view mercurial/treediscovery.py @ 29375:fcaf20175b1b

demandimport: delay loading for "from a import b" with absolute_import

Before this patch, "from a import b" doesn't delay loading module "b",
if absolute_import is enabled, even though "from . import b" does.

For example:

  - it is assumed that extension X has "from P import M" for module M
    under package P with absolute_import feature

  - if importing module M is already delayed before loading extension
    X, loading module M in extension X is delayed until actually
    referring

    util, cmdutil, scmutil or so of Mercurial itself should be
    imported by "from . import M" style before loading extension X

  - otherwise, module M is loaded immediately at loading extension X,
    even if extension X itself isn't used at that "hg" command invocation

    Some minor modules (e.g. filemerge or so) of Mercurial itself
    aren't imported by "from . import M" style before loading
    extension X. And of course, external libraries aren't, too.

This might cause startup performance problem of hg command, because
many bundled extensions already enable absolute_import feature.

To delay loading module for "from a import b" with absolute_import
feature, this patch does below in "from a (or .a) import b" with
absolute_import case:

  1. import root module of "name" by system built-in __import__
     (referred as _origimport)

  2. recurse down the module chain for hierarchical "name"

     This logic can be shared with non absolute_import
     case. Therefore, this patch also centralizes it into chainmodules().

  3. and fall through to process elements in "fromlist" for the leaf
     module of "name"

     Processing elements in "fromlist" is executed in the code path
     after "if _pypy: .... else: ..." clause. Therefore, this patch
     replaces "if _pypy:" with "elif _pypy:" to share it.

At 4f1144c3c72b introducing original "work around" for "from a import
b" case, elements in "fromlist" were imported with "level=level". But
"level" might be grater than 1 (e.g. level=2 in "from .. import b"
case) at demandimport() invocation, and importing direct sub-module in
"fromlist" with level grater than 1 causes unexpected result.

IMHO, this seems main reason of "errors for unknown reason" described
in 4f1144c3c72b, and we don't have to worry about it, because this
issue was already fixed by 78d05778907b.

This is reason why this patch removes "errors for unknown reasons"
comment.

# discovery.py - protocol changeset discovery functions
#
# Copyright 2010 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import collections

from .i18n import _
from .node import (
    nullid,
    short,
)
from . import (
    error,
)

def findcommonincoming(repo, remote, heads=None, force=False):
    """Return a tuple (common, fetch, heads) used to identify the common
    subset of nodes between repo and remote.

    "common" is a list of (at least) the heads of the common subset.
    "fetch" is a list of roots of the nodes that would be incoming, to be
      supplied to changegroupsubset.
    "heads" is either the supplied heads, or else the remote's heads.
    """

    knownnode = repo.changelog.hasnode
    search = []
    fetch = set()
    seen = set()
    seenbranch = set()
    base = set()

    if not heads:
        heads = remote.heads()

    if repo.changelog.tip() == nullid:
        base.add(nullid)
        if heads != [nullid]:
            return [nullid], [nullid], list(heads)
        return [nullid], [], heads

    # assume we're closer to the tip than the root
    # and start by examining the heads
    repo.ui.status(_("searching for changes\n"))

    unknown = []
    for h in heads:
        if not knownnode(h):
            unknown.append(h)
        else:
            base.add(h)

    if not unknown:
        return list(base), [], list(heads)

    req = set(unknown)
    reqcnt = 0

    # search through remote branches
    # a 'branch' here is a linear segment of history, with four parts:
    # head, root, first parent, second parent
    # (a branch always has two parents (or none) by definition)
    unknown = collections.deque(remote.branches(unknown))
    while unknown:
        r = []
        while unknown:
            n = unknown.popleft()
            if n[0] in seen:
                continue

            repo.ui.debug("examining %s:%s\n"
                          % (short(n[0]), short(n[1])))
            if n[0] == nullid: # found the end of the branch
                pass
            elif n in seenbranch:
                repo.ui.debug("branch already found\n")
                continue
            elif n[1] and knownnode(n[1]): # do we know the base?
                repo.ui.debug("found incomplete branch %s:%s\n"
                              % (short(n[0]), short(n[1])))
                search.append(n[0:2]) # schedule branch range for scanning
                seenbranch.add(n)
            else:
                if n[1] not in seen and n[1] not in fetch:
                    if knownnode(n[2]) and knownnode(n[3]):
                        repo.ui.debug("found new changeset %s\n" %
                                      short(n[1]))
                        fetch.add(n[1]) # earliest unknown
                    for p in n[2:4]:
                        if knownnode(p):
                            base.add(p) # latest known

                for p in n[2:4]:
                    if p not in req and not knownnode(p):
                        r.append(p)
                        req.add(p)
            seen.add(n[0])

        if r:
            reqcnt += 1
            repo.ui.progress(_('searching'), reqcnt, unit=_('queries'))
            repo.ui.debug("request %d: %s\n" %
                        (reqcnt, " ".join(map(short, r))))
            for p in xrange(0, len(r), 10):
                for b in remote.branches(r[p:p + 10]):
                    repo.ui.debug("received %s:%s\n" %
                                  (short(b[0]), short(b[1])))
                    unknown.append(b)

    # do binary search on the branches we found
    while search:
        newsearch = []
        reqcnt += 1
        repo.ui.progress(_('searching'), reqcnt, unit=_('queries'))
        for n, l in zip(search, remote.between(search)):
            l.append(n[1])
            p = n[0]
            f = 1
            for i in l:
                repo.ui.debug("narrowing %d:%d %s\n" % (f, len(l), short(i)))
                if knownnode(i):
                    if f <= 2:
                        repo.ui.debug("found new branch changeset %s\n" %
                                          short(p))
                        fetch.add(p)
                        base.add(i)
                    else:
                        repo.ui.debug("narrowed branch search to %s:%s\n"
                                      % (short(p), short(i)))
                        newsearch.append((p, i))
                    break
                p, f = i, f * 2
            search = newsearch

    # sanity check our fetch list
    for f in fetch:
        if knownnode(f):
            raise error.RepoError(_("already have changeset ")
                                  + short(f[:4]))

    base = list(base)
    if base == [nullid]:
        if force:
            repo.ui.warn(_("warning: repository is unrelated\n"))
        else:
            raise error.Abort(_("repository is unrelated"))

    repo.ui.debug("found new changesets starting at " +
                 " ".join([short(f) for f in fetch]) + "\n")

    repo.ui.progress(_('searching'), None)
    repo.ui.debug("%d total queries\n" % reqcnt)

    return base, list(fetch), heads