view tests/test-http-api-httpv2.t @ 40326:fed697fa1734

sqlitestore: file storage backend using SQLite

This commit provides an extension which uses SQLite to store file
data (as opposed to revlogs).

As the inline documentation describes, there are still several
aspects to the extension that are incomplete. But it's a start.
The extension does support basic clone, checkout, and commit
workflows, which makes it suitable for simple use cases.

One notable missing feature is support for "bundlerepos." This is
probably responsible for the most test failures when the extension
is activated as part of the test suite.

All revision data is stored in SQLite. Data is stored as zstd
compressed chunks (default if zstd is available), zlib compressed
chunks (default if zstd is not available), or raw chunks (if
configured or if a compressed delta is not smaller than the raw
delta). This makes things very similar to revlogs.

Unlike revlogs, the extension doesn't yet enforce a limit on delta
chain length. This is an obvious limitation and should be addressed.
This is somewhat mitigated by the use of zstd, which is much faster
than zlib to decompress.

There is a dedicated table for storing deltas. Deltas are stored
by the SHA-1 hash of their uncompressed content. The "fileindex" table
has columns that reference the delta for each revision and the base
delta that delta should be applied against. A recursive SQL query
is used to resolve the delta chain along with the delta data.

By storing deltas by hash, we are able to de-duplicate delta storage!
With revlogs, the same deltas in different revlogs would result in
duplicate storage of that delta. In this scheme, inserting the
duplicate delta is a no-op and delta chains simply reference the
existing delta.

When initially implementing this extension, I did not have
content-indexed deltas and deltas could be duplicated across files
(just like revlogs). When I implemented content-indexed deltas, the
size of the SQLite database for a full clone of mozilla-unified
dropped:

before: 2,554,261,504 bytes
after:  2,488,754,176 bytes

Surprisingly, this is still larger than the bytes size of revlog
files:

revlog files: 2,104,861,230 bytes
du -b:        2,254,381,614

I would have expected storage to be smaller since we're not limiting
delta chain length and since we're using zstd instead of zlib. I
suspect the SQLite indexes and per-column overhead account for the
bulk of the differences. (Keep in mind that revlog uses a 64-byte
packed struct for revision index data and deltas are stored without
padding. Aside from the 12 unused bytes in the 32 byte node field,
revlogs are pretty efficient.) Another source of overhead is file
name storage. With revlogs, file names are stored in the filesystem.
But with SQLite, we need to store file names in the database. This is
roughly equivalent to the size of the fncache file, which for the
mozilla-unified repository is ~34MB.

Since the SQLite database isn't append-only and since delta chains
can reference any delta, this opens some interesting possibilities.
For example, we could store deltas in reverse, such that fulltexts
are stored for newer revisions and deltas are applied to reconstruct
older revisions. This is likely a more optimal storage strategy for
version control, as new data tends to be more frequently accessed
than old data. We would obviously need wire protocol support for
transferring revision data from newest to oldest. And we would
probably need some kind of mechanism for "re-encoding" stores. But
it should be doable.

This extension is very much experimental quality. There are a handful
of features that don't work. It probably isn't suitable for day-to-day
use. But it could be used in limited cases (e.g. read-only checkouts
like in CI). And it is also a good proving ground for alternate
storage backends. As we continue to define interfaces for all things
storage, it will be useful to have a viable alternate storage backend
to see how things shake out in practice.

test-storage.py passes on Python 2 and introduces no new test failures on
Python 3. Having the storage-level unit tests has proved to be insanely
useful when developing this extension. Those tests caught numerous bugs
during development and I'm convinced this style of testing is the way
forward for ensuring alternate storage backends work as intended. Of
course, test coverage isn't close to what it needs to be. But it is
a start. And what coverage we have gives me confidence that basic store
functionality is implemented properly.

Differential Revision: https://phab.mercurial-scm.org/D4928

#require no-chg

  $ . $TESTDIR/wireprotohelpers.sh
  $ enabledummycommands

  $ hg init server
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > EOF
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

HTTP v2 protocol not enabled by default

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003 HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 33\r\n
  s>     \r\n
  s>     API exp-http-v2-0003 not enabled\n

Restart server with support for HTTP v2 API

  $ killdaemons.py
  $ enablehttpv2 server
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

Request to unknown command yields 404

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

GET to read-only command yields a 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Missing Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: invalid
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: invalid\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Content-Type header results in 415

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     user-agent: test
  >     content-type: badmedia
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: badmedia\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 415 Unsupported Media Type\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 88\r\n
  s>     \r\n
  s>     client MUST send Content-Type header with value: application/mercurial-exp-framing-0006\n

Request to read-only command works out of the box

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

  $ sendhttpv2peerverbose << EOF
  > command customreadonly
  > EOF
  creating http peer for wire protocol version 2
  sending customreadonly command
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 65\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x15\x00\x00\x01\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041
  s>     X\x1dcustomreadonly bytes response
  s>     \r\n
  received frame(size=31; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  response: gen[
    b'customreadonly bytes response'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

Request to read-write command fails because server is read-only by default

GET to read-write request yields 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Even for unknown commands

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

SSL required by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 403 ssl required\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Length: 17\r\n
  s>     \r\n
  s>     permission denied

Restart server to allow non-ssl read-write operations

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Authorized request for valid read-write command works

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Authorized request for unknown command is rejected

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/badcommand
  >     user-agent: test
  >     accept: $MEDIATYPE
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

debugreflect isn't enabled by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 34\r\n
  s>     \r\n
  s>     debugreflect service not available

Restart server to get debugreflect endpoint

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Command frames can be reflected via debugreflect

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'command1', b'args': {b'foo': b'val1', b'bar1': b'val'}}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 47\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \'\x00\x00\x01\x00\x01\x01\x11\xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 223\r\n
  s>     \r\n
  s>     received: 1 1 1 \xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1\n
  s>     ["runcommand", {"args": {"bar1": "val", "foo": "val1"}, "command": "command1", "data": null, "redirect": null, "requestid": 1}]\n
  s>     received: <no frame>\n
  s>     {"action": "noop"}

Multiple requests to regular command URL are not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Multiple requests to "multirequest" URL are allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  >     frame 3 1 0 command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     *\r\n (glob)
  s>     user-agent: test\r\n
  s>     content-length: 58\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly\x15\x00\x00\x03\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x03\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Interleaved requests to "multirequest" are processed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request continuation JnamespacesDnameHlistkeys
  >     frame 1 1 0 command-request continuation IbookmarksDnameHlistkeys
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 115\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x11\x00\x00\x01\x00\x01\x01\x15\xa2Dargs\xa1Inamespace\x11\x00\x00\x03\x00\x01\x00\x15\xa2Dargs\xa1Inamespace\x19\x00\x00\x03\x00\x01\x00\x12JnamespacesDnameHlistkeys\x18\x00\x00\x01\x00\x01\x00\x12IbookmarksDnameHlistkeys
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x03\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     28\r\n
  s>      \x00\x00\x03\x00\x02\x041\xa3Ibookmarks@Jnamespaces@Fphases@
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     9\r\n
  s>     \x01\x00\x00\x01\x00\x02\x041\xa0
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Restart server to disable read-write access

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Attempting to run a read-write command via multirequest on read-only URL is not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'pushkey'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 22\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x0e\x00\x00\x01\x00\x01\x01\x11\xa1DnameGpushkey
  s> makefile('rb', None)
  s>     HTTP/1.1 403 Forbidden\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 52\r\n
  s>     \r\n
  s>     insufficient permissions to execute command: pushkey

Defining an invalid content encoding results in warning

  $ hg --config experimental.httppeer.v2-encoder-order=identity,badencoder --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  wire protocol version 2 encoder referenced in config (badencoder) is not known; ignoring
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 56\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     1e\r\n
  s>     \x16\x00\x00\x01\x00\x02\x041
  s>     \x81T\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
  s>     \r\n
  received frame(size=22; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#if zstd

  $ hg --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 70\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     *\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x83Hzstd-8mbDzlibHidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hzstd-8mb
  s>     \r\n
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  s>     25\r\n
  s>     \x1d\x00\x00\x01\x00\x02\x042
  s>     (\xb5/\xfd\x00P\xa4\x00\x00p\xa1FstatusBok\x81T\x00\x01\x00\tP\x02
  s>     \r\n
  received frame(size=29; request=1; stream=2; streamflags=encoded; type=command-response; flags=eos)
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#endif

  $ cat error.log