Mercurial > hg
view tests/test-empty-group.t @ 25759:ff11c1565c04
cmdutil: apply dirstate.normallookup on (maybe partially) committed files
To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:
(1) it is already known as "normal",
(2) dirstate entry for it has valid (= not "-1") timestamp, and
(3) mode, size and timestamp of it on the filesystem are as same as
ones expected in dirstate
This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.
The timetable below shows steps in one of typical such situations:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- change "f" N
- execute 'hg commit -i'
- backup "f" with timestamp N
- revert "f" by 'merge.update()' N
with 'partially'
- apply selected hunks N
by 'patch.patch()'
- 'repo.commit()'
- 'dirstate.normal("f")' N
N+1
- 'dirstate.write()' N N
- restore "f" N+1
- restore timestamp of "f" N
- 'hg status' shows "f" as "clean" N N N
---- ----------------------------------- ---- ----- -----
The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.
This issue can occur when 'hg commit -i' satisfies conditions below:
- the file is committed partially, and
- mode and size of the file aren't changed before and after committing
The root cause of this issue is that (maybe partially changed) files
are restored with original timestamp but dirstate isn't updated for
them.
To detect changes of files correctly, this patch applies
'dirstate.normallookup()' on restored files. Status check is needed
before 'dirstate.normallookup()', because status other than "n(ormal)"
should be kept at failure of committing.
This patch doesn't examine whether each files are committed fully or
partially, because interactive hunk selection makes it difficult.
After this change, timetable is changed as below:
---- ----------------------------------- ----------------
timestamp of "f"
----------------
dirstate file-
time action mem file system
---- ----------------------------------- ---- ----- -----
N *** ***
- change "f" N
- execute 'hg commit -i'
- backup "f" with timestamp N
- revert "f" by 'merge.update()' N
with 'partially'
- apply selected hunks N
by 'patch.internalpatch()'
- 'repo.commit()'
- 'dirstate.normal("f")' N
N+1
- 'dirstate.write()' N N
- restore "f" N+1
- restore timestamp of "f" N
----------------------------------- ---- ----- -----
- normallookup("f") -1
- release wlock
- 'dirstate.write()' -1 -1 N
----------------------------------- ---- ----- -----
- 'hg status' shows "f" as "clean" -1 -1 N
---- ----------------------------------- ---- ----- -----
To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:
- change "f" at N
'touch -t 200001010000' before command invocation changes mtime of
"f" to "2000-01-01 00:00" (= N).
- apply selected hunks at N
'patch.internalpatch()' with 'fakepatchtime.py' explicitly changes
mtime of patched files to "2000-01-01 00:00" (= N).
- 'dirstate.write()' at N+1 (or "not at N")
'pack_dirstate()' uses actual timestamp at runtime as "now", and
it should be different from the "2000-01-01 00:00" of "f".
BTW, in 'test-commit-interactive.t', files are sometimes treated as
modified , even though they are just committed fully via 'hg commit
-i' and 'hg diff' shows nothing for them.
Enabling win32text causes EOL style mismatching below:
- files are changed in LF style EOL
=> files restored after committing uses LF style EOL (1)
- 'merge.update()' reverts files in CRLF style EOL
- 'patch.internalpatch()' changes files in CRLF style EOL
=> 'dirstate.normal()' via 'repo.commit()' uses the size of files
in CRLF style EOL (2)
Therefore, fully committed files are treated as "modified", because
'lstat()' returns size of (1) restored files in LF style EOL, but
dirstate expects size of (2) committed files in CRLF style EOL.
After this patch, 'dirstate.normallookup()' on committed files forces
subsequent 'hg status' to examine changes exactly, and fully committed
files are treated as clean as expected.
This is reason why this patch also does:
- add some 'hg status' checking status of fully committed files
- clear win32text configuration before size/timestamp sensitive examination
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 08 Jul 2015 17:07:45 +0900 |
parents | 301725c3df9a |
children | eb586ed5d8ce |
line wrap: on
line source
# A B # # 3 4 3 # |\/| |\ # |/\| | \ # 1 2 1 2 # \ / \ / # 0 0 # # if the result of the merge of 1 and 2 # is the same in 3 and 4, no new manifest # will be created and the manifest group # will be empty during the pull # # (plus we test a failure where outgoing # wrongly reported the number of csets) $ hg init a $ cd a $ touch init $ hg ci -A -m 0 adding init $ touch x y $ hg ci -A -m 1 adding x adding y $ hg update 0 0 files updated, 0 files merged, 2 files removed, 0 files unresolved $ touch x y $ hg ci -A -m 2 adding x adding y created new head $ hg merge 1 0 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -A -m m1 $ hg update -C 1 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg merge 2 0 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -A -m m2 created new head $ cd .. $ hg clone -r 3 a b adding changesets adding manifests adding file changes added 4 changesets with 3 changes to 3 files updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg clone -r 4 a c adding changesets adding manifests adding file changes added 4 changesets with 3 changes to 3 files updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg -R a outgoing b comparing with b searching for changes changeset: 4:1ec3c74fc0e0 tag: tip parent: 1:79f9e10cd04e parent: 2:8e1bb01c1a24 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: m2 $ hg -R a outgoing c comparing with c searching for changes changeset: 3:d15a0c284984 parent: 2:8e1bb01c1a24 parent: 1:79f9e10cd04e user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: m1 $ hg -R b outgoing c comparing with c searching for changes changeset: 3:d15a0c284984 tag: tip parent: 2:8e1bb01c1a24 parent: 1:79f9e10cd04e user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: m1 $ hg -R c outgoing b comparing with b searching for changes changeset: 3:1ec3c74fc0e0 tag: tip parent: 1:79f9e10cd04e parent: 2:8e1bb01c1a24 user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: m2 $ hg -R b pull a pulling from a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 0 changes to 0 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) $ hg -R c pull a pulling from a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 0 changes to 0 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge)