view tests/test-import-merge.t @ 36755:ff4bc0ab6740 stable

wireproto: check permissions when executing "batch" command (BC) (SEC)

For as long as the "batch" command has existed (introduced by
bd88561afb4b and first released as part of Mercurial 1.9), that command
(like most wire commands introduced after 2008) lacked an entry in
the hgweb permissions table. And since we don't verify permissions if
an entry is missing from the permissions table, this meant that
executing a command via "batch" would bypass all permissions
checks.

The security implications are significant: a Mercurial HTTP server
would allow writes via "batch" wire protocol commands as long as
the HTTP request were processed by Mercurial and the process running
the Mercurial HTTP server had write access to the repository. The
Mercurial defaults of servers being read-only and the various web.*
config options to define access control were bypassed.

In addition, "batch" could be used to exfiltrate data from servers
that were configured to not allow read access.

Both forms of permissions bypass could be mitigated to some extent
by using HTTP authentication. This would prevent HTTP requests from
hitting Mercurial's server logic. However, any authenticated request
would still be able to bypass permissions checks via "batch" commands.

The easiest exploit was to send "pushkey" commands via "batch" and
modify the state of bookmarks, phases, and obsolescence markers.
However, I suspect a well-crafted HTTP request could trick the server
into running the "unbundle" wire protocol command, effectively
performing a full `hg push` to create new changesets on the remote.

This commit plugs this gaping security hole by having the "batch"
command perform permissions checking on each sub-command that is
being batched. We do this by threading a permissions checking
callable all the way to the protocol handler. The threading is a
bit hacky from a code perspective. But it preserves API compatibility,
which is the proper thing to do on the stable branch.

One of the subtle things we do is assume that a command with an
undefined permission is a "push" command. This is the safest thing to
do from a security perspective: we don't want to take chances that
a command could perform a write even though the server is configured
to not allow writes.

As the test changes demonstrate, it is no longer possible to bypass
permissions via the "batch" wire protocol command.

.. bc::

   The "batch" wire protocol command now enforces permissions of
   each invoked sub-command. Wire protocol commands must define
   their operation type or the "batch" command will assume they
   can write data and will prevent their execution on HTTP servers
   unless the HTTP request method is POST, the server is configured
   to allow pushes, and the (possibly authenticated) HTTP user is
   authorized to perform a push.

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ tipparents() {
  > hg parents --template "{rev}:{node|short} {desc|firstline}\n" -r tip
  > }

Test import and merge diffs

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo a >> a
  $ hg ci -m changea
  $ echo c > c
  $ hg ci -Am addc
  adding c
  $ hg up 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b > b
  $ hg ci -Am addb
  adding b
  created new head
  $ hg up 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m merge
  $ hg export . > ../merge.diff
  $ grep -v '^merge$' ../merge.diff > ../merge.nomsg.diff
  $ cd ..
  $ hg clone -r2 repo repo2
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files
  new changesets 07f494440405:890ecaa90481
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd repo2
  $ hg pull -r3 ../repo
  pulling from ../repo
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 102a90ea7b4a
  (run 'hg heads' to see heads, 'hg merge' to merge)

Test without --exact and diff.p1 == workingdir.p1

  $ hg up 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ cat > $TESTTMP/editor.sh <<EOF
  > env | grep HGEDITFORM
  > echo merge > \$1
  > EOF
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg import --edit ../merge.nomsg.diff
  applying ../merge.nomsg.diff
  HGEDITFORM=import.normal.merge
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test without --exact and diff.p1 != workingdir.p1

  $ hg up 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg import ../merge.diff
  applying ../merge.diff
  warning: import the patch as a normal revision
  (use --exact to import the patch as a merge)
  $ tipparents
  2:890ecaa90481 addc
  $ hg strip --no-backup tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test with --exact

  $ hg import --exact ../merge.diff
  applying ../merge.diff
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test with --bypass and diff.p1 == workingdir.p1

  $ hg up 1
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg import --bypass ../merge.diff
  applying ../merge.diff
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip

Test with --bypass and diff.p1 != workingdir.p1

  $ hg up 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg import --bypass ../merge.diff
  applying ../merge.diff
  warning: import the patch as a normal revision
  (use --exact to import the patch as a merge)
  $ tipparents
  2:890ecaa90481 addc
  $ hg strip --no-backup tip

Test with --bypass and --exact

  $ hg import --bypass --exact ../merge.diff
  applying ../merge.diff
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip

  $ cd ..

Test that --exact on a bad header doesn't corrupt the repo (issue3616)

  $ hg init repo3
  $ cd repo3
  $ echo a>a
  $ hg ci -Aqm0
  $ echo a>>a
  $ hg ci -m1
  $ echo a>>a
  $ hg ci -m2
  $ echo a>a
  $ echo b>>a
  $ echo a>>a
  $ hg ci -m3
  $ hg export 2 | head -7 > ../a.patch
  $ hg export tip > out
  >>> apatch = open("../a.patch", "ab")
  >>> apatch.write("".join(open("out").readlines()[7:]))

  $ cd ..
  $ hg clone -qr0 repo3 repo3-clone
  $ cd repo3-clone
  $ hg pull -qr1 ../repo3

  $ hg import --exact ../a.patch
  applying ../a.patch
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  patching file a
  Hunk #1 succeeded at 1 with fuzz 1 (offset -1 lines).
  transaction abort!
  rollback completed
  abort: patch is damaged or loses information
  [255]
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions