Mercurial > hg
view tests/test-rebase-pull.t @ 28189:fac3a24be50e
rebase: choose default destination the same way as 'hg merge' (BC)
This changeset finally make 'hg rebase' choose its default destination using the
same logic as 'hg merge'. The previous default was "tipmost changeset on the
current branch", the new default is "the other head if there is only one". This
change has multiple consequences:
- Multiple tests which were not rebasing anything (rebasing from tipmost head)
are now rebasing on the other "lower" branch. This is the expected new
behavior.
- A test is now explicitly aborting when there is too many heads on the branch.
This is the expected behavior.
- We gained a better detection of the "nothing to rebase" case while performing
'hg pull --rebase' so the message have been updated. Making clearer than an
update was performed and why. This is beneficial side-effect.
- Rebasing from an active bookmark will behave the same as 'hg merge' from a
bookmark.
author | Pierre-Yves David <pierre-yves.david@fb.com> |
---|---|
date | Sun, 14 Feb 2016 13:25:59 +0000 |
parents | 0e3835c7e1cf |
children | d7af9b4ae7dd |
line wrap: on
line source
$ cat >> $HGRCPATH <<EOF > [extensions] > rebase= > > [alias] > tglog = log -G --template "{rev}: '{desc}' {branches}\n" > EOF $ hg init a $ cd a $ echo C1 > C1 $ hg ci -Am C1 adding C1 $ echo C2 > C2 $ hg ci -Am C2 adding C2 $ cd .. $ hg clone a b updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg clone a c updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd b $ echo L1 > L1 $ hg ci -Am L1 adding L1 $ cd ../a $ echo R1 > R1 $ hg ci -Am R1 adding R1 $ cd ../b Now b has one revision to be pulled from a: $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 2:ff8d69a621f9 "L1" saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob) $ hg tglog @ 3: 'L1' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' Re-run: $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes no changes found Invoke pull --rebase and nothing to rebase: $ cd ../c $ hg book norebase $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files nothing to rebase - updating instead 1 files updated, 0 files merged, 0 files removed, 0 files unresolved updating bookmark norebase $ hg tglog -l 1 @ 2: 'R1' | pull --rebase --update should ignore --update: $ hg pull --rebase --update pulling from $TESTTMP/a (glob) searching for changes no changes found pull --rebase doesn't update if nothing has been pulled: $ hg up -q 1 $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes no changes found $ hg tglog -l 1 o 2: 'R1' | $ cd .. pull --rebase works when a specific revision is pulled (issue3619) $ cd a $ hg tglog @ 2: 'R1' | o 1: 'C2' | o 0: 'C1' $ echo R2 > R2 $ hg ci -Am R2 adding R2 $ echo R3 > R3 $ hg ci -Am R3 adding R3 $ cd ../c $ hg tglog o 2: 'R1' | @ 1: 'C2' | o 0: 'C1' $ echo L1 > L1 $ hg ci -Am L1 adding L1 created new head $ hg pull --rev tip --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files rebasing 3:ff8d69a621f9 "L1" saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob) $ hg tglog @ 5: 'L1' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' pull --rebase works with bundle2 turned on $ cd ../a $ echo R4 > R4 $ hg ci -Am R4 adding R4 $ hg tglog @ 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' $ cd ../c $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 5:518d153c0ba3 "L1" saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-backup.hg (glob) $ hg tglog @ 6: 'L1' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' pull --rebase only update if there is nothing to rebase $ cd ../a $ echo R5 > R5 $ hg ci -Am R5 adding R5 $ hg tglog @ 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' $ cd ../c $ echo L2 > L2 $ hg ci -Am L2 adding L2 $ hg up 'desc(L1)' 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 6:0d0727eb7ce0 "L1" rebasing 7:c1f58876e3bf "L2" saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-backup.hg (glob) $ hg tglog o 8: 'L2' | @ 7: 'L1' | o 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' pull --rebase update (no rebase) use proper update: - warn about other head. $ cd ../a $ echo R6 > R6 $ hg ci -Am R6 adding R6 $ cd ../c $ hg up 'desc(R5)' 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) nothing to rebase - updating instead 1 files updated, 0 files merged, 0 files removed, 0 files unresolved 1 other heads for branch "default" $ hg tglog @ 9: 'R6' | | o 8: 'L2' | | | o 7: 'L1' |/ o 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1'