streamclone: teach canperformstreamclone to be bundle2 aware
We add an argument to canperformstreamclone() to return False if a
bundle2 stream clone is available. This will enable the legacy stream
clone step to no-op when a bundle2 stream clone is supported.
The commented code will be made active when bundle2 supports streaming
clone.
This patch does foreshadow the introduction of the "stream" bundle2
capability and its "v1" sub-capability. The bundle2 capability mirrors
the existing "stream" capability and is needed so clients know whether a
server explicitly supports streaming clones over bundle2 (servers up to
this point support bundle2 without streaming clone support).
The sub-capability will denote which data formats and variations are
supported. Currently, the value "v1" denotes the existing streaming
clone data format, which I intend to reuse inside a bundle2 part. My
intent is to eventually introduce alternate data formats that can be
produced and consumed more efficiently. Having a sub-capability means
we don't need to introduce a new top-level bundle2 capability when new
formats are introduced. This doesn't really have any implications
beyond making the capabilities namespace more organized.
# streamclone.py - producing and consuming streaming repository data
#
# Copyright 2015 Gregory Szorc <gregory.szorc@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import time
from .i18n import _
from . import (
branchmap,
error,
store,
util,
)
def canperformstreamclone(pullop, bailifbundle2supported=False):
"""Whether it is possible to perform a streaming clone as part of pull.
``bailifbundle2supported`` will cause the function to return False if
bundle2 stream clones are supported. It should only be called by the
legacy stream clone code path.
Returns a tuple of (supported, requirements). ``supported`` is True if
streaming clone is supported and False otherwise. ``requirements`` is
a set of repo requirements from the remote, or ``None`` if stream clone
isn't supported.
"""
repo = pullop.repo
remote = pullop.remote
bundle2supported = False
if pullop.canusebundle2:
if 'v1' in pullop.remotebundle2caps.get('stream', []):
bundle2supported = True
# else
# Server doesn't support bundle2 stream clone or doesn't support
# the versions we support. Fall back and possibly allow legacy.
# Ensures legacy code path uses available bundle2.
if bailifbundle2supported and bundle2supported:
return False, None
# Ensures bundle2 doesn't try to do a stream clone if it isn't supported.
#elif not bailifbundle2supported and not bundle2supported:
# return False, None
# Streaming clone only works on empty repositories.
if len(repo):
return False, None
# Streaming clone only works if all data is being requested.
if pullop.heads:
return False, None
streamrequested = pullop.streamclonerequested
# If we don't have a preference, let the server decide for us. This
# likely only comes into play in LANs.
if streamrequested is None:
# The server can advertise whether to prefer streaming clone.
streamrequested = remote.capable('stream-preferred')
if not streamrequested:
return False, None
# In order for stream clone to work, the client has to support all the
# requirements advertised by the server.
#
# The server advertises its requirements via the "stream" and "streamreqs"
# capability. "stream" (a value-less capability) is advertised if and only
# if the only requirement is "revlogv1." Else, the "streamreqs" capability
# is advertised and contains a comma-delimited list of requirements.
requirements = set()
if remote.capable('stream'):
requirements.add('revlogv1')
else:
streamreqs = remote.capable('streamreqs')
# This is weird and shouldn't happen with modern servers.
if not streamreqs:
return False, None
streamreqs = set(streamreqs.split(','))
# Server requires something we don't support. Bail.
if streamreqs - repo.supportedformats:
return False, None
requirements = streamreqs
return True, requirements
def maybeperformlegacystreamclone(pullop):
"""Possibly perform a legacy stream clone operation.
Legacy stream clones are performed as part of pull but before all other
operations.
A legacy stream clone will not be performed if a bundle2 stream clone is
supported.
"""
supported, requirements = canperformstreamclone(pullop)
if not supported:
return
repo = pullop.repo
remote = pullop.remote
# Save remote branchmap. We will use it later to speed up branchcache
# creation.
rbranchmap = None
if remote.capable('branchmap'):
rbranchmap = remote.branchmap()
fp = remote.stream_out()
l = fp.readline()
try:
resp = int(l)
except ValueError:
raise error.ResponseError(
_('unexpected response from remote server:'), l)
if resp == 1:
raise util.Abort(_('operation forbidden by server'))
elif resp == 2:
raise util.Abort(_('locking the remote repository failed'))
elif resp != 0:
raise util.Abort(_('the server sent an unknown error code'))
lock = repo.lock()
try:
consumev1(repo, fp)
# new requirements = old non-format requirements +
# new format-related remote requirements
# requirements from the streamed-in repository
repo.requirements = requirements | (
repo.requirements - repo.supportedformats)
repo._applyopenerreqs()
repo._writerequirements()
if rbranchmap:
branchmap.replacecache(repo, rbranchmap)
repo.invalidate()
finally:
lock.release()
def allowservergeneration(ui):
"""Whether streaming clones are allowed from the server."""
return ui.configbool('server', 'uncompressed', True, untrusted=True)
# This is it's own function so extensions can override it.
def _walkstreamfiles(repo):
return repo.store.walk()
def generatev1(repo):
"""Emit content for version 1 of a streaming clone.
This is a generator of raw chunks that constitute a streaming clone.
The stream begins with a line of 2 space-delimited integers containing the
number of entries and total bytes size.
Next, are N entries for each file being transferred. Each file entry starts
as a line with the file name and integer size delimited by a null byte.
The raw file data follows. Following the raw file data is the next file
entry, or EOF.
When used on the wire protocol, an additional line indicating protocol
success will be prepended to the stream. This function is not responsible
for adding it.
This function will obtain a repository lock to ensure a consistent view of
the store is captured. It therefore may raise LockError.
"""
entries = []
total_bytes = 0
# Get consistent snapshot of repo, lock during scan.
lock = repo.lock()
try:
repo.ui.debug('scanning\n')
for name, ename, size in _walkstreamfiles(repo):
if size:
entries.append((name, size))
total_bytes += size
finally:
lock.release()
repo.ui.debug('%d files, %d bytes to transfer\n' %
(len(entries), total_bytes))
yield '%d %d\n' % (len(entries), total_bytes)
svfs = repo.svfs
oldaudit = svfs.mustaudit
debugflag = repo.ui.debugflag
svfs.mustaudit = False
try:
for name, size in entries:
if debugflag:
repo.ui.debug('sending %s (%d bytes)\n' % (name, size))
# partially encode name over the wire for backwards compat
yield '%s\0%d\n' % (store.encodedir(name), size)
if size <= 65536:
fp = svfs(name)
try:
data = fp.read(size)
finally:
fp.close()
yield data
else:
for chunk in util.filechunkiter(svfs(name), limit=size):
yield chunk
finally:
svfs.mustaudit = oldaudit
def consumev1(repo, fp):
"""Apply the contents from version 1 of a streaming clone file handle.
This takes the output from "streamout" and applies it to the specified
repository.
Like "streamout," the status line added by the wire protocol is not handled
by this function.
"""
lock = repo.lock()
try:
repo.ui.status(_('streaming all changes\n'))
l = fp.readline()
try:
total_files, total_bytes = map(int, l.split(' ', 1))
except (ValueError, TypeError):
raise error.ResponseError(
_('unexpected response from remote server:'), l)
repo.ui.status(_('%d files to transfer, %s of data\n') %
(total_files, util.bytecount(total_bytes)))
handled_bytes = 0
repo.ui.progress(_('clone'), 0, total=total_bytes)
start = time.time()
tr = repo.transaction(_('clone'))
try:
for i in xrange(total_files):
# XXX doesn't support '\n' or '\r' in filenames
l = fp.readline()
try:
name, size = l.split('\0', 1)
size = int(size)
except (ValueError, TypeError):
raise error.ResponseError(
_('unexpected response from remote server:'), l)
if repo.ui.debugflag:
repo.ui.debug('adding %s (%s)\n' %
(name, util.bytecount(size)))
# for backwards compat, name was partially encoded
ofp = repo.svfs(store.decodedir(name), 'w')
for chunk in util.filechunkiter(fp, limit=size):
handled_bytes += len(chunk)
repo.ui.progress(_('clone'), handled_bytes,
total=total_bytes)
ofp.write(chunk)
ofp.close()
tr.close()
finally:
tr.release()
# Writing straight to files circumvented the inmemory caches
repo.invalidate()
elapsed = time.time() - start
if elapsed <= 0:
elapsed = 0.001
repo.ui.progress(_('clone'), None)
repo.ui.status(_('transferred %s in %.1f seconds (%s/sec)\n') %
(util.bytecount(total_bytes), elapsed,
util.bytecount(total_bytes / elapsed)))
finally:
lock.release()