view tests/test-http-bad-server.t @ 40326:fed697fa1734

sqlitestore: file storage backend using SQLite

This commit provides an extension which uses SQLite to store file
data (as opposed to revlogs).

As the inline documentation describes, there are still several
aspects to the extension that are incomplete. But it's a start.
The extension does support basic clone, checkout, and commit
workflows, which makes it suitable for simple use cases.

One notable missing feature is support for "bundlerepos." This is
probably responsible for the most test failures when the extension
is activated as part of the test suite.

All revision data is stored in SQLite. Data is stored as zstd
compressed chunks (default if zstd is available), zlib compressed
chunks (default if zstd is not available), or raw chunks (if
configured or if a compressed delta is not smaller than the raw
delta). This makes things very similar to revlogs.

Unlike revlogs, the extension doesn't yet enforce a limit on delta
chain length. This is an obvious limitation and should be addressed.
This is somewhat mitigated by the use of zstd, which is much faster
than zlib to decompress.

There is a dedicated table for storing deltas. Deltas are stored
by the SHA-1 hash of their uncompressed content. The "fileindex" table
has columns that reference the delta for each revision and the base
delta that delta should be applied against. A recursive SQL query
is used to resolve the delta chain along with the delta data.

By storing deltas by hash, we are able to de-duplicate delta storage!
With revlogs, the same deltas in different revlogs would result in
duplicate storage of that delta. In this scheme, inserting the
duplicate delta is a no-op and delta chains simply reference the
existing delta.

When initially implementing this extension, I did not have
content-indexed deltas and deltas could be duplicated across files
(just like revlogs). When I implemented content-indexed deltas, the
size of the SQLite database for a full clone of mozilla-unified
dropped:

before: 2,554,261,504 bytes
after:  2,488,754,176 bytes

Surprisingly, this is still larger than the bytes size of revlog
files:

revlog files: 2,104,861,230 bytes
du -b:        2,254,381,614

I would have expected storage to be smaller since we're not limiting
delta chain length and since we're using zstd instead of zlib. I
suspect the SQLite indexes and per-column overhead account for the
bulk of the differences. (Keep in mind that revlog uses a 64-byte
packed struct for revision index data and deltas are stored without
padding. Aside from the 12 unused bytes in the 32 byte node field,
revlogs are pretty efficient.) Another source of overhead is file
name storage. With revlogs, file names are stored in the filesystem.
But with SQLite, we need to store file names in the database. This is
roughly equivalent to the size of the fncache file, which for the
mozilla-unified repository is ~34MB.

Since the SQLite database isn't append-only and since delta chains
can reference any delta, this opens some interesting possibilities.
For example, we could store deltas in reverse, such that fulltexts
are stored for newer revisions and deltas are applied to reconstruct
older revisions. This is likely a more optimal storage strategy for
version control, as new data tends to be more frequently accessed
than old data. We would obviously need wire protocol support for
transferring revision data from newest to oldest. And we would
probably need some kind of mechanism for "re-encoding" stores. But
it should be doable.

This extension is very much experimental quality. There are a handful
of features that don't work. It probably isn't suitable for day-to-day
use. But it could be used in limited cases (e.g. read-only checkouts
like in CI). And it is also a good proving ground for alternate
storage backends. As we continue to define interfaces for all things
storage, it will be useful to have a viable alternate storage backend
to see how things shake out in practice.

test-storage.py passes on Python 2 and introduces no new test failures on
Python 3. Having the storage-level unit tests has proved to be insanely
useful when developing this extension. Those tests caught numerous bugs
during development and I'm convinced this style of testing is the way
forward for ensuring alternate storage backends work as intended. Of
course, test coverage isn't close to what it needs to be. But it is
a start. And what coverage we have gives me confidence that basic store
functionality is implemented properly.

Differential Revision: https://phab.mercurial-scm.org/D4928

#require serve zstd

Client version is embedded in HTTP request and is effectively dynamic. Pin the
version so behavior is deterministic.

  $ cat > fakeversion.py << EOF
  > from mercurial import util
  > util.version = lambda: '4.2'
  > EOF

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > fakeversion = `pwd`/fakeversion.py
  > [devel]
  > legacy.exchange = phases
  > EOF

  $ hg init server0
  $ cd server0
  $ touch foo
  $ hg -q commit -A -m initial

Also disable compression because zstd is optional and causes output to vary
and because debugging partial responses is hard when compression is involved

  $ cat > .hg/hgrc << EOF
  > [extensions]
  > badserver = $TESTDIR/badserverext.py
  > [server]
  > compressionengines = none
  > EOF

Failure to accept() socket should result in connection related error message

  $ hg serve --config badserver.closebeforeaccept=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: $ECONNRESET$
  [255]

(The server exits on its own, but there is a race between that and starting a new server.
So ensure the process is dead.)

  $ killdaemons.py $DAEMON_PIDS

Failure immediately after accept() should yield connection related error message

  $ hg serve --config badserver.closeafteraccept=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

TODO: this usually outputs good results, but sometimes emits abort:
error: '' on FreeBSD and OS X.
What we ideally want are:

abort: error: $ECONNRESET$

The flakiness in this output was observable easily with
--runs-per-test=20 on macOS 10.12 during the freeze for 4.2.
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: * (glob)
  [255]

  $ killdaemons.py $DAEMON_PIDS

Failure to read all bytes in initial HTTP request should yield connection related error message

  $ hg serve --config badserver.closeafterrecvbytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(1 from 65537) -> (1) G
  read limit reached; closing socket

  $ rm -f error.log

Same failure, but server reads full HTTP request line

  $ hg serve --config badserver.closeafterrecvbytes=40 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(40 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(7 from -1) -> (7) Accept-
  read limit reached; closing socket

  $ rm -f error.log

Failure on subsequent HTTP request on the same socket (cmd?batch)

  $ hg serve --config badserver.closeafterrecvbytes=210,223 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(210 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(177 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(150 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(115 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 450\r\n
  write(2) -> \r\n
  write(450) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(4? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1? from -1) -> (1?) Accept-Encoding* (glob)
  read limit reached; closing socket
  readline(223 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(197 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(170 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(141 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(100 from -1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(39 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(4 from -1) -> (4) host
  read limit reached; closing socket

  $ rm -f error.log

Failure to read getbundle HTTP request

  $ hg serve --config badserver.closeafterrecvbytes=308,317,304 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(1 from -1) -> (1) x (?)
  readline(1 from -1) -> (1) x (?)
  readline(308 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(275 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(248 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(213 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 450\r\n
  write(2) -> \r\n
  write(450) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(13? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1?? from -1) -> (27) Accept-Encoding: identity\r\n (glob)
  readline(8? from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob)
  readline(5? from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob)
  readline(1? from -1) -> (1?) x-hgproto-1:* (glob)
  read limit reached; closing socket
  readline(317 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(291 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(264 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(235 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(194 from -1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(133 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(98 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(20) -> Content-Length: 42\r\n
  write(2) -> \r\n
  write(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(* from 65537) -> (*) GET /?cmd=getbundle HTTP* (glob)
  read limit reached; closing socket
  readline(304 from 65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(274 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(247 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(218 from -1) -> (218) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtag
  read limit reached; closing socket

  $ rm -f error.log

Now do a variation using POST to send arguments

  $ hg serve --config experimental.httppostargs=true --config badserver.closeafterrecvbytes=329,344 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(329 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(296 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(269 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(234 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: $HTTP_DATE$\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 463\r\n
  write(2) -> \r\n
  write(463) -> batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx httppostargs known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(1?? from 65537) -> (27) POST /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1?? from -1) -> (27) Accept-Encoding: identity\r\n (glob)
  readline(1?? from -1) -> (41) content-type: application/mercurial-0.1\r\n (glob)
  readline(6? from -1) -> (33) vary: X-HgArgs-Post,X-HgProto-1\r\n (glob)
  readline(3? from -1) -> (19) x-hgargs-post: 28\r\n (glob)
  readline(1? from -1) -> (1?) x-hgproto-1: * (glob)
  read limit reached; closing socket
  readline(344 from 65537) -> (27) POST /?cmd=batch HTTP/1.1\r\n
  readline(317 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(290 from -1) -> (41) content-type: application/mercurial-0.1\r\n
  readline(249 from -1) -> (33) vary: X-HgArgs-Post,X-HgProto-1\r\n
  readline(216 from -1) -> (19) x-hgargs-post: 28\r\n
  readline(197 from -1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(136 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(101 from -1) -> (20) content-length: 28\r\n
  readline(81 from -1) -> (*) host: localhost:$HGPORT\r\n (glob)
  readline(* from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(* from -1) -> (2) \r\n (glob)
  read(* from 28) -> (*) cmds=* (glob)
  read limit reached, closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Now move on to partial server responses

Server sends a single character from the HTTP response line

  $ hg serve --config badserver.closeaftersendbytes=1 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: bad HTTP status line: H
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(1 from 36) -> (0) H
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends an incomplete capabilities response body

  $ hg serve --config badserver.closeaftersendbytes=180 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: HTTP request error (incomplete response; expected 450 bytes got 20)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (144) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (121) Server: badhttpserver\r\n
  write(37 from 37) -> (84) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (43) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (22) Content-Length: 450\r\n
  write(2 from 2) -> (20) \r\n
  write(20 from 450) -> (0) batch branchmap bund
  write limit reached; closing socket

  $ rm -f error.log

Server sends incomplete headers for batch request

  $ hg serve --config badserver.closeaftersendbytes=728 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this output is horrible

  $ hg clone http://localhost:$HGPORT/ clone
  abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository:
  ---%<--- (applicat)
  
  ---%<---
  !
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (692) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (669) Server: badhttpserver\r\n
  write(37 from 37) -> (632) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (591) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (570) Content-Length: 450\r\n
  write(2 from 2) -> (568) \r\n
  write(450 from 450) -> (118) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (82) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (59) Server: badhttpserver\r\n
  write(37 from 37) -> (22) Date: $HTTP_DATE$\r\n
  write(22 from 41) -> (0) Content-Type: applicat
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends an incomplete HTTP response body to batch request

  $ hg serve --config badserver.closeaftersendbytes=793 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO client spews a stack due to uncaught ValueError in batch.results()
#if no-chg
  $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null
  [1]
#else
  $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null
  [255]
#endif

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (757) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (734) Server: badhttpserver\r\n
  write(37 from 37) -> (697) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (656) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (635) Content-Length: 450\r\n
  write(2 from 2) -> (633) \r\n
  write(450 from 450) -> (183) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (147) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (124) Server: badhttpserver\r\n
  write(37 from 37) -> (87) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (46) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (26) Content-Length: 42\r\n
  write(2 from 2) -> (24) \r\n
  write(24 from 42) -> (0) 96ee1d7354c4ad7372047672
  write limit reached; closing socket

  $ rm -f error.log

Server sends incomplete headers for getbundle response

  $ hg serve --config badserver.closeaftersendbytes=940 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this output is terrible

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository:
  ---%<--- (application/mercuri)
  
  ---%<---
  !
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (904) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (881) Server: badhttpserver\r\n
  write(37 from 37) -> (844) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (803) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (782) Content-Length: 450\r\n
  write(2 from 2) -> (780) \r\n
  write(450 from 450) -> (330) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (294) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (271) Server: badhttpserver\r\n
  write(37 from 37) -> (234) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (193) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (173) Content-Length: 42\r\n
  write(2 from 2) -> (171) \r\n
  write(42 from 42) -> (129) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (461) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Arev-branch-cache%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (93) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (70) Server: badhttpserver\r\n
  write(37 from 37) -> (33) Date: $HTTP_DATE$\r\n
  write(33 from 41) -> (0) Content-Type: application/mercuri
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server stops before it sends transfer encoding

  $ hg serve --config badserver.closeaftersendbytes=973 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: stream ended unexpectedly (got 0 bytes, expected 1)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -4 error.log
  write(41 from 41) -> (25) Content-Type: application/mercurial-0.2\r\n
  write(25 from 28) -> (0) Transfer-Encoding: chunke
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends empty HTTP body for getbundle

  $ hg serve --config badserver.closeaftersendbytes=978 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (942) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (919) Server: badhttpserver\r\n
  write(37 from 37) -> (882) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (841) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (820) Content-Length: 450\r\n
  write(2 from 2) -> (818) \r\n
  write(450 from 450) -> (368) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (332) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (309) Server: badhttpserver\r\n
  write(37 from 37) -> (272) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (231) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (211) Content-Length: 42\r\n
  write(2 from 2) -> (209) \r\n
  write(42 from 42) -> (167) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (461) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Arev-branch-cache%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (131) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (108) Server: badhttpserver\r\n
  write(37 from 37) -> (71) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (30) Content-Type: application/mercurial-0.2\r\n
  write(28 from 28) -> (2) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (0) \r\n
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends partial compression string

  $ hg serve --config badserver.closeaftersendbytes=1002 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (966) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (943) Server: badhttpserver\r\n
  write(37 from 37) -> (906) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (865) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (844) Content-Length: 450\r\n
  write(2 from 2) -> (842) \r\n
  write(450 from 450) -> (392) batch branchmap $USUAL_BUNDLE2_CAPS_NO_PHASES$ changegroupsubset compression=none getbundle httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (356) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (333) Server: badhttpserver\r\n
  write(37 from 37) -> (296) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (255) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (235) Content-Length: 42\r\n
  write(2 from 2) -> (233) \r\n
  write(42 from 42) -> (191) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (461) x-hgarg-1: bookmarks=1&bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Arev-branch-cache%250Astream%253Dv2&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (61) x-hgproto-1: 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (155) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (132) Server: badhttpserver\r\n
  write(37 from 37) -> (95) Date: $HTTP_DATE$\r\n
  write(41 from 41) -> (54) Content-Type: application/mercurial-0.2\r\n
  write(28 from 28) -> (26) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (24) \r\n
  write(6 from 6) -> (18) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (9) 4\r\nnone\r\n
  write(9 from 9) -> (0) 4\r\nHG20\r\n
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server sends partial bundle2 header magic

  $ hg serve --config badserver.closeaftersendbytes=999 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 4 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -7 error.log
  write(28 from 28) -> (23) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (21) \r\n
  write(6 from 6) -> (15) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (6) 4\r\nnone\r\n
  write(6 from 9) -> (0) 4\r\nHG2
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server sends incomplete bundle2 stream params length

  $ hg serve --config badserver.closeaftersendbytes=1008 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 4 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -8 error.log
  write(28 from 28) -> (32) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (30) \r\n
  write(6 from 6) -> (24) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (15) 4\r\nnone\r\n
  write(9 from 9) -> (6) 4\r\nHG20\r\n
  write(6 from 9) -> (0) 4\\r\\n\x00\x00\x00 (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Servers stops after bundle2 stream params header

  $ hg serve --config badserver.closeaftersendbytes=1011 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -8 error.log
  write(28 from 28) -> (35) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (33) \r\n
  write(6 from 6) -> (27) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (18) 4\r\nnone\r\n
  write(9 from 9) -> (9) 4\r\nHG20\r\n
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after bundle2 part header length

  $ hg serve --config badserver.closeaftersendbytes=1020 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -9 error.log
  write(28 from 28) -> (44) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (42) \r\n
  write(6 from 6) -> (36) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (27) 4\r\nnone\r\n
  write(9 from 9) -> (18) 4\r\nHG20\r\n
  write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after bundle2 part header

  $ hg serve --config badserver.closeaftersendbytes=1067 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -10 error.log
  write(28 from 28) -> (91) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (89) \r\n
  write(6 from 6) -> (83) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (74) 4\r\nnone\r\n
  write(9 from 9) -> (65) 4\r\nHG20\r\n
  write(9 from 9) -> (56) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (47) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (0) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops after bundle2 part payload chunk size

  $ hg serve --config badserver.closeaftersendbytes=1088 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response; expected 466 bytes got 7)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -11 error.log
  write(2 from 2) -> (110) \r\n
  write(6 from 6) -> (104) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (95) 4\r\nnone\r\n
  write(9 from 9) -> (86) 4\r\nHG20\r\n
  write(9 from 9) -> (77) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (68) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (21) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (12) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(12 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1d (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending in middle of bundle2 payload chunk

  $ hg serve --config badserver.closeaftersendbytes=1549 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -12 error.log
  write(28 from 28) -> (573) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (571) \r\n
  write(6 from 6) -> (565) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (556) 4\r\nnone\r\n
  write(9 from 9) -> (547) 4\r\nHG20\r\n
  write(9 from 9) -> (538) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (529) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (482) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (473) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after 0 length payload chunk size

  $ hg serve --config badserver.closeaftersendbytes=1580 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response; expected 32 bytes got 9)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -13 error.log
  write(6 from 6) -> (596) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (587) 4\r\nnone\r\n
  write(9 from 9) -> (578) 4\r\nHG20\r\n
  write(9 from 9) -> (569) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (560) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (513) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (504) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (31) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (22) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (13) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(13 from 38) -> (0) 20\\r\\n\x08LISTKEYS (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after 0 part bundle part header (indicating end of bundle2 payload)
This is before the 0 size chunked transfer part that signals end of HTTP response.

#  $ hg serve --config badserver.closeaftersendbytes=1755 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ hg serve --config badserver.closeaftersendbytes=1862 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 96ee1d7354c4
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py $DAEMON_PIDS

  $ tail -22 error.log
  write(9 from 9) -> (851) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (842) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (795) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (786) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (313) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (304) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (295) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(38 from 38) -> (257) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00	\x06namespacephases\\r\\n (esc)
  write(9 from 9) -> (248) 4\\r\\n\x00\x00\x00:\\r\\n (esc)
  write(64 from 64) -> (184) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c	1\npublishing	True\r\n
  write(9 from 9) -> (175) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (166) 4\\r\\n\x00\x00\x00#\\r\\n (esc)
  write(41 from 41) -> (125) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00		namespacebookmarks\\r\\n (esc)
  write(9 from 9) -> (116) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (107) 4\\r\\n\x00\x00\x00\x1d\\r\\n (esc)
  write(35 from 35) -> (72) 1d\\r\\n\x16cache:rev-branch-cache\x00\x00\x00\x03\x00\x00\\r\\n (esc)
  write(9 from 9) -> (63) 4\\r\\n\x00\x00\x00'\\r\\n (esc)
  write(45 from 45) -> (18) 27\\r\\n\x00\x00\x00\x07\x00\x00\x00\x01\x00\x00\x00\x00default\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\\r\\n (esc)
  write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log
  $ rm -rf clone

Server sends a size 0 chunked-transfer size without terminating \r\n

  $ hg serve --config badserver.closeaftersendbytes=1865 -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 96ee1d7354c4
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py $DAEMON_PIDS

  $ tail -23 error.log
  write(9 from 9) -> (854) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (845) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (798) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (789) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (316) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (307) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (298) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(38 from 38) -> (260) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00	\x06namespacephases\\r\\n (esc)
  write(9 from 9) -> (251) 4\\r\\n\x00\x00\x00:\\r\\n (esc)
  write(64 from 64) -> (187) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c	1\npublishing	True\r\n
  write(9 from 9) -> (178) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (169) 4\\r\\n\x00\x00\x00#\\r\\n (esc)
  write(41 from 41) -> (128) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00		namespacebookmarks\\r\\n (esc)
  write(9 from 9) -> (119) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (110) 4\\r\\n\x00\x00\x00\x1d\\r\\n (esc)
  write(35 from 35) -> (75) 1d\\r\\n\x16cache:rev-branch-cache\x00\x00\x00\x03\x00\x00\\r\\n (esc)
  write(9 from 9) -> (66) 4\\r\\n\x00\x00\x00'\\r\\n (esc)
  write(45 from 45) -> (21) 27\\r\\n\x00\x00\x00\x07\x00\x00\x00\x01\x00\x00\x00\x00default\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\\r\\n (esc)
  write(9 from 9) -> (12) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (3) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(3 from 5) -> (0) 0\r\n
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log
  $ rm -rf clone