Mercurial > hg
view tests/test-install.t @ 40326:fed697fa1734
sqlitestore: file storage backend using SQLite
This commit provides an extension which uses SQLite to store file
data (as opposed to revlogs).
As the inline documentation describes, there are still several
aspects to the extension that are incomplete. But it's a start.
The extension does support basic clone, checkout, and commit
workflows, which makes it suitable for simple use cases.
One notable missing feature is support for "bundlerepos." This is
probably responsible for the most test failures when the extension
is activated as part of the test suite.
All revision data is stored in SQLite. Data is stored as zstd
compressed chunks (default if zstd is available), zlib compressed
chunks (default if zstd is not available), or raw chunks (if
configured or if a compressed delta is not smaller than the raw
delta). This makes things very similar to revlogs.
Unlike revlogs, the extension doesn't yet enforce a limit on delta
chain length. This is an obvious limitation and should be addressed.
This is somewhat mitigated by the use of zstd, which is much faster
than zlib to decompress.
There is a dedicated table for storing deltas. Deltas are stored
by the SHA-1 hash of their uncompressed content. The "fileindex" table
has columns that reference the delta for each revision and the base
delta that delta should be applied against. A recursive SQL query
is used to resolve the delta chain along with the delta data.
By storing deltas by hash, we are able to de-duplicate delta storage!
With revlogs, the same deltas in different revlogs would result in
duplicate storage of that delta. In this scheme, inserting the
duplicate delta is a no-op and delta chains simply reference the
existing delta.
When initially implementing this extension, I did not have
content-indexed deltas and deltas could be duplicated across files
(just like revlogs). When I implemented content-indexed deltas, the
size of the SQLite database for a full clone of mozilla-unified
dropped:
before: 2,554,261,504 bytes
after: 2,488,754,176 bytes
Surprisingly, this is still larger than the bytes size of revlog
files:
revlog files: 2,104,861,230 bytes
du -b: 2,254,381,614
I would have expected storage to be smaller since we're not limiting
delta chain length and since we're using zstd instead of zlib. I
suspect the SQLite indexes and per-column overhead account for the
bulk of the differences. (Keep in mind that revlog uses a 64-byte
packed struct for revision index data and deltas are stored without
padding. Aside from the 12 unused bytes in the 32 byte node field,
revlogs are pretty efficient.) Another source of overhead is file
name storage. With revlogs, file names are stored in the filesystem.
But with SQLite, we need to store file names in the database. This is
roughly equivalent to the size of the fncache file, which for the
mozilla-unified repository is ~34MB.
Since the SQLite database isn't append-only and since delta chains
can reference any delta, this opens some interesting possibilities.
For example, we could store deltas in reverse, such that fulltexts
are stored for newer revisions and deltas are applied to reconstruct
older revisions. This is likely a more optimal storage strategy for
version control, as new data tends to be more frequently accessed
than old data. We would obviously need wire protocol support for
transferring revision data from newest to oldest. And we would
probably need some kind of mechanism for "re-encoding" stores. But
it should be doable.
This extension is very much experimental quality. There are a handful
of features that don't work. It probably isn't suitable for day-to-day
use. But it could be used in limited cases (e.g. read-only checkouts
like in CI). And it is also a good proving ground for alternate
storage backends. As we continue to define interfaces for all things
storage, it will be useful to have a viable alternate storage backend
to see how things shake out in practice.
test-storage.py passes on Python 2 and introduces no new test failures on
Python 3. Having the storage-level unit tests has proved to be insanely
useful when developing this extension. Those tests caught numerous bugs
during development and I'm convinced this style of testing is the way
forward for ensuring alternate storage backends work as intended. Of
course, test coverage isn't close to what it needs to be. But it is
a start. And what coverage we have gives me confidence that basic store
functionality is implemented properly.
Differential Revision: https://phab.mercurial-scm.org/D4928
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Tue, 09 Oct 2018 08:50:13 -0700 |
parents | 5abc47d4ca6b |
children | ef6cab7930b3 |
line wrap: on
line source
hg debuginstall $ hg debuginstall checking encoding (ascii)... checking Python executable (*) (glob) checking Python version (2.*) (glob) checking Python lib (*lib*)... (glob) checking Python security support (*) (glob) TLS 1.2 not supported by Python install; network connections lack modern security (?) SNI not supported by Python install; may have connectivity issues with some servers (?) checking Mercurial version (*) (glob) checking Mercurial custom build (*) (glob) checking module policy (*) (glob) checking installed modules (*mercurial)... (glob) checking registered compression engines (*zlib*) (glob) checking available compression engines (*zlib*) (glob) checking available compression engines for wire protocol (*zlib*) (glob) checking "re2" regexp engine \((available|missing)\) (re) checking templates (*mercurial?templates)... (glob) checking default template (*mercurial?templates?map-cmdline.default) (glob) checking commit editor... (*) (glob) checking username (test) no problems detected hg debuginstall JSON $ hg debuginstall -Tjson | sed 's|\\\\|\\|g' [ { "compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob) "compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob) "compenginesserver": [*"zlib"*], (glob) "defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob) "defaulttemplateerror": null, "defaulttemplatenotfound": "default", "editor": "*", (glob) "editornotfound": false, "encoding": "ascii", "encodingerror": null, "extensionserror": null, (no-pure !) "hgmodulepolicy": "*", (glob) "hgmodules": "*mercurial", (glob) "hgver": "*", (glob) "hgverextra": "*", (glob) "problems": 0, "pythonexe": "*", (glob) "pythonlib": "*", (glob) "pythonsecurity": [*], (glob) "pythonver": "*.*.*", (glob) "re2": (true|false), (re) "templatedirs": "*mercurial?templates", (glob) "username": "test", "usernameerror": null, "vinotfound": false } ] hg debuginstall with no username $ HGUSER= hg debuginstall checking encoding (ascii)... checking Python executable (*) (glob) checking Python version (2.*) (glob) checking Python lib (*lib*)... (glob) checking Python security support (*) (glob) TLS 1.2 not supported by Python install; network connections lack modern security (?) SNI not supported by Python install; may have connectivity issues with some servers (?) checking Mercurial version (*) (glob) checking Mercurial custom build (*) (glob) checking module policy (*) (glob) checking installed modules (*mercurial)... (glob) checking registered compression engines (*zlib*) (glob) checking available compression engines (*zlib*) (glob) checking available compression engines for wire protocol (*zlib*) (glob) checking "re2" regexp engine \((available|missing)\) (re) checking templates (*mercurial?templates)... (glob) checking default template (*mercurial?templates?map-cmdline.default) (glob) checking commit editor... (*) (glob) checking username... no username supplied (specify a username in your configuration file) 1 problems detected, please check your install! [1] hg debuginstall with invalid encoding $ HGENCODING=invalidenc hg debuginstall | grep encoding checking encoding (invalidenc)... unknown encoding: invalidenc exception message in JSON $ HGENCODING=invalidenc HGUSER= hg debuginstall -Tjson | grep error "defaulttemplateerror": null, "encodingerror": "unknown encoding: invalidenc", "extensionserror": null, (no-pure !) "usernameerror": "no username supplied", path variables are expanded (~ is the same as $TESTTMP) $ mkdir tools $ touch tools/testeditor.exe #if execbit $ chmod 755 tools/testeditor.exe #endif $ HGEDITOR="~/tools/testeditor.exe" hg debuginstall checking encoding (ascii)... checking Python executable (*) (glob) checking Python version (*) (glob) checking Python lib (*lib*)... (glob) checking Python security support (*) (glob) TLS 1.2 not supported by Python install; network connections lack modern security (?) SNI not supported by Python install; may have connectivity issues with some servers (?) checking Mercurial version (*) (glob) checking Mercurial custom build (*) (glob) checking module policy (*) (glob) checking installed modules (*mercurial)... (glob) checking registered compression engines (*zlib*) (glob) checking available compression engines (*zlib*) (glob) checking available compression engines for wire protocol (*zlib*) (glob) checking "re2" regexp engine \((available|missing)\) (re) checking templates (*mercurial?templates)... (glob) checking default template (*mercurial?templates?map-cmdline.default) (glob) checking commit editor... ($TESTTMP/tools/testeditor.exe) checking username (test) no problems detected print out the binary post-shlexsplit in the error message when commit editor is not found (this is intentionally using backslashes to mimic a windows usecase). $ HGEDITOR="c:\foo\bar\baz.exe -y -z" hg debuginstall checking encoding (ascii)... checking Python executable (*) (glob) checking Python version (*) (glob) checking Python lib (*lib*)... (glob) checking Python security support (*) (glob) TLS 1.2 not supported by Python install; network connections lack modern security (?) SNI not supported by Python install; may have connectivity issues with some servers (?) checking Mercurial version (*) (glob) checking Mercurial custom build (*) (glob) checking module policy (*) (glob) checking installed modules (*mercurial)... (glob) checking registered compression engines (*zlib*) (glob) checking available compression engines (*zlib*) (glob) checking available compression engines for wire protocol (*zlib*) (glob) checking "re2" regexp engine \((available|missing)\) (re) checking templates (*mercurial?templates)... (glob) checking default template (*mercurial?templates?map-cmdline.default) (glob) checking commit editor... (c:\foo\bar\baz.exe) (windows !) Can't find editor 'c:\foo\bar\baz.exe' in PATH (windows !) checking commit editor... (c:foobarbaz.exe) (no-windows !) Can't find editor 'c:foobarbaz.exe' in PATH (no-windows !) (specify a commit editor in your configuration file) checking username (test) 1 problems detected, please check your install! [1] #if test-repo $ . "$TESTDIR/helpers-testrepo.sh" $ cat >> wixxml.py << EOF > import os, subprocess, sys > import xml.etree.ElementTree as ET > > # MSYS mangles the path if it expands $TESTDIR > testdir = os.environ['TESTDIR'] > ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'} > > def directory(node, relpath): > '''generator of files in the xml node, rooted at relpath''' > dirs = node.findall('./{%(wix)s}Directory' % ns) > > for d in dirs: > for subfile in directory(d, relpath + d.attrib['Name'] + '/'): > yield subfile > > files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns) > > for f in files: > yield relpath + f.attrib['Name'] > > def hgdirectory(relpath): > '''generator of tracked files, rooted at relpath''' > hgdir = "%s/../mercurial" % (testdir) > args = ['hg', '--cwd', hgdir, 'files', relpath] > proc = subprocess.Popen(args, stdout=subprocess.PIPE, > stderr=subprocess.PIPE) > output = proc.communicate()[0] > > slash = '/' > for line in output.splitlines(): > if os.name == 'nt': > yield line.replace(os.sep, slash) > else: > yield line > > tracked = [f for f in hgdirectory(sys.argv[1])] > > xml = ET.parse("%s/../contrib/wix/%s.wxs" % (testdir, sys.argv[1])) > root = xml.getroot() > dir = root.find('.//{%(wix)s}DirectoryRef' % ns) > > installed = [f for f in directory(dir, '')] > > print('Not installed:') > for f in sorted(set(tracked) - set(installed)): > print(' %s' % f) > > print('Not tracked:') > for f in sorted(set(installed) - set(tracked)): > print(' %s' % f) > EOF $ ( testrepohgenv; "$PYTHON" wixxml.py help ) Not installed: help/common.txt help/hg-ssh.8.txt help/hg.1.txt help/hgignore.5.txt help/hgrc.5.txt Not tracked: $ ( testrepohgenv; "$PYTHON" wixxml.py templates ) Not installed: Not tracked: #endif #if virtualenv Verify that Mercurial is installable with pip. Note that this MUST be the last test in this file, because we do some nasty things to the shell environment in order to make the virtualenv work reliably. $ cd $TESTTMP Note: --no-site-packages is deprecated, but some places have an ancient virtualenv from their linux distro or similar and it's not yet the default for them. $ unset PYTHONPATH $ "$PYTHON" -m virtualenv --no-site-packages --never-download installenv >> pip.log Note: we use this weird path to run pip and hg to avoid platform differences, since it's bin on most platforms but Scripts on Windows. $ ./installenv/*/pip install --no-index $TESTDIR/.. >> pip.log $ ./installenv/*/hg debuginstall || cat pip.log checking encoding (ascii)... checking Python executable (*) (glob) checking Python version (2.*) (glob) checking Python lib (*)... (glob) checking Python security support (*) (glob) TLS 1.2 not supported by Python install; network connections lack modern security (?) SNI not supported by Python install; may have connectivity issues with some servers (?) checking Mercurial version (*) (glob) checking Mercurial custom build (*) (glob) checking module policy (*) (glob) checking installed modules (*/mercurial)... (glob) checking registered compression engines (*) (glob) checking available compression engines (*) (glob) checking available compression engines for wire protocol (*) (glob) checking "re2" regexp engine \((available|missing)\) (re) checking templates ($TESTTMP/installenv/*/site-packages/mercurial/templates)... (glob) checking default template ($TESTTMP/installenv/*/site-packages/mercurial/templates/map-cmdline.default) (glob) checking commit editor... (*) (glob) checking username (test) no problems detected #endif