view tests/test-http-permissions.t @ 40326:fed697fa1734

sqlitestore: file storage backend using SQLite

This commit provides an extension which uses SQLite to store file
data (as opposed to revlogs).

As the inline documentation describes, there are still several
aspects to the extension that are incomplete. But it's a start.
The extension does support basic clone, checkout, and commit
workflows, which makes it suitable for simple use cases.

One notable missing feature is support for "bundlerepos." This is
probably responsible for the most test failures when the extension
is activated as part of the test suite.

All revision data is stored in SQLite. Data is stored as zstd
compressed chunks (default if zstd is available), zlib compressed
chunks (default if zstd is not available), or raw chunks (if
configured or if a compressed delta is not smaller than the raw
delta). This makes things very similar to revlogs.

Unlike revlogs, the extension doesn't yet enforce a limit on delta
chain length. This is an obvious limitation and should be addressed.
This is somewhat mitigated by the use of zstd, which is much faster
than zlib to decompress.

There is a dedicated table for storing deltas. Deltas are stored
by the SHA-1 hash of their uncompressed content. The "fileindex" table
has columns that reference the delta for each revision and the base
delta that delta should be applied against. A recursive SQL query
is used to resolve the delta chain along with the delta data.

By storing deltas by hash, we are able to de-duplicate delta storage!
With revlogs, the same deltas in different revlogs would result in
duplicate storage of that delta. In this scheme, inserting the
duplicate delta is a no-op and delta chains simply reference the
existing delta.

When initially implementing this extension, I did not have
content-indexed deltas and deltas could be duplicated across files
(just like revlogs). When I implemented content-indexed deltas, the
size of the SQLite database for a full clone of mozilla-unified
dropped:

before: 2,554,261,504 bytes
after:  2,488,754,176 bytes

Surprisingly, this is still larger than the bytes size of revlog
files:

revlog files: 2,104,861,230 bytes
du -b:        2,254,381,614

I would have expected storage to be smaller since we're not limiting
delta chain length and since we're using zstd instead of zlib. I
suspect the SQLite indexes and per-column overhead account for the
bulk of the differences. (Keep in mind that revlog uses a 64-byte
packed struct for revision index data and deltas are stored without
padding. Aside from the 12 unused bytes in the 32 byte node field,
revlogs are pretty efficient.) Another source of overhead is file
name storage. With revlogs, file names are stored in the filesystem.
But with SQLite, we need to store file names in the database. This is
roughly equivalent to the size of the fncache file, which for the
mozilla-unified repository is ~34MB.

Since the SQLite database isn't append-only and since delta chains
can reference any delta, this opens some interesting possibilities.
For example, we could store deltas in reverse, such that fulltexts
are stored for newer revisions and deltas are applied to reconstruct
older revisions. This is likely a more optimal storage strategy for
version control, as new data tends to be more frequently accessed
than old data. We would obviously need wire protocol support for
transferring revision data from newest to oldest. And we would
probably need some kind of mechanism for "re-encoding" stores. But
it should be doable.

This extension is very much experimental quality. There are a handful
of features that don't work. It probably isn't suitable for day-to-day
use. But it could be used in limited cases (e.g. read-only checkouts
like in CI). And it is also a good proving ground for alternate
storage backends. As we continue to define interfaces for all things
storage, it will be useful to have a viable alternate storage backend
to see how things shake out in practice.

test-storage.py passes on Python 2 and introduces no new test failures on
Python 3. Having the storage-level unit tests has proved to be insanely
useful when developing this extension. Those tests caught numerous bugs
during development and I'm convinced this style of testing is the way
forward for ensuring alternate storage backends work as intended. Of
course, test coverage isn't close to what it needs to be. But it is
a start. And what coverage we have gives me confidence that basic store
functionality is implemented properly.

Differential Revision: https://phab.mercurial-scm.org/D4928

  $ cat > fakeremoteuser.py << EOF
  > import os
  > from mercurial.hgweb import hgweb_mod
  > from mercurial import wireprotov1server
  > class testenvhgweb(hgweb_mod.hgweb):
  >     def __call__(self, env, respond):
  >         # Allow REMOTE_USER to define authenticated user.
  >         if r'REMOTE_USER' in os.environ:
  >             env[r'REMOTE_USER'] = os.environ[r'REMOTE_USER']
  >         # Allow REQUEST_METHOD to override HTTP method
  >         if r'REQUEST_METHOD' in os.environ:
  >             env[r'REQUEST_METHOD'] = os.environ[r'REQUEST_METHOD']
  >         return super(testenvhgweb, self).__call__(env, respond)
  > hgweb_mod.hgweb = testenvhgweb
  > 
  > @wireprotov1server.wireprotocommand(b'customreadnoperm')
  > def customread(repo, proto):
  >     return b'read-only command no defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customwritenoperm')
  > def customwritenoperm(repo, proto):
  >     return b'write command no defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customreadwithperm', permission=b'pull')
  > def customreadwithperm(repo, proto):
  >     return b'read-only command w/ defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customwritewithperm', permission=b'push')
  > def customwritewithperm(repo, proto):
  >     return b'write command w/ defined permissions\n'
  > EOF

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > fakeremoteuser = $TESTTMP/fakeremoteuser.py
  > strip =
  > EOF

  $ hg init test
  $ cd test
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ cd ..
  $ hg clone test test2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd test2
  $ echo a >> a
  $ hg ci -mb
  $ hg book bm -r 0
  $ cd ../test

web.deny_read=* prevents access to wire protocol for all users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > deny_read = *
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=* with REMOTE_USER set still locks out clients

  $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> denies access to unauthenticated user

  $ cat > .hg/hgrc <<EOF
  > [web]
  > deny_read = baduser1,baduser2
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> denies access to users in deny list

  $ REMOTE_USER=baduser2 hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> allows access to authenticated users not in list

  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=* allows reads for unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = *
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=* allows read for authenticated user

  $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=<user> does not allow unauthenticated users to read

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = gooduser
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow_read=<user> does not allow user not in list to read

  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow_read=<user> allows read from user in list

  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.deny_read takes precedence over web.allow_read

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = baduser
  > deny_read = baduser
  > EOF

  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-pull=false denies read access to repo

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow-pull = false
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

Attempting a write command with HTTP GET fails

  $ cat > .hg/hgrc <<EOF
  > EOF

  $ REQUEST_METHOD=GET hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg bookmarks
  no bookmarks set
  $ hg bookmark -d bm
  abort: bookmark 'bm' does not exist
  [255]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ killdaemons.py

Attempting a write command with an unknown HTTP verb fails

  $ REQUEST_METHOD=someverb hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg bookmarks
  no bookmarks set
  $ hg bookmark -d bm
  abort: bookmark 'bm' does not exist
  [255]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ killdaemons.py

Pushing on a plaintext channel is disabled by default

  $ cat > .hg/hgrc <<EOF
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  403 ssl required
  
  0
  ssl required
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  403 ssl required
  
  0
  ssl required
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  403 ssl required
  
  0
  ssl required
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  403 ssl required
  
  0
  ssl required
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: HTTP Error 403: ssl required
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: HTTP Error 403: ssl required
  [255]

  $ killdaemons.py

web.deny_push=* denies pushing to unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > deny_push = *
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=* denies pushing to authenticated users

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=<user> denies pushing to user in list

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > deny_push = baduser
  > EOF

  $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=<user> denies pushing to user not in list because allow-push isn't set

  $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push=* allows pushes from unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.allow-push=* allows pushes from authenticated users

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.allow-push=<user> denies push to user not in list

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = gooduser
  > EOF

  $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push=<user> allows push from user in list

  $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.deny_push takes precedence over web.allow_push

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = someuser
  > deny_push = someuser
  > EOF

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push has no effect if web.deny_read is set

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = *
  > deny_read = *
  > EOF

  $ REQUEST_METHOD=POST REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py