view i18n/check-translation.py @ 25759:ff11c1565c04

cmdutil: apply dirstate.normallookup on (maybe partially) committed files To detect change of a file without redundant comparison of file content, dirstate recognizes a file as certainly clean, if: (1) it is already known as "normal", (2) dirstate entry for it has valid (= not "-1") timestamp, and (3) mode, size and timestamp of it on the filesystem are as same as ones expected in dirstate This works as expected in many cases, but doesn't in the corner case that changing a file keeps mode, size and timestamp of it on the filesystem. The timetable below shows steps in one of typical such situations: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N *** *** - change "f" N - execute 'hg commit -i' - backup "f" with timestamp N - revert "f" by 'merge.update()' N with 'partially' - apply selected hunks N by 'patch.patch()' - 'repo.commit()' - 'dirstate.normal("f")' N N+1 - 'dirstate.write()' N N - restore "f" N+1 - restore timestamp of "f" N - 'hg status' shows "f" as "clean" N N N ---- ----------------------------------- ---- ----- ----- The most important point is that 'dirstate.write()' is executed at N+1 or later. This causes writing dirstate timestamp N of "f" out successfully. If it is executed at N, 'parsers.pack_dirstate()' replaces timestamp N with "-1" before actual writing dirstate out. This issue can occur when 'hg commit -i' satisfies conditions below: - the file is committed partially, and - mode and size of the file aren't changed before and after committing The root cause of this issue is that (maybe partially changed) files are restored with original timestamp but dirstate isn't updated for them. To detect changes of files correctly, this patch applies 'dirstate.normallookup()' on restored files. Status check is needed before 'dirstate.normallookup()', because status other than "n(ormal)" should be kept at failure of committing. This patch doesn't examine whether each files are committed fully or partially, because interactive hunk selection makes it difficult. After this change, timetable is changed as below: ---- ----------------------------------- ---------------- timestamp of "f" ---------------- dirstate file- time action mem file system ---- ----------------------------------- ---- ----- ----- N *** *** - change "f" N - execute 'hg commit -i' - backup "f" with timestamp N - revert "f" by 'merge.update()' N with 'partially' - apply selected hunks N by 'patch.internalpatch()' - 'repo.commit()' - 'dirstate.normal("f")' N N+1 - 'dirstate.write()' N N - restore "f" N+1 - restore timestamp of "f" N ----------------------------------- ---- ----- ----- - normallookup("f") -1 - release wlock - 'dirstate.write()' -1 -1 N ----------------------------------- ---- ----- ----- - 'hg status' shows "f" as "clean" -1 -1 N ---- ----------------------------------- ---- ----- ----- To reproduce this issue in tests certainly, this patch emulates some timing critical actions as below: - change "f" at N 'touch -t 200001010000' before command invocation changes mtime of "f" to "2000-01-01 00:00" (= N). - apply selected hunks at N 'patch.internalpatch()' with 'fakepatchtime.py' explicitly changes mtime of patched files to "2000-01-01 00:00" (= N). - 'dirstate.write()' at N+1 (or "not at N") 'pack_dirstate()' uses actual timestamp at runtime as "now", and it should be different from the "2000-01-01 00:00" of "f". BTW, in 'test-commit-interactive.t', files are sometimes treated as modified , even though they are just committed fully via 'hg commit -i' and 'hg diff' shows nothing for them. Enabling win32text causes EOL style mismatching below: - files are changed in LF style EOL => files restored after committing uses LF style EOL (1) - 'merge.update()' reverts files in CRLF style EOL - 'patch.internalpatch()' changes files in CRLF style EOL => 'dirstate.normal()' via 'repo.commit()' uses the size of files in CRLF style EOL (2) Therefore, fully committed files are treated as "modified", because 'lstat()' returns size of (1) restored files in LF style EOL, but dirstate expects size of (2) committed files in CRLF style EOL. After this patch, 'dirstate.normallookup()' on committed files forces subsequent 'hg status' to examine changes exactly, and fully committed files are treated as clean as expected. This is reason why this patch also does: - add some 'hg status' checking status of fully committed files - clear win32text configuration before size/timestamp sensitive examination
author FUJIWARA Katsunori <foozy@lares.dti.ne.jp>
date Wed, 08 Jul 2015 17:07:45 +0900
parents 35c2ea4ca26f
children 8fb92ff63ccf
line wrap: on
line source

#!/usr/bin/env python
#
# check-translation.py - check Mercurial specific translation problems

import polib
import re

checkers = []

def levelchecker(level, msgidpat):
    def decorator(func):
        if msgidpat:
            match = re.compile(msgidpat).search
        else:
            match = lambda msgid: True
        checkers.append((func, level))
        func.match = match
        return func
    return decorator

def match(checker, pe):
    """Examine whether POEntry "pe" is target of specified checker or not
    """
    if not checker.match(pe.msgid):
        return
    # examine suppression by translator comment
    nochecker = 'no-%s-check' % checker.__name__
    for tc in pe.tcomment.split():
        if nochecker == tc:
            return
    return True

####################

def fatalchecker(msgidpat=None):
    return levelchecker('fatal', msgidpat)

@fatalchecker(r'\$\$')
def promptchoice(pe):
    """Check translation of the string given to "ui.promptchoice()"

    >>> pe = polib.POEntry(
    ...     msgid ='prompt$$missing &sep$$missing &amp$$followed by &none',
    ...     msgstr='prompt  missing &sep$$missing  amp$$followed by none&')
    >>> match(promptchoice, pe)
    True
    >>> for e in promptchoice(pe): print e
    number of choices differs between msgid and msgstr
    msgstr has invalid choice missing '&'
    msgstr has invalid '&' followed by none
    """
    idchoices = [c.rstrip(' ') for c in pe.msgid.split('$$')[1:]]
    strchoices = [c.rstrip(' ') for c in pe.msgstr.split('$$')[1:]]

    if len(idchoices) != len(strchoices):
        yield "number of choices differs between msgid and msgstr"

    indices = [(c, c.find('&')) for c in strchoices]
    if [c for c, i in indices if i == -1]:
        yield "msgstr has invalid choice missing '&'"
    if [c for c, i in indices if len(c) == i + 1]:
        yield "msgstr has invalid '&' followed by none"

####################

def warningchecker(msgidpat=None):
    return levelchecker('warning', msgidpat)

@warningchecker()
def taildoublecolons(pe):
    """Check equality of tail '::'-ness between msgid and msgstr

    >>> pe = polib.POEntry(
    ...     msgid ='ends with ::',
    ...     msgstr='ends with ::')
    >>> for e in taildoublecolons(pe): print e
    >>> pe = polib.POEntry(
    ...     msgid ='ends with ::',
    ...     msgstr='ends without double-colons')
    >>> for e in taildoublecolons(pe): print e
    tail '::'-ness differs between msgid and msgstr
    >>> pe = polib.POEntry(
    ...     msgid ='ends without double-colons',
    ...     msgstr='ends with ::')
    >>> for e in taildoublecolons(pe): print e
    tail '::'-ness differs between msgid and msgstr
    """
    if pe.msgid.endswith('::') != pe.msgstr.endswith('::'):
        yield "tail '::'-ness differs between msgid and msgstr"

@warningchecker()
def indentation(pe):
    """Check equality of initial indentation between msgid and msgstr

    This may report unexpected warning, because this doesn't aware
    the syntax of rst document and the context of msgstr.

    >>> pe = polib.POEntry(
    ...     msgid ='    indented text',
    ...     msgstr='  narrowed indentation')
    >>> for e in indentation(pe): print e
    initial indentation width differs betweeen msgid and msgstr
    """
    idindent = len(pe.msgid) - len(pe.msgid.lstrip())
    strindent = len(pe.msgstr) - len(pe.msgstr.lstrip())
    if idindent != strindent:
        yield "initial indentation width differs betweeen msgid and msgstr"

####################

def check(pofile, fatal=True, warning=False):
    targetlevel = { 'fatal': fatal, 'warning': warning }
    targetcheckers = [(checker, level)
                      for checker, level in checkers
                      if targetlevel[level]]
    if not targetcheckers:
        return []

    detected = []
    for pe in pofile.translated_entries():
        errors = []
        for checker, level in targetcheckers:
            if match(checker, pe):
                errors.extend((level, checker.__name__, error)
                              for error in checker(pe))
        if errors:
            detected.append((pe, errors))
    return detected

########################################

if __name__ == "__main__":
    import sys
    import optparse

    optparser = optparse.OptionParser("""%prog [options] pofile ...

This checks Mercurial specific translation problems in specified
'*.po' files.

Each detected problems are shown in the format below::

    filename:linenum:type(checker): problem detail .....

"type" is "fatal" or "warning". "checker" is the name of the function
detecting corresponded error.

Checking by checker "foo" on the specific msgstr can be suppressed by
the "translator comment" like below. Multiple "no-xxxx-check" should
be separated by whitespaces::

    # no-foo-check
    msgid = "....."
    msgstr = "....."
""")
    optparser.add_option("", "--warning",
                         help="show also warning level problems",
                         action="store_true")
    optparser.add_option("", "--doctest",
                         help="run doctest of this tool, instead of check",
                         action="store_true")
    (options, args) = optparser.parse_args()

    if options.doctest:
        import os
        if 'TERM' in os.environ:
            del os.environ['TERM']
        import doctest
        failures, tests = doctest.testmod()
        sys.exit(failures and 1 or 0)

    # replace polib._POFileParser to show linenum of problematic msgstr
    class ExtPOFileParser(polib._POFileParser):
        def process(self, symbol, linenum):
            super(ExtPOFileParser, self).process(symbol, linenum)
            if symbol == 'MS': # msgstr
                self.current_entry.linenum = linenum
    polib._POFileParser = ExtPOFileParser

    detected = []
    warning = options.warning
    for f in args:
        detected.extend((f, pe, errors)
                        for pe, errors in check(polib.pofile(f),
                                                warning=warning))
    if detected:
        for f, pe, errors in detected:
            for level, checker, error in errors:
                sys.stderr.write('%s:%d:%s(%s): %s\n'
                                 % (f, pe.linenum, level, checker, error))
        sys.exit(1)