Mercurial > hg
view tests/test-commit.t @ 25759:ff11c1565c04
cmdutil: apply dirstate.normallookup on (maybe partially) committed files
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- change "f" N
- execute 'hg commit -i'
- backup "f" with timestamp N
- revert "f" by 'merge.update()' N
with 'partially'
- apply selected hunks N
by 'patch.patch()'
- 'repo.commit()'
- 'dirstate.normal("f")' N
N+1
- 'dirstate.write()' N N
- restore "f" N+1
- restore timestamp of "f" N
- 'hg status' shows "f" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg commit -i' satisfies conditions below:
- the file is committed partially, and
- mode and size of the file aren't changed before and after committing
The root cause of this issue is that (maybe partially changed) files
are restored with original timestamp but dirstate isn't updated for
them.
To detect changes of files correctly, this patch applies
'dirstate.normallookup()' on restored files. Status check is needed
before 'dirstate.normallookup()', because status other than "n(ormal)"
should be kept at failure of committing.
This patch doesn't examine whether each files are committed fully or
partially, because interactive hunk selection makes it difficult.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- change "f" N
- execute 'hg commit -i'
- backup "f" with timestamp N
- revert "f" by 'merge.update()' N
with 'partially'
- apply selected hunks N
by 'patch.internalpatch()'
- 'repo.commit()'
- 'dirstate.normal("f")' N
N+1
- 'dirstate.write()' N N
- restore "f" N+1
- restore timestamp of "f" N
----------------------------------- ---- ----- -----
- normallookup("f") -1
- release wlock
- 'dirstate.write()' -1 -1 N
----------------------------------- ---- ----- -----
- 'hg status' shows "f" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'touch -t 200001010000' before command invocation changes mtime of
"f" to "2000-01-01 00:00" (= N).
- apply selected hunks at N
'patch.internalpatch()' with 'fakepatchtime.py' explicitly changes
mtime of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' at N+1 (or "not at N")
'pack_dirstate()' uses actual timestamp at runtime as "now", and
it should be different from the "2000-01-01 00:00" of "f".
BTW, in 'test-commit-interactive.t', files are sometimes treated as
modified , even though they are just committed fully via 'hg commit
-i' and 'hg diff' shows nothing for them.
Enabling win32text causes EOL style mismatching below:
- files are changed in LF style EOL
=> files restored after committing uses LF style EOL (1)
- 'merge.update()' reverts files in CRLF style EOL
- 'patch.internalpatch()' changes files in CRLF style EOL
=> 'dirstate.normal()' via 'repo.commit()' uses the size of files
in CRLF style EOL (2)
Therefore, fully committed files are treated as "modified", because
'lstat()' returns size of (1) restored files in LF style EOL, but
dirstate expects size of (2) committed files in CRLF style EOL.
After this patch, 'dirstate.normallookup()' on committed files forces
subsequent 'hg status' to examine changes exactly, and fully committed
files are treated as clean as expected.
This is reason why this patch also does:
- add some 'hg status' checking status of fully committed files
- clear win32text configuration before size/timestamp sensitive examination
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:07:45 +0900 |
parents | eb52de500d2a |
children | 4b0fc75f9403 |
line wrap: on
line source
commit date test $ hg init test $ cd test $ echo foo > foo $ hg add foo $ cat > $TESTTMP/checkeditform.sh <<EOF > env | grep HGEDITFORM > true > EOF $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg commit -m "" HGEDITFORM=commit.normal.normal abort: empty commit message [255] $ hg commit -d '0 0' -m commit-1 $ echo foo >> foo $ hg commit -d '1 4444444' -m commit-3 abort: impossible time zone offset: 4444444 [255] $ hg commit -d '1 15.1' -m commit-4 abort: invalid date: '1\t15.1' [255] $ hg commit -d 'foo bar' -m commit-5 abort: invalid date: 'foo bar' [255] $ hg commit -d ' 1 4444' -m commit-6 $ hg commit -d '111111111111 0' -m commit-7 abort: date exceeds 32 bits: 111111111111 [255] $ hg commit -d '-7654321 3600' -m commit-7 abort: negative date value: -7654321 [255] commit added file that has been deleted $ echo bar > bar $ hg add bar $ rm bar $ hg commit -m commit-8 nothing changed (1 missing files, see 'hg status') [1] $ hg commit -m commit-8-2 bar abort: bar: file not found! [255] $ hg -q revert -a --no-backup $ mkdir dir $ echo boo > dir/file $ hg add adding dir/file (glob) $ hg -v commit -m commit-9 dir committing files: dir/file committing manifest committing changelog committed changeset 2:d2a76177cb42 $ echo > dir.file $ hg add adding dir.file $ hg commit -m commit-10 dir dir.file abort: dir: no match under directory! [255] $ echo >> dir/file $ mkdir bleh $ mkdir dir2 $ cd bleh $ hg commit -m commit-11 . abort: bleh: no match under directory! [255] $ hg commit -m commit-12 ../dir ../dir2 abort: dir2: no match under directory! [255] $ hg -v commit -m commit-13 ../dir committing files: dir/file committing manifest committing changelog committed changeset 3:1cd62a2d8db5 $ cd .. $ hg commit -m commit-14 does-not-exist abort: does-not-exist: * (glob) [255] #if symlink $ ln -s foo baz $ hg commit -m commit-15 baz abort: baz: file not tracked! [255] #endif $ touch quux $ hg commit -m commit-16 quux abort: quux: file not tracked! [255] $ echo >> dir/file $ hg -v commit -m commit-17 dir/file committing files: dir/file committing manifest committing changelog committed changeset 4:49176991390e An empty date was interpreted as epoch origin $ echo foo >> foo $ hg commit -d '' -m commit-no-date $ hg tip --template '{date|isodate}\n' | grep '1970' [1] Make sure we do not obscure unknown requires file entries (issue2649) $ echo foo >> foo $ echo fake >> .hg/requires $ hg commit -m bla abort: repository requires features unknown to this Mercurial: fake! (see http://mercurial.selenic.com/wiki/MissingRequirement for more information) [255] $ cd .. partial subdir commit test $ hg init test2 $ cd test2 $ mkdir foo $ echo foo > foo/foo $ mkdir bar $ echo bar > bar/bar $ hg add adding bar/bar (glob) adding foo/foo (glob) $ HGEDITOR=cat hg ci -e -m commit-subdir-1 foo commit-subdir-1 HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: added foo/foo $ hg ci -m commit-subdir-2 bar subdir log 1 $ hg log -v foo changeset: 0:f97e73a25882 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/foo description: commit-subdir-1 subdir log 2 $ hg log -v bar changeset: 1:aa809156d50d tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bar/bar description: commit-subdir-2 full log $ hg log -v changeset: 1:aa809156d50d tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: bar/bar description: commit-subdir-2 changeset: 0:f97e73a25882 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/foo description: commit-subdir-1 $ cd .. dot and subdir commit test $ hg init test3 $ echo commit-foo-subdir > commit-log-test $ cd test3 $ mkdir foo $ echo foo content > foo/plain-file $ hg add foo/plain-file $ HGEDITOR=cat hg ci --edit -l ../commit-log-test foo commit-foo-subdir HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: added foo/plain-file $ echo modified foo content > foo/plain-file $ hg ci -m commit-foo-dot . full log $ hg log -v changeset: 1:95b38e3a5b2e tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/plain-file description: commit-foo-dot changeset: 0:65d4e9386227 user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo/plain-file description: commit-foo-subdir subdir log $ cd foo $ hg log . changeset: 1:95b38e3a5b2e tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: commit-foo-dot changeset: 0:65d4e9386227 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: commit-foo-subdir $ cd .. $ cd .. Issue1049: Hg permits partial commit of merge without warning $ hg init issue1049 $ cd issue1049 $ echo a > a $ hg ci -Ama adding a $ echo a >> a $ hg ci -mb $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b >> a $ hg ci -mc created new head $ HGMERGE=true hg merge merging a 0 files updated, 1 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) should fail because we are specifying a file name $ hg ci -mmerge a abort: cannot partially commit a merge (do not specify files or patterns) [255] should fail because we are specifying a pattern $ hg ci -mmerge -I a abort: cannot partially commit a merge (do not specify files or patterns) [255] should succeed $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg ci -mmerge --edit HGEDITFORM=commit.normal.merge $ cd .. test commit message content $ hg init commitmsg $ cd commitmsg $ echo changed > changed $ echo removed > removed $ hg book activebookmark $ hg ci -qAm init $ hg rm removed $ echo changed >> changed $ echo added > added $ hg add added $ HGEDITOR=cat hg ci -A HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: bookmark 'activebookmark' HG: added added HG: changed changed HG: removed removed abort: empty commit message [255] test saving last-message.txt $ hg init sub $ echo a > sub/a $ hg -R sub add sub/a $ cat > sub/.hg/hgrc <<EOF > [hooks] > precommit.test-saving-last-message = false > EOF $ echo 'sub = sub' > .hgsub $ hg add .hgsub $ cat > $TESTTMP/editor.sh <<EOF > echo "==== before editing:" > cat \$1 > echo "====" > echo "test saving last-message.txt" >> \$1 > EOF $ rm -f .hg/last-message.txt $ HGEDITOR="sh $TESTTMP/editor.sh" hg commit -S -q ==== before editing: HG: Enter commit message. Lines beginning with 'HG:' are removed. HG: Leave message empty to abort commit. HG: -- HG: user: test HG: branch 'default' HG: bookmark 'activebookmark' HG: subrepo sub HG: added .hgsub HG: added added HG: changed .hgsubstate HG: changed changed HG: removed removed ==== abort: precommit.test-saving-last-message hook exited with status 1 (in subrepo sub) [255] $ cat .hg/last-message.txt test saving last-message.txt test that '[committemplate] changeset' definition and commit log specific template keywords work well $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset.commit.normal = HG: this is "commit.normal" template > HG: {extramsg} > {if(activebookmark, > "HG: bookmark '{activebookmark}' is activated\n", > "HG: no bookmark is activated\n")}{subrepos % > "HG: subrepo '{subrepo}' is changed\n"} > > changeset.commit = HG: this is "commit" template > HG: {extramsg} > {if(activebookmark, > "HG: bookmark '{activebookmark}' is activated\n", > "HG: no bookmark is activated\n")}{subrepos % > "HG: subrepo '{subrepo}' is changed\n"} > > changeset = HG: this is customized commit template > HG: {extramsg} > {if(activebookmark, > "HG: bookmark '{activebookmark}' is activated\n", > "HG: no bookmark is activated\n")}{subrepos % > "HG: subrepo '{subrepo}' is changed\n"} > EOF $ hg init sub2 $ echo a > sub2/a $ hg -R sub2 add sub2/a $ echo 'sub2 = sub2' >> .hgsub $ HGEDITOR=cat hg commit -S -q HG: this is "commit.normal" template HG: Leave message empty to abort commit. HG: bookmark 'activebookmark' is activated HG: subrepo 'sub' is changed HG: subrepo 'sub2' is changed abort: empty commit message [255] $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset.commit.normal = > # now, "changeset.commit" should be chosen for "hg commit" > EOF $ hg bookmark --inactive activebookmark $ hg forget .hgsub $ HGEDITOR=cat hg commit -q HG: this is "commit" template HG: Leave message empty to abort commit. HG: no bookmark is activated abort: empty commit message [255] $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset.commit = > # now, "changeset" should be chosen for "hg commit" > EOF $ HGEDITOR=cat hg commit -q HG: this is customized commit template HG: Leave message empty to abort commit. HG: no bookmark is activated abort: empty commit message [255] $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset = {desc} > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff()) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files}\n > EOF $ hg status -amr M changed A added R removed $ HGEDITOR=cat hg commit -q -e -m "foo bar" changed foo bar HG: mods=changed HG: adds= HG: dels= HG: files=changed HG: HG: --- a/changed Thu Jan 01 00:00:00 1970 +0000 HG: +++ b/changed Thu Jan 01 00:00:00 1970 +0000 HG: @@ -1,1 +1,2 @@ HG: changed HG: +changed HG: HG: mods=changed HG: adds= HG: dels= HG: files=changed $ hg status -amr A added R removed $ hg parents --template "M {file_mods}\nA {file_adds}\nR {file_dels}\n" M changed A R $ hg rollback -q $ cat >> .hg/hgrc <<EOF > [committemplate] > changeset = {desc} > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff("changed")) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff("added")) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files} > HG: > {splitlines(diff("removed")) % 'HG: {line}\n' > }HG: > HG: mods={file_mods} > HG: adds={file_adds} > HG: dels={file_dels} > HG: files={files}\n > EOF $ HGEDITOR=cat hg commit -q -e -m "foo bar" added removed foo bar HG: mods= HG: adds=added HG: dels=removed HG: files=added removed HG: HG: HG: mods= HG: adds=added HG: dels=removed HG: files=added removed HG: HG: --- /dev/null Thu Jan 01 00:00:00 1970 +0000 HG: +++ b/added Thu Jan 01 00:00:00 1970 +0000 HG: @@ -0,0 +1,1 @@ HG: +added HG: HG: mods= HG: adds=added HG: dels=removed HG: files=added removed HG: HG: --- a/removed Thu Jan 01 00:00:00 1970 +0000 HG: +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 HG: @@ -1,1 +0,0 @@ HG: -removed HG: HG: mods= HG: adds=added HG: dels=removed HG: files=added removed $ hg status -amr M changed $ hg parents --template "M {file_mods}\nA {file_adds}\nR {file_dels}\n" M A added R removed $ hg rollback -q $ cat >> .hg/hgrc <<EOF > # disable customizing for subsequent tests > [committemplate] > changeset = > EOF $ cd .. commit copy $ hg init dir2 $ cd dir2 $ echo bleh > bar $ hg add bar $ hg ci -m 'add bar' $ hg cp bar foo $ echo >> bar $ hg ci -m 'cp bar foo; change bar' $ hg debugrename foo foo renamed from bar:26d3ca0dfd18e44d796b564e38dd173c9668d3a9 $ hg debugindex bar rev offset length ..... linkrev nodeid p1 p2 (re) 0 0 6 ..... 0 26d3ca0dfd18 000000000000 000000000000 (re) 1 6 7 ..... 1 d267bddd54f7 26d3ca0dfd18 000000000000 (re) Test making empty commits $ hg commit --config ui.allowemptycommit=True -m "empty commit" $ hg log -r . -v --stat changeset: 2:d809f3644287 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 description: empty commit verify pathauditor blocks evil filepaths $ cat > evil-commit.py <<EOF > from mercurial import ui, hg, context, node > notrc = u".h\u200cg".encode('utf-8') + '/hgrc' > u = ui.ui() > r = hg.repository(u, '.') > def filectxfn(repo, memctx, path): > return context.memfilectx(repo, path, '[hooks]\nupdate = echo owned') > c = context.memctx(r, [r['tip'].node(), node.nullid], > 'evil', [notrc], filectxfn, 0) > r.commitctx(c) > EOF $ $PYTHON evil-commit.py #if windows $ hg co --clean tip abort: path contains illegal component: .h\xe2\x80\x8cg\\hgrc (esc) [255] #else $ hg co --clean tip abort: path contains illegal component: .h\xe2\x80\x8cg/hgrc (esc) [255] #endif $ hg rollback -f repository tip rolled back to revision 2 (undo commit) $ cat > evil-commit.py <<EOF > from mercurial import ui, hg, context, node > notrc = "HG~1/hgrc" > u = ui.ui() > r = hg.repository(u, '.') > def filectxfn(repo, memctx, path): > return context.memfilectx(repo, path, '[hooks]\nupdate = echo owned') > c = context.memctx(r, [r['tip'].node(), node.nullid], > 'evil', [notrc], filectxfn, 0) > r.commitctx(c) > EOF $ $PYTHON evil-commit.py $ hg co --clean tip abort: path contains illegal component: HG~1/hgrc (glob) [255] $ hg rollback -f repository tip rolled back to revision 2 (undo commit) $ cat > evil-commit.py <<EOF > from mercurial import ui, hg, context, node > notrc = "HG8B6C~2/hgrc" > u = ui.ui() > r = hg.repository(u, '.') > def filectxfn(repo, memctx, path): > return context.memfilectx(repo, path, '[hooks]\nupdate = echo owned') > c = context.memctx(r, [r['tip'].node(), node.nullid], > 'evil', [notrc], filectxfn, 0) > r.commitctx(c) > EOF $ $PYTHON evil-commit.py $ hg co --clean tip abort: path contains illegal component: HG8B6C~2/hgrc (glob) [255]