view tests/test-rebase-cache.t @ 40326:fed697fa1734

sqlitestore: file storage backend using SQLite

This commit provides an extension which uses SQLite to store file
data (as opposed to revlogs).

As the inline documentation describes, there are still several
aspects to the extension that are incomplete. But it's a start.
The extension does support basic clone, checkout, and commit
workflows, which makes it suitable for simple use cases.

One notable missing feature is support for "bundlerepos." This is
probably responsible for the most test failures when the extension
is activated as part of the test suite.

All revision data is stored in SQLite. Data is stored as zstd
compressed chunks (default if zstd is available), zlib compressed
chunks (default if zstd is not available), or raw chunks (if
configured or if a compressed delta is not smaller than the raw
delta). This makes things very similar to revlogs.

Unlike revlogs, the extension doesn't yet enforce a limit on delta
chain length. This is an obvious limitation and should be addressed.
This is somewhat mitigated by the use of zstd, which is much faster
than zlib to decompress.

There is a dedicated table for storing deltas. Deltas are stored
by the SHA-1 hash of their uncompressed content. The "fileindex" table
has columns that reference the delta for each revision and the base
delta that delta should be applied against. A recursive SQL query
is used to resolve the delta chain along with the delta data.

By storing deltas by hash, we are able to de-duplicate delta storage!
With revlogs, the same deltas in different revlogs would result in
duplicate storage of that delta. In this scheme, inserting the
duplicate delta is a no-op and delta chains simply reference the
existing delta.

When initially implementing this extension, I did not have
content-indexed deltas and deltas could be duplicated across files
(just like revlogs). When I implemented content-indexed deltas, the
size of the SQLite database for a full clone of mozilla-unified
dropped:

before: 2,554,261,504 bytes
after:  2,488,754,176 bytes

Surprisingly, this is still larger than the bytes size of revlog
files:

revlog files: 2,104,861,230 bytes
du -b:        2,254,381,614

I would have expected storage to be smaller since we're not limiting
delta chain length and since we're using zstd instead of zlib. I
suspect the SQLite indexes and per-column overhead account for the
bulk of the differences. (Keep in mind that revlog uses a 64-byte
packed struct for revision index data and deltas are stored without
padding. Aside from the 12 unused bytes in the 32 byte node field,
revlogs are pretty efficient.) Another source of overhead is file
name storage. With revlogs, file names are stored in the filesystem.
But with SQLite, we need to store file names in the database. This is
roughly equivalent to the size of the fncache file, which for the
mozilla-unified repository is ~34MB.

Since the SQLite database isn't append-only and since delta chains
can reference any delta, this opens some interesting possibilities.
For example, we could store deltas in reverse, such that fulltexts
are stored for newer revisions and deltas are applied to reconstruct
older revisions. This is likely a more optimal storage strategy for
version control, as new data tends to be more frequently accessed
than old data. We would obviously need wire protocol support for
transferring revision data from newest to oldest. And we would
probably need some kind of mechanism for "re-encoding" stores. But
it should be doable.

This extension is very much experimental quality. There are a handful
of features that don't work. It probably isn't suitable for day-to-day
use. But it could be used in limited cases (e.g. read-only checkouts
like in CI). And it is also a good proving ground for alternate
storage backends. As we continue to define interfaces for all things
storage, it will be useful to have a viable alternate storage backend
to see how things shake out in practice.

test-storage.py passes on Python 2 and introduces no new test failures on
Python 3. Having the storage-level unit tests has proved to be insanely
useful when developing this extension. Those tests caught numerous bugs
during development and I'm convinced this style of testing is the way
forward for ensuring alternate storage backends work as intended. Of
course, test coverage isn't close to what it needs to be. But it is
a start. And what coverage we have gives me confidence that basic store
functionality is implemented properly.

Differential Revision: https://phab.mercurial-scm.org/D4928

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > mq=
  > 
  > [phases]
  > publish=False
  > 
  > [alias]
  > tglog  = log -G --template "{rev}: '{desc}' {branches}\n"
  > theads = heads --template "{rev}: '{desc}' {branches}\n"
  > EOF

  $ hg init a
  $ cd a

  $ echo a > a
  $ hg ci -Am A
  adding a

  $ hg branch branch1
  marked working directory as branch branch1
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -m 'branch1'

  $ echo b > b
  $ hg ci -Am B
  adding b

  $ hg up -q 0

  $ hg branch branch2
  marked working directory as branch branch2
  $ hg ci -m 'branch2'

  $ echo c > C
  $ hg ci -Am C
  adding C

  $ hg up -q 2

  $ hg branch -f branch2
  marked working directory as branch branch2
  $ echo d > d
  $ hg ci -Am D
  adding d
  created new head

  $ echo e > e
  $ hg ci -Am E
  adding e

  $ hg update default
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved

  $ hg branch branch3
  marked working directory as branch branch3
  $ hg ci -m 'branch3'

  $ echo f > f
  $ hg ci -Am F
  adding f

  $ cd ..


Rebase part of branch2 (5-6) onto branch3 (8):

  $ hg clone -q -u . a a1
  $ cd a1

  $ hg tglog
  @  8: 'F' branch3
  |
  o  7: 'branch3' branch3
  |
  | o  6: 'E' branch2
  | |
  | o  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  +---o  3: 'branch2' branch2
  | |
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg branches
  branch3                        8:4666b71e8e32
  branch2                        6:5097051d331d
  branch1                        2:0a03079c47fd (inactive)
  default                        0:1994f17a630e (inactive)

  $ hg theads
  8: 'F' branch3
  6: 'E' branch2
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg rebase -s 5 -d 8
  rebasing 5:635859577d0b "D"
  rebasing 6:5097051d331d "E"
  saved backup bundle to $TESTTMP/a1/.hg/strip-backup/635859577d0b-89160bff-rebase.hg

  $ hg branches
  branch3                        8:466cdfb14b62
  branch2                        4:e4fdb121d036
  branch1                        2:0a03079c47fd
  default                        0:1994f17a630e (inactive)

  $ hg theads
  8: 'E' branch3
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg tglog
  o  8: 'E' branch3
  |
  o  7: 'D' branch3
  |
  @  6: 'F' branch3
  |
  o  5: 'branch3' branch3
  |
  | o  4: 'C' branch2
  | |
  | o  3: 'branch2' branch2
  |/
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ cd ..


Rebase head of branch3 (8) onto branch2 (6):

  $ hg clone -q -u . a a2
  $ cd a2

  $ hg tglog
  @  8: 'F' branch3
  |
  o  7: 'branch3' branch3
  |
  | o  6: 'E' branch2
  | |
  | o  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  +---o  3: 'branch2' branch2
  | |
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg rebase -s 8 -d 6
  rebasing 8:4666b71e8e32 "F" (tip)
  saved backup bundle to $TESTTMP/a2/.hg/strip-backup/4666b71e8e32-fc1c4e96-rebase.hg

  $ hg branches
  branch2                        8:6b4bdc1b5ac0
  branch3                        7:653b9feb4616
  branch1                        2:0a03079c47fd (inactive)
  default                        0:1994f17a630e (inactive)

  $ hg theads
  8: 'F' branch2
  7: 'branch3' branch3
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg tglog
  @  8: 'F' branch2
  |
  | o  7: 'branch3' branch3
  | |
  o |  6: 'E' branch2
  | |
  o |  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  | | o  3: 'branch2' branch2
  | |/
  o |  2: 'B' branch1
  | |
  o |  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg verify -q

  $ cd ..


Rebase entire branch3 (7-8) onto branch2 (6):

  $ hg clone -q -u . a a3
  $ cd a3

  $ hg tglog
  @  8: 'F' branch3
  |
  o  7: 'branch3' branch3
  |
  | o  6: 'E' branch2
  | |
  | o  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  +---o  3: 'branch2' branch2
  | |
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg rebase -s 7 -d 6
  rebasing 7:653b9feb4616 "branch3"
  note: rebase of 7:653b9feb4616 created no changes to commit
  rebasing 8:4666b71e8e32 "F" (tip)
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/653b9feb4616-3c88de16-rebase.hg

  $ hg branches
  branch2                        7:6b4bdc1b5ac0
  branch1                        2:0a03079c47fd (inactive)
  default                        0:1994f17a630e (inactive)

  $ hg theads
  7: 'F' branch2
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg tglog
  @  7: 'F' branch2
  |
  o  6: 'E' branch2
  |
  o  5: 'D' branch2
  |
  | o  4: 'C' branch2
  | |
  | o  3: 'branch2' branch2
  | |
  o |  2: 'B' branch1
  | |
  o |  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg verify -q

Stripping multiple branches in one go bypasses the fast-case code to
update the branch cache.

  $ hg strip 2
  0 files updated, 0 files merged, 4 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/0a03079c47fd-11b7c407-backup.hg

  $ hg tglog
  o  3: 'C' branch2
  |
  o  2: 'branch2' branch2
  |
  | @  1: 'branch1' branch1
  |/
  o  0: 'A'
  

  $ hg branches
  branch2                        3:e4fdb121d036
  branch1                        1:63379ac49655
  default                        0:1994f17a630e (inactive)

  $ hg theads
  3: 'C' branch2
  1: 'branch1' branch1
  0: 'A' 

Fast path branchcache code should not be invoked if branches stripped is not
the same as branches remaining.

  $ hg init b
  $ cd b

  $ hg branch branch1
  marked working directory as branch branch1
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -m 'branch1'

  $ hg branch branch2
  marked working directory as branch branch2
  $ hg ci -m 'branch2'

  $ hg branch -f branch1
  marked working directory as branch branch1

  $ echo a > A
  $ hg ci -Am A
  adding A
  created new head

  $ hg tglog
  @  2: 'A' branch1
  |
  o  1: 'branch2' branch2
  |
  o  0: 'branch1' branch1
  

  $ hg theads
  2: 'A' branch1
  1: 'branch2' branch2

  $ hg strip 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/b/.hg/strip-backup/a5b4b27ed7b4-a3b6984e-backup.hg

  $ hg theads
  1: 'branch2' branch2
  0: 'branch1' branch1


Make sure requesting to strip a revision already stripped does not confuse things.
Try both orders.

  $ cd ..

  $ hg init c
  $ cd c

  $ echo a > a
  $ hg ci -Am A
  adding a
  $ echo b > b
  $ hg ci -Am B
  adding b
  $ echo c > c
  $ hg ci -Am C
  adding c
  $ echo d > d
  $ hg ci -Am D
  adding d
  $ echo e > e
  $ hg ci -Am E
  adding e

  $ hg tglog
  @  4: 'E'
  |
  o  3: 'D'
  |
  o  2: 'C'
  |
  o  1: 'B'
  |
  o  0: 'A'
  

  $ hg strip 3 4
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/c/.hg/strip-backup/67a385d4e6f2-b9243789-backup.hg

  $ hg theads
  2: 'C' 

  $ hg strip 2 1
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/c/.hg/strip-backup/6c81ed0049f8-a687065f-backup.hg

  $ hg theads
  0: 'A' 

Make sure rebase does not break for phase/filter related reason
----------------------------------------------------------------
(issue3858)

  $ cd ..

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > logtemplate={rev} {desc} {phase}\n
  > EOF


  $ hg init c4
  $ cd c4

  $ echo a > a
  $ hg ci -Am A
  adding a
  $ echo b > b
  $ hg ci -Am B
  adding b
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo c > c
  $ hg ci -Am C
  adding c
  created new head
  $ hg up 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m d
  $ hg up 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo e > e
  $ hg ci -Am E
  adding e
  created new head
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m F
  $ hg up 3
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo g > g
  $ hg ci -Am G
  adding g
  created new head
  $ echo h > h
  $ hg ci -Am H
  adding h
  $ hg up 5
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo i > i
  $ hg ci -Am I
  adding i

Turn most changeset public

  $ hg ph -p 7

  $ hg heads
  8 I draft
  7 H public
  $ hg log -G
  @  8 I draft
  |
  | o  7 H public
  | |
  | o  6 G public
  | |
  o |  5 F draft
  |\|
  o |  4 E draft
  | |
  | o  3 d public
  |/|
  o |  2 C public
  | |
  | o  1 B public
  |/
  o  0 A public
  

  $ cat > $TESTTMP/checkeditform.sh <<EOF
  > env | grep HGEDITFORM
  > true
  > EOF
  $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg rebase --dest 7 --source 5 -e
  rebasing 5:361a99976cc9 "F"
  HGEDITFORM=rebase.merge
  rebasing 8:326cfedc031c "I" (tip)
  HGEDITFORM=rebase.normal
  saved backup bundle to $TESTTMP/a3/c4/.hg/strip-backup/361a99976cc9-35e980d0-rebase.hg