr ""
msgid "Call rebase after pull if the latter has been invoked with --rebase"
msgstr ""
msgid "--update and --rebase are not compatible"
msgstr ""
msgid "Replace pull with a decorator to provide --rebase option"
msgstr ""
msgid "rebase working directory to branch head"
msgstr ""
msgid "keep original revisions"
msgstr ""
msgid "keep original branches"
msgstr ""
msgid "rebase from a given revision"
msgstr ""
msgid "rebase from the base of a given revision"
msgstr ""
msgid "rebase onto a given revision"
msgstr ""
msgid "collapse the rebased revisions"
msgstr ""
msgid "continue an interrupted rebase"
msgstr ""
msgid "abort an interrupted rebase"
msgstr ""
msgid ""
"hg rebase [-s rev | -b rev] [-d rev] [--collapse] | [-c] | [-a] | [--keep]"
msgstr ""
msgid "interactive change selection during commit or qrefresh"
msgstr ""
msgid ""
"like patch.iterhunks, but yield different events\n"
"\n"
" - ('file', [header_lines + fromfile + tofile])\n"
" - ('context', [context_lines])\n"
" - ('hunk', [hunk_lines])\n"
" - ('range', (-start,len, +start,len, diffp))\n"
" "
msgstr ""
msgid "scan lr while predicate holds"
msgstr ""
msgid ""
"patch header\n"
"\n"
" XXX shoudn't we move this to mercurial/patch.py ?\n"
" "
msgstr ""
msgid "this modifies a binary file (all or nothing)\n"
msgstr ""
msgid "this is a binary file\n"
msgstr ""
msgid "%d hunks, %d lines changed\n"
msgstr ""
msgid "hunk -> (n+,n-)"
msgstr ""
msgid ""
"patch hunk\n"
"\n"
" XXX shouldn't we merge this with patch.hunk ?\n"
" "
msgstr ""
msgid "patch -> [] of hunks "
msgstr ""
msgid "patch parsing state machine"
msgstr ""
msgid "Interactively filter patch chunks into applied-only chunks"
msgstr ""
msgid ""
"fetch next portion from chunks until a 'header' is seen\n"
" NB: header == new-file mark\n"
" "
msgstr ""
msgid ""
"prompt query, and process base inputs\n"
"\n"
" - y/n for the rest of file\n"
" - y/n for the rest\n"
" - ? (help)\n"
" - q (quit)\n"
"\n"
" else, input is returned to the caller.\n"
" "
msgstr ""
msgid "[Ynsfdaq?]"
msgstr ""
msgid "y"
msgstr ""
msgid "?"
msgstr ""
msgid "y - record this change"
msgstr ""
msgid "s"
msgstr ""
msgid "f"
msgstr ""
msgid "d"
msgstr ""
msgid "a"
msgstr ""
msgid "q"
msgstr ""
msgid "user quit"
msgstr ""
msgid "examine changes to %s?"
msgstr ""
msgid " and "
msgstr ""
msgid "record this change to %r?"
msgstr ""
msgid ""
"interactively select changes to commit\n"
"\n"
" If a list of files is omitted, all changes reported by \"hg status\"\n"
" will be candidates for recording.\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
"\n"
" You will be prompted for whether to record changes to each\n"
" modified file, and for files with multiple changes, for each\n"
" change to use. For each query, the following responses are\n"
" possible:\n"
"\n"
" y - record this change\n"
" n - skip this change\n"
"\n"
" s - skip remaining changes to this file\n"
" f - record remaining changes to this file\n"
"\n"
" d - done, skip remaining changes and files\n"
" a - record all changes to all remaining files\n"
" q - quit, recording no changes\n"
"\n"
" ? - display help"
msgstr ""
msgid ""
"interactively record a new patch\n"
"\n"
" see 'hg help qnew' & 'hg help record' for more information and usage\n"
" "
msgstr ""
msgid "'mq' extension not loaded"
msgstr ""
msgid "running non-interactively, use commit instead"
msgstr ""
msgid ""
"This is generic record driver.\n"
"\n"
" It's job is to interactively filter local changes, and accordingly\n"
" prepare working dir into a state, where the job can be delegated to\n"
" non-interactive commit command such as 'commit' or 'qrefresh'.\n"
"\n"
" After the actual job is done by non-interactive command, working "
"dir\n"
" state is restored to original.\n"
"\n"
" In the end we'll record intresting changes, and everything else will "
"be\n"
" left in place, so the user can continue his work.\n"
" "
msgstr ""
msgid "no changes to record\n"
msgstr ""
msgid "backup %r as %r\n"
msgstr ""
msgid "applying patch\n"
msgstr ""
msgid "patch failed to apply"
msgstr ""
msgid "restoring %r to %r\n"
msgstr ""
msgid "hg record [OPTION]... [FILE]..."
msgstr ""
msgid "hg qrecord [OPTION]... PATCH [FILE]..."
msgstr ""
msgid ""
"patch transplanting tool\n"
"\n"
"This extension allows you to transplant patches from another branch.\n"
"\n"
"Transplanted patches are recorded in .hg/transplant/transplants, as a map\n"
"from a changeset hash to its hash in the source repository.\n"
msgstr ""
msgid ""
"returns True if a node is already an ancestor of parent\n"
" or has already been transplanted"
msgstr ""
msgid "apply the revisions in revmap one by one in revision order"
msgstr ""
msgid "skipping already applied revision %s\n"
msgstr ""
msgid "skipping merge changeset %s:%s\n"
msgstr ""
msgid "%s merged at %s\n"
msgstr ""
msgid "%s transplanted to %s\n"
msgstr ""
msgid "arbitrarily rewrite changeset before applying it"
msgstr ""
msgid "filtering %s\n"
msgstr ""
msgid "filter failed"
msgstr ""
msgid "apply the patch in patchfile to the repository as a transplant"
msgstr ""
msgid "can only omit patchfile if merging"
msgstr ""
msgid "%s: empty changeset"
msgstr ""
msgid "Fix up the merge and run hg transplant --continue"
msgstr ""
msgid "recover last transaction and apply remaining changesets"
msgstr ""
msgid "%s transplanted as %s\n"
msgstr ""
msgid "commit working directory using journal metadata"
msgstr ""
msgid "transplant log file is corrupt"
msgstr ""
msgid "working dir not at transplant parent %s"
msgstr ""
msgid "commit failed"
msgstr ""
msgid "journal changelog metadata for later recover"
msgstr ""
msgid "remove changelog journal"
msgstr ""
msgid "interactively transplant changesets"
msgstr ""
msgid "apply changeset? [ynmpcq?]:"
msgstr ""
msgid ""
"transplant changesets from another branch\n"
"\n"
" Selected changesets will be applied on top of the current working\n"
" directory with the log of the original changeset. If --log is\n"
" specified, log messages will have a comment appended of the form:\n"
"\n"
" (transplanted from CHANGESETHASH)\n"
"\n"
" You can rewrite the changelog message with the --filter option.\n"
" Its argument will be invoked with the current changelog message\n"
" as $1 and the patch as $2.\n"
"\n"
" If --source is specified, selects changesets from the named\n"
" repository. If --branch is specified, selects changesets from the\n"
" branch holding the named revision, up to that revision. If --all\n"
" is specified, all changesets on the branch will be transplanted,\n"
" otherwise you will be prompted to select the changesets you want.\n"
"\n"
" hg transplant --branch REVISION --all will rebase the selected branch\n"
" (up to the named revision) onto your current working directory.\n"
"\n"
" You can optionally mark selected transplanted changesets as\n"
" merge changesets. You will not be prompted to transplant any\n"
" ancestors of a merged transplant, and you can merge descendants\n"
" of them normally instead of transplanting them.\n"
"\n"
" If no merges or revisions are provided, hg transplant will start\n"
" an interactive changeset browser.\n"
"\n"
" If a changeset application fails, you can fix the merge by hand and\n"
" then resume where you left off by calling hg transplant --continue.\n"
" "
msgstr ""
msgid "--continue is incompatible with branch, all or merge"
msgstr ""
msgid "no source URL, branch tag or revision list provided"
msgstr ""
msgid "--all requires a branch revision"
msgstr ""
msgid "--all is incompatible with a revision list"
msgstr ""
msgid "no revision checked out"
msgstr ""
msgid "outstanding uncommitted merges"
msgstr ""
msgid "outstanding local changes"
msgstr ""
msgid "pull patches from REPOSITORY"
msgstr ""
msgid "pull patches from branch BRANCH"
msgstr ""
msgid "pull all changesets up to BRANCH"
msgstr ""
msgid "skip over REV"
msgstr ""
msgid "merge at REV"
msgstr ""
msgid "append transplant info to log message"
msgstr ""
msgid "continue last transplant session after repair"
msgstr ""
msgid "filter changesets through FILTER"
msgstr ""
msgid ""
"hg transplant [-s REPOSITORY] [-b BRANCH [-a]] [-p REV] [-m REV] [REV]..."
msgstr ""
msgid ""
"allow to use MBCS path with problematic encoding.\n"
"\n"
"Some MBCS encodings are not good for some path operations\n"
"(i.e. splitting path, case conversion, etc.) with its encoded bytes.\n"
"We call such a encoding (i.e. shift_jis and big5) as \"problematic\n"
"encoding\". This extension can be used to fix the issue with those\n"
"encodings by wrapping some functions to convert to unicode string\n"
"before path operation.\n"
"\n"
"This extension is usefull for:\n"
" * Japanese Windows users using shift_jis encoding.\n"
" * Chinese Windows users using big5 encoding.\n"
" * All users who use a repository with one of problematic encodings\n"
" on case-insensitive file system.\n"
"\n"
"This extension is not needed for:\n"
" * Any user who use only ascii chars in path.\n"
" * Any user who do not use any of problematic encodings.\n"
"\n"
"Note that there are some limitations on using this extension:\n"
" * You should use single encoding in one repository.\n"
" * You should set same encoding for the repository by locale or HGENCODING.\n"
"\n"
"To use this extension, enable the extension in .hg/hgrc or ~/.hgrc:\n"
"\n"
" [extensions]\n"
" hgext.win32mbcs =\n"
"\n"
"Path encoding conversion are done between unicode and util._encoding\n"
"which is decided by mercurial from current locale setting or HGENCODING.\n"
"\n"
msgstr ""
msgid "[win32mbcs] filename conversion fail with %s encoding\n"
msgstr ""
msgid "[win32mbcs] cannot activate on this platform.\n"
msgstr ""
msgid "[win32mbcs] activated with encoding: %s\n"
msgstr ""
msgid ""
"WARNING: %s already has %s line endings\n"
"and does not need EOL conversion by the win32text plugin.\n"
"Before your next commit, please reconsider your encode/decode settings in \n"
"Mercurial.ini or %s.\n"
msgstr ""
msgid "Attempt to commit or push text file(s) using %s line endings\n"
msgstr ""
msgid "in %s: %s\n"
msgstr ""
msgid ""
"\n"
"To prevent this mistake in your local repository,\n"
"add to Mercurial.ini or .hg/hgrc:\n"
"\n"
"[hooks]\n"
"pretxncommit.%s = python:hgext.win32text.forbid%s\n"
"\n"
"and also consider adding:\n"
"\n"
"[extensions]\n"
"hgext.win32text =\n"
"[encode]\n"
"** = %sencode:\n"
"[decode]\n"
"** = %sdecode:\n"
msgstr ""
msgid ""
"zeroconf support for mercurial repositories\n"
"\n"
"Zeroconf enabled repositories will be announced in a network without the "
"need\n"
"to configure a server or a service. They can be discovered without knowing\n"
"their actual IP address.\n"
"\n"
"To use the zeroconf extension add the following entry to your hgrc file:\n"
"\n"
"[extensions]\n"
"hgext.zeroconf =\n"
"\n"
"To allow other people to discover your repository using run \"hg serve\" in "
"your\n"
"repository.\n"
"\n"
" $ cd test\n"
" $ hg serve\n"
"\n"
"You can discover zeroconf enabled repositories by running \"hg paths\".\n"
"\n"
" $ hg paths\n"
" zc-test = http://example.com:8000/test\n"
msgstr ""
msgid "archive prefix contains illegal components"
msgstr "arkivpræfix indeholder ugyldige komponenter"
msgid "cannot give prefix when archiving to files"
msgstr "kan ikke give præfix ved arkivering til filer"
msgid "unknown archive type '%s'"
msgstr "ukendt arkivtype '%s'"
msgid "invalid changegroup"
msgstr ""
msgid "unknown parent"
msgstr "ukendt forældre"
msgid "integrity check failed on %s:%d"
msgstr "integritetstjek fejlede på %s:%d"
msgid "%s: not a Mercurial bundle file"
msgstr "%s er ikke en Mercurial bundle fil"
msgid "%s: unknown bundle version"
msgstr "%s: ukendt bundle version"
msgid "%s: unknown bundle compression type"
msgstr "%s: ukendt bundle kompressionstype"
msgid "cannot create new bundle repository"
msgstr ""
msgid "premature EOF reading chunk (got %d bytes, expected %d)"
msgstr "for tidlig EOF ved læsning af chunk (fik %d bytes, forventede %d)"
msgid "username %s contains a newline"
msgstr "brugernavn %s indeholder et linieskift"
msgid "options --message and --logfile are mutually exclusive"
msgstr ""
msgid "can't read commit message '%s': %s"
msgstr "Kan ikke lase commit besked '%s': %s"
msgid "too many revisions specified"
msgstr "der er specificeret for mange revisioner"
msgid "invalid format spec '%%%s' in output file name"
msgstr ""
msgid "adding %s\n"
msgstr "tilføjer %s\n"
msgid "removing %s\n"
msgstr "fjerner %s\n"
msgid "recording removal of %s as rename to %s (%d%% similar)\n"
msgstr "noterer fjernelse af %s som en omdøbning til %s (%d%% lighed)\n"
msgid "%s: not copying - file is not managed\n"
msgstr "%s: kopierer ikke - filen er ikke versionsstyret\n"
msgid "%s: not copying - file has been marked for remove\n"
msgstr "%s: kopierer ikke - filen er markeret til sletning\n"
msgid "%s: not overwriting - %s collides with %s\n"
msgstr "%s: overskriver ikke - %s kolliderer med %s\n"
msgid "%s: not overwriting - file exists\n"
msgstr "%s: overskriver ikke - filen eksisterer\n"
msgid "%s: deleted in working copy\n"
msgstr "%s: slettet i arbejdskopien\n"
msgid "%s: cannot copy - %s\n"
msgstr "%s: kan ikke kopiere - %s\n"
msgid "%s %s to %s\n"
msgstr "%s: %s til %s\n"
msgid "%s has not been committed yet, so no copy data will be stored for %s.\n"
msgstr ""
"%s er endnu ikke comitted, så der vil ikke blive gemt kopieringsdata for %"
"s.\n"
msgid "no source or destination specified"
msgstr "ingen kilde eller destination angivet"
msgid "no destination specified"
msgstr "ingen destination angivet"
msgid "with multiple sources, destination must be an existing directory"
msgstr ""
"destinationen skal være en eksisterende mappe når der angivet flere kilder"
msgid "destination %s is not a directory"
msgstr "destinationen %s er ikke en mappe"
msgid "no files to copy"
msgstr "ingen filer at kopiere"
msgid "(consider using --after)\n"
msgstr "(overvej at bruge --after)\n"
msgid "changeset: %d:%s\n"
msgstr "ændring: %d:%s\n"
msgid "branch: %s\n"
msgstr "gren: %s\n"
msgid "tag: %s\n"
msgstr "mærkat: %s\n"
msgid "parent: %d:%s\n"
msgstr "forældre: %d:%s\n"
msgid "manifest: %d:%s\n"
msgstr ""
msgid "user: %s\n"
msgstr "bruger: %s\n"
msgid "date: %s\n"
msgstr "dato: %s\n"
msgid "files+:"
msgstr "filer+:"
msgid "files-:"
msgstr "filer-:"
msgid "files:"
msgstr ""
msgid "files: %s\n"
msgstr "filer: %s\n"
msgid "copies: %s\n"
msgstr "kopier: %s\n"
msgid "extra: %s=%s\n"
msgstr "ekstra: %s=%s\n"
msgid "description:\n"
msgstr "beskrivelse:\n"
msgid "summary: %s\n"
msgstr "uddrag: %s\n"
msgid "%s: no key named '%s'"
msgstr ""
msgid "%s: %s"
msgstr ""
msgid "Found revision %s from %s\n"
msgstr ""
msgid "revision matching date not found"
msgstr ""
msgid "cannot follow nonexistent file: \"%s\""
msgstr ""
msgid "%s:%s copy source revision cannot be found!\n"
msgstr ""
msgid "can only follow copies/renames for explicit file names"
msgstr ""
msgid "file %s not found!"
msgstr "filen %s blev ikke fundet!"
msgid "no match under directory %s!"
msgstr ""
msgid "can't commit %s: unsupported file type!"
msgstr ""
msgid "file %s not tracked!"
msgstr ""
msgid ""
"add the specified files on the next commit\n"
"\n"
" Schedule files to be version controlled and added to the repository.\n"
"\n"
" The files will be added to the repository at the next commit. To\n"
" undo an add before that, see hg revert.\n"
"\n"
" If no names are given, add all files in the repository.\n"
" "
msgstr ""
"tilføj de angivne filer ved næste commit\n"
"\n"
" Opskriv filer til at blive versionsstyret og tilføjet til arkivet.\n"
"\n"
" Filerne vil bliver tilføjet til arkivet ved næste commit. For at\n"
" omgøre en tilføjelse før det, se hg revert.\n"
"\n"
" Hvis der ikke er angivet nogen navne tilføjes alle filer i\n"
" arkivet.\n"
" "
msgid ""
"add all new files, delete all missing files\n"
"\n"
" Add all new files and remove all missing files from the repository.\n"
"\n"
" New files are ignored if they match any of the patterns in .hgignore. "
"As\n"
" with add, these changes take effect at the next commit.\n"
"\n"
" Use the -s option to detect renamed files. With a parameter > 0,\n"
" this compares every removed file with every added file and records\n"
" those similar enough as renames. This option takes a percentage\n"
" between 0 (disabled) and 100 (files must be identical) as its\n"
" parameter. Detecting renamed files this way can be expensive.\n"
" "
msgstr ""
msgid "similarity must be a number"
msgstr ""
msgid "similarity must be between 0 and 100"
msgstr ""
msgid ""
"show changeset information per file line\n"
"\n"
" List changes in files, showing the revision id responsible for each "
"line\n"
"\n"
" This command is useful to discover who did a change or when a change "
"took\n"
" place.\n"
"\n"
" Without the -a option, annotate will avoid processing files it\n"
" detects as binary. With -a, annotate will generate an annotation\n"
" anyway, probably with undesirable results.\n"
" "
msgstr ""
msgid "at least one file name or pattern required"
msgstr ""
msgid "at least one of -n/-c is required for -l"
msgstr ""
msgid "%s: binary file\n"
msgstr ""
msgid ""
"create unversioned archive of a repository revision\n"
"\n"
" By default, the revision used is the parent of the working\n"
" directory; use \"-r\" to specify a different revision.\n"
"\n"
" To specify the type of archive to create, use \"-t\". Valid\n"
" types are:\n"
"\n"
" \"files\" (default): a directory full of files\n"
" \"tar\": tar archive, uncompressed\n"
" \"tbz2\": tar archive, compressed using bzip2\n"
" \"tgz\": tar archive, compressed using gzip\n"
" \"uzip\": zip archive, uncompressed\n"
" \"zip\": zip archive, compressed using deflate\n"
"\n"
" The exact name of the destination archive or directory is given\n"
" using a format string; see \"hg help export\" for details.\n"
"\n"
" Each member added to an archive file has a directory prefix\n"
" prepended. Use \"-p\" to specify a format string for the prefix.\n"
" The default is the basename of the archive, with suffixes removed.\n"
" "
msgstr ""
msgid "no working directory: please specify a revision"
msgstr ""
msgid "repository root cannot be destination"
msgstr ""
msgid "cannot archive plain files to stdout"
msgstr ""
msgid ""
"reverse effect of earlier changeset\n"
"\n"
" Commit the backed out changes as a new changeset. The new\n"
" changeset is a child of the backed out changeset.\n"
"\n"
" If you back out a changeset other than the tip, a new head is\n"
" created. This head will be the new tip and you should merge this\n"
" backout changeset with another head (current one by default).\n"
"\n"
" The --merge option remembers the parent of the working directory\n"
" before starting the backout, then merges the new head with that\n"
" changeset afterwards. This saves you from doing the merge by\n"
" hand. The result of this merge is not committed, as for a normal\n"
" merge.\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
" "
msgstr ""
msgid "please specify just one revision"
msgstr ""
msgid "please specify a revision to backout"
msgstr ""
msgid "cannot back out change on a different branch"
msgstr ""
msgid "cannot back out a change with no parents"
msgstr ""
msgid "cannot back out a merge changeset without --parent"
msgstr ""
msgid "%s is not a parent of %s"
msgstr "%s er ikke forældre til %s"
msgid "cannot use --parent on non-merge changeset"
msgstr ""
msgid "Backed out changeset %s"
msgstr ""
msgid "changeset %s backs out changeset %s\n"
msgstr ""
msgid "merging with changeset %s\n"
msgstr ""
msgid "the backout changeset is a new head - do not forget to merge\n"
msgstr ""
msgid "(use \"backout --merge\" if you want to auto-merge)\n"
msgstr ""
msgid ""
"subdivision search of changesets\n"
"\n"
" This command helps to find changesets which introduce problems.\n"
" To use, mark the earliest changeset you know exhibits the problem\n"
" as bad, then mark the latest changeset which is free from the\n"
" problem as good. Bisect will update your working directory to a\n"
" revision for testing (unless the --noupdate option is specified).\n"
" Once you have performed tests, mark the working directory as bad\n"
" or good and bisect will either update to another candidate changeset\n"
" or announce that it has found the bad revision.\n"
"\n"
" As a shortcut, you can also use the revision argument to mark a\n"
" revision as good or bad without checking it out first.\n"
"\n"
" If you supply a command it will be used for automatic bisection. Its "
"exit\n"
" status will be used as flag to mark revision as bad or good. In case "
"exit\n"
" status is 0 the revision is marked as good, 125 - skipped, 127 (command "
"not\n"
" found) - bisection will be aborted and any other status bigger than 0 "
"will\n"
" mark revision as bad.\n"
" "
msgstr ""
msgid "The first %s revision is:\n"
msgstr "Den første %s revision er:\n"
msgid "Due to skipped revisions, the first %s revision could be any of:\n"
msgstr ""
msgid "cannot bisect (no known good revisions)"
msgstr ""
msgid "cannot bisect (no known bad revisions)"
msgstr ""
msgid "(use of 'hg bisect <cmd>' is deprecated)\n"
msgstr ""
msgid "incompatible arguments"
msgstr ""
msgid "failed to execute %s"
msgstr ""
msgid "%s killed"
msgstr "%s dræbt"
msgid "Changeset %s: %s\n"
msgstr "Ændring: %s: %s\n"
msgid "Testing changeset %s:%s (%s changesets remaining, ~%s tests)\n"
msgstr ""
msgid ""
"set or show the current branch name\n"
"\n"
" With no argument, show the current branch name. With one argument,\n"
" set the working directory branch name (the branch does not exist in\n"
" the repository until the next commit).\n"
"\n"
" Unless --force is specified, branch will not let you set a\n"
" branch name that shadows an existing branch.\n"
"\n"
" Use --clean to reset the working directory branch to that of the\n"
" parent of the working directory, negating a previous branch change.\n"
"\n"
" Use the command 'hg update' to switch to an existing branch.\n"
" "
msgstr ""
msgid "reset working directory to branch %s\n"
msgstr ""
msgid "a branch of the same name already exists (use --force to override)"
msgstr ""
msgid "marked working directory as branch %s\n"
msgstr ""
msgid ""
"list repository named branches\n"
"\n"
" List the repository's named branches, indicating which ones are\n"
" inactive. If active is specified, only show active branches.\n"
"\n"
" A branch is considered active if it contains repository heads.\n"
"\n"
" Use the command 'hg update' to switch to an existing branch.\n"
" "
msgstr ""
msgid ""
"create a changegroup file\n"
"\n"
" Generate a compressed changegroup file collecting changesets not\n"
" found in the other repository.\n"
"\n"
" If no destination repository is specified the destination is\n"
" assumed to have all the nodes specified by one or more --base\n"
" parameters. To create a bundle containing all changesets, use\n"
" --all (or --base null). To change the compression method applied,\n"
" use the -t option (by default, bundles are compressed using bz2).\n"
"\n"
" The bundle file can then be transferred using conventional means and\n"
" applied to another repository with the unbundle or pull command.\n"
" This is useful when direct push and pull are not available or when\n"
" exporting an entire repository is undesirable.\n"
"\n"
" Applying bundles preserves all changeset contents including\n"
" permissions, copy/rename information, and revision history.\n"
" "
msgstr ""
msgid "--base is incompatible with specifiying a destination"
msgstr ""
msgid "unknown bundle type specified with --type"
msgstr ""
msgid ""
"output the current or given revision of files\n"
"\n"
" Print the specified files as they were at the given revision.\n"
" If no revision is given, the parent of the working directory is used,\n"
" or tip if no revision is checked out.\n"
"\n"
" Output may be to a file, in which case the name of the file is\n"
" given using a format string. The formatting rules are the same as\n"
" for the export command, with the following additions:\n"
"\n"
" %s basename of file being printed\n"
" %d dirname of file being printed, or '.' if in repo root\n"
" %p root-relative path name of file being printed\n"
" "
msgstr ""
msgid ""
"make a copy of an existing repository\n"
"\n"
" Create a copy of an existing repository in a new directory.\n"
"\n"
" If no destination directory name is specified, it defaults to the\n"
" basename of the source.\n"
"\n"
" The location of the source is added to the new repository's\n"
" .hg/hgrc file, as the default to be used for future pulls.\n"
"\n"
" For efficiency, hardlinks are used for cloning whenever the source\n"
" and destination are on the same filesystem (note this applies only\n"
" to the repository data, not to the checked out files). Some\n"
" filesystems, such as AFS, implement hardlinking incorrectly, but\n"
" do not report errors. In these cases, use the --pull option to\n"
" avoid hardlinking.\n"
"\n"
" In some cases, you can clone repositories and checked out files\n"
" using full hardlinks with\n"
"\n"
" $ cp -al REPO REPOCLONE\n"
"\n"
" This is the fastest way to clone, but it is not always safe. The\n"
" operation is not atomic (making sure REPO is not modified during\n"
" the operation is up to you) and you have to make sure your editor\n"
" breaks hardlinks (Emacs and most Linux Kernel tools do so). Also,\n"
" this is not compatible with certain extensions that place their\n"
" metadata under the .hg directory, such as mq.\n"
"\n"
" If you use the -r option to clone up to a specific revision, no\n"
" subsequent revisions will be present in the cloned repository.\n"
" This option implies --pull, even on local repositories.\n"
"\n"
" If the -U option is used, the new clone will contain only a repository\n"
" (.hg) and no working copy (the working copy parent is the null "
"revision).\n"
"\n"
" See pull for valid source format details.\n"
"\n"
" It is possible to specify an ssh:// URL as the destination, but no\n"
" .hg/hgrc and working directory will be created on the remote side.\n"
" Look at the help text for the pull command for important details\n"
" about ssh:// URLs.\n"
" "
msgstr ""
msgid ""
"commit the specified files or all outstanding changes\n"
"\n"
" Commit changes to the given files into the repository.\n"
"\n"
" If a list of files is omitted, all changes reported by \"hg status\"\n"
" will be committed.\n"
"\n"
" If you are committing the result of a merge, do not provide any\n"
" file names or -I/-X filters.\n"
"\n"
" If no commit message is specified, the configured editor is started to\n"
" enter a message.\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
" "
msgstr ""
msgid "created new head\n"
msgstr "lavede et nyt hoved\n"
msgid "committed changeset %d:%s\n"
msgstr ""
msgid ""
"mark files as copied for the next commit\n"
"\n"
" Mark dest as having copies of source files. If dest is a\n"
" directory, copies are put in that directory. If dest is a file,\n"
" there can only be one source.\n"
"\n"
" By default, this command copies the contents of files as they\n"
" stand in the working directory. If invoked with --after, the\n"
" operation is recorded, but no copying is performed.\n"
"\n"
" This command takes effect in the next commit. To undo a copy\n"
" before that, see hg revert.\n"
" "
msgstr ""
msgid "find the ancestor revision of two revisions in a given index"
msgstr ""
msgid "There is no Mercurial repository here (.hg not found)"
msgstr "Der er ikke noget Mercurial arkiv her (fandt ikke .hg)"
msgid "either two or three arguments required"
msgstr "kræver enten to eller tre argumenter"
msgid "returns the completion list associated with the given command"
msgstr ""
msgid "rebuild the dirstate as it would look like for the given revision"
msgstr ""
msgid "validate the correctness of the current dirstate"
msgstr ""
msgid "%s in state %s, but not in manifest1\n"
msgstr ""
msgid "%s in state %s, but also in manifest1\n"
msgstr ""
msgid "%s in state %s, but not in either manifest\n"
msgstr ""
msgid "%s in manifest1, but listed as state %s"
msgstr ""
msgid ".hg/dirstate inconsistent with current parent's manifest"
msgstr ""
msgid ""
"show combined config settings from all hgrc files\n"
"\n"
" With no args, print names and values of all config items.\n"
"\n"
" With one arg of the form section.name, print just the value of\n"
" that config item.\n"
"\n"
" With multiple args, print names and values of all config items\n"
" with matching section names."
msgstr ""
msgid "only one config item permitted"
msgstr ""
msgid ""
"manually set the parents of the current working directory\n"
"\n"
" This is useful for writing repository conversion tools, but should\n"
" be used with care.\n"
" "
msgstr ""
msgid "show the contents of the current dirstate"
msgstr ""
msgid "copy: %s -> %s\n"
msgstr "kopi: %s -> %s\n"
msgid "dump the contents of a data file revision"
msgstr ""
msgid "invalid revision identifier %s"
msgstr "ugyldig revisionsidentification %s"
msgid "parse and display a date"
msgstr ""
msgid "dump the contents of an index file"
msgstr ""
msgid "dump an index DAG as a .dot file"
msgstr ""
msgid "test Mercurial installation"
msgstr ""
msgid "Checking encoding (%s)...\n"
msgstr ""
msgid " (check that your locale is properly set)\n"
msgstr ""
msgid "Checking extensions...\n"
msgstr ""
msgid " One or more extensions could not be found"
msgstr ""
msgid " (check that you compiled the extensions)\n"
msgstr ""
msgid "Checking templates...\n"
msgstr ""
msgid " (templates seem to have been installed incorrectly)\n"
msgstr ""
msgid "Checking patch...\n"
msgstr ""
msgid " patch call failed:\n"
msgstr ""
msgid " unexpected patch output!\n"
msgstr ""
msgid " patch test failed!\n"
msgstr ""
msgid ""
" (Current patch tool may be incompatible with patch, or misconfigured. "
"Please check your .hgrc file)\n"
msgstr ""
msgid ""
" Internal patcher failure, please report this error to http://www.selenic."
"com/mercurial/bts\n"
msgstr ""
msgid "Checking commit editor...\n"
msgstr ""
msgid " No commit editor set and can't find vi in PATH\n"
msgstr ""
msgid " (specify a commit editor in your .hgrc file)\n"
msgstr ""
msgid " Can't find editor '%s' in PATH\n"
msgstr ""
msgid "Checking username...\n"
msgstr ""
msgid " (specify a username in your .hgrc file)\n"
msgstr ""
msgid "No problems detected\n"
msgstr "Fandt ingen problemer\n"
msgid "%s problems detected, please check your install!\n"
msgstr ""
msgid "dump rename information"
msgstr ""
msgid "%s renamed from %s:%s\n"
msgstr "%s omdøbt fra %s:%s\n"
msgid "%s not renamed\n"
msgstr "%s ikke omdøbt\n"
msgid "show how files match on given patterns"
msgstr ""
msgid ""
"diff repository (or selected files)\n"
"\n"
" Show differences between revisions for the specified files.\n"
"\n"
" Differences between files are shown using the unified diff format.\n"
"\n"
" NOTE: diff may generate unexpected results for merges, as it will\n"
" default to comparing against the working directory's first parent\n"
" changeset if no revisions are specified.\n"
"\n"
" When two revision arguments are given, then changes are shown\n"
" between those revisions. If only one revision is specified then\n"
" that revision is compared to the working directory, and, when no\n"
" revisions are specified, the working directory files are compared\n"
" to its parent.\n"
"\n"
" Without the -a option, diff will avoid generating diffs of files\n"
" it detects as binary. With -a, diff will generate a diff anyway,\n"
" probably with undesirable results.\n"
"\n"
" Use the --git option to generate diffs in the git extended diff\n"
" format. Read the diffs help topic for more information.\n"
" "
msgstr ""
msgid "cannot specify --rev and --change at the same time"
msgstr ""
msgid ""
"dump the header and diffs for one or more changesets\n"
"\n"
" Print the changeset header and diffs for one or more revisions.\n"
"\n"
" The information shown in the changeset header is: author,\n"
" changeset hash, parent(s) and commit comment.\n"
"\n"
" NOTE: export may generate unexpected diff output for merge changesets,\n"
" as it will compare the merge changeset against its first parent only.\n"
"\n"
" Output may be to a file, in which case the name of the file is\n"
" given using a format string. The formatting rules are as follows:\n"
"\n"
" %% literal \"%\" character\n"
" %H changeset hash (40 bytes of hexadecimal)\n"
" %N number of patches being generated\n"
" %R changeset revision number\n"
" %b basename of the exporting repository\n"
" %h short-form changeset hash (12 bytes of hexadecimal)\n"
" %n zero-padded sequence number, starting at 1\n"
" %r zero-padded changeset revision number\n"
"\n"
" Without the -a option, export will avoid generating diffs of files\n"
" it detects as binary. With -a, export will generate a diff anyway,\n"
" probably with undesirable results.\n"
"\n"
" Use the --git option to generate diffs in the git extended diff\n"
" format. Read the diffs help topic for more information.\n"
"\n"
" With the --switch-parent option, the diff will be against the second\n"
" parent. It can be useful to review a merge.\n"
" "
msgstr ""
msgid "export requires at least one changeset"
msgstr ""
msgid "exporting patches:\n"
msgstr ""
msgid "exporting patch:\n"
msgstr ""
msgid ""
"search for a pattern in specified files and revisions\n"
"\n"
" Search revisions of files for a regular expression.\n"
"\n"
" This command behaves differently than Unix grep. It only accepts\n"
" Python/Perl regexps. It searches repository history, not the\n"
" working directory. It always prints the revision number in which\n"
" a match appears.\n"
"\n"
" By default, grep only prints output for the first revision of a\n"
" file in which it finds a match. To get it to print every revision\n"
" that contains a change in match status (\"-\" for a match that\n"
" becomes a non-match, or \"+\" for a non-match that becomes a match),\n"
" use the --all flag.\n"
" "
msgstr ""
msgid "grep: invalid match pattern: %s\n"
msgstr ""
msgid ""
"show current repository heads or show branch heads\n"
"\n"
" With no arguments, show all repository head changesets.\n"
"\n"
" If branch or revisions names are given this will show the heads of\n"
" the specified branches or the branches those revisions are tagged\n"
" with.\n"
"\n"
" Repository \"heads\" are changesets that don't have child\n"
" changesets. They are where development generally takes place and\n"
" are the usual targets for update and merge operations.\n"
"\n"
" Branch heads are changesets that have a given branch tag, but have\n"
" no child changesets with that tag. They are usually where\n"
" development on the given branch takes place.\n"
" "
msgstr ""
msgid "no changes on branch %s containing %s are reachable from %s\n"
msgstr ""
msgid "no changes on branch %s are reachable from %s\n"
msgstr ""
msgid ""
"show help for a given topic or a help overview\n"
"\n"
" With no arguments, print a list of commands and short help.\n"
"\n"
" Given a topic, extension, or command name, print help for that topic."
msgstr ""
msgid "global options:"
msgstr ""
msgid "use \"hg help\" for the full list of commands"
msgstr "brug \"hg help\" for den fulde liste af kommandoer"
msgid "use \"hg help\" for the full list of commands or \"hg -v\" for details"
msgstr ""
"brug \"hg help\" for den fulde liste af kommandoer eller \"hg -v\" for "
"detaljer"
msgid "use \"hg -v help%s\" to show aliases and global options"
msgstr "brug \"hg -v help%s\" for at vise aliaser og globale valgmuligheder"
msgid "use \"hg -v help %s\" to show global options"
msgstr "brug \"hg -v help %s\" for at vise globale valgmuligheder"
msgid ""
"list of commands:\n"
"\n"
msgstr ""
"liste af kommandoer:\n"
"\n"
msgid ""
"\n"
"aliases: %s\n"
msgstr ""
"\n"
"aliaser %s:\n"
msgid "(no help text available)"
msgstr "(ingen hjælpetekst tilgængelig)"
msgid "options:\n"
msgstr "valgmuligheder:\n"
msgid "no commands defined\n"
msgstr "ingen kommandoer defineret\n"
msgid ""
"\n"
"enabled extensions:\n"
"\n"
msgstr ""
"\n"
"aktiverede udvidelser:\n"
"\n"
msgid " %s %s\n"
msgstr ""
msgid "no help text available"
msgstr "ingen hjælpetekst tilgængelig"
msgid "%s extension - %s\n"
msgstr ""
msgid "Mercurial Distributed SCM\n"
msgstr "Mercurial Distribueret SCM\n"
msgid ""
"basic commands:\n"
"\n"
msgstr ""
"basale kommandoer:\n"
"\n"
msgid ""
"\n"
"additional help topics:\n"
"\n"
msgstr ""
"\n"
"yderligere hjælpeemner:\n"
"\n"
msgid ""
"identify the working copy or specified revision\n"
"\n"
" With no revision, print a summary of the current state of the repo.\n"
"\n"
" With a path, do a lookup in another repository.\n"
"\n"
" This summary identifies the repository state using one or two parent\n"
" hash identifiers, followed by a \"+\" if there are uncommitted changes\n"
" in the working directory, a list of tags for this revision and a branch\n"
" name for non-default branches.\n"
" "
msgstr ""
msgid ""
"import an ordered set of patches\n"
"\n"
" Import a list of patches and commit them individually.\n"
"\n"
" If there are outstanding changes in the working directory, import\n"
" will abort unless given the -f flag.\n"
"\n"
" You can import a patch straight from a mail message. Even patches\n"
" as attachments work (body part must be type text/plain or\n"
" text/x-patch to be used). From and Subject headers of email\n"
" message are used as default committer and commit message. All\n"
" text/plain body parts before first diff are added to commit\n"
" message.\n"
"\n"
" If the imported patch was generated by hg export, user and description\n"
" from patch override values from message headers and body. Values\n"
" given on command line with -m and -u override these.\n"
"\n"
" If --exact is specified, import will set the working directory\n"
" to the parent of each patch before applying it, and will abort\n"
" if the resulting changeset has a different ID than the one\n"
" recorded in the patch. This may happen due to character set\n"
" problems or other deficiencies in the text patch format.\n"
"\n"
" With --similarity, hg will attempt to discover renames and copies\n"
" in the patch in the same way as 'addremove'.\n"
"\n"
" To read a patch from standard input, use patch name \"-\".\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
" "
msgstr ""
msgid "applying patch from stdin\n"
msgstr ""
msgid "no diffs found"
msgstr ""
msgid ""
"message:\n"
"%s\n"
msgstr ""
"meddelse:\n"
"%s\n"
msgid "not a mercurial patch"
msgstr ""
msgid "patch is damaged or loses information"
msgstr ""
msgid ""
"show new changesets found in source\n"
"\n"
" Show new changesets found in the specified path/URL or the default\n"
" pull location. These are the changesets that would be pulled if a pull\n"
" was requested.\n"
"\n"
" For remote repository, using --bundle avoids downloading the changesets\n"
" twice if the incoming is followed by a pull.\n"
"\n"
" See pull for valid source format details.\n"
" "
msgstr ""
msgid ""
"create a new repository in the given directory\n"
"\n"
" Initialize a new repository in the given directory. If the given\n"
" directory does not exist, it is created.\n"
"\n"
" If no directory is given, the current directory is used.\n"
"\n"
" It is possible to specify an ssh:// URL as the destination.\n"
" Look at the help text for the pull command for important details\n"
" about ssh:// URLs.\n"
" "
msgstr ""
msgid ""
"locate files matching specific patterns\n"
"\n"
" Print all files under Mercurial control whose names match the\n"
" given patterns.\n"
"\n"
" This command searches the entire repository by default. To search\n"
" just the current directory and its subdirectories, use\n"
" \"--include .\".\n"
"\n"
" If no patterns are given to match, this command prints all file\n"
" names.\n"
"\n"
" If you want to feed the output of this command into the \"xargs\"\n"
" command, use the \"-0\" option to both this command and \"xargs\".\n"
" This will avoid the problem of \"xargs\" treating single filenames\n"
" that contain white space as multiple filenames.\n"
" "
msgstr ""
msgid ""
"show revision history of entire repository or files\n"
"\n"
" Print the revision history of the specified files or the entire\n"
" project.\n"
"\n"
" File history is shown without following rename or copy history of\n"
" files. Use -f/--follow with a file name to follow history across\n"
" renames and copies. --follow without a file name will only show\n"
" ancestors or descendants of the starting revision. --follow-first\n"
" only follows the first parent of merge revisions.\n"
"\n"
" If no revision range is specified, the default is tip:0 unless\n"
" --follow is set, in which case the working directory parent is\n"
" used as the starting revision.\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
"\n"
" By default this command outputs: changeset id and hash, tags,\n"
" non-trivial parents, user, date and time, and a summary for each\n"
" commit. When the -v/--verbose switch is used, the list of changed\n"
" files and full commit message is shown.\n"
"\n"
" NOTE: log -p may generate unexpected diff output for merge\n"
" changesets, as it will compare the merge changeset against its\n"
" first parent only. Also, the files: list will only reflect files\n"
" that are different from BOTH parents.\n"
"\n"
" "
msgstr ""
msgid ""
"looks up all renames for a file (up to endrev) the first\n"
" time the file is given. It indexes on the changerev and only\n"
" parses the manifest if linkrev != changerev.\n"
" Returns rename info for fn at changerev rev."
msgstr ""
msgid ""
"output the current or given revision of the project manifest\n"
"\n"
" Print a list of version controlled files for the given revision.\n"
" If no revision is given, the parent of the working directory is used,\n"
" or tip if no revision is checked out.\n"
"\n"
" The manifest is the list of files being version controlled. If no "
"revision\n"
" is given then the first parent of the working directory is used.\n"
"\n"
" With -v flag, print file permissions, symlink and executable bits. With\n"
" --debug flag, print file revision hashes.\n"
" "
msgstr ""
msgid ""
"merge working directory with another revision\n"
"\n"
" Merge the contents of the current working directory and the\n"
" requested revision. Files that changed between either parent are\n"
" marked as changed for the next commit and a commit must be\n"
" performed before any further updates are allowed.\n"
"\n"
" If no revision is specified, the working directory's parent is a\n"
" head revision, and the current branch contains exactly one other head,\n"
" the other head is merged with by default. Otherwise, an explicit\n"
" revision to merge with must be provided.\n"
" "
msgstr ""
msgid "branch '%s' has %d heads - please merge with an explicit rev"
msgstr ""
msgid "branch '%s' has one head - please merge with an explicit rev"
msgstr ""
msgid "there is nothing to merge"
msgstr ""
msgid "%s - use \"hg update\" instead"
msgstr "%s - brug \"hg update\" istedet"
msgid ""
"working dir not at a head rev - use \"hg update\" or merge with an explicit "
"rev"
msgstr ""
msgid ""
"show changesets not found in destination\n"
"\n"
" Show changesets not found in the specified destination repository or\n"
" the default push location. These are the changesets that would be "
"pushed\n"
" if a push was requested.\n"
"\n"
" See pull for valid destination format details.\n"
" "
msgstr ""
msgid ""
"show the parents of the working dir or revision\n"
"\n"
" Print the working directory's parent revisions. If a\n"
" revision is given via --rev, the parent of that revision\n"
" will be printed. If a file argument is given, revision in\n"
" which the file was last changed (before the working directory\n"
" revision or the argument to --rev if given) is printed.\n"
" "
msgstr ""
msgid "can only specify an explicit file name"
msgstr ""
msgid "'%s' not found in manifest!"
msgstr ""
msgid ""
"show definition of symbolic path names\n"
"\n"
" Show definition of symbolic path name NAME. If no name is given, show\n"
" definition of available names.\n"
"\n"
" Path names are defined in the [paths] section of /etc/mercurial/hgrc\n"
" and $HOME/.hgrc. If run inside a repository, .hg/hgrc is used, too.\n"
" "
msgstr ""
msgid "not found!\n"
msgstr "ikke fundet!\n"
msgid "not updating, since new heads added\n"
msgstr "opdaterer ikke idet nye hoveder er tilføjet\n"
msgid "(run 'hg heads' to see heads, 'hg merge' to merge)\n"
msgstr "(kør 'hg heads' for at se hoveder, 'hg merge' for at sammenføje)\n"
msgid "(run 'hg update' to get a working copy)\n"
msgstr "(kør 'hg update' for at få en arbejdskopi)\n"
msgid ""
"pull changes from the specified source\n"
"\n"
" Pull changes from a remote repository to a local one.\n"
"\n"
" This finds all changes from the repository at the specified path\n"
" or URL and adds them to the local repository. By default, this\n"
" does not update the copy of the project in the working directory.\n"
"\n"
" Valid URLs are of the form:\n"
"\n"
" local/filesystem/path (or file://local/filesystem/path)\n"
" http://[user[:pass]@]host[:port]/[path]\n"
" https://[user[:pass]@]host[:port]/[path]\n"
" ssh://[user[:pass]@]host[:port]/[path]\n"
"\n"
" Paths in the local filesystem can either point to Mercurial\n"
" repositories or to bundle files (as created by 'hg bundle' or\n"
" 'hg incoming --bundle').\n"
"\n"
" An optional identifier after # indicates a particular branch, tag,\n"
" or changeset to pull.\n"
"\n"
" Some notes about using SSH with Mercurial:\n"
" - SSH requires an accessible shell account on the destination machine\n"
" and a copy of hg in the remote path or specified with as remotecmd.\n"
" - path is relative to the remote user's home directory by default.\n"
" Use an extra slash at the start of a path to specify an absolute "
"path:\n"
" ssh://example.com//tmp/repository\n"
" - Mercurial doesn't use its own compression via SSH; the right thing\n"
" to do is to configure it in your ~/.ssh/config, e.g.:\n"
" Host *.mylocalnetwork.example.com\n"
" Compression no\n"
" Host *\n"
" Compression yes\n"
" Alternatively specify \"ssh -C\" as your ssh command in your hgrc or\n"
" with the --ssh command line option.\n"
" "
msgstr ""
msgid ""
"Other repository doesn't support revision lookup, so a rev cannot be "
"specified."
msgstr ""
msgid ""
"push changes to the specified destination\n"
"\n"
" Push changes from the local repository to the given destination.\n"
"\n"
" This is the symmetrical operation for pull. It helps to move\n"
" changes from the current repository to a different one. If the\n"
" destination is local this is identical to a pull in that directory\n"
" from the current one.\n"
"\n"
" By default, push will refuse to run if it detects the result would\n"
" increase the number of remote heads. This generally indicates the\n"
" the client has forgotten to pull and merge before pushing.\n"
"\n"
" Valid URLs are of the form:\n"
"\n"
" local/filesystem/path (or file://local/filesystem/path)\n"
" ssh://[user[:pass]@]host[:port]/[path]\n"
" http://[user[:pass]@]host[:port]/[path]\n"
" https://[user[:pass]@]host[:port]/[path]\n"
"\n"
" An optional identifier after # indicates a particular branch, tag,\n"
" or changeset to push. If -r is used, the named changeset and all its\n"
" ancestors will be pushed to the remote repository.\n"
"\n"
" Look at the help text for the pull command for important details\n"
" about ssh:// URLs.\n"
"\n"
" Pushing to http:// and https:// URLs is only possible, if this\n"
" feature is explicitly enabled on the remote Mercurial server.\n"
" "
msgstr ""
msgid "pushing to %s\n"
msgstr "skubber til %s\n"
msgid ""
"raw commit interface (DEPRECATED)\n"
"\n"
" (DEPRECATED)\n"
" Lowlevel commit, for use in helper scripts.\n"
"\n"
" This command is not intended to be used by normal users, as it is\n"
" primarily useful for importing from other SCMs.\n"
"\n"
" This command is now deprecated and will be removed in a future\n"
" release, please use debugsetparents and commit instead.\n"
" "
msgstr ""
msgid "(the rawcommit command is deprecated)\n"
msgstr ""
msgid ""
"roll back an interrupted transaction\n"
"\n"
" Recover from an interrupted commit or pull.\n"
"\n"
" This command tries to fix the repository status after an interrupted\n"
" operation. It should only be necessary when Mercurial suggests it.\n"
" "
msgstr ""
msgid ""
"remove the specified files on the next commit\n"
"\n"
" Schedule the indicated files for removal from the repository.\n"
"\n"
" This only removes files from the current branch, not from the entire\n"
" project history. -A can be used to remove only files that have already\n"
" been deleted, -f can be used to force deletion, and -Af can be used\n"
" to remove files from the next revision without deleting them.\n"
"\n"
" The following table details the behavior of remove for different file\n"
" states (columns) and option combinations (rows). The file states are\n"
" Added, Clean, Modified and Missing (as reported by hg status). The\n"
" actions are Warn, Remove (from branch) and Delete (from disk).\n"
"\n"
" A C M !\n"
" none W RD W R\n"
" -f R RD RD R\n"
" -A W W W R\n"
" -Af R R R R\n"
"\n"
" This command schedules the files to be removed at the next commit.\n"
" To undo a remove before that, see hg revert.\n"
" "
msgstr ""
msgid "no files specified"
msgstr ""
msgid "not removing %s: file %s (use -f to force removal)\n"
msgstr "fjerner ikke %s: filen %s (brug -f for at forcere fjernelsen)\n"
msgid "still exists"
msgstr "eksisterer stadig"
msgid "is modified"
msgstr "er modificeret"
msgid "has been marked for add"
msgstr "er markeret som tilføjet"
msgid ""
"rename files; equivalent of copy + remove\n"
"\n"
" Mark dest as copies of sources; mark sources for deletion. If\n"
" dest is a directory, copies are put in that directory. If dest is\n"
" a file, there can only be one source.\n"
"\n"
" By default, this command copies the contents of files as they\n"
" stand in the working directory. If invoked with --after, the\n"
" operation is recorded, but no copying is performed.\n"
"\n"
" This command takes effect in the next commit. To undo a rename\n"
" before that, see hg revert.\n"
" "
msgstr ""
msgid ""
"retry file merges from a merge or update\n"
"\n"
" This command will cleanly retry unresolved file merges using file\n"
" revisions preserved from the last update or merge. To attempt to\n"
" resolve all unresolved files, use the -a switch.\n"
"\n"
" This command will also allow listing resolved files and manually\n"
" marking and unmarking files as resolved.\n"
"\n"
" The codes used to show the status of files are:\n"
" U = unresolved\n"
" R = resolved\n"
" "
msgstr ""
msgid "too many options specified"
msgstr ""
msgid "can't specify --all and patterns"
msgstr ""
msgid "no files or directories specified; use --all to remerge all files"
msgstr ""
"ingen filer eller mapper specificeret; brug --all for at gen-sammenføje alle "
"filerne"
msgid ""
"restore individual files or dirs to an earlier state\n"
"\n"
" (use update -r to check out earlier revisions, revert does not\n"
" change the working dir parents)\n"
"\n"
" With no revision specified, revert the named files or directories\n"
" to the contents they had in the parent of the working directory.\n"
" This restores the contents of the affected files to an unmodified\n"
" state and unschedules adds, removes, copies, and renames. If the\n"
" working directory has two parents, you must explicitly specify the\n"
" revision to revert to.\n"
"\n"
" Using the -r option, revert the given files or directories to their\n"
" contents as of a specific revision. This can be helpful to \"roll\n"
" back\" some or all of an earlier change.\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
"\n"
" Revert modifies the working directory. It does not commit any\n"
" changes, or change the parent of the working directory. If you\n"
" revert to a revision other than the parent of the working\n"
" directory, the reverted files will thus appear modified\n"
" afterwards.\n"
"\n"
" If a file has been deleted, it is restored. If the executable\n"
" mode of a file was changed, it is reset.\n"
"\n"
" If names are given, all files matching the names are reverted.\n"
" If no arguments are given, no files are reverted.\n"
"\n"
" Modified files are saved with a .orig suffix before reverting.\n"
" To disable these backups, use --no-backup.\n"
" "
msgstr ""
msgid "you can't specify a revision and a date"
msgstr "du kan ikke specificeret en revision og en dato"
msgid "no files or directories specified; use --all to revert the whole repo"
msgstr ""
"ingen filer eller mapper specificeret; brug --all for at føre hele repo'et "
"tilbage"
msgid "forgetting %s\n"
msgstr "glemmer %s\n"
msgid "reverting %s\n"
msgstr "fører %s tilbage\n"
msgid "undeleting %s\n"
msgstr ""
msgid "saving current version of %s as %s\n"
msgstr "gemmer nuværende version af %s som %s\n"
msgid "file not managed: %s\n"
msgstr ""
msgid "no changes needed to %s\n"
msgstr ""
msgid ""
"roll back the last transaction\n"
"\n"
" This command should be used with care. There is only one level of\n"
" rollback, and there is no way to undo a rollback. It will also\n"
" restore the dirstate at the time of the last transaction, losing\n"
" any dirstate changes since that time.\n"
"\n"
" Transactions are used to encapsulate the effects of all commands\n"
" that create new changesets or propagate existing changesets into a\n"
" repository. For example, the following commands are transactional,\n"
" and their effects can be rolled back:\n"
"\n"
" commit\n"
" import\n"
" pull\n"
" push (with this repository as destination)\n"
" unbundle\n"
"\n"
" This command is not intended for use on public repositories. Once\n"
" changes are visible for pull by other users, rolling a transaction\n"
" back locally is ineffective (someone else may already have pulled\n"
" the changes). Furthermore, a race is possible with readers of the\n"
" repository; for example an in-progress pull from the repository\n"
" may fail if a rollback is performed.\n"
" "
msgstr ""
msgid ""
"print the root (top) of the current working dir\n"
"\n"
" Print the root directory of the current repository.\n"
" "
msgstr ""
msgid ""
"export the repository via HTTP\n"
"\n"
" Start a local HTTP repository browser and pull server.\n"
"\n"
" By default, the server logs accesses to stdout and errors to\n"
" stderr. Use the \"-A\" and \"-E\" options to log to files.\n"
" "
msgstr ""
msgid "listening at http://%s%s/%s (bound to %s:%d)\n"
msgstr "lytter på http://%s%s/%s (bundet til %s:%d)\n"
msgid ""
"show changed files in the working directory\n"
"\n"
" Show status of files in the repository. If names are given, only\n"
" files that match are shown. Files that are clean or ignored or\n"
" source of a copy/move operation, are not listed unless -c (clean),\n"
" -i (ignored), -C (copies) or -A is given. Unless options described\n"
" with \"show only ...\" are given, the options -mardu are used.\n"
"\n"
" Option -q/--quiet hides untracked (unknown and ignored) files\n"
" unless explicitly requested with -u/--unknown or -i/-ignored.\n"
"\n"
" NOTE: status may appear to disagree with diff if permissions have\n"
" changed or a merge has occurred. The standard diff format does not\n"
" report permission changes and diff only reports changes relative\n"
" to one merge parent.\n"
"\n"
" If one revision is given, it is used as the base revision.\n"
" If two revisions are given, the difference between them is shown.\n"
"\n"
" The codes used to show the status of files are:\n"
" M = modified\n"
" A = added\n"
" R = removed\n"
" C = clean\n"
" ! = deleted, but still tracked\n"
" ? = not tracked\n"
" I = ignored\n"
" = the previous added file was copied from here\n"
" "
msgstr ""
msgid ""
"add one or more tags for the current or given revision\n"
"\n"
" Name a particular revision using <name>.\n"
"\n"
" Tags are used to name particular revisions of the repository and are\n"
" very useful to compare different revisions, to go back to significant\n"
" earlier versions or to mark branch points as releases, etc.\n"
"\n"
" If no revision is given, the parent of the working directory is used,\n"
" or tip if no revision is checked out.\n"
"\n"
" To facilitate version control, distribution, and merging of tags,\n"
" they are stored as a file named \".hgtags\" which is managed\n"
" similarly to other project files and can be hand-edited if\n"
" necessary. The file '.hg/localtags' is used for local tags (not\n"
" shared among repositories).\n"
"\n"
" See 'hg help dates' for a list of formats valid for -d/--date.\n"
" "
msgstr ""
msgid "tag names must be unique"
msgstr ""
msgid "the name '%s' is reserved"
msgstr ""
msgid "--rev and --remove are incompatible"
msgstr ""
msgid "tag '%s' does not exist"
msgstr ""
msgid "tag '%s' is not a %s tag"
msgstr ""
msgid "Removed tag %s"
msgstr ""
msgid "tag '%s' already exists (use -f to force)"
msgstr ""
msgid "Added tag %s for changeset %s"
msgstr ""
msgid ""
"list repository tags\n"
"\n"
" This lists both regular and local tags. When the -v/--verbose switch\n"
" is used, a third column \"local\" is printed for local tags.\n"
" "
msgstr ""
msgid ""
"show the tip revision\n"
"\n"
" The tip revision (usually just called the tip) is the most\n"
" recently added changeset in the repository, the most recently\n"
" changed head.\n"
"\n"
" If you have just made a commit, that commit will be the tip. If\n"
" you have just pulled changes from another repository, the tip of\n"
" that repository becomes the current tip. The \"tip\" tag is special\n"
" and cannot be renamed or assigned to a different changeset.\n"
" "
msgstr ""
msgid ""
"apply one or more changegroup files\n"
"\n"
" Apply one or more compressed changegroup files generated by the\n"
" bundle command.\n"
" "
msgstr ""
msgid ""
"update working directory\n"
"\n"
" Update the repository's working directory to the specified revision,\n"
" or the tip of the current branch if none is specified. Use null as\n"
" the revision to remove the working copy (like 'hg clone -U').\n"
"\n"
" When the working dir contains no uncommitted changes, it will be\n"
" replaced by the state of the requested revision from the repo. When\n"
" the requested revision is on a different branch, the working dir\n"
" will additionally be switched to that branch.\n"
"\n"
" When there are uncommitted changes, use option -C to discard them,\n"
" forcibly replacing the state of the working dir with the requested\n"
" revision.\n"
"\n"
" When there are uncommitted changes and option -C is not used, and\n"
" the parent revision and requested revision are on the same branch,\n"
" and one of them is an ancestor of the other, then the new working\n"
" directory will contain the requested revision merged with the\n"
" uncommitted changes. Otherwise, the update will fail with a\n"
" suggestion to use 'merge' or 'update -C' instead.\n"
"\n"
" If you want to update just one file to an older revision, use revert.\n"
"\n"
" See 'hg help dates' for a list of formats valid for --date.\n"
" "
msgstr ""
msgid ""
"verify the integrity of the repository\n"
"\n"
" Verify the integrity of the current repository.\n"
"\n"
" This will perform an extensive check of the repository's\n"
" integrity, validating the hashes and checksums of each entry in\n"
" the changelog, manifest, and tracked files, as well as the\n"
" integrity of their crosslinks and indices.\n"
" "
msgstr ""
msgid "output version and copyright information"
msgstr ""
msgid "Mercurial Distributed SCM (version %s)\n"
msgstr "Mercurial Distributed SCM (version %s)\n"
msgid ""
"\n"
"Copyright (C) 2005-2008 Matt Mackall <mpm@selenic.com> and others\n"
"This is free software; see the source for copying conditions. There is NO\n"
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
msgstr ""
msgid "repository root directory or symbolic path name"
msgstr ""
msgid "change working directory"
msgstr "skift arbejdsbibliotek"
msgid "do not prompt, assume 'yes' for any required answers"
msgstr "spørg ikke, antag alle svar er 'ja'"
msgid "suppress output"
msgstr "undertryk output"
msgid "enable additional output"
msgstr ""
msgid "set/override config option"
msgstr ""
msgid "enable debugging output"
msgstr ""
msgid "start debugger"
msgstr ""
msgid "set the charset encoding"
msgstr ""
msgid "set the charset encoding mode"
msgstr ""
msgid "print improved command execution profile"
msgstr ""
msgid "print traceback on exception"
msgstr ""
msgid "time how long the command takes"
msgstr ""
msgid "print command execution profile"
msgstr ""
msgid "output version information and exit"
msgstr ""
msgid "display help and exit"
msgstr ""
msgid "do not perform actions, just print output"
msgstr "udfør ingen handlinger, udskriv kun outputttet"
msgid "specify ssh command to use"
msgstr "specificer ssh kommandoen som skal bruges"
msgid "specify hg command to run on the remote side"
msgstr ""
msgid "include names matching the given patterns"
msgstr "inkluder navne som matcher det givne mønster"
msgid "exclude names matching the given patterns"
msgstr "ekskluder navne som matcher det givne mønster"
msgid "use <text> as commit message"
msgstr "brug <tekst> som commit-besked"
msgid "read commit message from <file>"
msgstr "læs commit-beskeden fra <fil>"
msgid "record datecode as commit date"
msgstr ""
msgid "record user as committer"
msgstr ""
msgid "display using template map file"
msgstr ""
msgid "display with template"
msgstr ""
msgid "do not show merges"
msgstr ""
msgid "treat all files as text"
msgstr "behandl alle filer som tekst"
msgid "don't include dates in diff headers"
msgstr ""
msgid "show which function each change is in"
msgstr ""
msgid "ignore white space when comparing lines"
msgstr ""
msgid "ignore changes in the amount of white space"
msgstr ""
msgid "ignore changes whose lines are all blank"
msgstr ""
msgid "number of lines of context to show"
msgstr ""
msgid "guess renamed files by similarity (0<=s<=100)"
msgstr ""
msgid "[OPTION]... [FILE]..."
msgstr ""
msgid "annotate the specified revision"
msgstr ""
msgid "follow file copies and renames"
msgstr ""
msgid "list the author (long with -v)"
msgstr ""
msgid "list the date (short with -q)"
msgstr ""
msgid "list the revision number (default)"
msgstr ""
msgid "list the changeset"
msgstr ""
msgid "show line number at the first appearance"
msgstr ""
msgid "[-r REV] [-f] [-a] [-u] [-d] [-n] [-c] [-l] FILE..."
msgstr ""
msgid "do not pass files through decoders"
msgstr ""
msgid "directory prefix for files in archive"
msgstr ""
msgid "revision to distribute"
msgstr ""
msgid "type of distribution to create"
msgstr ""
msgid "[OPTION]... DEST"
msgstr ""
msgid "merge with old dirstate parent after backout"
msgstr ""
msgid "parent to choose when backing out merge"
msgstr ""
msgid "revision to backout"
msgstr ""
msgid "[OPTION]... [-r] REV"
msgstr ""
msgid "reset bisect state"
msgstr "nulstil bisect"
msgid "mark changeset good"
msgstr "marker ændring som god"
msgid "mark changeset bad"
msgstr "marker ændring som dårlig"
msgid "skip testing changeset"
msgstr ""
msgid "use command to check changeset state"
msgstr ""
msgid "do not update to target"
msgstr ""
msgid "[-gbsr] [-c CMD] [REV]"
msgstr ""
msgid "set branch name even if it shadows an existing branch"
msgstr ""
msgid "reset branch name to parent branch name"
msgstr ""
msgid "[-fC] [NAME]"
msgstr ""
msgid "show only branches that have unmerged heads"
msgstr ""
msgid "[-a]"
msgstr ""
msgid "run even when remote repository is unrelated"
msgstr ""
msgid "a changeset up to which you would like to bundle"
msgstr ""
msgid "a base changeset to specify instead of a destination"
msgstr ""
msgid "bundle all changesets in the repository"
msgstr ""
msgid "bundle compression type to use"
msgstr ""
msgid "[-f] [-a] [-r REV]... [--base REV]... FILE [DEST]"
msgstr ""
msgid "print output to file with formatted name"
msgstr ""
msgid "print the given revision"
msgstr ""
msgid "apply any matching decode filter"
msgstr ""
msgid "[OPTION]... FILE..."
msgstr ""
msgid "the clone will only contain a repository (no working copy)"
msgstr ""
msgid "a changeset you would like to have after cloning"
msgstr ""
msgid "[OPTION]... SOURCE [DEST]"
msgstr ""
msgid "mark new/missing files as added/removed before committing"
msgstr ""
msgid "mark a branch as closed, hiding it from the branch list"
msgstr ""
msgid "record a copy that has already occurred"
msgstr ""
msgid "forcibly copy over an existing managed file"
msgstr ""
msgid "[OPTION]... [SOURCE]... DEST"
msgstr ""
msgid "[INDEX] REV1 REV2"
msgstr ""
msgid "show the command options"
msgstr ""
msgid "[-o] CMD"
msgstr ""
msgid "try extended date formats"
msgstr ""
msgid "[-e] DATE [RANGE]"
msgstr ""
msgid "FILE REV"
msgstr ""
msgid "[PATH]"
msgstr ""
msgid "FILE"
msgstr ""
msgid "parent"
msgstr ""
msgid "file list"
msgstr ""
msgid "revision to rebuild to"
msgstr ""
msgid "[-r REV] [REV]"
msgstr ""
msgid "revision to debug"
msgstr ""
msgid "[-r REV] FILE"
msgstr ""
msgid "REV1 [REV2]"
msgstr ""
msgid "do not display the saved mtime"
msgstr ""
msgid "[OPTION]..."
msgstr ""
msgid "change made by revision"
msgstr ""
msgid "[OPTION]... [-r REV1 [-r REV2]] [FILE]..."
msgstr ""
msgid "diff against the second parent"
msgstr ""
msgid "[OPTION]... [-o OUTFILESPEC] REV..."
msgstr ""
msgid "end fields with NUL"
msgstr ""
msgid "print all revisions that match"
msgstr ""
msgid "follow changeset history, or file history across copies and renames"
msgstr ""
msgid "ignore case when matching"
msgstr ""
msgid "print only filenames and revs that match"
msgstr ""
msgid "print matching line numbers"
msgstr ""
msgid "search in given revision range"
msgstr ""
msgid "[OPTION]... PATTERN [FILE]..."
msgstr ""
msgid "show only heads which are descendants of rev"
msgstr ""
msgid "show only the active heads from open branches"
msgstr ""
msgid "[-r REV] [REV]..."
msgstr ""
msgid "[TOPIC]"
msgstr ""
msgid "identify the specified rev"
msgstr ""
msgid "show local revision number"
msgstr ""
msgid "show global revision id"
msgstr ""
msgid "show branch"
msgstr ""
msgid "show tags"
msgstr ""
msgid "[-nibt] [-r REV] [SOURCE]"
msgstr ""
msgid ""
"directory strip option for patch. This has the same\n"
"meaning as the corresponding patch option"
msgstr ""
msgid "base path"
msgstr ""
msgid "skip check for outstanding uncommitted changes"
msgstr ""
msgid "don't commit, just update the working directory"
msgstr ""
msgid "apply patch to the nodes from which it was generated"
msgstr ""
msgid "Use any branch information in patch (implied by --exact)"
msgstr ""
msgid "[OPTION]... PATCH..."
msgstr ""
msgid "show newest record first"
msgstr ""
msgid "file to store the bundles into"
msgstr ""
msgid "a specific revision up to which you would like to pull"
msgstr ""
msgid "[-p] [-n] [-M] [-f] [-r REV]... [--bundle FILENAME] [SOURCE]"
msgstr ""
msgid "[-e CMD] [--remotecmd CMD] [DEST]"
msgstr ""
msgid "search the repository as it stood at rev"
msgstr ""
msgid "end filenames with NUL, for use with xargs"
msgstr ""
msgid "print complete paths from the filesystem root"
msgstr ""
msgid "[OPTION]... [PATTERN]..."
msgstr ""
msgid "only follow the first parent of merge changesets"
msgstr ""
msgid "show revs matching date spec"
msgstr ""
msgid "show copied files"
msgstr ""
msgid "do case-insensitive search for a keyword"
msgstr ""
msgid "include revs where files were removed"
msgstr ""
msgid "show only merges"
msgstr ""
msgid "revs committed by user"
msgstr ""
msgid "show only changesets within the given named branch"
msgstr ""
msgid "do not display revision or any of its ancestors"
msgstr ""
msgid "[OPTION]... [FILE]"
msgstr ""
msgid "revision to display"
msgstr ""
msgid "[-r REV]"
msgstr ""
msgid "force a merge with outstanding changes"
msgstr ""
msgid "revision to merge"
msgstr ""
msgid "[-f] [[-r] REV]"
msgstr ""
msgid "a specific revision up to which you would like to push"
msgstr ""
msgid "[-M] [-p] [-n] [-f] [-r REV]... [DEST]"
msgstr ""
msgid "show parents from the specified rev"
msgstr ""
msgid "hg parents [-r REV] [FILE]"
msgstr ""
msgid "[NAME]"
msgstr ""
msgid "update to new tip if changesets were pulled"
msgstr ""
msgid "[-u] [-f] [-r REV]... [-e CMD] [--remotecmd CMD] [SOURCE]"
msgstr ""
msgid "force push"
msgstr ""
msgid "[-f] [-r REV]... [-e CMD] [--remotecmd CMD] [DEST]"
msgstr ""
msgid "record delete for missing files"
msgstr ""
msgid "remove (and delete) file even if added or modified"
msgstr ""
msgid "record a rename that has already occurred"
msgstr ""
msgid "[OPTION]... SOURCE... DEST"
msgstr ""
msgid "remerge all unresolved files"
msgstr ""
msgid "list state of files needing merge"
msgstr ""
msgid "mark files as resolved"
msgstr ""
msgid "unmark files as resolved"
msgstr ""
msgid "revert all changes when no arguments given"
msgstr ""
msgid "tipmost revision matching date"
msgstr ""
msgid "revision to revert to"
msgstr ""
msgid "do not save backup copies of files"
msgstr ""
msgid "[OPTION]... [-r REV] [NAME]..."
msgstr ""
msgid "name of access log file to write to"
msgstr ""
msgid "name of error log file to write to"
msgstr ""
msgid "port to listen on (default: 8000)"
msgstr ""
msgid "address to listen on (default: all interfaces)"
msgstr ""
msgid "prefix path to serve from (default: server root)"
msgstr ""
msgid "name to show in web pages (default: working dir)"
msgstr ""
msgid "name of the webdir config file (serve more than one repo)"
msgstr ""
msgid "for remote clients"
msgstr ""
msgid "web templates to use"
msgstr ""
msgid "template style to use"
msgstr ""
msgid "use IPv6 in addition to IPv4"
msgstr ""
msgid "SSL certificate file"
msgstr ""
msgid "show untrusted configuration options"
msgstr ""
msgid "[-u] [NAME]..."
msgstr ""
msgid "show status of all files"
msgstr ""
msgid "show only modified files"
msgstr ""
msgid "show only added files"
msgstr ""
msgid "show only removed files"
msgstr ""
msgid "show only deleted (but tracked) files"
msgstr ""
msgid "show only files without changes"
msgstr ""
msgid "show only unknown (not tracked) files"
msgstr ""
msgid "show only ignored files"
msgstr ""
msgid "hide status prefix"
msgstr ""
msgid "show source of copied files"
msgstr ""
msgid "show difference from revision"
msgstr ""
msgid "replace existing tag"
msgstr ""
msgid "make the tag local"
msgstr ""
msgid "revision to tag"
msgstr ""
msgid "remove a tag"
msgstr ""
msgid "[-l] [-m TEXT] [-d DATE] [-u USER] [-r REV] NAME..."
msgstr ""
msgid "[-p]"
msgstr ""
msgid "update to new tip if changesets were unbundled"
msgstr ""
msgid "[-u] FILE..."
msgstr ""
msgid "overwrite locally modified files (no backup)"
msgstr ""
msgid "[-C] [-d DATE] [[-r] REV]"
msgstr ""
msgid "not found in manifest"
msgstr ""
msgid "branch name not in UTF-8!"
msgstr ""
msgid " searching for copies back to rev %d\n"
msgstr ""
msgid ""
" unmatched files in local:\n"
" %s\n"
msgstr ""
msgid ""
" unmatched files in other:\n"
" %s\n"
msgstr ""
msgid " all copies found (* = to merge, ! = divergent):\n"
msgstr ""
msgid " %s -> %s %s\n"
msgstr ""
msgid " checking for directory renames\n"
msgstr ""
msgid " dir %s -> %s\n"
msgstr ""
msgid " file %s -> %s\n"
msgstr ""
msgid "'\\n' and '\\r' disallowed in filenames: %r"
msgstr ""
msgid "directory %r already in dirstate"
msgstr ""
msgid "file %r in dirstate clashes with %r"
msgstr ""
msgid "not in dirstate: %s\n"
msgstr ""
msgid "character device"
msgstr ""
msgid "block device"
msgstr ""
msgid "fifo"
msgstr ""
msgid "socket"
msgstr ""
msgid "directory"
msgstr ""
msgid "%s: unsupported file type (type is %s)\n"
msgstr ""
msgid "abort: %s\n"
msgstr "afbrudt: %s\n"
msgid ""
"hg: command '%s' is ambiguous:\n"
" %s\n"
msgstr ""
"hg: kommandoen '%s' is tvetydig:\n"
" %s\n"
msgid "timed out waiting for lock held by %s"
msgstr ""
msgid "lock held by %s"
msgstr ""
msgid "abort: %s: %s\n"
msgstr "afbrudt: %s: %s\n"
msgid "abort: could not lock %s: %s\n"
msgstr "afbrudt: kunne ikke låse %s: %s\n"
msgid "hg %s: %s\n"
msgstr "hg %s: %s\n"
msgid "hg: %s\n"
msgstr "hg: %s\n"
msgid "abort: %s!\n"
msgstr "afbrudt: %s!\n"
msgid "abort: %s"
msgstr "afbrudt: %s"
msgid " empty string\n"
msgstr " tom streng\n"
msgid "killed!\n"
msgstr "dræbt!\n"
msgid "hg: unknown command '%s'\n"
msgstr "hg: ukendt kommando '%s'\n"
msgid "abort: could not import module %s!\n"
msgstr "afbrudt: kunne ikke importere modul %s!\n"
msgid "(did you forget to compile extensions?)\n"
msgstr "(glemte du at kompilere udvidelserne?)\n"
msgid "(is your Python install correct?)\n"
msgstr "(er din Python installeret korrekt?)\n"
msgid "abort: error: %s\n"
msgstr ""
msgid "broken pipe\n"
msgstr ""
msgid "interrupted!\n"
msgstr "standset!\n"
msgid ""
"\n"
"broken pipe\n"
msgstr ""
msgid "abort: out of memory\n"
msgstr "afbrudt: løbet tør for hukommelse\n"
msgid "** unknown exception encountered, details follow\n"
msgstr "** der opstod en ukendt fejl, detaljer følger\n"
msgid "** report bug details to http://www.selenic.com/mercurial/bts\n"
msgstr "** angiv fejldetaljer på http://www.selenic.com/mercurial/bts\n"
msgid "** or mercurial@selenic.com\n"
msgstr "** eller mercurial@selenic.com\n"
msgid "** Mercurial Distributed SCM (version %s)\n"
msgstr "** Mercurial Distributed SCM (version %s)\n"
msgid "** Extensions loaded: %s\n"
msgstr ""
msgid "malformed --config option: %s"
msgstr ""
msgid "extension '%s' overrides commands: %s\n"
msgstr ""
msgid "Option --config may not be abbreviated!"
msgstr ""
msgid "Option --cwd may not be abbreviated!"
msgstr ""
msgid ""
"Option -R has to be separated from other options (i.e. not -qR) and --"
"repository may only be abbreviated as --repo!"
msgstr ""
msgid "Time: real %.3f secs (user %.3f+%.3f sys %.3f+%.3f)\n"
msgstr ""
msgid "repository '%s' is not local"
msgstr ""
msgid "invalid arguments"
msgstr ""
msgid "exception raised - generating profile anyway\n"
msgstr ""
msgid ""
"lsprof not available - install from http://codespeak.net/svn/user/arigo/hack/"
"misc/lsprof/"
msgstr ""
msgid "*** failed to import extension %s from %s: %s\n"
msgstr ""
msgid "*** failed to import extension %s: %s\n"
msgstr ""
msgid "couldn't find merge tool %s\n"
msgstr ""
msgid "tool %s can't handle symlinks\n"
msgstr ""
msgid "tool %s can't handle binary\n"
msgstr ""
msgid "tool %s requires a GUI\n"
msgstr ""
msgid "picked tool '%s' for %s (binary %s symlink %s)\n"
msgstr ""
msgid ""
" no tool found to merge %s\n"
"keep (l)ocal or take (o)ther?"
msgstr ""
msgid "[lo]"
msgstr ""
msgid "l"
msgstr ""
msgid "merging %s and %s to %s\n"
msgstr ""
msgid "merging %s\n"
msgstr ""
msgid "my %s other %s ancestor %s\n"
msgstr ""
msgid " premerge successful\n"
msgstr ""
msgid ""
" output file %s appears unchanged\n"
"was merge successful (yn)?"
msgstr ""
msgid "[yn]"
msgstr ""
msgid "n"
msgstr ""
msgid "merging %s failed!\n"
msgstr ""
msgid "Inconsistent state, %s:%s is good and bad"
msgstr ""
msgid "unknown bisect kind %s"
msgstr ""
msgid "Date Formats"
msgstr "Datoformater"
msgid ""
"\n"
" Some commands allow the user to specify a date:\n"
" backout, commit, import, tag: Specify the commit date.\n"
" log, revert, update: Select revision(s) by date.\n"
"\n"
" Many date formats are valid. Here are some examples:\n"
"\n"
" \"Wed Dec 6 13:18:29 2006\" (local timezone assumed)\n"
" \"Dec 6 13:18 -0600\" (year assumed, time offset provided)\n"
" \"Dec 6 13:18 UTC\" (UTC and GMT are aliases for +0000)\n"
" \"Dec 6\" (midnight)\n"
" \"13:18\" (today assumed)\n"
" \"3:39\" (3:39AM assumed)\n"
" \"3:39pm\" (15:39)\n"
" \"2006-12-06 13:18:29\" (ISO 8601 format)\n"
" \"2006-12-6 13:18\"\n"
" \"2006-12-6\"\n"
" \"12-6\"\n"
" \"12/6\"\n"
" \"12/6/6\" (Dec 6 2006)\n"
"\n"
" Lastly, there is Mercurial's internal format:\n"
"\n"
" \"1165432709 0\" (Wed Dec 6 13:18:29 2006 UTC)\n"
"\n"
" This is the internal representation format for dates. unixtime is\n"
" the number of seconds since the epoch (1970-01-01 00:00 UTC). offset\n"
" is the offset of the local timezone, in seconds west of UTC (negative\n"
" if the timezone is east of UTC).\n"
"\n"
" The log command also accepts date ranges:\n"
"\n"
" \"<{date}\" - on or before a given date\n"
" \">{date}\" - on or after a given date\n"
" \"{date} to {date}\" - a date range, inclusive\n"
" \"-{days}\" - within a given number of days of today\n"
" "
msgstr ""
"\n"
" Nogle kommandoer tillader brugeren at specificere en dato:\n"
" backout, commit, import, tag: specificer commit-datoen.\n"
" log, revert, update: vælg revisioner efter dato.\n"
"\n"
" Der er mange gyldige datoformater. Her er nogle eksempler:\n"
"\n"
" \"Wed Dec 6 13:18:29 2006\" (antager lokal tidszone)\n"
" \"Dec 6 13:18 -0600\" (antager år, tidszone er angivet)\n"
" \"Dec 6 13:18 UTC\" (UTC og GMT er aliaser for +0000)\n"
" \"Dec 6\" (midnat)\n"
" \"13:18\" (antager dags dato)\n"
" \"3:39\"\n"
" \"3:39pm\" (15:39)\n"
" \"2006-12-06 13:18:29\" (ISO 8601 format)\n"
" \"2006-12-6 13:18\"\n"
" \"2006-12-6\"\n"
" \"12-6\"\n"
" \"12/6\"\n"
" \"12/6/6\" (6. dec. 2006)\n"
"\n"
" Endelig er der Mercurials interne format:\n"
"\n"
" \"1165432709 0\" (Ons 6. dec. 13:18:29 2006 UTC)\n"
"\n"
" Dette er den interne repræsentation af datoer. unixtime er\n"
" antallet af sekunder siden begyndelsen af epoken (1970-01-01 00:00\n"
" UTC). offset er den lokale tidszone, angivet i antal sekunder vest\n"
" for UTC (negativ hvis tidszonen er øst for UTC).\n"
"\n"
" Kommandoen log accepterer også datointervaller:\n"
"\n"
" \"<{date}\" - på eller før den angivne dato\n"
" \">{date}\" - på eller efter den angivne dato\n"
" \"{date} to {date}\" - et datointerval, inklusiv endepunkterne\n"
" \"-{days}\" - indenfor et angivet antal dage, fra dags dato\n"
" "
msgid "File Name Patterns"
msgstr ""
msgid ""
"\n"
" Mercurial accepts several notations for identifying one or more\n"
" files at a time.\n"
"\n"
" By default, Mercurial treats filenames as shell-style extended\n"
" glob patterns.\n"
"\n"
" Alternate pattern notations must be specified explicitly.\n"
"\n"
" To use a plain path name without any pattern matching, start a\n"
" name with \"path:\". These path names must match completely, from\n"
" the root of the current repository.\n"
"\n"
" To use an extended glob, start a name with \"glob:\". Globs are\n"
" rooted at the current directory; a glob such as \"*.c\" will match\n"
" files ending in \".c\" in the current directory only.\n"
"\n"
" The supported glob syntax extensions are \"**\" to match any string\n"
" across path separators, and \"{a,b}\" to mean \"a or b\".\n"
"\n"
" To use a Perl/Python regular expression, start a name with \"re:\".\n"
" Regexp pattern matching is anchored at the root of the repository.\n"
"\n"
" Plain examples:\n"
"\n"
" path:foo/bar a name bar in a directory named foo in the root of\n"
" the repository\n"
" path:path:name a file or directory named \"path:name\"\n"
"\n"
" Glob examples:\n"
"\n"
" glob:*.c any name ending in \".c\" in the current directory\n"
" *.c any name ending in \".c\" in the current directory\n"
" **.c any name ending in \".c\" in the current directory, or\n"
" any subdirectory\n"
" foo/*.c any name ending in \".c\" in the directory foo\n"
" foo/**.c any name ending in \".c\" in the directory foo, or any\n"
" subdirectory\n"
"\n"
" Regexp examples:\n"
"\n"
" re:.*\\.c$ any name ending in \".c\", anywhere in the repository\n"
"\n"
" "
msgstr ""
msgid "Environment Variables"
msgstr "Miljøvariable"
msgid ""
"\n"
"HG::\n"
" Path to the 'hg' executable, automatically passed when running hooks,\n"
" extensions or external tools. If unset or empty, an executable named\n"
" 'hg' (with com/exe/bat/cmd extension on Windows) is searched.\n"
"\n"
"HGEDITOR::\n"
" This is the name of the editor to use when committing. See EDITOR.\n"
"\n"
" (deprecated, use .hgrc)\n"
"\n"
"HGENCODING::\n"
" This overrides the default locale setting detected by Mercurial.\n"
" This setting is used to convert data including usernames,\n"
" changeset descriptions, tag names, and branches. This setting can\n"
" be overridden with the --encoding command-line option.\n"
"\n"
"HGENCODINGMODE::\n"
" This sets Mercurial's behavior for handling unknown characters\n"
" while transcoding user inputs. The default is \"strict\", which\n"
" causes Mercurial to abort if it can't translate a character. Other\n"
" settings include \"replace\", which replaces unknown characters, and\n"
" \"ignore\", which drops them. This setting can be overridden with\n"
" the --encodingmode command-line option.\n"
"\n"
"HGMERGE::\n"
" An executable to use for resolving merge conflicts. The program\n"
" will be executed with three arguments: local file, remote file,\n"
" ancestor file.\n"
"\n"
" (deprecated, use .hgrc)\n"
"\n"
"HGRCPATH::\n"
" A list of files or directories to search for hgrc files. Item\n"
" separator is \":\" on Unix, \";\" on Windows. If HGRCPATH is not set,\n"
" platform default search path is used. If empty, only .hg/hgrc of\n"
" current repository is read.\n"
"\n"
" For each element in path, if a directory, all entries in directory\n"
" ending with \".rc\" are added to path. Else, element itself is\n"
" added to path.\n"
"\n"
"HGUSER::\n"
" This is the string used for the author of a commit.\n"
"\n"
" (deprecated, use .hgrc)\n"
"\n"
"EMAIL::\n"
" If HGUSER is not set, this will be used as the author for a commit.\n"
"\n"
"LOGNAME::\n"
" If neither HGUSER nor EMAIL is set, LOGNAME will be used (with\n"
" '@hostname' appended) as the author value for a commit.\n"
"\n"
"VISUAL::\n"
" This is the name of the editor to use when committing. See EDITOR.\n"
"\n"
"EDITOR::\n"
" Sometimes Mercurial needs to open a text file in an editor\n"
" for a user to modify, for example when writing commit messages.\n"
" The editor it uses is determined by looking at the environment\n"
" variables HGEDITOR, VISUAL and EDITOR, in that order. The first\n"
" non-empty one is chosen. If all of them are empty, the editor\n"
" defaults to 'vi'.\n"
"\n"
"PYTHONPATH::\n"
" This is used by Python to find imported modules and may need to be set\n"
" appropriately if Mercurial is not installed system-wide.\n"
" "
msgstr ""
msgid "Specifying Single Revisions"
msgstr "Angivning af en enkelt revision"
msgid ""
"\n"
" Mercurial accepts several notations for identifying individual\n"
" revisions.\n"
"\n"
" A plain integer is treated as a revision number. Negative\n"
" integers are treated as offsets from the tip, with -1 denoting the\n"
" tip.\n"
"\n"
" A 40-digit hexadecimal string is treated as a unique revision\n"
" identifier.\n"
"\n"
" A hexadecimal string less than 40 characters long is treated as a\n"
" unique revision identifier, and referred to as a short-form\n"
" identifier. A short-form identifier is only valid if it is the\n"
" prefix of one full-length identifier.\n"
"\n"
" Any other string is treated as a tag name, which is a symbolic\n"
" name associated with a revision identifier. Tag names may not\n"
" contain the \":\" character.\n"
"\n"
" The reserved name \"tip\" is a special tag that always identifies\n"
" the most recent revision.\n"
"\n"
" The reserved name \"null\" indicates the null revision. This is the\n"
" revision of an empty repository, and the parent of revision 0.\n"
"\n"
" The reserved name \".\" indicates the working directory parent. If\n"
" no working directory is checked out, it is equivalent to null.\n"
" If an uncommitted merge is in progress, \".\" is the revision of\n"
" the first parent.\n"
" "
msgstr ""
msgid "Specifying Multiple Revisions"
msgstr "Angivning af flere revisioner"
msgid ""
"\n"
" When Mercurial accepts more than one revision, they may be\n"
" specified individually, or provided as a continuous range,\n"
" separated by the \":\" character.\n"
"\n"
" The syntax of range notation is [BEGIN]:[END], where BEGIN and END\n"
" are revision identifiers. Both BEGIN and END are optional. If\n"
" BEGIN is not specified, it defaults to revision number 0. If END\n"
" is not specified, it defaults to the tip. The range \":\" thus\n"
" means \"all revisions\".\n"
"\n"
" If BEGIN is greater than END, revisions are treated in reverse\n"
" order.\n"
"\n"
" A range acts as a closed interval. This means that a range of 3:5\n"
" gives 3, 4 and 5. Similarly, a range of 4:2 gives 4, 3, and 2.\n"
" "
msgstr ""
msgid "Diff Formats"
msgstr ""
msgid ""
"\n"
" Mercurial's default format for showing changes between two versions\n"
" of a file is compatible with the unified format of GNU diff, which\n"
" can be used by GNU patch and many other standard tools.\n"
"\n"
" While this standard format is often enough, it does not encode the\n"
" following information:\n"
"\n"
" - executable status\n"
" - copy or rename information\n"
" - changes in binary files\n"
" - creation or deletion of empty files\n"
"\n"
" Mercurial also supports the extended diff format from the git VCS\n"
" which addresses these limitations. The git diff format is not\n"
" produced by default because there are very few tools which\n"
" understand this format.\n"
"\n"
" This means that when generating diffs from a Mercurial repository\n"
" (e.g. with \"hg export\"), you should be careful about things like\n"
" file copies and renames or other things mentioned above, because\n"
" when applying a standard diff to a different repository, this extra\n"
" information is lost. Mercurial's internal operations (like push and\n"
" pull) are not affected by this, because they use an internal binary\n"
" format for communicating changes.\n"
"\n"
" To make Mercurial produce the git extended diff format, use the\n"
" --git option available for many commands, or set 'git = True' in the\n"
" [diff] section of your hgrc. You do not need to set this option when\n"
" importing diffs in this format or using them in the mq extension.\n"
" "
msgstr ""
msgid "Template Usage"
msgstr ""
msgid ""
"\n"
" Mercurial allows you to customize output of commands through\n"
" templates. You can either pass in a template from the command line,\n"
" via the --template option, or select an existing template-style (--"
"style).\n"
"\n"
" You can customize output for any \"log-like\" command: log, outgoing,\n"
" incoming, tip, parents, heads and glog are all template-enabled.\n"
"\n"
" Three styles are packaged with Mercurial: default (the style used\n"
" when no explicit preference is passed), compact and changelog. Usage:\n"
"\n"
" $ hg log -r1 --style changelog\n"
"\n"
" A template is a piece of text, with markup to invoke variable "
"expansion:\n"
"\n"
" $ hg log -r1 --template \"{node}\\n\"\n"
" b56ce7b07c52de7d5fd79fb89701ea538af65746\n"
"\n"
" Strings in curly braces are called keywords. The availability of\n"
" keywords depends on the exact context of the templater. These keywords\n"
" are usually available for templating a log-like command:\n"
"\n"
" - author: String. The unmodified author of the changeset.\n"
" - branches: String. The name of the branch on which the changeset\n"
" was committed. Will be empty if the branch name was default.\n"
" - date: Date information. The date when the changeset was committed.\n"
" - desc: String. The text of the changeset description.\n"
" - files: List of strings. All files modified, added, or removed by\n"
" this changeset.\n"
" - file_adds: List of strings. Files added by this changeset.\n"
" - file_mods: List of strings. Files modified by this changeset.\n"
" - file_dels: List of strings. Files removed by this changeset.\n"
" - node: String. The changeset identification hash, as a 40-character\n"
" hexadecimal string.\n"
" - parents: List of strings. The parents of the changeset.\n"
" - rev: Integer. The repository-local changeset revision number.\n"
" - tags: List of strings. Any tags associated with the changeset.\n"
"\n"
" The \"date\" keyword does not produce human-readable output. If you\n"
" want to use a date in your output, you can use a filter to process it.\n"
" Filters are functions which return a string based on the input "
"variable.\n"
" You can also use a chain of filters to get the wanted output:\n"
"\n"
" $ hg tip --template \"{date|isodate}\\n\"\n"
" 2008-08-21 18:22 +0000\n"
"\n"
" List of filters:\n"
"\n"
" - addbreaks: Any text. Add an XHTML \"<br />\" tag before the end of\n"
" every line except the last.\n"
" - age: Date. Returns a human-readable age for the given date.\n"
" - basename: Any text. Treats the text as a path, and returns the\n"
" basename. For example, \"foo/bar/baz\" becomes \"baz\".\n"
" - date: Date. Returns a date in a Unix date command format, including\n"
" the timezone: \"Mon Sep 04 15:13:13 2006 0700\".\n"
" - domain: Any text. Finds the first string that looks like an email\n"
" address, and extracts just the domain component.\n"
" - email: Any text. Extracts the first string that looks like an email\n"
" address.\n"
" - escape: Any text. Replaces the special XML/XHTML characters \"&\",\n"
" \"<\" and \">\" with XML entities.\n"
" - fill68: Any text. Wraps the text to fit in 68 columns.\n"
" - fill76: Any text. Wraps the text to fit in 76 columns.\n"
" - firstline: Any text. Returns the first line of text.\n"
" - hgdate: Date. Returns the date as a pair of numbers:\n"
" \"1157407993 25200\" (Unix timestamp, timezone offset).\n"
" - isodate: Date. Returns the date in ISO 8601 format.\n"
" - obfuscate: Any text. Returns the input text rendered as a sequence\n"
" of XML entities.\n"
" - person: Any text. Returns the text before an email address.\n"
" - rfc822date: Date. Returns a date using the same format used\n"
" in email headers.\n"
" - short: Changeset hash. Returns the short form of a changeset hash,\n"
" i.e. a 12-byte hexadecimal string.\n"
" - shortdate: Date. Returns a date like \"2006-09-04\".\n"
" - strip: Any text. Strips all leading and trailing whitespace.\n"
" - tabindent: Any text. Returns the text, with every line except the\n"
" first starting with a tab character.\n"
" - urlescape: Any text. Escapes all \"special\" characters. For example,\n"
" \"foo bar\" becomes \"foo%20bar\".\n"
" - user: Any text. Returns the user portion of an email address.\n"
" "
msgstr ""
msgid "destination directory: %s\n"
msgstr ""
msgid "destination '%s' already exists"
msgstr ""
msgid ""
"src repository does not support revision lookup and so doesn't support clone "
"by revision"
msgstr ""
msgid "clone from remote to remote not supported"
msgstr ""
msgid "updating working directory\n"
msgstr ""
msgid "updated"
msgstr "opdateret"
msgid "merged"
msgstr "sammenføjet"
msgid "removed"
msgstr "fjernet"
msgid "unresolved"
msgstr "uløst"
msgid "%d files %s"
msgstr "%d filer %s"
msgid "use 'hg resolve' to retry unresolved file merges\n"
msgstr ""
msgid "(branch merge, don't forget to commit)\n"
msgstr ""
msgid "error reading %s/.hg/hgrc: %s\n"
msgstr ""
msgid "SSL support is unavailable"
msgstr "understøttelse for SSL er ikke tilstede"
msgid "IPv6 not available on this system"
msgstr "IPv6 er ikke til rådighed på dette system"
msgid "cannot start server at '%s:%d': %s"
msgstr "kan ikke starte server på '%s:%d': %s"
msgid "calling hook %s: %s\n"
msgstr ""
msgid "%s hook is invalid (\"%s\" not in a module)"
msgstr ""
msgid "%s hook is invalid (import of \"%s\" failed)"
msgstr ""
msgid "%s hook is invalid (\"%s\" is not defined)"
msgstr ""
msgid "%s hook is invalid (\"%s\" is not callable)"
msgstr ""
msgid "error: %s hook failed: %s\n"
msgstr ""
msgid "error: %s hook raised an exception: %s\n"
msgstr ""
msgid "%s hook failed"
msgstr ""
msgid "warning: %s hook failed\n"
msgstr ""
msgid "running hook %s: %s\n"
msgstr ""
msgid "%s hook %s"
msgstr ""
msgid "warning: %s hook %s\n"
msgstr ""
msgid "connection ended unexpectedly"
msgstr ""
msgid "unsupported URL component: \"%s\""
msgstr ""
msgid "using %s\n"
msgstr "bruger %s\n"
msgid "capabilities: %s\n"
msgstr ""
msgid "operation not supported over http"
msgstr ""
msgid "sending %s command\n"
msgstr "sender %s kommando\n"
msgid "sending %s bytes\n"
msgstr "sender %s bytes\n"
msgid "authorization failed"
msgstr "autorisation fejlede"
msgid "http error while sending %s command\n"
msgstr ""
msgid "http error, possibly caused by proxy setting"
msgstr ""
msgid "real URL is %s\n"
msgstr "den rigtige URL er %s\n"
msgid "Requested URL: '%s'\n"
msgstr ""
msgid "'%s' does not appear to be an hg repository"
msgstr ""
msgid "'%s' sent a broken Content-Type header (%s)"
msgstr ""
msgid "'%s' uses newer protocol %s"
msgstr "'%s' bruger nyere protokol %s"
msgid "look up remote revision"
msgstr ""
msgid "unexpected response:"
msgstr ""
msgid "look up remote changes"
msgstr ""
msgid "push failed (unexpected response):"
msgstr ""
msgid "push failed: %s"
msgstr "skub fejlede: %s"
msgid "Python support for SSL and HTTPS is not installed"
msgstr ""
msgid "cannot create new http repository"
msgstr "kan ikke lave nyt http arkiv"
msgid "%s: ignoring invalid syntax '%s'\n"
msgstr "%s: ignorerer ugyldig syntaks '%s'\n"
msgid "skipping unreadable ignore file '%s': %s\n"
msgstr ""
msgid "repository %s not found"
msgstr "arkivet %s blev ikke fundet"
msgid "repository %s already exists"
msgstr "arkivet %s eksisterer allerede"
msgid "requirement '%s' not supported"
msgstr ""
msgid "%r cannot be used in a tag name"
msgstr ""
msgid "working copy of .hgtags is changed (please commit .hgtags manually)"
msgstr ""
msgid "%s, line %s: %s\n"
msgstr "%s, linie %s: %s\n"
msgid "cannot parse entry"
msgstr ""
msgid "node '%s' is not well formed"
msgstr ""
msgid "tag '%s' refers to unknown node"
msgstr ""
msgid "unknown revision '%s'"
msgstr ""
msgid "filtering %s through %s\n"
msgstr ""
msgid "journal already exists - run hg recover"
msgstr ""
msgid "rolling back interrupted transaction\n"
msgstr ""
msgid "no interrupted transaction available\n"
msgstr ""
msgid "rolling back last transaction\n"
msgstr ""
msgid "Named branch could not be reset, current branch still is: %s\n"
msgstr ""
msgid "no rollback information available\n"
msgstr ""
msgid "waiting for lock on %s held by %r\n"
msgstr ""
msgid "repository %s"
msgstr ""
msgid "working directory of %s"
msgstr ""
msgid " %s: searching for copy revision for %s\n"
msgstr ""
msgid " %s: copy %s:%s\n"
msgstr ""
msgid "cannot partially commit a merge (do not specify files or patterns)"
msgstr ""
msgid "%s not tracked!\n"
msgstr ""
msgid "unresolved merge conflicts (see hg resolve)"
msgstr ""
msgid "closing the default branch is invalid"
msgstr ""
msgid "nothing changed\n"
msgstr ""
msgid "trouble committing %s!\n"
msgstr ""
msgid "HG: Enter commit message. Lines beginning with 'HG:' are removed."
msgstr ""
msgid "empty commit message"
msgstr ""
msgid "%s does not exist!\n"
msgstr ""
msgid ""
"%s: files over 10MB may cause memory and performance problems\n"
"(use 'hg revert %s' to unadd the file)\n"
msgstr ""
msgid "%s not added: only files and symlinks supported currently\n"
msgstr ""
msgid "%s already tracked!\n"
msgstr ""
msgid "%s not added!\n"
msgstr ""
msgid "%s still exists!\n"
msgstr ""
msgid "%s not removed!\n"
msgstr ""
msgid "copy failed: %s is not a file or a symbolic link\n"
msgstr ""
msgid "searching for changes\n"
msgstr "leder efter ændringer\n"
msgid "examining %s:%s\n"
msgstr "undersøger %s:%s\n"
msgid "branch already found\n"
msgstr "gren er allerede fundet\n"
msgid "found incomplete branch %s:%s\n"
msgstr "fandt ukomplet gren %s:%s\n"
msgid "found new changeset %s\n"
msgstr "fandt ny ændring %s\n"
msgid "request %d: %s\n"
msgstr ""
msgid "received %s:%s\n"
msgstr "modtog %s:%s\n"
msgid "narrowing %d:%d %s\n"
msgstr ""
msgid "found new branch changeset %s\n"
msgstr ""
msgid "narrowed branch search to %s:%s\n"
msgstr ""
msgid "already have changeset "
msgstr ""
msgid "warning: repository is unrelated\n"
msgstr "advarsel: arkivet er urelateret\n"
msgid "repository is unrelated"
msgstr "arkivet er urelateret"
msgid "found new changesets starting at "
msgstr ""
msgid "%d total queries\n"
msgstr ""
msgid "common changesets up to "
msgstr ""
msgid "requesting all changes\n"
msgstr ""
msgid ""
"Partial pull cannot be done because other repository doesn't support "
"changegroupsubset."
msgstr ""
msgid "abort: push creates new remote heads!\n"
msgstr ""
msgid "(did you forget to merge? use push -f to force)\n"
msgstr ""
msgid "note: unsynced remote changes!\n"
msgstr ""
msgid "%d changesets found\n"
msgstr ""
msgid "list of changesets:\n"
msgstr ""
msgid "empty or missing revlog for %s"
msgstr ""
msgid "add changeset %s\n"
msgstr ""
msgid "adding changesets\n"
msgstr "tilføjer ændringer\n"
msgid "received changelog group is empty"
msgstr ""
msgid "adding manifests\n"
msgstr "tilføjer manifester\n"
msgid "adding file changes\n"
msgstr "tilføjer filændringer\n"
msgid "adding %s revisions\n"
msgstr "tilføjer %s ændringer\n"
msgid "received file revlog group is empty"
msgstr ""
msgid " (%+d heads)"
msgstr " (%+d hoveder)"
msgid "added %d changesets with %d changes to %d files%s\n"
msgstr "tilføjede %d ændringer med %d ændringer i %d filer%s\n"
msgid "updating the branch cache\n"
msgstr ""
msgid "Unexpected response from remote server:"
msgstr ""
msgid "operation forbidden by server"
msgstr ""
msgid "locking the remote repository failed"
msgstr ""
msgid "the server sent an unknown error code"
msgstr ""
msgid "streaming all changes\n"
msgstr ""
msgid "%d files to transfer, %s of data\n"
msgstr ""
msgid "adding %s (%s)\n"
msgstr "tilføjer %s (%s)\n"
msgid "transferred %s in %.1f seconds (%s/sec)\n"
msgstr ""
msgid "no [smtp]host in hgrc - cannot send mail"
msgstr ""
msgid "sending mail: smtp host %s, port %s\n"
msgstr ""
msgid "can't use TLS: Python SSL support not installed"
msgstr ""
msgid "(using tls)\n"
msgstr ""
msgid "(authenticating to mail server as %s)\n"
msgstr ""
msgid "sending mail: %s\n"
msgstr ""
msgid "smtp specified as email transport, but no smtp host configured"
msgstr ""
msgid "%r specified as email transport, but not in PATH"
msgstr ""
msgid "ignoring invalid sendcharset: %s\n"
msgstr ""
msgid "invalid email address: %s"
msgstr ""
msgid "invalid local address: %s"
msgstr ""
msgid "'\\n' and '\\r' disallowed in filenames"
msgstr ""
msgid "failed to remove %s from manifest"
msgstr ""
msgid "diff context lines count must be an integer, not %r"
msgstr ""
msgid ""
"untracked file in working directory differs from file in requested revision: "
"'%s'"
msgstr ""
msgid "case-folding collision between %s and %s"
msgstr ""
msgid "resolving manifests\n"
msgstr ""
msgid " overwrite %s partial %s\n"
msgstr ""
msgid " ancestor %s local %s remote %s\n"
msgstr ""
msgid ""
" conflicting flags for %s\n"
"(n)one, e(x)ec or sym(l)ink?"
msgstr ""
msgid ""
" local changed %s which remote deleted\n"
"use (c)hanged version or (d)elete?"
msgstr ""
msgid "[cd]"
msgstr ""
msgid "c"
msgstr ""
msgid ""
"remote changed %s which local deleted\n"
"use (c)hanged version or leave (d)eleted?"
msgstr ""
msgid "preserving %s for resolve of %s\n"
msgstr ""
msgid "update failed to remove %s: %s!\n"
msgstr ""
msgid "getting %s\n"
msgstr ""
msgid "moving %s to %s\n"
msgstr ""
msgid "getting %s to %s\n"
msgstr ""
msgid "warning: detected divergent renames of %s to:\n"
msgstr ""
msgid "branch %s not found"
msgstr ""
msgid "can't merge with ancestor"
msgstr ""
msgid "nothing to merge (use 'hg update' or check 'hg heads')"
msgstr ""
msgid "crosses branches (use 'hg merge' or 'hg update -C' to discard changes)"
msgstr ""
msgid "crosses branches (use 'hg merge' or 'hg update -C')"
msgstr ""
msgid "crosses named branches (use 'hg update -C' to discard changes)"
msgstr ""
msgid "cannot create %s: destination already exists"
msgstr ""
msgid "cannot create %s: unable to create destination directory"
msgstr ""
msgid "found patch at byte %d\n"
msgstr ""
msgid "patch generated by hg export\n"
msgstr ""
msgid "unable to find '%s' for patching\n"
msgstr ""
msgid "patching file %s\n"
msgstr ""
msgid "%d out of %d hunks FAILED -- saving rejects to file %s\n"
msgstr ""
msgid "bad hunk #%d %s (%d %d %d %d)"
msgstr ""
msgid "file %s already exists\n"
msgstr ""
msgid "Hunk #%d succeeded at %d %s(offset %d %s).\n"
msgstr ""
msgid "Hunk #%d FAILED at %d\n"
msgstr ""
msgid "bad hunk #%d"
msgstr ""
msgid "bad hunk #%d old text line %d"
msgstr ""
msgid "could not extract binary patch"
msgstr ""
msgid "binary patch is %d bytes, not %d"
msgstr ""
msgid "unable to strip away %d dirs from %s"
msgstr ""
msgid "undefined source and destination files"
msgstr ""
msgid "malformed patch %s %s"
msgstr ""
msgid "unsupported parser state: %s"
msgstr ""
msgid "patch command failed: %s"
msgstr ""
msgid "no valid hunks found; trying with %r instead\n"
msgstr ""
msgid "saving bundle to %s\n"
msgstr ""
msgid "adding branch\n"
msgstr "tilføjer gren\n"
msgid "cannot %s; remote repository does not support the %r capability"
msgstr ""
msgid "unknown compression type %r"
msgstr ""
msgid "index %s unknown flags %#04x for format v0"
msgstr ""
msgid "index %s unknown flags %#04x for revlogng"
msgstr ""
msgid "index %s unknown format %d"
msgstr ""
msgid "no node"
msgstr ""
msgid "ambiguous identifier"
msgstr ""
msgid "no match found"
msgstr ""
msgid "incompatible revision flag %x"
msgstr ""
msgid "%s not found in the transaction"
msgstr ""
msgid "unknown base"
msgstr ""
msgid "consistency error adding group"
msgstr ""
msgid "%s looks like a binary file."
msgstr ""
msgid "can only specify two labels."
msgstr ""
msgid "warning: conflicts during merge.\n"
msgstr ""
msgid "couldn't parse location %s"
msgstr ""
msgid "could not create remote repo"
msgstr ""
msgid "remote: "
msgstr ""
msgid "no suitable response from remote hg"
msgstr ""
msgid "push refused: %s"
msgstr ""
msgid "unsynced changes"
msgstr ""
msgid "cannot lock static-http repository"
msgstr ""
msgid "cannot create new static-http repository"
msgstr ""
msgid "invalid entry in fncache, line %s"
msgstr ""
msgid "scanning\n"
msgstr ""
msgid "%d files, %d bytes to transfer\n"
msgstr "%d filer, skal overføre %d bytes\n"
msgid "sending %s (%d bytes)\n"
msgstr ""
msgid "unmatched quotes"
msgstr ""
msgid "style not found: %s"
msgstr ""
msgid "%s:%s: parse error"
msgstr ""
msgid "template file %s: %s"
msgstr ""
msgid "Error expanding '%s%%%s'"
msgstr ""
msgid "transaction abort!\n"
msgstr ""
msgid "failed to truncate %s\n"
msgstr ""
msgid "rollback completed\n"
msgstr ""
msgid "Not trusting file %s from untrusted user %s, group %s\n"
msgstr ""
msgid ""
"Failed to parse %s\n"
"%s"
msgstr ""
msgid "Ignored: %s\n"
msgstr "Ignoreret: %s\n"
msgid "unable to open %s: %s"
msgstr "kunne ikke åbne %s: %s"
msgid ""
"failed to parse %s\n"
"%s"
msgstr ""
msgid ""
"Error in configuration section [%s] parameter '%s':\n"
"%s"
msgstr ""
msgid "Ignoring untrusted configuration option %s.%s = %s\n"
msgstr ""
msgid ""
"Error in configuration section [%s]:\n"
"%s"
msgstr ""
msgid "enter a commit username:"
msgstr "angiv et commit brugernavn:"
msgid "No username found, using '%s' instead\n"
msgstr "Fandt intet brugernavn, bruger '%s' istedet\n"
msgid "Please specify a username."
msgstr "Angiv venligst et brugernavn."
msgid "username %s contains a newline\n"
msgstr "brugernavn %s indeholder et linieskift\n"
msgid "unrecognized response\n"
msgstr ""
msgid "response expected"
msgstr ""
msgid "password: "
msgstr "kodeord: "
msgid "edit failed"
msgstr "redigering fejlede"
msgid "http authorization required"
msgstr ""
msgid "http authorization required\n"
msgstr ""
msgid "realm: %s\n"
msgstr ""
msgid "user: %s\n"
msgstr ""
msgid "user:"
msgstr ""
msgid "proxying through http://%s:%s\n"
msgstr ""
msgid "http auth: user %s, password %s\n"
msgstr ""
msgid "%s, please check your locale settings"
msgstr "%s, tjek venligst dine sprogindstillinger"
msgid "command '%s' failed: %s"
msgstr "kommandoen '%s' fejlede: %s"
msgid "path contains illegal component: %s"
msgstr "stien indeholder ugyldig komponent: %s"
msgid "path %r is inside repo %r"
msgstr "stien %r er inde i repo %r"
msgid "path %r traverses symbolic link %r"
msgstr "stien %r følger symbolsk link %r"
msgid "Hardlinks not supported"
msgstr "Hardlinks er ikke supporteret"
msgid "user name not available - set USERNAME environment variable"
msgstr "der er ikke noget brugernavn - sæt USERNAME miljøvariabel"
msgid "exited with status %d"
msgstr "afsluttede med status %d"
msgid "killed by signal %d"
msgstr "dræbt af signal %d"
msgid "stopped by signal %d"
msgstr "stoppet af signal %d"
msgid "invalid exit code"
msgstr "ugyldig returkode"
msgid "could not symlink to %r: %s"
msgstr "kunne ikke lave et symbolsk link til %r: %s"
msgid "invalid date: %r "
msgstr "ugyldig dato: %r "
msgid "date exceeds 32 bits: %d"
msgstr "dato overskrider 32 bit: %d"
msgid "impossible time zone offset: %d"
msgstr "umuligt tidszone: %d"
msgid "invalid day spec: %s"
msgstr ""
msgid "%.0f GB"
msgstr "%.0f GB"
msgid "%.1f GB"
msgstr "%.1f GB"
msgid "%.2f GB"
msgstr "%.2f GB"
msgid "%.0f MB"
msgstr "%.0f MB"
msgid "%.1f MB"
msgstr "%.1f MB"
msgid "%.2f MB"
msgstr "%.2f MB"
msgid "%.0f KB"
msgstr "%.0f KB"
msgid "%.1f KB"
msgstr "%.1f KB"
msgid "%.2f KB"
msgstr "%.2f KB"
msgid "%.0f bytes"
msgstr "%.0f bytes"
msgid "cannot verify bundle or remote repos"
msgstr ""
msgid "interrupted"
msgstr "afbrudt"
msgid "empty or missing %s"
msgstr "tom eller mangler"
msgid "data length off by %d bytes"
msgstr ""
msgid "index contains %d extra bytes"
msgstr "indekset indeholder %d ekstra bytes"
msgid "warning: `%s' uses revlog format 1"
msgstr "advarsel: '%s' bruger revlog format 1"
msgid "warning: `%s' uses revlog format 0"
msgstr "advarsel: '%s' bruger revlog format 0"
msgid "rev %d point to %s changeset %d"
msgstr ""
msgid " (expected %s)"
msgstr " (forventede %s)"
msgid "unknown parent 1 %s of %s"
msgstr "ukendt forældre 1 %s til %s"
msgid "unknown parent 2 %s of %s"
msgstr "ukendt forældre 2 %s til %s"
msgid "checking parents of %s"
msgstr "tjekkre forældrene til %s"
msgid "duplicate revision %d (%d)"
msgstr "duplikeret revision %d (%d)"
msgid "repository uses revlog format %d\n"
msgstr "arkivet bruger revlog format %d\n"
msgid "checking changesets\n"
msgstr "tjekker ændringer\n"
msgid "unpacking changeset %s"
msgstr "udpakker ændring %s"
msgid "checking manifests\n"
msgstr ""
msgid "file without name in manifest"
msgstr ""
msgid "reading manifest delta %s"
msgstr ""
msgid "crosschecking files in changesets and manifests\n"
msgstr ""
msgid "changeset refers to unknown manifest %s"
msgstr ""
msgid "in changeset but not in manifest"
msgstr ""
msgid "in manifest but not in changeset"
msgstr ""
msgid "checking files\n"
msgstr "tjekker filer\n"
msgid "cannot decode filename '%s'"
msgstr "kan ikke dekode filnavn '%s'"
msgid "missing revlog!"
msgstr "manglende revlog!"
msgid "%s not in manifests"
msgstr ""
msgid "unpacked size is %s, %s expected"
msgstr "udpakket størrelse er %s, forventede %s"
msgid "unpacking %s"
msgstr "udpakker %s"
msgid "empty or missing copy source revlog %s:%s"
msgstr ""
msgid "warning: %s@%s: copy source revision is nullid %s:%s"
msgstr ""
msgid "checking rename of %s"
msgstr "tjekker omdøbning af %s"
msgid "%s in manifests not found"
msgstr ""
msgid "warning: orphan revlog '%s'"
msgstr "advarsel: forældreløs revlog '%s'"
msgid "%d files, %d changesets, %d total revisions\n"
msgstr "%d filer, %d ændringer, ialt %d revisioner\n"
msgid "%d warnings encountered!\n"
msgstr "mødte %d advarsler!\n"
msgid "%d integrity errors encountered!\n"
msgstr "fandt %d integritetsfejl!\n"
msgid "(first damaged changeset appears to be %d)\n"
msgstr "(første beskadigede ændring er tilsyneladende %d)\n"
#~ msgid "No patches applied\n"
#~ msgstr "Ingen rettelser er anvendt\n"