view tests/test-treediscovery-legacy.t @ 22453:fd0f0b0d316d stable

mq: report correct numbers for changing "number of guarded, applied patches"

Before this patch, "hg qselect" may report incorrect numbers for
"number of guarded, applied patches has changed", because it examines
"pushable" of patches by the index not in "the series" but in "applied
patches", even though "mq.pushable()" expects the former.

To report correct numbers for changing "number of guarded, applied
patches", this patch uses the name of applied patch to examine
pushable-ness of it.

This patch also changes the result of existing "hg qselect" tests,
because they doesn't change pushable-ness of already applied patches.

This patch assumes that "hg qselect" focuses on changing pushable-ness
only of already applied patches, because:

  - the report message uses not "previous" (in the series) but
    "applied"

  - the logic to pop patches for --pop/--reapply examines
    pushable-ness only of already applied ones (in fact, there are
    some incorrect code paths)

  $ "$TESTDIR/hghave" killdaemons || exit 80

Tests discovery against servers without getbundle support:

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > logtemplate="{rev} {node|short}: {desc} {branches}\n"
  > EOF
  $ cp $HGRCPATH $HGRCPATH-withcap

  $ CAP="getbundle known changegroupsubset"
  $ . "$TESTDIR/notcapable"
  $ cp $HGRCPATH $HGRCPATH-nocap
  $ cp $HGRCPATH-withcap $HGRCPATH

Prep for test server without branchmap support

  $ CAP="branchmap"
  $ . "$TESTDIR/notcapable"
  $ cp $HGRCPATH $HGRCPATH-nocap-branchmap
  $ cp $HGRCPATH-withcap $HGRCPATH

Setup HTTP server control:

  $ remote=http://localhost:$HGPORT/
  $ export remote
  $ tstart() {
  >   echo '[web]' > $1/.hg/hgrc
  >   echo 'push_ssl = false' >> $1/.hg/hgrc
  >   echo 'allow_push = *' >> $1/.hg/hgrc
  >   cp $HGRCPATH-nocap $HGRCPATH
  >   hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log
  >   cat hg.pid >> $DAEMON_PIDS
  > }
  $ tstop() {
  >   "$TESTDIR/killdaemons.py" $DAEMON_PIDS
  >   cp $HGRCPATH-withcap $HGRCPATH
  > }

Both are empty:

  $ hg init empty1
  $ hg init empty2
  $ tstart empty2
  $ hg incoming -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg outgoing -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull -R empty1 $remote
  pulling from http://localhost:$HGPORT/
  no changes found
  $ hg push -R empty1 $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ tstop

Base repo:

  $ hg init main
  $ cd main
  $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
  $ hg log -G
  o  11 a19bfa7e7328: r11 both
  |
  o  10 8b6bad1512e1: r10 both
  |
  o    9 025829e08038: r9 both
  |\
  | o  8 d8f638ac69e9: r8 name2
  | |
  | o  7 b6b4d315a2ac: r7 name2
  | |
  | o  6 6c6f5d5f3c11: r6 name2
  | |
  | o  5 70314b29987d: r5 name2
  | |
  o |  4 e71dbbc70e03: r4 name1
  | |
  o |  3 2c8d5d5ec612: r3 name1
  | |
  o |  2 a7892891da29: r2 name1
  |/
  o  1 0019a3b924fd: r1
  |
  o  0 d57206cc072a: r0
  
  $ cd ..
  $ tstart main

Full clone:

  $ hg clone main full
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd full
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is empty:

  $ cd empty1
  $ hg incoming $remote --rev name1
  comparing with http://localhost:$HGPORT/
  abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
  [255]
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 12 changesets with 24 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is subset:

  $ cp $HGRCPATH-withcap $HGRCPATH
  $ hg clone main subset --rev name2 ; cd subset
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cp $HGRCPATH-nocap $HGRCPATH
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Remote is empty:

  $ tstop ; tstart empty2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 12 changesets with 24 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is superset:

  $ tstop
  $ hg clone main subset2 --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ tstart subset2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: push creates new remote branches: both, name1!
  (use 'hg push --new-branch' to create new remote branches)
  [255]
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 6 changesets with 12 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Partial pull:

  $ tstop ; tstart main
  $ hg clone $remote partial --rev name2
  abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
  [255]
  $ hg init partial; cd partial
  $ hg incoming $remote --rev name2
  comparing with http://localhost:$HGPORT/
  abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
  [255]
  $ hg pull $remote --rev name2
  pulling from http://localhost:$HGPORT/
  abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
  [255]
  $ cd ..

  $ tstop

Exercise pushing to server without branchmap capability

  $ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap
  $ hg init rlocal
  $ cd rlocal
  $ echo A > A
  $ hg ci -Am A
  adding A
  $ cd ..
  $ hg clone rlocal rremote
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rlocal
  $ echo B > B
  $ hg ci -Am B
  adding B
  $ cd ..
  $ tstart rremote

  $ cd rlocal
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  1 27547f69f254: B 
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

  $ tstop