copies: filter out copies from non-existent source later in _chain()
_changesetforwardcopies() repeatedly calls _chain(). That is very
expensive because _chain() does lookups in the manifest. I hope to
split up the function in two parts: 1) simple chaining, not
considering end points, and 2) filter out files that don't exist in
the end points (and ping-pong copies/renames).
This patches gets us closer to that by moving the check for
non-existent source later in the function. Now there are no more
checks for "src" and "dst" in the first loop; all the filtering of
invalid copies is done in the second loop. The code also looks much
more consistent now.
No measureable impact on `hg debugpathcopies 4.0 4.8`. That shouldn't
be surprising since the only case we're doing more checks now is in
case of chained copies/renames, which are quire rare in practice.
Differential Revision: https://phab.mercurial-scm.org/D6277
============================================
Testing obsolescence markers push: Cases D.1
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category D: Partial Information Case
TestCase 1: Pruned changeset based on missing precursor of something not present
Variants:
# a: explicite push
# b: bare push
D.1 Pruned changeset based on missing precursor of something not present
========================================================================
.. {{{
.. B ⊗
.. |
.. A ◌⇠◔ A'
.. |/
.. ● O
.. }}}
..
.. Markers exist from:
..
.. * `A ø⇠o A'`
.. * B (prune)
..
.. Command run:
..
.. * hg push -r A'
.. * hg push
..
.. Expected exchange:
..
.. * `A ø⇠o A'`
.. * B (prune)
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos D.1
creating test repo for test case D.1
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B
$ hg up -q 0
$ mkcommit A1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
1 new orphan changesets
$ hg prune -d '0 0' 'desc(B)'
obsoleted 1 changesets
$ hg strip --hidden -q 'desc(A0)'
$ hg log -G --hidden
@ e5ea8f9c7314 (draft): A1
|
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
$ cp -R D.1 D.1.a
$ cp -R D.1 D.1.b
Actual Test (explicit push)
---------------------------
$ dotest D.1.a A1
## Running testcase D.1.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Actual Test (base push)
---------------------------
$ dotest D.1.b
## Running testcase D.1.b
## initial state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}