view mercurial/dagutil.py @ 29375:fcaf20175b1b

demandimport: delay loading for "from a import b" with absolute_import

Before this patch, "from a import b" doesn't delay loading module "b",
if absolute_import is enabled, even though "from . import b" does.

For example:

  - it is assumed that extension X has "from P import M" for module M
    under package P with absolute_import feature

  - if importing module M is already delayed before loading extension
    X, loading module M in extension X is delayed until actually
    referring

    util, cmdutil, scmutil or so of Mercurial itself should be
    imported by "from . import M" style before loading extension X

  - otherwise, module M is loaded immediately at loading extension X,
    even if extension X itself isn't used at that "hg" command invocation

    Some minor modules (e.g. filemerge or so) of Mercurial itself
    aren't imported by "from . import M" style before loading
    extension X. And of course, external libraries aren't, too.

This might cause startup performance problem of hg command, because
many bundled extensions already enable absolute_import feature.

To delay loading module for "from a import b" with absolute_import
feature, this patch does below in "from a (or .a) import b" with
absolute_import case:

  1. import root module of "name" by system built-in __import__
     (referred as _origimport)

  2. recurse down the module chain for hierarchical "name"

     This logic can be shared with non absolute_import
     case. Therefore, this patch also centralizes it into chainmodules().

  3. and fall through to process elements in "fromlist" for the leaf
     module of "name"

     Processing elements in "fromlist" is executed in the code path
     after "if _pypy: .... else: ..." clause. Therefore, this patch
     replaces "if _pypy:" with "elif _pypy:" to share it.

At 4f1144c3c72b introducing original "work around" for "from a import
b" case, elements in "fromlist" were imported with "level=level". But
"level" might be grater than 1 (e.g. level=2 in "from .. import b"
case) at demandimport() invocation, and importing direct sub-module in
"fromlist" with level grater than 1 causes unexpected result.

IMHO, this seems main reason of "errors for unknown reason" described
in 4f1144c3c72b, and we don't have to worry about it, because this
issue was already fixed by 78d05778907b.

This is reason why this patch removes "errors for unknown reasons"
comment.

# dagutil.py - dag utilities for mercurial
#
# Copyright 2010 Benoit Boissinot <[e-mail]>
# and Peter Arrenbrecht <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

from .i18n import _
from .node import nullrev

class basedag(object):
    '''generic interface for DAGs

    terms:
    "ix" (short for index) identifies a nodes internally,
    "id" identifies one externally.

    All params are ixs unless explicitly suffixed otherwise.
    Pluralized params are lists or sets.
    '''

    def __init__(self):
        self._inverse = None

    def nodeset(self):
        '''set of all node ixs'''
        raise NotImplementedError

    def heads(self):
        '''list of head ixs'''
        raise NotImplementedError

    def parents(self, ix):
        '''list of parents ixs of ix'''
        raise NotImplementedError

    def inverse(self):
        '''inverse DAG, where parents becomes children, etc.'''
        raise NotImplementedError

    def ancestorset(self, starts, stops=None):
        '''
        set of all ancestors of starts (incl), but stop walk at stops (excl)
        '''
        raise NotImplementedError

    def descendantset(self, starts, stops=None):
        '''
        set of all descendants of starts (incl), but stop walk at stops (excl)
        '''
        return self.inverse().ancestorset(starts, stops)

    def headsetofconnecteds(self, ixs):
        '''
        subset of connected list of ixs so that no node has a descendant in it

        By "connected list" we mean that if an ancestor and a descendant are in
        the list, then so is at least one path connecting them.
        '''
        raise NotImplementedError

    def externalize(self, ix):
        '''return a node id'''
        return self._externalize(ix)

    def externalizeall(self, ixs):
        '''return a list of (or set if given a set) of node ids'''
        ids = self._externalizeall(ixs)
        if isinstance(ixs, set):
            return set(ids)
        return list(ids)

    def internalize(self, id):
        '''return a node ix'''
        return self._internalize(id)

    def internalizeall(self, ids, filterunknown=False):
        '''return a list of (or set if given a set) of node ixs'''
        ixs = self._internalizeall(ids, filterunknown)
        if isinstance(ids, set):
            return set(ixs)
        return list(ixs)


class genericdag(basedag):
    '''generic implementations for DAGs'''

    def ancestorset(self, starts, stops=None):
        if stops:
            stops = set(stops)
        else:
            stops = set()
        seen = set()
        pending = list(starts)
        while pending:
            n = pending.pop()
            if n not in seen and n not in stops:
                seen.add(n)
                pending.extend(self.parents(n))
        return seen

    def headsetofconnecteds(self, ixs):
        hds = set(ixs)
        if not hds:
            return hds
        for n in ixs:
            for p in self.parents(n):
                hds.discard(p)
        assert hds
        return hds


class revlogbaseddag(basedag):
    '''generic dag interface to a revlog'''

    def __init__(self, revlog, nodeset):
        basedag.__init__(self)
        self._revlog = revlog
        self._heads = None
        self._nodeset = nodeset

    def nodeset(self):
        return self._nodeset

    def heads(self):
        if self._heads is None:
            self._heads = self._getheads()
        return self._heads

    def _externalize(self, ix):
        return self._revlog.index[ix][7]
    def _externalizeall(self, ixs):
        idx = self._revlog.index
        return [idx[i][7] for i in ixs]

    def _internalize(self, id):
        ix = self._revlog.rev(id)
        if ix == nullrev:
            raise LookupError(id, self._revlog.indexfile, _('nullid'))
        return ix
    def _internalizeall(self, ids, filterunknown):
        rl = self._revlog
        if filterunknown:
            return [r for r in map(rl.nodemap.get, ids)
                    if (r is not None
                        and r != nullrev
                        and r not in rl.filteredrevs)]
        return map(self._internalize, ids)


class revlogdag(revlogbaseddag):
    '''dag interface to a revlog'''

    def __init__(self, revlog):
        revlogbaseddag.__init__(self, revlog, set(revlog))

    def _getheads(self):
        return [r for r in self._revlog.headrevs() if r != nullrev]

    def parents(self, ix):
        rlog = self._revlog
        idx = rlog.index
        revdata = idx[ix]
        prev = revdata[5]
        if prev != nullrev:
            prev2 = revdata[6]
            if prev2 == nullrev:
                return [prev]
            return [prev, prev2]
        prev2 = revdata[6]
        if prev2 != nullrev:
            return [prev2]
        return []

    def inverse(self):
        if self._inverse is None:
            self._inverse = inverserevlogdag(self)
        return self._inverse

    def ancestorset(self, starts, stops=None):
        rlog = self._revlog
        idx = rlog.index
        if stops:
            stops = set(stops)
        else:
            stops = set()
        seen = set()
        pending = list(starts)
        while pending:
            rev = pending.pop()
            if rev not in seen and rev not in stops:
                seen.add(rev)
                revdata = idx[rev]
                for i in [5, 6]:
                    prev = revdata[i]
                    if prev != nullrev:
                        pending.append(prev)
        return seen

    def headsetofconnecteds(self, ixs):
        if not ixs:
            return set()
        rlog = self._revlog
        idx = rlog.index
        headrevs = set(ixs)
        for rev in ixs:
            revdata = idx[rev]
            for i in [5, 6]:
                prev = revdata[i]
                if prev != nullrev:
                    headrevs.discard(prev)
        assert headrevs
        return headrevs

    def linearize(self, ixs):
        '''linearize and topologically sort a list of revisions

        The linearization process tries to create long runs of revs where
        a child rev comes immediately after its first parent. This is done by
        visiting the heads of the given revs in inverse topological order,
        and for each visited rev, visiting its second parent, then its first
        parent, then adding the rev itself to the output list.
        '''
        sorted = []
        visit = list(self.headsetofconnecteds(ixs))
        visit.sort(reverse=True)
        finished = set()

        while visit:
            cur = visit.pop()
            if cur < 0:
                cur = -cur - 1
                if cur not in finished:
                    sorted.append(cur)
                    finished.add(cur)
            else:
                visit.append(-cur - 1)
                visit += [p for p in self.parents(cur)
                          if p in ixs and p not in finished]
        assert len(sorted) == len(ixs)
        return sorted


class inverserevlogdag(revlogbaseddag, genericdag):
    '''inverse of an existing revlog dag; see revlogdag.inverse()'''

    def __init__(self, orig):
        revlogbaseddag.__init__(self, orig._revlog, orig._nodeset)
        self._orig = orig
        self._children = {}
        self._roots = []
        self._walkfrom = len(self._revlog) - 1

    def _walkto(self, walkto):
        rev = self._walkfrom
        cs = self._children
        roots = self._roots
        idx = self._revlog.index
        while rev >= walkto:
            data = idx[rev]
            isroot = True
            for prev in [data[5], data[6]]: # parent revs
                if prev != nullrev:
                    cs.setdefault(prev, []).append(rev)
                    isroot = False
            if isroot:
                roots.append(rev)
            rev -= 1
        self._walkfrom = rev

    def _getheads(self):
        self._walkto(nullrev)
        return self._roots

    def parents(self, ix):
        if ix is None:
            return []
        if ix <= self._walkfrom:
            self._walkto(ix)
        return self._children.get(ix, [])

    def inverse(self):
        return self._orig