view tests/test-revert-interactive.t @ 37048:fc5e261915b9

wireproto: require POST for all HTTPv2 requests

Wire protocol version 1 transfers argument data via request
headers by default. This has historically caused problems because
servers institute limits on the length of individual HTTP headers
as well as the total size of all request headers. Mercurial servers
can advertise the maximum length of an individual header. But
there's no guarantee any intermediate HTTP agents will accept
headers up to that length.

In the existing wire protocol, server operators typically also
key off the HTTP request method to implement authentication.
For example, GET requests translate to read-only requests and
can be allowed. But read-write commands must use POST and require
authentication. This has typically worked because the only wire
protocol commands that use POST modify the repo (e.g. the
"unbundle" command).

There is an experimental feature to enable clients to transmit
argument data via POST request bodies. This is technically a
better and more robust solution. But we can't enable it by default
because of servers assuming POST means write access.

In version 2 of the wire protocol, the permissions of a request
are encoded in the URL. And with it being a new protocol in a new
URL space, we're not constrained by backwards compatibility
requirements.

This commit adopts the technically superior mechanism of using
HTTP request bodies to send argument data by requiring POST for
all commands. Strictly speaking, it may be possible to send
request bodies on GET requests. But my experience is that not all
HTTP stacks support this. POST pretty much always works. Using POST
for read-only operations does sacrifice some RESTful design
purity. But this API cares about practicality, not about being
in Roy T. Fielding's REST ivory tower.

There's a chance we may relax this restriction in the future. But
for now, I want to see how far we can get with a POST only API.

Differential Revision: https://phab.mercurial-scm.org/D2837

Revert interactive tests
1 add and commit file f
2 add commit file folder1/g
3 add and commit file folder2/h
4 add and commit file folder1/i
5 commit change to file f
6 commit changes to files folder1/g folder2/h
7 commit changes to files folder1/g folder2/h
8 revert interactive to commit id 2 (line 3 above), check that folder1/i is removed and
9 make workdir match 7
10 run the same test than 8 from within folder1 and check same expectations

  $ cat <<EOF >> $HGRCPATH
  > [ui]
  > interactive = true
  > [extensions]
  > record =
  > purge = 
  > EOF


  $ mkdir -p a/folder1 a/folder2
  $ cd a
  $ hg init
  >>> open('f', 'wb').write("1\n2\n3\n4\n5\n")
  $ hg add f ; hg commit -m "adding f"
  $ cat f > folder1/g ; hg add folder1/g ; hg commit -m "adding folder1/g"
  $ cat f > folder2/h ; hg add folder2/h ; hg commit -m "adding folder2/h"
  $ cat f > folder1/i ; hg add folder1/i ; hg commit -m "adding folder1/i"
  >>> open('f', 'wb').write("a\n1\n2\n3\n4\n5\nb\n")
  $ hg commit -m "modifying f"
  >>> open('folder1/g', 'wb').write("c\n1\n2\n3\n4\n5\nd\n")
  $ hg commit -m "modifying folder1/g"
  >>> open('folder2/h', 'wb').write("e\n1\n2\n3\n4\n5\nf\n")
  $ hg commit -m "modifying folder2/h"
  $ hg tip
  changeset:   6:59dd6e4ab63a
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modifying folder2/h
  
  $ hg revert -i -r 2 --all -- << EOF
  > y
  > y
  > y
  > y
  > y
  > ?
  > y
  > n
  > n
  > EOF
  reverting f
  reverting folder1/g
  removing folder1/i
  reverting folder2/h
  remove added file folder1/i (Yn)? y
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  apply change 1/6 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  apply change 2/6 to 'f'? [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -c
   1
   2
   3
   4
   5
  apply change 3/6 to 'folder1/g'? [Ynesfdaq?] ?
  
  y - yes, apply this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - apply remaining changes to this file
  d - done, skip remaining changes and files
  a - apply all changes to all remaining files
  q - quit, applying no changes
  ? - ? (display help)
  apply change 3/6 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -d
  apply change 4/6 to 'folder1/g'? [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'? [Ynesfdaq?] n
  
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f

Test that --interactive lift the need for --all

  $ echo q | hg revert -i -r 2
  reverting folder1/g
  reverting folder2/h
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] q
  
  abort: user quit
  [255]
  $ ls folder1/
  g

Test that a noop revert doesn't do an unnecessary backup
  $ (echo y; echo n) | hg revert -i -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -3,4 +3,3 @@
   3
   4
   5
  -d
  apply this change to 'folder1/g'? [Ynesfdaq?] n
  
  $ ls folder1/
  g

Test --no-backup
  $ (echo y; echo y) | hg revert -i -C -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -3,4 +3,3 @@
   3
   4
   5
  -d
  apply this change to 'folder1/g'? [Ynesfdaq?] y
  
  $ ls folder1/
  g
  >>> open('folder1/g', 'wb').write("1\n2\n3\n4\n5\nd\n")


  $ hg update -C 6
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg revert -i -r 2 --all -- << EOF
  > n
  > y
  > y
  > y
  > y
  > y
  > n
  > n
  > EOF
  reverting f
  reverting folder1/g
  removing folder1/i
  reverting folder2/h
  remove added file folder1/i (Yn)? n
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  apply change 1/6 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  apply change 2/6 to 'f'? [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -c
   1
   2
   3
   4
   5
  apply change 3/6 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -d
  apply change 4/6 to 'folder1/g'? [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'? [Ynesfdaq?] n
  
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f
  $ hg st
  M f
  M folder1/g
  $ hg revert --interactive f << EOF
  > y
  > ?
  > y
  > n
  > n
  > EOF
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  discard change 1/2 to 'f'? [Ynesfdaq?] ?
  
  y - yes, discard this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - discard remaining changes to this file
  d - done, skip remaining changes and files
  a - discard all changes to all remaining files
  q - quit, discarding no changes
  ? - ? (display help)
  discard change 1/2 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  discard change 2/2 to 'f'? [Ynesfdaq?] n
  
  $ hg st
  M f
  M folder1/g
  ? f.orig
  $ cat f
  a
  1
  2
  3
  4
  5
  $ cat f.orig
  1
  2
  3
  4
  5
  $ rm f.orig
  $ hg update -C .
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check editing files newly added by a revert

1) Create a dummy editor changing 1 to 42
  $ cat > $TESTTMP/editor.sh << '__EOF__'
  > cat "$1"  | sed "s/1/42/g"  > tt
  > mv tt  "$1"
  > __EOF__

2) Add k
  $ printf "1\n" > k
  $ hg add k
  $ hg commit -m "add k"

3) Use interactive revert with editing (replacing +1 with +42):
  $ printf "0\n2\n" > k
  $ HGEDITOR="\"sh\" \"${TESTTMP}/editor.sh\"" hg revert -i  <<EOF
  > y
  > e
  > EOF
  reverting k
  diff --git a/k b/k
  1 hunks, 2 lines changed
  examine changes to 'k'? [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
  -1
  +0
  +2
  discard this change to 'k'? [Ynesfdaq?] e
  
  $ cat k
  42

  $ hg update -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg purge
  $ touch newfile
  $ hg add newfile
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > n
  > EOF
  forgetting newfile
  forget added file newfile (Yn)? n
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > y
  > EOF
  forgetting newfile
  forget added file newfile (Yn)? y
  $ hg status
  ? newfile

When a line without EOL is selected during "revert -i" (issue5651)

  $ hg init $TESTTMP/revert-i-eol
  $ cd $TESTTMP/revert-i-eol
  $ echo 0 > a
  $ hg ci -qAm 0
  $ printf 1 >> a
  $ hg ci -qAm 1
  $ cat a
  0
  1 (no-eol)

  $ hg revert -ir'.^' <<EOF
  > y
  > y
  > EOF
  reverting a
  diff --git a/a b/a
  1 hunks, 1 lines changed
  examine changes to 'a'? [Ynesfdaq?] y
  
  @@ -1,2 +1,1 @@
   0
  -1
  \ No newline at end of file
  apply this change to 'a'? [Ynesfdaq?] y
  
  $ cat a
  0

When specified pattern does not exist, we should exit early (issue5789).

  $ hg files
  a
  $ hg rev b
  b: no such file in rev b40d1912accf
  $ hg rev -i b
  b: no such file in rev b40d1912accf

  $ cd ..