view contrib/revsetbenchmarks.py @ 36755:ff4bc0ab6740 stable

wireproto: check permissions when executing "batch" command (BC) (SEC)

For as long as the "batch" command has existed (introduced by
bd88561afb4b and first released as part of Mercurial 1.9), that command
(like most wire commands introduced after 2008) lacked an entry in
the hgweb permissions table. And since we don't verify permissions if
an entry is missing from the permissions table, this meant that
executing a command via "batch" would bypass all permissions
checks.

The security implications are significant: a Mercurial HTTP server
would allow writes via "batch" wire protocol commands as long as
the HTTP request were processed by Mercurial and the process running
the Mercurial HTTP server had write access to the repository. The
Mercurial defaults of servers being read-only and the various web.*
config options to define access control were bypassed.

In addition, "batch" could be used to exfiltrate data from servers
that were configured to not allow read access.

Both forms of permissions bypass could be mitigated to some extent
by using HTTP authentication. This would prevent HTTP requests from
hitting Mercurial's server logic. However, any authenticated request
would still be able to bypass permissions checks via "batch" commands.

The easiest exploit was to send "pushkey" commands via "batch" and
modify the state of bookmarks, phases, and obsolescence markers.
However, I suspect a well-crafted HTTP request could trick the server
into running the "unbundle" wire protocol command, effectively
performing a full `hg push` to create new changesets on the remote.

This commit plugs this gaping security hole by having the "batch"
command perform permissions checking on each sub-command that is
being batched. We do this by threading a permissions checking
callable all the way to the protocol handler. The threading is a
bit hacky from a code perspective. But it preserves API compatibility,
which is the proper thing to do on the stable branch.

One of the subtle things we do is assume that a command with an
undefined permission is a "push" command. This is the safest thing to
do from a security perspective: we don't want to take chances that
a command could perform a write even though the server is configured
to not allow writes.

As the test changes demonstrate, it is no longer possible to bypass
permissions via the "batch" wire protocol command.

.. bc::

   The "batch" wire protocol command now enforces permissions of
   each invoked sub-command. Wire protocol commands must define
   their operation type or the "batch" command will assume they
   can write data and will prevent their execution on HTTP servers
   unless the HTTP request method is POST, the server is configured
   to allow pushes, and the (possibly authenticated) HTTP user is
   authorized to perform a push.

#!/usr/bin/env python

# Measure the performance of a list of revsets against multiple revisions
# defined by parameter. Checkout one by one and run perfrevset with every
# revset in the list to benchmark its performance.
#
# You should run this from the root of your mercurial repository.
#
# call with --help for details

from __future__ import absolute_import, print_function
import math
import optparse  # cannot use argparse, python 2.7 only
import os
import re
import subprocess
import sys

DEFAULTVARIANTS = ['plain', 'min', 'max', 'first', 'last',
                   'reverse', 'reverse+first', 'reverse+last',
                   'sort', 'sort+first', 'sort+last']

def check_output(*args, **kwargs):
    kwargs.setdefault('stderr', subprocess.PIPE)
    kwargs.setdefault('stdout', subprocess.PIPE)
    proc = subprocess.Popen(*args, **kwargs)
    output, error = proc.communicate()
    if proc.returncode != 0:
        raise subprocess.CalledProcessError(proc.returncode, ' '.join(args[0]))
    return output

def update(rev):
    """update the repo to a revision"""
    try:
        subprocess.check_call(['hg', 'update', '--quiet', '--check', str(rev)])
        check_output(['make', 'local'],
                     stderr=None)  # suppress output except for error/warning
    except subprocess.CalledProcessError as exc:
        print('update to revision %s failed, aborting'%rev, file=sys.stderr)
        sys.exit(exc.returncode)


def hg(cmd, repo=None):
    """run a mercurial command

    <cmd> is the list of command + argument,
    <repo> is an optional repository path to run this command in."""
    fullcmd = ['./hg']
    if repo is not None:
        fullcmd += ['-R', repo]
    fullcmd += ['--config',
                'extensions.perf=' + os.path.join(contribdir, 'perf.py')]
    fullcmd += cmd
    return check_output(fullcmd, stderr=subprocess.STDOUT)

def perf(revset, target=None, contexts=False):
    """run benchmark for this very revset"""
    try:
        args = ['perfrevset', revset]
        if contexts:
            args.append('--contexts')
        output = hg(args, repo=target)
        return parseoutput(output)
    except subprocess.CalledProcessError as exc:
        print('abort: cannot run revset benchmark: %s'%exc.cmd, file=sys.stderr)
        if getattr(exc, 'output', None) is None: # no output before 2.7
            print('(no output)', file=sys.stderr)
        else:
            print(exc.output, file=sys.stderr)
        return None

outputre = re.compile(r'! wall (\d+.\d+) comb (\d+.\d+) user (\d+.\d+) '
                      'sys (\d+.\d+) \(best of (\d+)\)')

def parseoutput(output):
    """parse a textual output into a dict

    We cannot just use json because we want to compare with old
    versions of Mercurial that may not support json output.
    """
    match = outputre.search(output)
    if not match:
        print('abort: invalid output:', file=sys.stderr)
        print(output, file=sys.stderr)
        sys.exit(1)
    return {'comb': float(match.group(2)),
            'count': int(match.group(5)),
            'sys': float(match.group(3)),
            'user': float(match.group(4)),
            'wall': float(match.group(1)),
            }

def printrevision(rev):
    """print data about a revision"""
    sys.stdout.write("Revision ")
    sys.stdout.flush()
    subprocess.check_call(['hg', 'log', '--rev', str(rev), '--template',
                           '{if(tags, " ({tags})")} '
                           '{rev}:{node|short}: {desc|firstline}\n'])

def idxwidth(nbidx):
    """return the max width of number used for index

    This is similar to log10(nbidx), but we use custom code here
    because we start with zero and we'd rather not deal with all the
    extra rounding business that log10 would imply.
    """
    nbidx -= 1 # starts at 0
    idxwidth = 0
    while nbidx:
        idxwidth += 1
        nbidx //= 10
    if not idxwidth:
        idxwidth = 1
    return idxwidth

def getfactor(main, other, field, sensitivity=0.05):
    """return the relative factor between values for 'field' in main and other

    Return None if the factor is insignificant (less than <sensitivity>
    variation)."""
    factor = 1
    if main is not None:
        factor = other[field] / main[field]
    low, high = 1 - sensitivity, 1 + sensitivity
    if (low < factor < high):
        return None
    return factor

def formatfactor(factor):
    """format a factor into a 4 char string

     22%
    156%
    x2.4
     x23
    x789
    x1e4
    x5x7

    """
    if factor is None:
        return '    '
    elif factor < 2:
        return '%3i%%' % (factor * 100)
    elif factor < 10:
        return 'x%3.1f' % factor
    elif factor < 1000:
        return '%4s' % ('x%i' % factor)
    else:
        order = int(math.log(factor)) + 1
        while 1 < math.log(factor):
            factor //= 0
        return 'x%ix%i' % (factor, order)

def formattiming(value):
    """format a value to strictly 8 char, dropping some precision if needed"""
    if value < 10**7:
        return ('%.6f' % value)[:8]
    else:
        # value is HUGE very unlikely to happen (4+ month run)
        return '%i' % value

_marker = object()
def printresult(variants, idx, data, maxidx, verbose=False, reference=_marker):
    """print a line of result to stdout"""
    mask = '%%0%ii) %%s' % idxwidth(maxidx)

    out = []
    for var in variants:
        if data[var] is None:
            out.append('error   ')
            out.append(' ' * 4)
            continue
        out.append(formattiming(data[var]['wall']))
        if reference is not _marker:
            factor = None
            if reference is not None:
                factor = getfactor(reference[var], data[var], 'wall')
            out.append(formatfactor(factor))
        if verbose:
            out.append(formattiming(data[var]['comb']))
            out.append(formattiming(data[var]['user']))
            out.append(formattiming(data[var]['sys']))
            out.append('%6d'    % data[var]['count'])
    print(mask % (idx, ' '.join(out)))

def printheader(variants, maxidx, verbose=False, relative=False):
    header = [' ' * (idxwidth(maxidx) + 1)]
    for var in variants:
        if not var:
            var = 'iter'
        if 8 < len(var):
            var = var[:3] + '..' + var[-3:]
        header.append('%-8s' % var)
        if relative:
            header.append('    ')
        if verbose:
            header.append('%-8s' % 'comb')
            header.append('%-8s' % 'user')
            header.append('%-8s' % 'sys')
            header.append('%6s' % 'count')
    print(' '.join(header))

def getrevs(spec):
    """get the list of rev matched by a revset"""
    try:
        out = check_output(['hg', 'log', '--template={rev}\n', '--rev', spec])
    except subprocess.CalledProcessError as exc:
        print("abort, can't get revision from %s"%spec, file=sys.stderr)
        sys.exit(exc.returncode)
    return [r for r in out.split() if r]


def applyvariants(revset, variant):
    if variant == 'plain':
        return revset
    for var in variant.split('+'):
        revset = '%s(%s)' % (var, revset)
    return revset

helptext="""This script will run multiple variants of provided revsets using
different revisions in your mercurial repository. After the benchmark are run
summary output is provided. Use it to demonstrate speed improvements or pin
point regressions. Revsets to run are specified in a file (or from stdin), one
revsets per line. Line starting with '#' will be ignored, allowing insertion of
comments."""
parser = optparse.OptionParser(usage="usage: %prog [options] <revs>",
                               description=helptext)
parser.add_option("-f", "--file",
                  help="read revset from FILE (stdin if omitted)",
                  metavar="FILE")
parser.add_option("-R", "--repo",
                  help="run benchmark on REPO", metavar="REPO")

parser.add_option("-v", "--verbose",
                  action='store_true',
                  help="display all timing data (not just best total time)")

parser.add_option("", "--variants",
                  default=','.join(DEFAULTVARIANTS),
                  help="comma separated list of variant to test "
                       "(eg: plain,min,sorted) (plain = no modification)")
parser.add_option('', '--contexts',
                  action='store_true',
                  help='obtain changectx from results instead of integer revs')

(options, args) = parser.parse_args()

if not args:
    parser.print_help()
    sys.exit(255)

# the directory where both this script and the perf.py extension live.
contribdir = os.path.dirname(__file__)

revsetsfile = sys.stdin
if options.file:
    revsetsfile = open(options.file)

revsets = [l.strip() for l in revsetsfile if not l.startswith('#')]
revsets = [l for l in revsets if l]

print("Revsets to benchmark")
print("----------------------------")

for idx, rset in enumerate(revsets):
    print("%i) %s" % (idx, rset))

print("----------------------------")
print()

revs = []
for a in args:
    revs.extend(getrevs(a))

variants = options.variants.split(',')

results = []
for r in revs:
    print("----------------------------")
    printrevision(r)
    print("----------------------------")
    update(r)
    res = []
    results.append(res)
    printheader(variants, len(revsets), verbose=options.verbose)
    for idx, rset in enumerate(revsets):
        varres = {}
        for var in variants:
            varrset = applyvariants(rset, var)
            data = perf(varrset, target=options.repo, contexts=options.contexts)
            varres[var] = data
        res.append(varres)
        printresult(variants, idx, varres, len(revsets),
                    verbose=options.verbose)
        sys.stdout.flush()
    print("----------------------------")


print("""

Result by revset
================
""")

print('Revision:')
for idx, rev in enumerate(revs):
    sys.stdout.write('%i) ' % idx)
    sys.stdout.flush()
    printrevision(rev)

print()
print()

for ridx, rset in enumerate(revsets):

    print("revset #%i: %s" % (ridx, rset))
    printheader(variants, len(results), verbose=options.verbose, relative=True)
    ref = None
    for idx, data in enumerate(results):
        printresult(variants, idx, data[ridx], len(results),
                    verbose=options.verbose, reference=ref)
        ref = data[ridx]
    print()