Mercurial: revision graph

graph

less more | rev 40772: (0) -30000 -10000 -3000 -1000 -480 +480 +1000 +3000 +10000 tip

perf: add a `--clear-caches` to `perfbranchmapupdate`
Fri, 23 Nov 2018 01:09:37 +0100, by Boris Feld
perf: start from an existing branchmap if possible
Wed, 21 Nov 2018 21:11:47 +0000, by Boris Feld
perf: rely on repoview for perfbranchmapupdate
Wed, 21 Nov 2018 20:35:22 +0000, by Boris Feld
perf: pre-indent some code in `perfbranchmapupdate`
Wed, 21 Nov 2018 22:56:06 +0100, by Boris Feld
perf: add a `perfbranchmapupdate` command
Wed, 21 Nov 2018 12:02:25 +0000, by Boris Feld
push: config option to control behavior when pushing to a publishing server
Mon, 05 Nov 2018 13:52:19 +0800, by Anton Shestakov
narrowcommands: remove an unrequired `repo.narrowpats` call
Fri, 30 Nov 2018 17:42:55 +0300, by Pulkit Goyal
manifest: reject lines shorter than 42 bytes, not 22
Thu, 29 Nov 2018 16:44:01 -0500, by Augie Fackler
blackbox: initialize logger with repo instance
Sun, 11 Nov 2018 20:05:38 +0900, by Yuya Nishihara
blackbox: do not nullify repo to deactivate the logger on failure
Sat, 17 Nov 2018 20:56:25 +0900, by Yuya Nishihara
blackbox: extract global last logger to proxylogger class
Sun, 11 Nov 2018 20:02:34 +0900, by Yuya Nishihara
ui: pass in bytes opts dict to logger.log()
Sun, 11 Nov 2018 19:36:21 +0900, by Yuya Nishihara
ui: pass in formatted message to logger.log()
Sun, 11 Nov 2018 19:35:33 +0900, by Yuya Nishihara
blackbox: send debug message to logger by core ui
Sun, 11 Nov 2018 17:34:46 +0900, by Yuya Nishihara
blackbox: change the way of deactivating the logger on write error
Sat, 17 Nov 2018 20:23:50 +0900, by Yuya Nishihara
match: remove obsolete catching of OverflowError
Wed, 28 Nov 2018 10:12:50 -0800, by Martin von Zweigbergk
sparse: raise a move verbose index error from the C code
Tue, 27 Nov 2018 02:10:14 +0100, by Boris Feld
narrow: drop the bundle2 capability since we have server capabilities (BC)
Fri, 05 Oct 2018 23:10:56 +0300, by Pulkit Goyal
vfs: extract the audit path logic into a submethod
Sun, 02 Jul 2017 04:06:24 +0200, by Boris Feld
subrepo-git: use an official origvfs when appropriate
Thu, 22 Nov 2018 20:01:28 +0100, by Boris Feld
revert: extract origvfs logic in a sub-function
Thu, 22 Nov 2018 19:26:05 +0100, by Boris Feld
vfs: treat 'undo.' file the same as 'journal.' file
Thu, 22 Nov 2018 18:44:07 +0100, by Boris Feld
perf: add a perfignore command
Thu, 22 Nov 2018 21:00:13 +0100, by Boris Feld
py3: use pycompat.xrange instead of xrange
Mon, 26 Nov 2018 15:36:06 +0300, by Pulkit Goyal
store: write fncache only once if there are both adds and removes
Tue, 27 Nov 2018 16:16:13 +0300, by Pulkit Goyal
perf: disable revlogs clearing in `perftags` by default
Tue, 20 Nov 2018 17:44:24 +0000, by Boris Feld
perf: add a `clear-revlogs` flag to `perfbookmarks`
Tue, 20 Nov 2018 10:55:20 +0000, by Boris Feld
tags: cache `repo.changelog` access when checking tags nodes
Tue, 20 Nov 2018 10:38:15 +0000, by Boris Feld
perf: add a `clear-revlogs` flag to `perftags`
Tue, 20 Nov 2018 10:46:20 +0000, by Boris Feld
perf: stop creating new revlog by hand in perftags
Sun, 25 Nov 2018 13:37:53 +0100, by Boris Feld
revlog: update the documentation for `trim_endidx`
Mon, 26 Nov 2018 00:23:12 +0100, by Boris Feld
revlog: properly detect corrupted revlog in `index_get_length`
Mon, 26 Nov 2018 00:21:09 +0100, by Boris Feld
perf: rename `perfhelper-tracecopies` to `perfhelper-pathcopies`
Mon, 26 Nov 2018 00:15:12 +0100, by Boris Feld
perf: add a docstring to `perfpathcopies`
Mon, 26 Nov 2018 00:13:50 +0100, by Boris Feld
revlog: update the docstring of `ancestors` to match reality
Mon, 26 Nov 2018 00:08:11 +0100, by Boris Feld
remotefilelog: fix typo in docstring
Mon, 26 Nov 2018 15:53:34 -0500, by Augie Fackler
store: append to fncache if there are only new files to write
Fri, 23 Nov 2018 18:58:16 +0300, by Pulkit Goyal
py3: fix couple of division operator to do integer divison
Mon, 26 Nov 2018 15:38:35 +0300, by Pulkit Goyal
py3: use dict.items() instead of dict.iteritems()
Mon, 26 Nov 2018 15:37:48 +0300, by Pulkit Goyal
py3: convert strings to bytes in tests/test-remotefilelog-histpack.py
Mon, 26 Nov 2018 15:36:51 +0300, by Pulkit Goyal
py3: replace str() with pycompat.bytestr() or ('%d' % int)
Fri, 23 Nov 2018 21:54:03 +0300, by Pulkit Goyal
perf: add a `--timing` argument to `perfhelper-tracecopies`
Fri, 23 Nov 2018 19:32:51 +0100, by Boris Feld
ui: manage logger instances and event filtering by core ui
Sun, 11 Nov 2018 18:08:33 +0900, by Yuya Nishihara
extensions: add "uipopulate" hook, called per instance, not per process
Mon, 12 Nov 2018 21:10:51 +0900, by Yuya Nishihara
hgweb: load globally-enabled extensions explicitly
Sat, 17 Nov 2018 19:11:45 +0900, by Yuya Nishihara
tests: sniff for libfuzzer actually being available in test-fuzz-targets.t stable
Wed, 14 Nov 2018 10:12:43 -0500, by Augie Fackler
tests: sniff for /usr/local/bin/gmake and use it in test-fuzz-targets.t stable
Wed, 14 Nov 2018 10:11:37 -0500, by Augie Fackler
tests: stabilize test-inherit-mode.t on FreeBSD and macOS (issue6026) stable
Thu, 29 Nov 2018 16:25:37 -0500, by Augie Fackler
wireprotov2peer: wait for initial object before resolving future stable
Wed, 28 Nov 2018 12:52:23 -0800, by Gregory Szorc
wireprotov2peer: always return a bool from _processredirect() stable
Wed, 28 Nov 2018 10:37:43 -0800, by Gregory Szorc
tests: disable remotefilelog on Windows
Sat, 24 Nov 2018 14:11:02 -0500, by Matt Harbison
perf: run 'setup' function during stub run
Thu, 22 Nov 2018 23:48:44 +0100, by Boris Feld
perf: fallback to subset if ondisk cache is missing in perfbranchmapload
Fri, 23 Nov 2018 02:08:01 +0100, by Boris Feld
perf: prewarm the branchmap in perfbranchmapload
Fri, 23 Nov 2018 02:11:11 +0100, by Boris Feld
localrepo: correct docstring of filectx()
Sun, 25 Nov 2018 22:39:54 +0900, by Yuya Nishihara
annotate: remove dead code to not convert path to relative path
Sat, 24 Nov 2018 20:05:55 +0900, by Yuya Nishihara
annotate: start pager soon after command options are validated
Sat, 24 Nov 2018 18:41:44 +0900, by Yuya Nishihara
annotate: check and update command options first
Sat, 24 Nov 2018 18:38:44 +0900, by Yuya Nishihara
annotate: format local tables in less-dense form
Sat, 24 Nov 2018 18:36:44 +0900, by Yuya Nishihara
perf: rename version flag of perfchangegroupchangelog to cgversion
Thu, 22 Nov 2018 18:14:21 +0300, by Pulkit Goyal
procutil: don't allow the main 'hg' script to be treated as the Windows exe
Fri, 23 Nov 2018 22:27:57 -0500, by Matt Harbison
remotefilelog: drop some compatibility cruft for finding the hg exeutable
Fri, 23 Nov 2018 22:18:56 -0500, by Matt Harbison
branchmap: build the revbranchcache._namesreverse() only when required
Wed, 21 Nov 2018 17:17:26 +0300, by Pulkit Goyal
sparse-revlog: put the native implementation of slicechunktodensity to use
Thu, 15 Nov 2018 11:11:38 +0100, by Boris Feld
cext: increment the `parsers` module version
Thu, 15 Nov 2018 11:10:52 +0100, by Boris Feld
sparse-revlog: introduce native (C) implementation of slicechunktodensity
Thu, 15 Nov 2018 11:09:58 +0100, by Boris Feld
sparse-revlog: add a `trim_endidx` function in C
Fri, 09 Nov 2018 18:45:23 +0100, by Boris Feld
sparse-revlog: add a `index_segment_span` function in C
Fri, 09 Nov 2018 18:43:16 +0100, by Boris Feld
sparse-revlog: add a `index_get_length` function in C
Fri, 09 Nov 2018 18:42:58 +0100, by Boris Feld
sparse-revlog: add a `index_get_start` function in C
Tue, 20 Nov 2018 14:49:18 +0000, by Boris Feld
perf: add --clear-revlog flag to branchmapload
Fri, 23 Nov 2018 06:32:32 +0100, by Boris Feld
perf: introduce a function to fully "unload" a changelog
Fri, 23 Nov 2018 06:32:28 +0100, by Boris Feld
perf: use an explicit function in perfbranchmapload
Fri, 23 Nov 2018 01:32:57 +0100, by Boris Feld
perf: update function name to match `perfbranchmapload` command
Fri, 23 Nov 2018 01:20:18 +0100, by Boris Feld
perf: fix a minor typo in perfbranchmapload
Wed, 21 Nov 2018 11:46:47 +0000, by Boris Feld
context: floor adjustlinkrev graph walk during copy tracing
Wed, 10 Oct 2018 00:50:37 +0200, by Boris Feld
context: small refactoring of `isintroducedafter`
Mon, 19 Nov 2018 14:30:58 +0000, by Boris Feld
context: split `introrev` logic in a sub function
Wed, 10 Oct 2018 00:50:36 +0200, by Boris Feld
context: introduce an `isintroducedafter` method and use it in copies
Wed, 10 Oct 2018 00:50:35 +0200, by Boris Feld
context: take advantage of `_descendantrev` in introrev if available
Wed, 10 Oct 2018 00:50:34 +0200, by Boris Feld
context: spell out the logic around linkrev adjustement starting point
Wed, 10 Oct 2018 00:49:30 +0200, by Boris Feld
perf: add a new `perfhelper-tracecopies` command
Mon, 19 Nov 2018 14:14:56 +0000, by Boris Feld
narrow: extract helper for parsing narrowspec file
Fri, 21 Sep 2018 09:19:42 -0700, by Martin von Zweigbergk
py3: cast attribute name to sysstr in clearcachedproperty()
Thu, 22 Nov 2018 22:40:22 +0900, by Yuya Nishihara
py3: whitelist three more passing test caught by buildbot
Wed, 21 Nov 2018 19:12:12 +0300, by Pulkit Goyal
tests: make test-check-module-imports more robust
Wed, 21 Nov 2018 13:08:23 -0500, by Valentin Gatien-Baron
push: add --publish flag to change phase of pushed changesets
Sat, 27 Oct 2018 21:13:23 +0800, by Anton Shestakov
match: reformat `syntaxes` dictionary for better maintainability
Mon, 19 Nov 2018 17:19:54 +0000, by Boris Feld
match: provide and use a quick way to escape a single byte
Mon, 19 Nov 2018 18:54:44 +0000, by Boris Feld
perf: make `clearfilecache` helper work with any object
Mon, 19 Nov 2018 16:50:21 +0000, by Boris Feld
perf: move some of the perftags benchmark to the setup function
Tue, 20 Nov 2018 10:10:25 +0000, by Boris Feld
perf: use the new setup function in "perfbookmarks"
Mon, 19 Nov 2018 23:14:46 +0000, by Boris Feld
perf: add a `setup` argument to run code outside of the timed section
Mon, 19 Nov 2018 22:55:07 +0000, by Boris Feld
perf: explicitly pass title as a keyword argument in `perfdiffwd`
Mon, 19 Nov 2018 23:02:29 +0000, by Boris Feld
ui: unify argument name of ui.log()
Sun, 11 Nov 2018 17:59:23 +0900, by Yuya Nishihara
logtoprocess: extract logger class from ui wrapper
Sun, 11 Nov 2018 17:45:18 +0900, by Yuya Nishihara
merge with stable
Wed, 21 Nov 2018 21:40:16 +0900, by Yuya Nishihara
py3: use node.hex(m.digest()) instead of m.hexdigest()
Mon, 19 Nov 2018 21:12:13 +0300, by Pulkit Goyal
tests: stabilize the recent checkexec changes on Windows stable
Tue, 20 Nov 2018 18:47:19 -0500, by Matt Harbison
tests: add Balto configuration file
Sun, 18 Nov 2018 02:40:47 +0100, by Boris Feld
tests: make test-alias.t pass with re2
Mon, 19 Nov 2018 13:40:03 -0500, by Valentin Gatien-Baron
context: remove seemingly impossible code branch
Mon, 19 Nov 2018 23:08:09 -0800, by Martin von Zweigbergk
checkexec: create destination directory if necessary stable
Thu, 15 Nov 2018 03:09:23 +0100, by Boris Feld
py3: use pycompat.byteskwargs() to covert keys of kwargs to bytes
Mon, 19 Nov 2018 21:11:08 +0300, by Pulkit Goyal
py3: use '%d' for integers instead of '%s'
Mon, 19 Nov 2018 20:30:07 +0300, by Pulkit Goyal
py3: add 9 new passing tests caught by buildbot
Mon, 19 Nov 2018 19:57:11 +0300, by Pulkit Goyal
branch: allow changing branch of merge commits with --rev
Fri, 09 Nov 2018 13:57:13 +0800, by Anton Shestakov
lfs: ensure that the return of urlopener.open() is closed
Thu, 15 Nov 2018 22:28:38 -0500, by Matt Harbison
changegroup: avoid instantiating storage if we are not using it
Thu, 15 Nov 2018 11:16:42 -0800, by Kyle Lippincott
http: allow 'auth.prefix' to have a username consistent with the URI
Fri, 16 Nov 2018 17:56:36 -0500, by Matt Harbison
lfs: make the exception messages consistent
Thu, 15 Nov 2018 18:14:57 -0500, by Matt Harbison
lfs: handle URLErrors to add additional information
Thu, 15 Nov 2018 18:08:29 -0500, by Matt Harbison
lfs: improve the hints for common errors in the Batch API
Thu, 15 Nov 2018 17:58:59 -0500, by Matt Harbison
lfs: provide more Batch API error info via a hint in the raised exception
Thu, 15 Nov 2018 17:55:01 -0500, by Matt Harbison
scmutil: display the optional hint when handling StorageError in catchall()
Thu, 15 Nov 2018 17:50:14 -0500, by Matt Harbison
sparse-revlog: align endrevidx usages in the _slicechunktosize
Thu, 15 Nov 2018 14:57:26 +0100, by Boris Feld
graft: do not try to skip rev derived from ancestor more than once (issue6024) stable
Thu, 15 Nov 2018 22:59:38 +0900, by Yuya Nishihara
subrepo: print the status line before creating the peer for better diagnostics stable
Fri, 16 Nov 2018 18:37:26 -0500, by Matt Harbison
sparse-revlog: use `span` variable as intended
Thu, 15 Nov 2018 14:55:11 +0100, by Boris Feld
tests: stabilize test-commandserver.t on Windows
Thu, 15 Nov 2018 17:38:51 -0500, by Matt Harbison
histedit: conditionalize the imports of 'fcntl' and 'termios'
Thu, 15 Nov 2018 17:36:15 -0500, by Matt Harbison
logtoprocess: update commandfinish options arguments
Fri, 16 Nov 2018 14:21:47 +0100, by Boris Feld
rebase: fix two ui.logs to actually have text when using default blackbox log
Thu, 15 Nov 2018 13:16:46 -0800, by Kyle Lippincott
wireprotov2server: let repo.narrowmatch(match) do matcher intersection
Thu, 15 Nov 2018 11:22:32 -0800, by Martin von Zweigbergk
blackbox: extract function to test if log event is tracked
Sun, 11 Nov 2018 17:29:46 +0900, by Yuya Nishihara
blackbox: initialize inlog flag properly
Sun, 11 Nov 2018 17:25:34 +0900, by Yuya Nishihara
blackbox: initialize repo attribute properly
Sun, 11 Nov 2018 17:24:28 +0900, by Yuya Nishihara
blackbox: unindent "if True" block
Sun, 11 Nov 2018 17:22:14 +0900, by Yuya Nishihara
blackbox: extract logger class from ui wrapper
Sun, 11 Nov 2018 17:17:49 +0900, by Yuya Nishihara
blackbox: rename variables to prepare extracting core logic from ui wrapper
Sun, 11 Nov 2018 16:58:22 +0900, by Yuya Nishihara
sparse-revlog: rework the way we enforce chunk size limit
Fri, 09 Nov 2018 17:58:37 +0100, by Boris Feld
doctest: add a `issnapshot` method to _testrevlog
Tue, 13 Nov 2018 15:06:29 +0100, by Boris Feld
tests: add `revlogutils.deltas` module to doctests
Tue, 13 Nov 2018 14:41:04 +0100, by Boris Feld
merge with stable
Thu, 15 Nov 2018 20:20:31 +0900, by Yuya Nishihara
mergetools: adjust Beyond Compare config on Mac/Linux
Mon, 05 Nov 2018 22:58:19 +0100, by joco
tests: allow for 100% of profiled time in sleep in test-profile.t stable
Wed, 14 Nov 2018 11:52:13 -0500, by Augie Fackler
rewriteutil: move publicrevs closer to where it's used
Wed, 14 Nov 2018 15:05:38 +0800, by Anton Shestakov
requires: use atomictemp=True when writing .hg/requires
Wed, 14 Nov 2018 11:30:46 -0800, by Martin von Zweigbergk
blackbox: extract _log() function which is called after lastui is resolved
Sun, 11 Nov 2018 16:47:28 +0900, by Yuya Nishihara
blackbox: inline temporary variables which are referenced only once
Sun, 11 Nov 2018 16:44:30 +0900, by Yuya Nishihara
blackbox: simply update global lastui variable at once
Sun, 11 Nov 2018 16:43:29 +0900, by Yuya Nishihara
blackbox: consolidate conditions for early return
Sun, 11 Nov 2018 16:38:43 +0900, by Yuya Nishihara
blackbox: remove redundant check for unassigned repo
Sun, 11 Nov 2018 16:34:49 +0900, by Yuya Nishihara
tests: fix bytes/str issue I introduced when adding this test
Wed, 14 Nov 2018 10:15:28 -0500, by Augie Fackler
shelve: use matcher to restrict prefetch to just the modified files
Tue, 13 Nov 2018 17:14:47 -0800, by Kyle Lippincott
revlog: automatically read from opened file handles
Tue, 13 Nov 2018 12:32:05 -0800, by Gregory Szorc
revlog: detect incomplete revlog reads
Tue, 13 Nov 2018 12:30:59 -0800, by Gregory Szorc
revlog: use single file handle when de-inlining revlog
Tue, 30 Oct 2018 16:50:05 -0700, by Gregory Szorc
store: raise ProgrammingError if unable to decode a storage path
Tue, 13 Nov 2018 18:44:09 +0300, by Pulkit Goyal
tests: document a known failing interaction between narrow and lfs
Tue, 13 Nov 2018 23:54:23 -0500, by Matt Harbison
logtoprocess: drop support for ui.log() call with invalid msg arguments (BC)
Sun, 11 Nov 2018 12:55:58 +0900, by Yuya Nishihara
py3: byte-stringify inline extension in test-logtoprocess.t
Sun, 11 Nov 2018 12:35:38 +0900, by Yuya Nishihara
logtoprocess: rewrite dict building in py3-compatible way
Sun, 11 Nov 2018 12:33:14 +0900, by Yuya Nishihara
logtoprocess: leverage procutil.shellenviron() to stringify variables (BC)
Sun, 11 Nov 2018 12:27:23 +0900, by Yuya Nishihara
templater: check invalid use of list expression properly (issue5920)
Tue, 13 Nov 2018 22:15:30 +0900, by Yuya Nishihara
copystore: provide unit to ui.makeprogress() stable
Wed, 14 Nov 2018 15:06:21 +0800, by Anton Shestakov
verify: provide unit to ui.makeprogress() stable
Wed, 14 Nov 2018 15:07:02 +0800, by Anton Shestakov
tests: fix wireproto redirection test on systems without tls1.2 stable
Tue, 13 Nov 2018 19:47:48 -0500, by Augie Fackler
py3: add b suffix to make sure file is opened in bytes mode
Tue, 13 Nov 2018 18:08:55 +0300, by Pulkit Goyal
py3: don't use dict.iterkeys()
Tue, 13 Nov 2018 18:08:17 +0300, by Pulkit Goyal
py3: use node.hex(h.digest()) instead of h.hexdigest()
Tue, 13 Nov 2018 18:07:21 +0300, by Pulkit Goyal
py3: make second argument of fdopen() a str
Tue, 13 Nov 2018 17:41:54 +0300, by Pulkit Goyal
py3: fix keyword arguments handling in hgext/remotefilelog/
Tue, 13 Nov 2018 17:41:26 +0300, by Pulkit Goyal
py3: add __pycache__ to .hgignore
Sat, 13 Oct 2018 05:09:18 +0300, by Pulkit Goyal
sparse-revlog: stop using a heap to track selected gap
Thu, 08 Nov 2018 16:07:16 +0100, by Boris Feld
sparse-revlog: stop using a heap to track gaps
Thu, 08 Nov 2018 16:01:30 +0100, by Boris Feld
sparse-revlog: fast-path before computing payload size
Thu, 08 Nov 2018 15:29:58 +0100, by Boris Feld
sparse-revlog: drop unused deltainfo parameter from segmentspan
Tue, 16 Oct 2018 14:46:28 +0200, by Boris Feld
sparse-revlog: drop unused deltainfo parameter from _slicechunktodensity
Tue, 16 Oct 2018 14:43:51 +0200, by Boris Feld
sparse-revlog: skip the span check in the sparse-revlog case
Mon, 15 Oct 2018 15:45:08 +0200, by Boris Feld
histedit: import chistedit curses UI from hg-experimental
Wed, 17 Oct 2018 17:15:42 -0400, by Augie Fackler
manifest: perform cheap checks before potentially allocating memory
Mon, 12 Nov 2018 20:32:58 -0500, by Augie Fackler
manifest: also reject obviously-too-short lines when parsing lines
Mon, 12 Nov 2018 20:31:57 -0500, by Augie Fackler
manifest: make sure there's a filename before bothering to look for newline
Mon, 12 Nov 2018 20:35:22 -0500, by Augie Fackler
revlog: replace PyInt_AS_LONG with a more portable helper function
Tue, 06 Nov 2018 11:12:56 -0500, by Augie Fackler
help: document weird behavior of uisetup()
Mon, 12 Nov 2018 22:51:36 +0900, by Yuya Nishihara
help: merge section about uisetup() and extsetup()
Mon, 12 Nov 2018 22:26:24 +0900, by Yuya Nishihara
help: add internals.extensions topic
Mon, 12 Nov 2018 21:28:54 +0900, by Yuya Nishihara
commandserver: send raw progress information to message channel
Sun, 04 Nov 2018 12:51:14 +0900, by Yuya Nishihara
commandserver: make getpass() request distinct from normal prompt
Sun, 04 Nov 2018 12:38:49 +0900, by Yuya Nishihara
commandserver: attach prompt default and choices to message
Sun, 04 Nov 2018 12:17:20 +0900, by Yuya Nishihara
test-commandserver: clean up quoting and location of dbgui extension
Thu, 08 Nov 2018 22:25:04 +0900, by Yuya Nishihara
ui: extract helpers to write message with type or label
Sun, 18 Jan 2015 17:55:28 +0900, by Yuya Nishihara
commandserver: add experimental option to use separate message channel
Sun, 18 Jan 2015 18:49:59 +0900, by Yuya Nishihara
commandserver: fix reference before assignment error in pipeservice cleanup
Wed, 07 Nov 2018 22:37:51 +0900, by Yuya Nishihara
dispatch: pass around ui.fmsg channel
Sun, 18 Jan 2015 18:43:23 +0900, by Yuya Nishihara
test-subrepo: document why share magically works even if subrepos are missing
Sat, 10 Nov 2018 12:01:21 +0900, by Yuya Nishihara
packaging: add Fedora 29 target
Sun, 11 Nov 2018 14:13:08 -0500, by Augie Fackler
store: pass in decoded filename to narrow matcher
Sat, 10 Nov 2018 11:52:32 +0900, by Yuya Nishihara
test-narrow-clone-stream: include no usefncache case which is broken
Sat, 10 Nov 2018 11:47:36 +0900, by Yuya Nishihara
test-narrow-clone-stream: include uppercase letter in filename
Sat, 10 Nov 2018 11:36:22 +0900, by Yuya Nishihara
phase: use the `phases.cmdphasenames` constant to walk available command flags
Sat, 10 Nov 2018 13:37:18 -0500, by Matt Harbison
phases: add a list of names usable by the phase command
Fri, 09 Nov 2018 23:19:53 -0500, by Matt Harbison
transaction: display data about why the transaction failed to rollback
Wed, 07 Nov 2018 19:59:38 +0100, by Boris Feld
merge with stable
Sat, 10 Nov 2018 12:07:26 +0900, by Yuya Nishihara
remotefilelog: avoid accessing repo instance after dispatch
Fri, 09 Nov 2018 10:47:24 -0800, by Martin von Zweigbergk
share: avoid a now-unnecessary reload of the repo
Fri, 09 Nov 2018 11:28:05 -0800, by Martin von Zweigbergk
share: reload repo after adjusting it in postshare()
Fri, 09 Nov 2018 10:46:02 -0800, by Martin von Zweigbergk
tests: don't load strip extension via mq extension for remotefilelog tests
Fri, 09 Nov 2018 09:36:16 -0800, by Martin von Zweigbergk
remotefilelog: remove unused configs for {data,history}pack version
Fri, 09 Nov 2018 09:35:05 -0800, by Martin von Zweigbergk
tests: remove obsolete PYTHONPATH override from remotefilelog tests
Fri, 09 Nov 2018 09:27:37 -0800, by Martin von Zweigbergk
tests: drop obsolete "hginit" alias in remotefilelog tests
Fri, 09 Nov 2018 08:19:08 -0800, by Martin von Zweigbergk
fix: add extra field to fixed revisions to avoid creating obsolescence cycles
Thu, 08 Nov 2018 12:35:26 -0800, by Danny Hooper
cleanup: use revision numbers instead of hashes in test output
Thu, 08 Nov 2018 12:29:56 -0800, by Danny Hooper
tests: make the commands.resolve.confirm tests not pollute the test-wide hgrc
Wed, 07 Nov 2018 15:42:56 -0800, by Kyle Lippincott
tests: fix a couple typos in test-resolve.t comments and add a comment
Wed, 07 Nov 2018 15:41:18 -0800, by Kyle Lippincott
fix: add suboption for configuring execution order of tools
Tue, 06 Nov 2018 15:50:41 -0800, by Danny Hooper
tests: fix up some import statements caught by Python 3
Wed, 07 Nov 2018 14:21:39 -0500, by Augie Fackler
tests: replace `tac` reimplementation by `sort -r`
Wed, 07 Nov 2018 10:29:38 -0800, by Martin von Zweigbergk
tests: work around `tac` not being portable
Wed, 07 Nov 2018 12:15:36 -0500, by Augie Fackler
revlog: give formatting to clang-format
Tue, 06 Nov 2018 11:22:16 -0500, by Augie Fackler
revlog: add blank line in comment to help clang-format
Tue, 06 Nov 2018 11:19:35 -0500, by Augie Fackler
revlog: add a comment to help clang-format produce less-awful results
Tue, 06 Nov 2018 11:18:12 -0500, by Augie Fackler
py3: ratchet caught two more passing tests
Tue, 06 Nov 2018 11:52:41 -0500, by Augie Fackler
perf: add a lazydeltabase option to perfrevlogwrite
Mon, 05 Nov 2018 15:57:31 +0100, by Boris Feld
perf: add `storage` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:24:09 +0100, by Boris Feld
perf: add `parent-smallest` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:19:44 +0100, by Boris Feld
perf: add `parent-2` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:15:18 +0100, by Boris Feld
perf: add `parent-1` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:15:02 +0100, by Boris Feld
perf: add the notion of "source" to perfrevlogwrite
Fri, 19 Oct 2018 17:23:29 +0200, by Boris Feld
perf: only display the total time for perfrevlogwrite if quiet
Tue, 06 Nov 2018 00:57:34 +0100, by Boris Feld
perf: offer full details in perfrevlogwrite
Wed, 03 Oct 2018 11:04:57 +0200, by Boris Feld
perf: introduce a perfrevlogwrite command
Wed, 03 Oct 2018 10:53:29 +0200, by Boris Feld
tests: fix config knob in test-narrow-clone-stream.t
Tue, 06 Nov 2018 10:41:00 -0500, by Augie Fackler
remotefilelog: fix various whitespace issues in docstring
Tue, 06 Nov 2018 10:26:33 -0500, by Augie Fackler
ui: add config knob to redirect status messages to stderr (API)
Sat, 03 Nov 2018 19:42:50 +0900, by Yuya Nishihara
phabricator: ensure the command summaries are available in extension help stable
Sat, 10 Nov 2018 22:25:12 -0500, by Matt Harbison
hgweb: cast bytearray to bytes stable
Fri, 09 Nov 2018 23:49:39 +0000, by Gregory Szorc
help: unjumble the list of default config values for `internals.config` stable
Thu, 08 Nov 2018 20:04:07 -0500, by Matt Harbison
ui: hide fin/fout/ferr attributes behind @property functions
Sat, 03 Nov 2018 20:53:31 +0900, by Yuya Nishihara
ui: label prompt and echo messages
Sun, 18 Jan 2015 17:42:53 +0900, by Yuya Nishihara
ui: add inner function to select write destination
Sat, 03 Nov 2018 18:17:30 +0900, by Yuya Nishihara
ui: remove _write() and _write_err() functions
Sat, 03 Nov 2018 18:04:22 +0900, by Yuya Nishihara
ui: move pre/post processes from low-level write()s to _writenobuf()
Sat, 03 Nov 2018 18:03:09 +0900, by Yuya Nishihara
ui: pass in file object to _writenobuf()
Sat, 03 Nov 2018 17:56:17 +0900, by Yuya Nishihara
perf: fix perfrevlogrevisions --reverse
Mon, 05 Nov 2018 17:24:39 +0100, by Boris Feld
procutil: import concerns about creationflags on Windows from D1701
Tue, 06 Nov 2018 11:54:15 +0100, by Boris Feld
localrepo: extract loading of hgrc files to standalone function
Mon, 05 Nov 2018 14:14:32 -0800, by Gregory Szorc
revsets: make bookmark/named('re:nonexistent') not abort (issue6018) (BC)
Mon, 05 Nov 2018 09:09:48 -0800, by Martin von Zweigbergk
fix: rename :fileset subconfig to :pattern
Mon, 05 Nov 2018 16:05:45 -0800, by Danny Hooper
fix: add a config to abort when a fixer tool fails
Wed, 31 Oct 2018 13:11:51 -0700, by Danny Hooper
perf: measure slicing time in perfrevlogrevision
Tue, 06 Nov 2018 11:05:13 +0100, by Boris Feld
perf: teach perfrevlogrevision about sparse reading
Tue, 06 Nov 2018 11:04:23 +0100, by Boris Feld
perf: use the same timer for all section of perfrevlogrevision
Tue, 06 Nov 2018 11:13:31 +0100, by Boris Feld
obsutil: clarify the access to "repo"
Tue, 22 May 2018 15:26:17 +0200, by Boris Feld
pycompat: adding Linux detection and fixing Mac
Mon, 05 Nov 2018 19:52:42 -0800, by rdamazio
remotefilelog: fix various minor py3 problems
Mon, 05 Nov 2018 17:48:23 -0500, by Augie Fackler
remotefilelog: rip out a missed mention of lz4
Mon, 05 Nov 2018 17:37:37 -0500, by Augie Fackler
ui: wrap whole _write() block with timeblockedsection
Sat, 03 Nov 2018 17:47:23 +0900, by Yuya Nishihara
ui: indent _writenobuf() to prepare moving bits from _write() functions
Sat, 03 Nov 2018 17:43:57 +0900, by Yuya Nishihara
ui: simply concatenate messages before applying color labels
Sat, 03 Nov 2018 17:42:05 +0900, by Yuya Nishihara
ui: simplify interface of low-level write() functions
Sat, 03 Nov 2018 17:36:10 +0900, by Yuya Nishihara
ui: factor out function that writes data to fout/ferr with labeling
Sat, 03 Nov 2018 17:32:35 +0900, by Yuya Nishihara
ui: consolidate places where _progclear() is called
Sat, 03 Nov 2018 16:04:16 +0900, by Yuya Nishihara
templater: compute revset lazily
Sun, 04 Nov 2018 20:44:26 +0900, by Yuya Nishihara
remotefilelog: drop compat code for "getbundle_shallow" wireprotocol command
Wed, 24 Oct 2018 18:48:43 +0300, by Pulkit Goyal
tests: remove lz4 as dependency while running tests
Wed, 24 Oct 2018 17:54:34 +0300, by Pulkit Goyal
remotefilelogserver: add a matcher argument to _walkstreamfiles()
Wed, 24 Oct 2018 17:51:49 +0300, by Pulkit Goyal
shallowutil: introduce a helper function isenabled()
Mon, 05 Nov 2018 11:52:10 -0800, by Pulkit Goyal
remotefilelog: remove some BC code related to streamclone
Wed, 24 Oct 2018 16:59:05 +0300, by Pulkit Goyal
remotefilelog: add some docstring
Wed, 17 Oct 2018 09:12:29 -0400, by Augie Fackler
remotefilelog: rename wireproto methods and remaining capabilities
Thu, 04 Oct 2018 10:03:10 -0400, by Augie Fackler
remotefilelog: consolidate and rename on-disk store requirement
Tue, 16 Oct 2018 17:02:48 -0400, by Augie Fackler
remotefilelog: consolidate and rename bundle2 capability
Tue, 16 Oct 2018 17:30:47 -0400, by Augie Fackler
remotefilelog: rename capability for legacy ssh file fetching method
Tue, 16 Oct 2018 16:38:40 -0400, by Augie Fackler
remotefilelog: rip out lz4 support
Thu, 04 Oct 2018 00:11:37 -0400, by Augie Fackler
remotefilelog: bump pack file formats to version 2
Wed, 03 Oct 2018 23:25:31 -0400, by Augie Fackler
remotefilelog: avoid hard-coding pack names in tests
Wed, 03 Oct 2018 23:47:43 -0400, by Augie Fackler
remotefilelog: remove now-unused wirepack code
Tue, 16 Oct 2018 14:04:41 -0400, by Augie Fackler
remotefilelogserver: remove pack-serving functionality
Tue, 16 Oct 2018 14:04:11 -0400, by Augie Fackler
remotefilelog: remove support for fetching packs
Tue, 16 Oct 2018 13:17:16 -0400, by Augie Fackler
remotefilelog: jettison example cache client
Wed, 03 Oct 2018 17:20:44 -0400, by Augie Fackler
remotefilelog: prune obsolete method
Wed, 03 Oct 2018 17:18:20 -0400, by Augie Fackler
logtoprocess: use new runbgcommand from procutil
Wed, 03 Oct 2018 14:01:22 -0400, by Augie Fackler
procutil: port over windows encoding fixes from logtoprocess
Tue, 16 Oct 2018 14:42:57 -0400, by Augie Fackler
remotefilelog: transplant runbgcommand to procutil
Wed, 03 Oct 2018 14:01:04 -0400, by Augie Fackler
remotefilelog: remove function that was described as deprecated
Wed, 03 Oct 2018 13:54:45 -0400, by Augie Fackler
remotefilelog: import pruned-down remotefilelog extension from hg-experimental
Thu, 27 Sep 2018 13:03:19 -0400, by Augie Fackler
store: introduce _matchtrackedpath() and use it to filter store files
Wed, 17 Oct 2018 17:42:32 +0300, by Pulkit Goyal
narrow: only send includepats and excludepats if they are not empty
Wed, 17 Oct 2018 17:24:55 +0300, by Pulkit Goyal
exchange: pass includepats and excludepats as arguments to getbundle()
Tue, 16 Oct 2018 17:53:26 +0300, by Pulkit Goyal
catapult: add a bit more documentation on how to use catapult tracing
Thu, 01 Nov 2018 16:51:21 -0700, by Kyle Lippincott
catapult: introduce HGTESTCATAPULTSERVERPIPE to control run-tests' tracing
Thu, 01 Nov 2018 16:44:02 -0700, by Kyle Lippincott
catapult: rename 'active' to 'activetrace'; this isn't storing a boolean state
Thu, 01 Nov 2018 16:44:37 -0700, by Kyle Lippincott
catapult: fix broken run-tests catapult tracing
Thu, 01 Nov 2018 16:44:32 -0700, by Kyle Lippincott
test: fix self._testdir to use the right mercurial library during testing
Sat, 03 Nov 2018 23:24:15 +0530, by Sangeet Kumar Mishra
tests: conditonalize a difference in test-merge-tools.t on Windows
Sat, 03 Nov 2018 20:50:04 -0400, by Matt Harbison
statprof: clean up unicode/bytes a little
Thu, 01 Nov 2018 17:12:22 -0400, by Augie Fackler
statprof: add a couple of asserts to avoid storing unicodes
Thu, 01 Nov 2018 17:11:31 -0400, by Augie Fackler
tests: add some helpful `|| cat` bits to test-profile.t
Thu, 01 Nov 2018 17:09:55 -0400, by Augie Fackler
tests: skip wireproto clientreactor tests on Python 3.6.0-3.6.3 inclusive
Thu, 01 Nov 2018 16:13:01 -0400, by Augie Fackler
contrib: tweak import-checker to always use bytes for module names
Thu, 01 Nov 2018 15:58:01 -0400, by Augie Fackler
contrib: fix import-checker to not b'' module names on Python 3
Thu, 01 Nov 2018 15:43:43 -0400, by Augie Fackler
tests: add a critical flush() to run-tests.py to make output stable on py3
Thu, 01 Nov 2018 15:47:26 -0400, by Augie Fackler
merge-tools: when calling external merge tool, describe the resolve inputs
Sat, 13 Oct 2018 07:49:20 -0700, by Kyle Lippincott
templatekw: deprecate p1rev/p2rev/p1node/p2node in favor of p1/p2
Fri, 26 Oct 2018 21:46:37 +0900, by Yuya Nishihara
templatekw: add p1/p2 keywords which switches the current ctx
Fri, 26 Oct 2018 21:43:20 +0900, by Yuya Nishihara
templater: add wrapper for a single template mapping
Fri, 19 Oct 2018 21:11:30 +0900, by Yuya Nishihara
templatekw: extract internal "{rev}:{node|formatnode}" template to constant
Fri, 26 Oct 2018 21:28:20 +0900, by Yuya Nishihara
tweakdefaults: remove commands.resolve.mark-check=abort, it is too broken stable
Mon, 05 Nov 2018 15:01:45 -0800, by Kyle Lippincott
resolve: when resolve.mark-check=abort, downgrade to warning if pats specified stable
Fri, 02 Nov 2018 11:57:45 -0700, by Kyle Lippincott
test: remove changes preparing the drop of `HGMERGE`
Thu, 01 Nov 2018 14:35:18 +0100, by Boris Feld
run-tests: define the default merge tool through configuration
Thu, 01 Nov 2018 14:29:21 +0100, by Boris Feld
run-tests: explicitly declare the list of dropped environment variable
Fri, 19 Oct 2018 01:52:16 +0200, by Boris Feld
test: drop usage of `HGMERGE` in `test-lfconvert.t`
Thu, 01 Nov 2018 14:29:14 +0100, by Boris Feld
test: drop usage of `HGMERGE` in `test-merge-types.t`
Thu, 01 Nov 2018 14:26:30 +0100, by Boris Feld
test: use the "correct" merge tool in `test-rebase-detach.t`
Thu, 01 Nov 2018 14:24:34 +0100, by Boris Feld
test: also deactivate `ui.merge` when testing merge tool
Wed, 31 Oct 2018 19:12:32 +0100, by Boris Feld
tests: adjust merge tool config in test-largefiles-update.t
Wed, 31 Oct 2018 18:43:56 +0100, by Boris Feld
extensions: include current version in "invalid version" message
Fri, 20 Apr 2018 18:08:54 +0200, by Boris Feld
obsolete: prefetch the repo.obsstore used in phasedivergence loop
Fri, 19 Oct 2018 01:07:08 +0200, by Boris Feld
obsutil: prefetch method in allpredecessors loop
Fri, 19 Oct 2018 00:53:18 +0200, by Boris Feld
merge with stable
Fri, 02 Nov 2018 14:24:29 -0400, by Augie Fackler
Added signature for changeset a91a2837150b stable
Fri, 02 Nov 2018 14:18:29 -0400, by Augie Fackler
Added tag 4.8 for changeset a91a2837150b stable
Fri, 02 Nov 2018 14:18:26 -0400, by Augie Fackler
beautifygraph: don't substitute anything for 'X' in rendered graphs
Sat, 13 Oct 2018 01:55:40 -0700, by Danny Hooper
py3: do not stringify integers in revlog stats by '%s'
Wed, 24 Oct 2018 21:29:04 +0900, by Yuya Nishihara
py3: convert revlog stats to a dict of (bytes, int) pairs
Wed, 24 Oct 2018 21:28:03 +0900, by Yuya Nishihara
rust: fix signature of rustlazyancestors_init() function stable 4.8
Sun, 28 Oct 2018 21:16:36 +0900, by Yuya Nishihara
tests: require SQLite 3.8.3+ as sqlitestore relies on "WITH" clause stable
Fri, 02 Nov 2018 21:25:35 +0900, by Yuya Nishihara
relnotes: various tweaks for release notes stable
Fri, 19 Oct 2018 22:09:53 +0800, by Anton Shestakov
delta: skip "empty delta" optimisation for non-general case (issue6006) stable
Thu, 01 Nov 2018 12:52:16 +0100, by Boris Feld
narrow: fix copies._fullcopytracing() narrowspec filtering in graft case stable
Thu, 01 Nov 2018 16:32:16 -0700, by Martin von Zweigbergk
tests: demonstrate broken copies._fullcopytracing() stable
Thu, 01 Nov 2018 16:28:11 -0700, by Martin von Zweigbergk
narrow: make copies.pathcopies() filter with narrowspec again stable
Thu, 01 Nov 2018 13:20:12 -0700, by Martin von Zweigbergk
tests: demonstrate broken copies.pathcopies() stable
Thu, 01 Nov 2018 11:24:45 -0700, by Martin von Zweigbergk
setup: explain to distutils how we write rc versions stable
Wed, 31 Oct 2018 20:32:42 +0100, by Paul Morelle
changegroup: restore default node ordering (issue6001) stable
Wed, 31 Oct 2018 12:08:37 -0700, by Boris Feld
changegroup: introduce an explicit linear sorting stable
Mon, 29 Oct 2018 17:26:25 +0100, by Boris Feld
py3: roll up threading.Thread constructor args into **kwargs
Thu, 25 Oct 2018 22:13:22 -0400, by Matt Harbison
tests: glob over a single quote vs double quote difference on Windows
Thu, 25 Oct 2018 21:04:47 -0400, by Matt Harbison
py3: port test-log-exthook.t to Python 3
Tue, 23 Oct 2018 11:31:33 -0400, by Augie Fackler
extensions: fix up many many debug logs that use %r
Fri, 12 Oct 2018 12:30:47 -0400, by Augie Fackler
blackbox: add configitem for format of log timestamps
Wed, 17 Oct 2018 15:48:01 -0700, by Matt DeVore
narrow: replace filtering in list comprehension by set operations
Tue, 23 Oct 2018 14:04:17 -0700, by Martin von Zweigbergk
storage: update sqlitestore to use the new `deltamode` parameter
Tue, 23 Oct 2018 19:20:22 +0200, by Boris Feld
narrow: rework logic to check whether we need to widen and narrow
Tue, 23 Oct 2018 16:24:04 +0300, by Pulkit Goyal
tests: show that adding an already included path still calls narrow_widen()
Tue, 23 Oct 2018 14:26:17 +0300, by Pulkit Goyal
graft: introduce --base option for using custom base revision while merging
Sun, 14 Oct 2018 17:08:18 +0200, by Mads Kiilerich
changegroup: add a option to create bundle with full snapshot only
Thu, 18 Oct 2018 12:31:06 +0200, by Boris Feld
changegroup: allow to force delta to be against p1
Wed, 10 Oct 2018 00:21:02 +0200, by Boris Feld
fix: disable use of thread-based worker stable
Wed, 31 Oct 2018 21:16:54 +0900, by Yuya Nishihara
storage: also use `deltamode argument` for ifiledata
Tue, 09 Oct 2018 23:26:35 +0200, by Boris Feld
configitems: rename the config to prevent adding an alias in future stable
Wed, 31 Oct 2018 15:27:06 +0300, by Pulkit Goyal
sparse-revlog: only refine delta candidates in the sparse case (issue6006) stable
Wed, 31 Oct 2018 11:02:08 +0100, by Boris Feld
changegroup: refactor emitrevision to use a `deltamode` argument
Tue, 09 Oct 2018 22:02:01 +0200, by Boris Feld
http: work around custom http client classes that refuse extra attrs stable
Mon, 29 Oct 2018 16:23:42 -0400, by Augie Fackler
branchmap: do not specify changelog as an argument
Tue, 23 Oct 2018 21:11:13 +0900, by Yuya Nishihara
filecache: unimplement __set__() and __delete__() (API)
Sat, 20 Oct 2018 17:56:00 +0900, by Yuya Nishihara
filecache: use try-except for faster __dict__ lookup
Sat, 20 Oct 2018 19:13:05 +0900, by Yuya Nishihara
crecord: make nextsametype() check that parent item exists (issue6009) stable
Thu, 25 Oct 2018 21:33:43 +0800, by Anton Shestakov
help: describe what ui.tweakdefaults changes, concretely stable
Wed, 24 Oct 2018 10:05:13 -0400, by Valentin Gatien-Baron
logexchange: convert paths to unix when detecting the active path stable
Thu, 25 Oct 2018 00:22:42 -0400, by Matt Harbison
help: update the default value specified for `profiling.time-track` stable
Wed, 24 Oct 2018 22:40:48 -0400, by Matt Harbison
profiling: revert the default mode back to 'cpu' on Windows stable
Wed, 24 Oct 2018 22:24:10 -0400, by Matt Harbison
phase: add an archived phase stable
Wed, 17 Oct 2018 14:47:01 +0200, by Boris Feld
exewrapper: apply clang-format to silence test-check-clang-format.t stable
Tue, 23 Oct 2018 20:46:21 +0900, by Yuya Nishihara
help: displaying extension commands by default
Thu, 18 Oct 2018 19:57:30 -0700, by rdamazio
help: displaying documented aliases by default
Thu, 18 Oct 2018 19:57:05 -0700, by rdamazio
help: allow hiding of help topics
Sat, 13 Oct 2018 05:43:39 -0700, by rdamazio
help: allow commands to be hidden
Sat, 13 Oct 2018 05:02:55 -0700, by rdamazio
py3: add one more passing test to whitelist
Sat, 20 Oct 2018 00:12:20 +0300, by Pulkit Goyal
py3: make sure we pass sysstr in sqlite3.connect()
Sat, 20 Oct 2018 00:05:50 +0300, by Pulkit Goyal
archive: use manifest.matches() to simplify and speed up matching
Tue, 05 Sep 2017 15:24:25 -0700, by Martin von Zweigbergk
archive: create alwaysmatcher when no matcher provided
Tue, 05 Sep 2017 15:24:22 -0700, by Martin von Zweigbergk
archive: change "matcnfn" argument to a real matcher
Tue, 05 Sep 2017 15:21:21 -0700, by Martin von Zweigbergk
Added signature for changeset 956ec6f1320d stable
Mon, 22 Oct 2018 14:48:14 -0400, by Augie Fackler
Added tag 4.8rc0 for changeset 956ec6f1320d stable
Mon, 22 Oct 2018 14:48:11 -0400, by Augie Fackler
merge to stable for 4.8 release freeze stable 4.8rc0
Mon, 22 Oct 2018 14:46:06 -0400, by Augie Fackler
shortest: never emit 0-length prefix even if unique
Mon, 22 Oct 2018 11:34:35 -0700, by Martin von Zweigbergk
logtoprocess: sends the canonical command name to the subprocess
Mon, 22 Oct 2018 15:51:01 +0200, by Boris Feld
logtoprocess: fix message formatting
Mon, 22 Oct 2018 15:47:30 +0200, by Boris Feld
profiling: move default mode to "real" time
Sat, 18 Aug 2018 01:44:38 +0200, by Boris Feld
streamclone: abort when client needs to handle obsmarkers, but doesn't
Fri, 05 Oct 2018 23:40:12 +0800, by Anton Shestakov
streamclone: include obsstore file into stream bundle if client can read it
Fri, 05 Oct 2018 23:27:17 +0800, by Anton Shestakov
setup: build exewrapper with Unicode support on py3
Fri, 19 Oct 2018 18:34:42 -0400, by Matt Harbison
exewrapper: convert to _tcsxxx functions for Unicode compatability
Fri, 19 Oct 2018 18:32:13 -0400, by Matt Harbison
exewrapper: drop an unused variable
Fri, 19 Oct 2018 18:23:14 -0400, by Matt Harbison
commands: restore compatibility for "^cmd" registration (issue6005)
Thu, 18 Oct 2018 21:14:22 +0900, by Yuya Nishihara
exchangev2: support fetching shallow files history
Fri, 19 Oct 2018 12:30:49 +0200, by Gregory Szorc
sqlitestore: support for storing revisions without their parents
Wed, 17 Oct 2018 17:32:15 +0200, by Gregory Szorc
wireprotov2: support exposing linknode of file revisions
Fri, 19 Oct 2018 15:38:25 +0200, by Gregory Szorc
localrepo: support marking repos as having shallow file storage
Fri, 19 Oct 2018 14:59:03 +0200, by Gregory Szorc
repository: teach addgroup() to receive data with missing parents
Wed, 26 Sep 2018 14:41:15 -0700, by Gregory Szorc
commands: support passing depth to hg.clone()
Fri, 19 Oct 2018 13:44:25 +0200, by Gregory Szorc
filelog: add a hasnode() method (API)
Wed, 03 Oct 2018 14:57:29 -0700, by Gregory Szorc
lfs: consult the narrow matcher when extracting pointers from ctx (issue5794)
Sun, 21 Oct 2018 22:26:00 -0400, by Matt Harbison
statprof: fix overflow while skipping boilerplate parts
Sat, 20 Oct 2018 20:25:56 +0900, by Yuya Nishihara
statprof: fix indent level of fp.write() (issue6004)
Sat, 20 Oct 2018 20:15:48 +0900, by Yuya Nishihara
py3: stringify setupversion on Windows
Fri, 19 Oct 2018 22:31:47 -0400, by Matt Harbison
tests: add coverage for some untested areas of hgweb
Fri, 19 Oct 2018 23:47:38 -0400, by Matt Harbison
statprof: update the name as the i increases (issue6003)
Fri, 19 Oct 2018 23:30:56 +0300, by Pulkit Goyal
test: show more profile lines in test-profile.t
Fri, 19 Oct 2018 23:18:29 +0300, by Pulkit Goyal
keepalive: use getattr to avoid AttributeErrors when vcr is in use
Fri, 19 Oct 2018 11:45:51 -0400, by Augie Fackler
phabricator: do more of the VCR work in demandimport.deactivated()
Fri, 19 Oct 2018 11:45:25 -0400, by Augie Fackler
tests: sleep longer in test-logtoprocess.t
Fri, 19 Oct 2018 11:28:29 -0400, by Augie Fackler
tests: fix pyflakes warning in test-duplicateoptions.py
Fri, 19 Oct 2018 11:31:18 -0400, by Augie Fackler
branchmap: avoid changelog and attribute lookups in replacecache()
Fri, 19 Oct 2018 16:34:45 +0200, by Gregory Szorc
branchmap: pass changelog into branchmap functions
Fri, 19 Oct 2018 16:16:17 +0200, by Gregory Szorc
fuzz: move many initialization steps into LLVMFuzzerInitialize
Thu, 18 Oct 2018 16:36:10 -0400, by Augie Fackler
bundle2: fix broken compression engine assertion
Thu, 17 Nov 2016 15:51:33 -0800, by Martin von Zweigbergk
tests: glob over a difference between Windows 7 and Window 10
Thu, 18 Oct 2018 17:54:07 -0400, by Matt Harbison
py3: fix module imports in test-highlight.t
Thu, 18 Oct 2018 18:11:16 -0400, by Matt Harbison
py3: fix module imports in tests, as flagged by test-check-module-imports.t
Wed, 17 Oct 2018 23:33:43 -0400, by Matt Harbison
lfs: don't add extension to hgrc after conversion (BC)
Thu, 18 Oct 2018 21:55:47 -0400, by Matt Harbison
addremove: add "ui." prefix to message color keys
Thu, 18 Oct 2018 21:00:07 +0900, by Yuya Nishihara
update: clarify update() call sites by specifying argument names
Thu, 09 Feb 2017 09:17:40 -0800, by Martin von Zweigbergk
debugcommands: avoid stack trace from debugindexstats in pure mode
Thu, 18 Oct 2018 10:11:08 -0700, by Martin von Zweigbergk
tests: fix up pure case of test-sqlitestore.t
Thu, 18 Oct 2018 11:24:20 -0400, by Augie Fackler
tests: don't emit false failures when sqlite3 is missing
Thu, 18 Oct 2018 11:14:04 -0400, by Augie Fackler
py3: get around IOError variants in test-commandserver.t
Tue, 16 Oct 2018 08:48:23 +0200, by Yuya Nishihara
py3: don't use traceback.print_exc() in commandserver.py
Tue, 16 Oct 2018 08:41:58 +0200, by Yuya Nishihara
py3: invalidate repository cache with system-string keys
Tue, 16 Oct 2018 08:29:24 +0200, by Yuya Nishihara
py3: system-stringify file mode in commandserver.py
Tue, 16 Oct 2018 08:20:03 +0200, by Yuya Nishihara
py3: alias next to __next__ in commandserver.py
Tue, 16 Oct 2018 07:57:40 +0200, by Yuya Nishihara
py3: system-stringify list of attributes to be forwarded from commandserver.py
Tue, 16 Oct 2018 07:57:05 +0200, by Yuya Nishihara
py3: import StringIO from test utility to test-commandserver.t
Tue, 16 Oct 2018 07:52:56 +0200, by Yuya Nishihara
py3: use bprint() helper in test-commandserver.t
Tue, 16 Oct 2018 07:38:31 +0200, by Yuya Nishihara
py3: byte-stringify most literals in test-commandserver.t
Tue, 16 Oct 2018 07:35:29 +0200, by Yuya Nishihara
localrepo: ensure we properly %-format int in exception throw
Sun, 14 Oct 2018 09:50:21 -0400, by Augie Fackler
py3: add a r'' prefix in mercurial/exchange.py
Thu, 18 Oct 2018 14:41:14 +0300, by Pulkit Goyal
py3: add 5 new passing tests to whitelist caught by buildbot
Thu, 18 Oct 2018 14:37:38 +0300, by Pulkit Goyal
py3: fix test-import-context.t
Wed, 17 Oct 2018 21:54:49 -0400, by Matt Harbison
py3: restore perfstartup() prior to b456b2e0ad9f on Windows
Mon, 15 Oct 2018 22:02:10 -0400, by Matt Harbison
help: document the server capabilities added by the LFS extension
Wed, 17 Oct 2018 21:05:43 -0400, by Matt Harbison
py3: fix test-propertycache.py on Windows
Thu, 27 Sep 2018 21:54:13 -0400, by Matt Harbison
commands: adjust metavariables as appropriate
Wed, 17 Oct 2018 21:00:36 +0800, by Anton Shestakov
match: fix up a repr to not crash on Python 3
Sun, 14 Oct 2018 11:16:22 -0400, by Augie Fackler
narrow: when widening, don't include manifests the client already has
Fri, 05 Oct 2018 11:07:34 -0700, by Martin von Zweigbergk
tests: add test for widening from an empty clone
Wed, 17 Oct 2018 09:30:07 -0700, by Martin von Zweigbergk
subrepo: access status members by name instead of by position
Wed, 17 Oct 2018 11:43:39 -0700, by Martin von Zweigbergk
revisions: when using prefixhexnode, ensure we prefix "0"
Tue, 16 Oct 2018 07:21:00 -0700, by Kyle Lippincott
store: pass matcher to store.datafiles()
Wed, 03 Oct 2018 16:45:24 +0300, by Pulkit Goyal
streamclone: pass narrowing related info in _walkstreamfiles()
Wed, 03 Oct 2018 17:59:05 +0300, by Pulkit Goyal
streamclone: new server config and some API changes for narrow stream clones
Wed, 26 Sep 2018 17:20:04 +0300, by Pulkit Goyal
narrow: only send the narrowspecs back if ACL in play
Wed, 10 Oct 2018 17:36:59 +0300, by Pulkit Goyal
zsh_completion: add -l/--list flag for hg bookmarks completion
Wed, 17 Oct 2018 22:32:50 +0800, by Anton Shestakov
zsh_completion: fix a couple of flags still not being perfect
Wed, 17 Oct 2018 22:31:34 +0800, by Anton Shestakov
zsh_completion: use $_hg_remote_opts after it is defined
Wed, 17 Oct 2018 22:27:10 +0800, by Anton Shestakov
tests: fix "running x tests using y ... " output in a few more places
Wed, 17 Oct 2018 11:56:03 -0700, by Martin von Zweigbergk
py3: fix test-hardlinks.t
Sun, 14 Oct 2018 09:34:21 +0000, by Mark Thomas
exchange: support declaring pull depth
Fri, 14 Sep 2018 14:56:13 -0700, by Gregory Szorc
exchangev2: support for calling rawstorefiledata to retrieve raw files
Wed, 17 Oct 2018 10:10:05 +0200, by Gregory Szorc
wireprotov2: implement command for retrieving raw store files
Tue, 16 Oct 2018 21:31:21 +0200, by Gregory Szorc
wireprotov2: add response type that serializes to indefinite length bytestring
Tue, 16 Oct 2018 21:35:33 +0200, by Gregory Szorc
exchangev2: recognize narrow patterns when pulling
Wed, 26 Sep 2018 14:38:43 -0700, by Gregory Szorc
sqlitestore: file storage backend using SQLite
Tue, 09 Oct 2018 08:50:13 -0700, by Gregory Szorc
storageutil: extract most of peek_censored from revlog
Tue, 16 Oct 2018 15:36:19 +0200, by Gregory Szorc
lfs: autoload the extension when cloning from repo with lfs enabled
Thu, 20 Sep 2018 17:27:01 -0700, by Matt Harbison
testing: switch to inserting deltas
Tue, 16 Oct 2018 16:24:46 +0200, by Gregory Szorc
testing: remove expectation of error on bad node insert
Tue, 16 Oct 2018 15:24:06 +0200, by Gregory Szorc
storageutil: convert fileid to bytes to avoid cast to %s
Tue, 16 Oct 2018 17:45:39 +0200, by Gregory Szorc
tests: use byte literals in test-storage.py
Tue, 16 Oct 2018 17:48:28 +0200, by Gregory Szorc
py3: byte-stringify literals in test-keyword.t
Tue, 16 Oct 2018 07:19:38 +0200, by Yuya Nishihara
py3: flush std streams before/after running user code in heredoctest.py
Tue, 16 Oct 2018 07:18:30 +0200, by Yuya Nishihara
py3: rewrite StringIO fallback for Python 3
Tue, 16 Oct 2018 08:06:17 +0200, by Yuya Nishihara
py3: reinvent print() function for contrib/hgclient.py
Tue, 16 Oct 2018 07:04:07 +0200, by Yuya Nishihara
py3: work around unicode stdio streams in contrib/hgclient.py
Tue, 16 Oct 2018 07:08:12 +0200, by Yuya Nishihara
py3: convert string literals to bytes in contrib/hgclient.py
Tue, 16 Oct 2018 07:00:41 +0200, by Yuya Nishihara
merge with stable
Tue, 16 Oct 2018 08:16:11 -0400, by Augie Fackler
branchmap: remove redundant sort
Fri, 31 Aug 2018 19:58:41 +0100, by Martijn Pieters
revset: drop special case of 'revset(...)' function in analyze
Thu, 11 Oct 2018 03:15:04 +0200, by Boris Feld
revset: document the `revset(...)` syntax
Thu, 11 Oct 2018 03:13:53 +0200, by Boris Feld
check-commit: update test expectation per removal of "double empty line" rule
Tue, 16 Oct 2018 12:39:21 +0200, by Yuya Nishihara
style: drop requirement to only use single lines between top-level objects
Sun, 14 Oct 2018 15:40:16 +0200, by Martijn Pieters
py3: byteify extension in test-relink.t
Sun, 14 Oct 2018 13:05:53 -0400, by Matt Harbison
f: fix a Python 3 bytes/string issue
Sat, 13 Oct 2018 04:20:22 -0400, by Augie Fackler
tests: use regex instead of Python versions for archive hash changes
Sun, 14 Oct 2018 08:55:30 -0400, by Augie Fackler
notify: a ton of encoding dancing to deal with the email module
Sun, 14 Oct 2018 05:29:00 -0400, by Augie Fackler
tests: add missing b prefix in test-context-metadata.t
Sun, 14 Oct 2018 11:06:21 -0400, by Augie Fackler
context: raise runtime errors with sysstrs
Sun, 14 Oct 2018 11:05:41 -0400, by Augie Fackler
rust: rustfmt config for hg-direct-ffi
Mon, 15 Oct 2018 11:16:12 +0200, by Georges Racinet
rust: rustlazyancestors.__contains__
Mon, 08 Oct 2018 19:11:41 +0200, by Georges Racinet
help: fix a missing quote character in ui.tweakdefaults
Sun, 14 Oct 2018 01:39:22 -0400, by Matt Harbison
rust: hooking into Python code
Thu, 27 Sep 2018 16:55:44 +0200, by Georges Racinet
py3: fix test-propertycache.py
Sun, 14 Oct 2018 14:10:38 +0000, by Mark Thomas
py3: fix test-dirstate-race.t
Sun, 14 Oct 2018 14:02:32 +0000, by Mark Thomas
help: adding a proper declaration for shortlist/basic commands (API)
Fri, 12 Oct 2018 18:49:11 +0200, by Rodrigo Damazio
help: assigning topic categories
Fri, 12 Oct 2018 18:06:32 +0200, by Rodrigo Damazio
help: assigning categories to existing commands
Sat, 13 Oct 2018 02:17:41 -0700, by rdamazio

less more | rev 40772: (0) -30000 -10000 -3000 -1000 -480 +480 +1000 +3000 +10000 tip

Mercurial > hg

graph