view tests/test-merge1.t @ 25759:ff11c1565c04

cmdutil: apply dirstate.normallookup on (maybe partially) committed files

To detect change of a file without redundant comparison of file
content, dirstate recognizes a file as certainly clean, if:

  (1) it is already known as "normal",
  (2) dirstate entry for it has valid (= not "-1") timestamp, and
  (3) mode, size and timestamp of it on the filesystem are as same as
      ones expected in dirstate

This works as expected in many cases, but doesn't in the corner case
that changing a file keeps mode, size and timestamp of it on the
filesystem.

The timetable below shows steps in one of typical such situations:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - change "f"                                     N

       - execute 'hg commit -i'
         - backup "f" with timestamp N
         - revert "f" by 'merge.update()'               N
           with 'partially'
         - apply selected hunks                         N
           by 'patch.patch()'

         - 'repo.commit()'
           - 'dirstate.normal("f")'         N
  N+1
           - 'dirstate.write()'             N    N

         - restore "f"                                  N+1
         - restore timestamp of "f"                     N

       - 'hg status' shows "f" as "clean"   N    N      N
  ---- ----------------------------------- ---- ----- -----

The most important point is that 'dirstate.write()' is executed at N+1
or later. This causes writing dirstate timestamp N of "f" out
successfully. If it is executed at N, 'parsers.pack_dirstate()'
replaces timestamp N with "-1" before actual writing dirstate out.

This issue can occur when 'hg commit -i' satisfies conditions below:

  - the file is committed partially, and
  - mode and size of the file aren't changed before and after committing

The root cause of this issue is that (maybe partially changed) files
are restored with original timestamp but dirstate isn't updated for
them.

To detect changes of files correctly, this patch applies
'dirstate.normallookup()' on restored files. Status check is needed
before 'dirstate.normallookup()', because status other than "n(ormal)"
should be kept at failure of committing.

This patch doesn't examine whether each files are committed fully or
partially, because interactive hunk selection makes it difficult.

After this change, timetable is changed as below:

  ---- ----------------------------------- ----------------
                                           timestamp of "f"
                                           ----------------
                                           dirstate   file-
  time          action                     mem  file  system
  ---- ----------------------------------- ---- ----- -----
  N                                              ***   ***
       - change "f"                                     N

       - execute 'hg commit -i'
         - backup "f" with timestamp N
         - revert "f" by 'merge.update()'               N
           with 'partially'
         - apply selected hunks                         N
           by 'patch.internalpatch()'

         - 'repo.commit()'
           - 'dirstate.normal("f")'         N
  N+1
           - 'dirstate.write()'             N    N

         - restore "f"                                  N+1
         - restore timestamp of "f"                     N
       ----------------------------------- ---- ----- -----
         - normallookup("f")                -1
         - release wlock
           - 'dirstate.write()'             -1   -1     N
       ----------------------------------- ---- ----- -----

       - 'hg status' shows "f" as "clean"   -1   -1     N
  ---- ----------------------------------- ---- ----- -----

To reproduce this issue in tests certainly, this patch emulates some
timing critical actions as below:

  - change "f" at N

    'touch -t 200001010000' before command invocation changes mtime of
    "f" to "2000-01-01 00:00" (= N).

  - apply selected hunks at N

    'patch.internalpatch()' with 'fakepatchtime.py' explicitly changes
    mtime of patched files to "2000-01-01 00:00" (= N).

  - 'dirstate.write()' at N+1 (or "not at N")

    'pack_dirstate()' uses actual timestamp at runtime as "now", and
    it should be different from the "2000-01-01 00:00" of "f".

BTW, in 'test-commit-interactive.t', files are sometimes treated as
modified , even though they are just committed fully via 'hg commit
-i' and 'hg diff' shows nothing for them.

Enabling win32text causes EOL style mismatching below:

  - files are changed in LF style EOL

    => files restored after committing uses LF style EOL (1)

  - 'merge.update()' reverts files in CRLF style EOL
  - 'patch.internalpatch()' changes files in CRLF style EOL

    => 'dirstate.normal()' via 'repo.commit()' uses the size of files
       in CRLF style EOL (2)

Therefore, fully committed files are treated as "modified", because
'lstat()' returns size of (1) restored files in LF style EOL, but
dirstate expects size of (2) committed files in CRLF style EOL.

After this patch, 'dirstate.normallookup()' on committed files forces
subsequent 'hg status' to examine changes exactly, and fully committed
files are treated as clean as expected.

This is reason why this patch also does:

  - add some 'hg status' checking status of fully committed files
  - clear win32text configuration before size/timestamp sensitive examination

  $ cat <<EOF > merge
  > import sys, os
  > 
  > try:
  >     import msvcrt
  >     msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
  >     msvcrt.setmode(sys.stderr.fileno(), os.O_BINARY)
  > except ImportError:
  >     pass
  > 
  > print "merging for", os.path.basename(sys.argv[1])
  > EOF
  $ HGMERGE="python ../merge"; export HGMERGE

  $ hg init t
  $ cd t
  $ echo This is file a1 > a
  $ hg add a
  $ hg commit -m "commit #0"
  $ echo This is file b1 > b
  $ hg add b
  $ hg commit -m "commit #1"

  $ hg update 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test interrupted updates by exploiting our non-handling of directory collisions

  $ mkdir b
  $ hg up
  abort: *: '$TESTTMP/t/b' (glob)
  [255]
  $ hg ci
  abort: last update was interrupted
  (use 'hg update' to get a consistent checkout)
  [255]
  $ hg sum
  parent: 0:538afb845929 
   commit #0
  branch: default
  commit: (interrupted update)
  update: 1 new changesets (update)
  phases: 2 draft
  $ rmdir b
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg sum
  parent: 1:b8bb4a988f25 tip
   commit #1
  branch: default
  commit: (clean)
  update: (current)
  phases: 2 draft

Prepare a basic merge

  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo This is file c1 > c
  $ hg add c
  $ hg commit -m "commit #2"
  created new head
  $ echo This is file b1 > b
no merges expected
  $ hg merge -P 1
  changeset:   1:b8bb4a988f25
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     commit #1
  
  $ hg merge 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg diff --nodates
  diff -r 49035e18a8e6 b
  --- /dev/null
  +++ b/b
  @@ -0,0 +1,1 @@
  +This is file b1
  $ hg status
  M b
  $ cd ..; rm -r t

  $ hg init t
  $ cd t
  $ echo This is file a1 > a
  $ hg add a
  $ hg commit -m "commit #0"
  $ echo This is file b1 > b
  $ hg add b
  $ hg commit -m "commit #1"

  $ hg update 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo This is file c1 > c
  $ hg add c
  $ hg commit -m "commit #2"
  created new head
  $ echo This is file b2 > b
merge should fail
  $ hg merge 1
  b: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
merge of b expected
  $ hg merge -f 1
  merging b
  merging for b
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg diff --nodates
  diff -r 49035e18a8e6 b
  --- /dev/null
  +++ b/b
  @@ -0,0 +1,1 @@
  +This is file b2
  $ hg status
  M b
  $ cd ..; rm -r t

  $ hg init t
  $ cd t
  $ echo This is file a1 > a
  $ hg add a
  $ hg commit -m "commit #0"
  $ echo This is file b1 > b
  $ hg add b
  $ hg commit -m "commit #1"
  $ echo This is file b22 > b
  $ hg commit -m "commit #2"
  $ hg update 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo This is file c1 > c
  $ hg add c
  $ hg commit -m "commit #3"
  created new head

Contents of b should be "this is file b1"
  $ cat b
  This is file b1

  $ echo This is file b22 > b
merge fails
  $ hg merge 2
  abort: uncommitted changes
  (use 'hg status' to list changes)
  [255]
merge expected!
  $ hg merge -f 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg diff --nodates
  diff -r 85de557015a8 b
  --- a/b
  +++ b/b
  @@ -1,1 +1,1 @@
  -This is file b1
  +This is file b22
  $ hg status
  M b
  $ cd ..; rm -r t

  $ hg init t
  $ cd t
  $ echo This is file a1 > a
  $ hg add a
  $ hg commit -m "commit #0"
  $ echo This is file b1 > b
  $ hg add b
  $ hg commit -m "commit #1"
  $ echo This is file b22 > b
  $ hg commit -m "commit #2"
  $ hg update 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo This is file c1 > c
  $ hg add c
  $ hg commit -m "commit #3"
  created new head
  $ echo This is file b33 > b
merge of b should fail
  $ hg merge 2
  abort: uncommitted changes
  (use 'hg status' to list changes)
  [255]
merge of b expected
  $ hg merge -f 2
  merging b
  merging for b
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg diff --nodates
  diff -r 85de557015a8 b
  --- a/b
  +++ b/b
  @@ -1,1 +1,1 @@
  -This is file b1
  +This is file b33
  $ hg status
  M b

Test for issue2364

  $ hg up -qC .
  $ hg rm b
  $ hg ci -md
  $ hg revert -r -2 b
  $ hg up -q -- -2

Test that updated files are treated as "modified", when
'merge.update()' is aborted before 'merge.recordupdates()' (= parents
aren't changed), even if none of mode, size and timestamp of them
isn't changed on the filesystem (see also issue4583).

  $ cat > $TESTTMP/abort.py <<EOF
  > # emulate aborting before "recordupdates()". in this case, files
  > # are changed without updating dirstate
  > from mercurial import extensions, merge, util
  > def applyupdates(orig, *args, **kwargs):
  >     orig(*args, **kwargs)
  >     raise util.Abort('intentional aborting')
  > def extsetup(ui):
  >     extensions.wrapfunction(merge, "applyupdates", applyupdates)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [fakedirstatewritetime]
  > # emulate invoking dirstate.write() via repo.status()
  > # at 2000-01-01 00:00
  > fakenow = 200001010000
  > EOF

(file gotten from other revision)

  $ hg update -q -C 2
  $ echo 'THIS IS FILE B5' > b
  $ hg commit -m 'commit #5'

  $ hg update -q -C 3
  $ cat b
  This is file b1
  $ touch -t 200001010000 b
  $ hg debugrebuildstate

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
  > abort = $TESTTMP/abort.py
  > EOF
  $ hg merge 5
  abort: intentional aborting
  [255]
  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > fakedirstatewritetime = !
  > abort = !
  > EOF

  $ cat b
  THIS IS FILE B5
  $ touch -t 200001010000 b
  $ hg status -A b
  M b

(file merged from other revision)

  $ hg update -q -C 3
  $ echo 'this is file b6' > b
  $ hg commit -m 'commit #6'
  created new head

  $ cat b
  this is file b6
  $ touch -t 200001010000 b
  $ hg debugrebuildstate

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > fakedirstatewritetime = $TESTDIR/fakedirstatewritetime.py
  > abort = $TESTTMP/abort.py
  > EOF
  $ hg merge --tool internal:other 5
  abort: intentional aborting
  [255]
  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > fakedirstatewritetime = !
  > abort = !
  > EOF

  $ cat b
  THIS IS FILE B5
  $ touch -t 200001010000 b
  $ hg status -A b
  M b

  $ cd ..