view hgext/gpg.py @ 36755:ff4bc0ab6740 stable

wireproto: check permissions when executing "batch" command (BC) (SEC)

For as long as the "batch" command has existed (introduced by
bd88561afb4b and first released as part of Mercurial 1.9), that command
(like most wire commands introduced after 2008) lacked an entry in
the hgweb permissions table. And since we don't verify permissions if
an entry is missing from the permissions table, this meant that
executing a command via "batch" would bypass all permissions
checks.

The security implications are significant: a Mercurial HTTP server
would allow writes via "batch" wire protocol commands as long as
the HTTP request were processed by Mercurial and the process running
the Mercurial HTTP server had write access to the repository. The
Mercurial defaults of servers being read-only and the various web.*
config options to define access control were bypassed.

In addition, "batch" could be used to exfiltrate data from servers
that were configured to not allow read access.

Both forms of permissions bypass could be mitigated to some extent
by using HTTP authentication. This would prevent HTTP requests from
hitting Mercurial's server logic. However, any authenticated request
would still be able to bypass permissions checks via "batch" commands.

The easiest exploit was to send "pushkey" commands via "batch" and
modify the state of bookmarks, phases, and obsolescence markers.
However, I suspect a well-crafted HTTP request could trick the server
into running the "unbundle" wire protocol command, effectively
performing a full `hg push` to create new changesets on the remote.

This commit plugs this gaping security hole by having the "batch"
command perform permissions checking on each sub-command that is
being batched. We do this by threading a permissions checking
callable all the way to the protocol handler. The threading is a
bit hacky from a code perspective. But it preserves API compatibility,
which is the proper thing to do on the stable branch.

One of the subtle things we do is assume that a command with an
undefined permission is a "push" command. This is the safest thing to
do from a security perspective: we don't want to take chances that
a command could perform a write even though the server is configured
to not allow writes.

As the test changes demonstrate, it is no longer possible to bypass
permissions via the "batch" wire protocol command.

.. bc::

   The "batch" wire protocol command now enforces permissions of
   each invoked sub-command. Wire protocol commands must define
   their operation type or the "batch" command will assume they
   can write data and will prevent their execution on HTTP servers
   unless the HTTP request method is POST, the server is configured
   to allow pushes, and the (possibly authenticated) HTTP user is
   authorized to perform a push.

# Copyright 2005, 2006 Benoit Boissinot <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to sign and verify changesets'''

from __future__ import absolute_import

import binascii
import os
import tempfile

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    error,
    match,
    node as hgnode,
    pycompat,
    registrar,
    util,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

configitem('gpg', 'cmd',
    default='gpg',
)
configitem('gpg', 'key',
    default=None,
)
configitem('gpg', '.*',
    default=None,
    generic=True,
)

class gpg(object):
    def __init__(self, path, key=None):
        self.path = path
        self.key = (key and " --local-user \"%s\"" % key) or ""

    def sign(self, data):
        gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
        return util.filter(data, gpgcmd)

    def verify(self, data, sig):
        """ returns of the good and bad signatures"""
        sigfile = datafile = None
        try:
            # create temporary files
            fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
            fp = os.fdopen(fd, pycompat.sysstr('wb'))
            fp.write(sig)
            fp.close()
            fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
            fp = os.fdopen(fd, pycompat.sysstr('wb'))
            fp.write(data)
            fp.close()
            gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
                      "\"%s\" \"%s\"" % (self.path, sigfile, datafile))
            ret = util.filter("", gpgcmd)
        finally:
            for f in (sigfile, datafile):
                try:
                    if f:
                        os.unlink(f)
                except OSError:
                    pass
        keys = []
        key, fingerprint = None, None
        for l in ret.splitlines():
            # see DETAILS in the gnupg documentation
            # filter the logger output
            if not l.startswith("[GNUPG:]"):
                continue
            l = l[9:]
            if l.startswith("VALIDSIG"):
                # fingerprint of the primary key
                fingerprint = l.split()[10]
            elif l.startswith("ERRSIG"):
                key = l.split(" ", 3)[:2]
                key.append("")
                fingerprint = None
            elif (l.startswith("GOODSIG") or
                  l.startswith("EXPSIG") or
                  l.startswith("EXPKEYSIG") or
                  l.startswith("BADSIG")):
                if key is not None:
                    keys.append(key + [fingerprint])
                key = l.split(" ", 2)
                fingerprint = None
        if key is not None:
            keys.append(key + [fingerprint])
        return keys

def newgpg(ui, **opts):
    """create a new gpg instance"""
    gpgpath = ui.config("gpg", "cmd")
    gpgkey = opts.get(r'key')
    if not gpgkey:
        gpgkey = ui.config("gpg", "key")
    return gpg(gpgpath, gpgkey)

def sigwalk(repo):
    """
    walk over every sigs, yields a couple
    ((node, version, sig), (filename, linenumber))
    """
    def parsefile(fileiter, context):
        ln = 1
        for l in fileiter:
            if not l:
                continue
            yield (l.split(" ", 2), (context, ln))
            ln += 1

    # read the heads
    fl = repo.file(".hgsigs")
    for r in reversed(fl.heads()):
        fn = ".hgsigs|%s" % hgnode.short(r)
        for item in parsefile(fl.read(r).splitlines(), fn):
            yield item
    try:
        # read local signatures
        fn = "localsigs"
        for item in parsefile(repo.vfs(fn), fn):
            yield item
    except IOError:
        pass

def getkeys(ui, repo, mygpg, sigdata, context):
    """get the keys who signed a data"""
    fn, ln = context
    node, version, sig = sigdata
    prefix = "%s:%d" % (fn, ln)
    node = hgnode.bin(node)

    data = node2txt(repo, node, version)
    sig = binascii.a2b_base64(sig)
    keys = mygpg.verify(data, sig)

    validkeys = []
    # warn for expired key and/or sigs
    for key in keys:
        if key[0] == "ERRSIG":
            ui.write(_("%s Unknown key ID \"%s\"\n")
                     % (prefix, shortkey(ui, key[1][:15])))
            continue
        if key[0] == "BADSIG":
            ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
            continue
        if key[0] == "EXPSIG":
            ui.write(_("%s Note: Signature has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        elif key[0] == "EXPKEYSIG":
            ui.write(_("%s Note: This key has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        validkeys.append((key[1], key[2], key[3]))
    return validkeys

@command("sigs", [], _('hg sigs'))
def sigs(ui, repo):
    """list signed changesets"""
    mygpg = newgpg(ui)
    revs = {}

    for data, context in sigwalk(repo):
        node, version, sig = data
        fn, ln = context
        try:
            n = repo.lookup(node)
        except KeyError:
            ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
            continue
        r = repo.changelog.rev(n)
        keys = getkeys(ui, repo, mygpg, data, context)
        if not keys:
            continue
        revs.setdefault(r, [])
        revs[r].extend(keys)
    for rev in sorted(revs, reverse=True):
        for k in revs[rev]:
            r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
            ui.write("%-30s %s\n" % (keystr(ui, k), r))

@command("sigcheck", [], _('hg sigcheck REV'))
def sigcheck(ui, repo, rev):
    """verify all the signatures there may be for a particular revision"""
    mygpg = newgpg(ui)
    rev = repo.lookup(rev)
    hexrev = hgnode.hex(rev)
    keys = []

    for data, context in sigwalk(repo):
        node, version, sig = data
        if node == hexrev:
            k = getkeys(ui, repo, mygpg, data, context)
            if k:
                keys.extend(k)

    if not keys:
        ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
        return

    # print summary
    ui.write(_("%s is signed by:\n") % hgnode.short(rev))
    for key in keys:
        ui.write(" %s\n" % keystr(ui, key))

def keystr(ui, key):
    """associate a string to a key (username, comment)"""
    keyid, user, fingerprint = key
    comment = ui.config("gpg", fingerprint)
    if comment:
        return "%s (%s)" % (user, comment)
    else:
        return user

@command("sign",
         [('l', 'local', None, _('make the signature local')),
          ('f', 'force', None, _('sign even if the sigfile is modified')),
          ('', 'no-commit', None, _('do not commit the sigfile after signing')),
          ('k', 'key', '',
           _('the key id to sign with'), _('ID')),
          ('m', 'message', '',
           _('use text as commit message'), _('TEXT')),
          ('e', 'edit', False, _('invoke editor on commit messages')),
         ] + cmdutil.commitopts2,
         _('hg sign [OPTION]... [REV]...'))
def sign(ui, repo, *revs, **opts):
    """add a signature for the current or given revision

    If no revision is given, the parent of the working directory is used,
    or tip if no revision is checked out.

    The ``gpg.cmd`` config setting can be used to specify the command
    to run. A default key can be specified with ``gpg.key``.

    See :hg:`help dates` for a list of formats valid for -d/--date.
    """
    with repo.wlock():
        return _dosign(ui, repo, *revs, **opts)

def _dosign(ui, repo, *revs, **opts):
    mygpg = newgpg(ui, **opts)
    opts = pycompat.byteskwargs(opts)
    sigver = "0"
    sigmessage = ""

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    if revs:
        nodes = [repo.lookup(n) for n in revs]
    else:
        nodes = [node for node in repo.dirstate.parents()
                 if node != hgnode.nullid]
        if len(nodes) > 1:
            raise error.Abort(_('uncommitted merge - please provide a '
                               'specific revision'))
        if not nodes:
            nodes = [repo.changelog.tip()]

    for n in nodes:
        hexnode = hgnode.hex(n)
        ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
                                         hgnode.short(n)))
        # build data
        data = node2txt(repo, n, sigver)
        sig = mygpg.sign(data)
        if not sig:
            raise error.Abort(_("error while signing"))
        sig = binascii.b2a_base64(sig)
        sig = sig.replace("\n", "")
        sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)

    # write it
    if opts['local']:
        repo.vfs.append("localsigs", sigmessage)
        return

    if not opts["force"]:
        msigs = match.exact(repo.root, '', ['.hgsigs'])
        if any(repo.status(match=msigs, unknown=True, ignored=True)):
            raise error.Abort(_("working copy of .hgsigs is changed "),
                             hint=_("please commit .hgsigs manually"))

    sigsfile = repo.wvfs(".hgsigs", "ab")
    sigsfile.write(sigmessage)
    sigsfile.close()

    if '.hgsigs' not in repo.dirstate:
        repo[None].add([".hgsigs"])

    if opts["no_commit"]:
        return

    message = opts['message']
    if not message:
        # we don't translate commit messages
        message = "\n".join(["Added signature for changeset %s"
                             % hgnode.short(n)
                             for n in nodes])
    try:
        editor = cmdutil.getcommiteditor(editform='gpg.sign',
                                         **pycompat.strkwargs(opts))
        repo.commit(message, opts['user'], opts['date'], match=msigs,
                    editor=editor)
    except ValueError as inst:
        raise error.Abort(str(inst))

def shortkey(ui, key):
    if len(key) != 16:
        ui.debug("key ID \"%s\" format error\n" % key)
        return key

    return key[-8:]

def node2txt(repo, node, ver):
    """map a manifest into some text"""
    if ver == "0":
        return "%s\n" % hgnode.hex(node)
    else:
        raise error.Abort(_("unknown signature version"))