view tests/test-bheads.t @ 36755:ff4bc0ab6740 stable

wireproto: check permissions when executing "batch" command (BC) (SEC)

For as long as the "batch" command has existed (introduced by
bd88561afb4b and first released as part of Mercurial 1.9), that command
(like most wire commands introduced after 2008) lacked an entry in
the hgweb permissions table. And since we don't verify permissions if
an entry is missing from the permissions table, this meant that
executing a command via "batch" would bypass all permissions
checks.

The security implications are significant: a Mercurial HTTP server
would allow writes via "batch" wire protocol commands as long as
the HTTP request were processed by Mercurial and the process running
the Mercurial HTTP server had write access to the repository. The
Mercurial defaults of servers being read-only and the various web.*
config options to define access control were bypassed.

In addition, "batch" could be used to exfiltrate data from servers
that were configured to not allow read access.

Both forms of permissions bypass could be mitigated to some extent
by using HTTP authentication. This would prevent HTTP requests from
hitting Mercurial's server logic. However, any authenticated request
would still be able to bypass permissions checks via "batch" commands.

The easiest exploit was to send "pushkey" commands via "batch" and
modify the state of bookmarks, phases, and obsolescence markers.
However, I suspect a well-crafted HTTP request could trick the server
into running the "unbundle" wire protocol command, effectively
performing a full `hg push` to create new changesets on the remote.

This commit plugs this gaping security hole by having the "batch"
command perform permissions checking on each sub-command that is
being batched. We do this by threading a permissions checking
callable all the way to the protocol handler. The threading is a
bit hacky from a code perspective. But it preserves API compatibility,
which is the proper thing to do on the stable branch.

One of the subtle things we do is assume that a command with an
undefined permission is a "push" command. This is the safest thing to
do from a security perspective: we don't want to take chances that
a command could perform a write even though the server is configured
to not allow writes.

As the test changes demonstrate, it is no longer possible to bypass
permissions via the "batch" wire protocol command.

.. bc::

   The "batch" wire protocol command now enforces permissions of
   each invoked sub-command. Wire protocol commands must define
   their operation type or the "batch" command will assume they
   can write data and will prevent their execution on HTTP servers
   unless the HTTP request method is POST, the server is configured
   to allow pushes, and the (possibly authenticated) HTTP user is
   authorized to perform a push.

  $ heads()
  > {
  >    hg heads --template '{rev}: {desc|firstline|strip} ({branches})\n' "$@"
  > }

  $ hg init a
  $ cd a
  $ echo 'root' >root
  $ hg add root
  $ hg commit -m "Adding root node"
  $ heads
  0: Adding root node ()
-------
  $ heads .
  0: Adding root node ()

=======

  $ echo 'a' >a
  $ hg add a
  $ hg branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ hg commit -m "Adding a branch"
  $ heads
  1: Adding a branch (a)
  0: Adding root node ()
-------
  $ heads .
  1: Adding a branch (a)

=======

  $ hg update -C 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'b' >b
  $ hg add b
  $ hg branch b
  marked working directory as branch b
  $ hg commit -m "Adding b branch"
  $ heads
  2: Adding b branch (b)
  1: Adding a branch (a)
  0: Adding root node ()
-------
  $ heads .
  2: Adding b branch (b)

=======

  $ echo 'bh1' >bh1
  $ hg add bh1
  $ hg commit -m "Adding b branch head 1"
  $ heads
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
-------
  $ heads .
  3: Adding b branch head 1 (b)

=======

  $ hg update -C 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'bh2' >bh2
  $ hg add bh2
  $ hg commit -m "Adding b branch head 2"
  created new head
  $ heads
  4: Adding b branch head 2 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  $ heads .
  4: Adding b branch head 2 (b)
  3: Adding b branch head 1 (b)

=======

  $ hg update -C 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'bh3' >bh3
  $ hg add bh3
  $ hg commit -m "Adding b branch head 3"
  created new head
  $ heads
  5: Adding b branch head 3 (b)
  4: Adding b branch head 2 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
-------
  $ heads .
  5: Adding b branch head 3 (b)
  4: Adding b branch head 2 (b)
  3: Adding b branch head 1 (b)

=======

  $ hg merge 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg commit -m "Merging b branch head 2 and b branch head 3"
  $ heads
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
-------
  $ heads .
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)

=======

  $ echo 'c' >c
  $ hg add c
  $ hg branch c
  marked working directory as branch c
  $ hg commit -m "Adding c branch"
  $ heads
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
-------
  $ heads .
  7: Adding c branch (c)

=======

  $ heads -r 3 .
  no open branch heads found on branches c (started at 3)
  [1]
  $ heads -r 2 .
  7: Adding c branch (c)
-------
  $ hg update -C 4
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
-------
  $ heads -r 3 .
  3: Adding b branch head 1 (b)
-------
  $ heads -r 2 .
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
-------
  $ heads -r 7 .
  no open branch heads found on branches b (started at 7)
  [1]

=======

  $ for i in 0 1 2 3 4 5 6 7; do
  >     hg update -C "$i"
  >     heads
  >     echo '-------'
  >     heads .
  >     echo '-------'
  > done
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  0: Adding root node ()
  -------
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  1: Adding a branch (a)
  -------
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  -------
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  -------
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  -------
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  -------
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  -------
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()
  -------
  7: Adding c branch (c)
  -------

=======

  $ for i in a b c z; do
  >     heads "$i"
  >     echo '-------'
  > done
  1: Adding a branch (a)
  -------
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  -------
  7: Adding c branch (c)
  -------
  abort: unknown revision 'z'!
  -------

=======

  $ heads 0 1 2 3 4 5 6 7
  7: Adding c branch (c)
  6: Merging b branch head 2 and b branch head 3 (b)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)
  0: Adding root node ()

Topological heads:

  $ heads -t
  7: Adding c branch (c)
  3: Adding b branch head 1 (b)
  1: Adding a branch (a)

  $ cd ..
______________

"created new head" message tests

  $ hg init newheadmsg
  $ cd newheadmsg

Init: no msg

  $ echo 1 > a
  $ hg ci -Am "a0: Initial root"
  adding a
  $ echo 2 >> a
  $ hg ci -m "a1 (HN)"

  $ hg branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ echo 1 > b
  $ hg ci -Am "b2: Initial root for branch b"
  adding b
  $ echo 2 >> b
  $ hg ci -m "b3 (HN)"

Case NN: msg

  $ hg up -q null
  $ hg branch -f b
  marked working directory as branch b
  $ echo 1 > bb
  $ hg ci -Am "b4 (NN): new topo root for branch b"
  adding bb
  created new head

Case HN: no msg

  $ echo 2 >> bb
  $ hg ci -m "b5 (HN)"

Case BN: msg

  $ hg branch -f default
  marked working directory as branch default
  $ echo 1 > aa
  $ hg ci -Am "a6 (BN): new branch root"
  adding aa
  created new head

Case CN: msg

  $ hg up -q 4
  $ echo 3 >> bbb
  $ hg ci -Am "b7 (CN): regular new head"
  adding bbb
  created new head

Case BB: msg

  $ hg up -q 4
  $ hg merge -q 3
  $ hg branch -f default
  marked working directory as branch default
  $ hg ci -m "a8 (BB): weird new branch root"
  created new head

Case CB: msg

  $ hg up -q 4
  $ hg merge -q 1
  $ hg ci -m "b9 (CB): new head from branch merge"
  created new head

Case HB: no msg

  $ hg up -q 7
  $ hg merge -q 6
  $ hg ci -m "b10 (HB): continuing head from branch merge"

Case CC: msg

  $ hg up -q 4
  $ hg merge -q 2
  $ hg ci -m "b11 (CC): new head from merge"
  created new head

Case CH: no msg

  $ hg up -q 2
  $ hg merge -q 10
  $ hg ci -m "b12 (CH): continuing head from merge"

Case HH: no msg

  $ hg merge -q 3
  $ hg ci -m "b12 (HH): merging two heads"

  $ cd ..