view hgext/win32mbcs.py @ 25759:ff11c1565c04

cmdutil: apply dirstate.normallookup on (maybe partially) committed files To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N *** *** - change "f" N - execute 'hg commit -i' - backup "f" with timestamp N - revert "f" by 'merge.update()' N with 'partially' - apply selected hunks N by 'patch.patch()' - 'repo.commit()' - 'dirstate.normal("f")' N N+1 - 'dirstate.write()' N N - restore "f" N+1 - restore timestamp of "f" N - 'hg status' shows "f" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. This issue can occur when 'hg commit -i' satisfies conditions below: - the file is committed partially, and - mode and size of the file aren't changed before and after committing The root cause of this issue is that (maybe partially changed) files are restored with original timestamp but dirstate isn't updated for them. To detect changes of files correctly, this patch applies 'dirstate.normallookup()' on restored files. Status check is needed before 'dirstate.normallookup()', because status other than "n(ormal)" should be kept at failure of committing. This patch doesn't examine whether each files are committed fully or partially, because interactive hunk selection makes it difficult. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N *** *** - change "f" N - execute 'hg commit -i' - backup "f" with timestamp N - revert "f" by 'merge.update()' N with 'partially' - apply selected hunks N by 'patch.internalpatch()' - 'repo.commit()' - 'dirstate.normal("f")' N N+1 - 'dirstate.write()' N N - restore "f" N+1 - restore timestamp of "f" N ----------------------------------- ---- ----- ----- - normallookup("f") -1 - release wlock - 'dirstate.write()' -1 -1 N ----------------------------------- ---- ----- ----- - 'hg status' shows "f" as "clean" -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - change "f" at N 'touch -t 200001010000' before command invocation changes mtime of "f" to "2000-01-01 00:00" (= N). - apply selected hunks at N 'patch.internalpatch()' with 'fakepatchtime.py' explicitly changes mtime of patched files to "2000-01-01 00:00" (= N). - 'dirstate.write()' at N+1 (or "not at N") 'pack_dirstate()' uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, in 'test-commit-interactive.t', files are sometimes treated as modified , even though they are just committed fully via 'hg commit -i' and 'hg diff' shows nothing for them. Enabling win32text causes EOL style mismatching below: - files are changed in LF style EOL => files restored after committing uses LF style EOL (1) - 'merge.update()' reverts files in CRLF style EOL - 'patch.internalpatch()' changes files in CRLF style EOL => 'dirstate.normal()' via 'repo.commit()' uses the size of files in CRLF style EOL (2) Therefore, fully committed files are treated as "modified", because 'lstat()' returns size of (1) restored files in LF style EOL, but dirstate expects size of (2) committed files in CRLF style EOL. After this patch, 'dirstate.normallookup()' on committed files forces subsequent 'hg status' to examine changes exactly, and fully committed files are treated as clean as expected. This is reason why this patch also does: - add some 'hg status' checking status of fully committed files - clear win32text configuration before size/timestamp sensitive examination
author FUJIWARA Katsunori <foozy@lares.dti.ne.jp>
date Wed, 08 Jul 2015 17:07:45 +0900
parents 80c5b2666a96
children 56b2bcea2529
line wrap: on
line source

# win32mbcs.py -- MBCS filename support for Mercurial
#
# Copyright (c) 2008 Shun-ichi Goto <shunichi.goto@gmail.com>
#
# Version: 0.3
# Author:  Shun-ichi Goto <shunichi.goto@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
#

'''allow the use of MBCS paths with problematic encodings

Some MBCS encodings are not good for some path operations (i.e.
splitting path, case conversion, etc.) with its encoded bytes. We call
such a encoding (i.e. shift_jis and big5) as "problematic encoding".
This extension can be used to fix the issue with those encodings by
wrapping some functions to convert to Unicode string before path
operation.

This extension is useful for:

- Japanese Windows users using shift_jis encoding.
- Chinese Windows users using big5 encoding.
- All users who use a repository with one of problematic encodings on
  case-insensitive file system.

This extension is not needed for:

- Any user who use only ASCII chars in path.
- Any user who do not use any of problematic encodings.

Note that there are some limitations on using this extension:

- You should use single encoding in one repository.
- If the repository path ends with 0x5c, .hg/hgrc cannot be read.
- win32mbcs is not compatible with fixutf8 extension.

By default, win32mbcs uses encoding.encoding decided by Mercurial.
You can specify the encoding by config option::

 [win32mbcs]
 encoding = sjis

It is useful for the users who want to commit with UTF-8 log message.
'''

import os, sys
from mercurial.i18n import _
from mercurial import util, encoding
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'

_encoding = None                                # see extsetup

def decode(arg):
    if isinstance(arg, str):
        uarg = arg.decode(_encoding)
        if arg == uarg.encode(_encoding):
            return uarg
        raise UnicodeError("Not local encoding")
    elif isinstance(arg, tuple):
        return tuple(map(decode, arg))
    elif isinstance(arg, list):
        return map(decode, arg)
    elif isinstance(arg, dict):
        for k, v in arg.items():
            arg[k] = decode(v)
    return arg

def encode(arg):
    if isinstance(arg, unicode):
        return arg.encode(_encoding)
    elif isinstance(arg, tuple):
        return tuple(map(encode, arg))
    elif isinstance(arg, list):
        return map(encode, arg)
    elif isinstance(arg, dict):
        for k, v in arg.items():
            arg[k] = encode(v)
    return arg

def appendsep(s):
    # ensure the path ends with os.sep, appending it if necessary.
    try:
        us = decode(s)
    except UnicodeError:
        us = s
    if us and us[-1] not in ':/\\':
        s += os.sep
    return s


def basewrapper(func, argtype, enc, dec, args, kwds):
    # check check already converted, then call original
    for arg in args:
        if isinstance(arg, argtype):
            return func(*args, **kwds)

    try:
        # convert string arguments, call func, then convert back the
        # return value.
        return enc(func(*dec(args), **dec(kwds)))
    except UnicodeError:
        raise util.Abort(_("[win32mbcs] filename conversion failed with"
                         " %s encoding\n") % (_encoding))

def wrapper(func, args, kwds):
    return basewrapper(func, unicode, encode, decode, args, kwds)


def reversewrapper(func, args, kwds):
    return basewrapper(func, str, decode, encode, args, kwds)

def wrapperforlistdir(func, args, kwds):
    # Ensure 'path' argument ends with os.sep to avoids
    # misinterpreting last 0x5c of MBCS 2nd byte as path separator.
    if args:
        args = list(args)
        args[0] = appendsep(args[0])
    if 'path' in kwds:
        kwds['path'] = appendsep(kwds['path'])
    return func(*args, **kwds)

def wrapname(name, wrapper):
    module, name = name.rsplit('.', 1)
    module = sys.modules[module]
    func = getattr(module, name)
    def f(*args, **kwds):
        return wrapper(func, args, kwds)
    try:
        f.__name__ = func.__name__ # fails with Python 2.3
    except Exception:
        pass
    setattr(module, name, f)

# List of functions to be wrapped.
# NOTE: os.path.dirname() and os.path.basename() are safe because
#       they use result of os.path.split()
funcs = '''os.path.join os.path.split os.path.splitext
 os.path.normpath os.makedirs
 mercurial.util.endswithsep mercurial.util.splitpath mercurial.util.checkcase
 mercurial.util.fspath mercurial.util.pconvert mercurial.util.normpath
 mercurial.util.checkwinfilename mercurial.util.checkosfilename
 mercurial.util.split'''

# These functions are required to be called with local encoded string
# because they expects argument is local encoded string and cause
# problem with unicode string.
rfuncs = '''mercurial.encoding.upper mercurial.encoding.lower'''

# List of Windows specific functions to be wrapped.
winfuncs = '''os.path.splitunc'''

# codec and alias names of sjis and big5 to be faked.
problematic_encodings = '''big5 big5-tw csbig5 big5hkscs big5-hkscs
 hkscs cp932 932 ms932 mskanji ms-kanji shift_jis csshiftjis shiftjis
 sjis s_jis shift_jis_2004 shiftjis2004 sjis_2004 sjis2004
 shift_jisx0213 shiftjisx0213 sjisx0213 s_jisx0213 950 cp950 ms950 '''

def extsetup(ui):
    # TODO: decide use of config section for this extension
    if ((not os.path.supports_unicode_filenames) and
        (sys.platform != 'cygwin')):
        ui.warn(_("[win32mbcs] cannot activate on this platform.\n"))
        return
    # determine encoding for filename
    global _encoding
    _encoding = ui.config('win32mbcs', 'encoding', encoding.encoding)
    # fake is only for relevant environment.
    if _encoding.lower() in problematic_encodings.split():
        for f in funcs.split():
            wrapname(f, wrapper)
        if os.name == 'nt':
            for f in winfuncs.split():
                wrapname(f, wrapper)
        wrapname("mercurial.osutil.listdir", wrapperforlistdir)
        # wrap functions to be called with local byte string arguments
        for f in rfuncs.split():
            wrapname(f, reversewrapper)
        # Check sys.args manually instead of using ui.debug() because
        # command line options is not yet applied when
        # extensions.loadall() is called.
        if '--debug' in sys.argv:
            ui.write("[win32mbcs] activated with encoding: %s\n"
                     % _encoding)