Mercurial > hg
graph
-
rhg: make `rhg files` work if `ui.relative-files=true` is specifiedMon, 29 May 2023 16:53:18 +0100, by Arseniy Alekseyev
-
rhg: test `rhg files --config ui.relative-paths ...`Mon, 29 May 2023 16:47:39 +0100, by Arseniy Alekseyev
-
cleanup: simplify codeThu, 01 Jun 2023 12:05:32 +0100, by Arseniy Alekseyev
-
dirstate: better error messages when dirstate is corruptedWed, 31 May 2023 19:00:11 +0100, by Arseniy Alekseyev
-
rust: remove an unused error variant DirstateMapError::EmptyPathWed, 31 May 2023 18:18:52 +0100, by Arseniy Alekseyev
-
hg: move unreachable code to where it could be reachedThu, 20 Apr 2023 16:07:47 -0400, by Jason R. Coombs
-
stream-clone: support streamv3 on the cli [hg bundle]Tue, 23 May 2023 01:39:47 +0200, by Arseniy Alekseyev
-
stream-clone: add the `-exp` prefix to the bundle partTue, 23 May 2023 01:28:56 +0200, by Pierre-Yves David
-
zstd: hack include order to ensure that our zstd.h is foundMon, 21 Feb 2022 14:44:22 +0100, by Joerg Sonnenberger
-
exchange: allow passing no includes/excludes to `pull()`Thu, 18 May 2023 17:07:43 -0700, by Martin von Zweigbergk
-
stabletailgraph: add test cases challenging the open merge stackTue, 16 May 2023 12:31:07 +0200, by pacien
-
stabletailgraph: naive version of leap computationFri, 21 Apr 2023 14:33:33 +0200, by pacien
-
stabletailgraph: extract _parents util funcFri, 21 Apr 2023 16:19:32 +0200, by pacien
-
stabletailgraph: clarify excl part size computationMon, 22 May 2023 19:04:05 +0200, by pacien
-
stabletailgraph: clarify naiveness of current implementationFri, 21 Apr 2023 14:32:58 +0200, by pacien
-
stream-clone: introduce the notion of an experimental "v3" versionFri, 19 May 2023 14:49:50 +0200, by Pierre-Yves David
-
stream-clone: check is a compatible protocol can be foundSat, 20 May 2023 01:39:13 +0200, by Pierre-Yves David
-
stream-clone: bail-out earlier if stream clone is not requestedSat, 20 May 2023 01:22:49 +0200, by Pierre-Yves David
-
stream-clone: bail-out earlier if pull is partialSat, 20 May 2023 01:19:26 +0200, by Pierre-Yves David
-
stream-clone: bail-out earlier if destination repo is not emptySat, 20 May 2023 01:17:27 +0200, by Pierre-Yves David
-
stream-clone: check the version of streaming clone supported by the clientSun, 21 May 2023 00:00:57 +0200, by Arseniy Alekseyev
-
stream-clone: make sure the `stream` capability is set when bundlingSun, 21 May 2023 01:03:19 +0200, by Pierre-Yves David
-
stream-clone: upgrade the error message for bad stream requestSun, 21 May 2023 00:00:29 +0200, by Arseniy Alekseyev
-
stream-clone: yield cache entry in `_entries_walk` tooSun, 21 May 2023 03:21:00 +0200, by Pierre-Yves David
-
stream-clone: introduce a _entries_walkSun, 21 May 2023 03:10:59 +0200, by Pierre-Yves David
-
store: make `walk` return an entry for obsolescence if requested soSun, 21 May 2023 02:29:33 +0200, by Pierre-Yves David
-
store: yield phases before changelogSun, 21 May 2023 02:16:24 +0200, by Pierre-Yves David
-
store: make `walk` return an entry for phase if requested soSun, 21 May 2023 02:15:04 +0200, by Pierre-Yves David
-
cli: add a test of `hg debugnodemap --manifest`Mon, 22 May 2023 10:20:24 +0100, by Arseniy Alekseyev
-
cli: fix spelling in `debugnodemap` error messagesThu, 18 May 2023 19:37:12 +0100, by Arseniy Alekseyev
-
cli: make debugnodemap capable of inspecting an arbitrary nodemapThu, 18 May 2023 18:45:54 +0100, by Arseniy Alekseyev
-
rust: mostly avoid streaming zstd decompressionThu, 18 May 2023 17:53:17 +0100, by Arseniy Alekseyev
-
rust: in zstd decompression, avoid a useless vec initializationThu, 18 May 2023 17:25:18 +0100, by Arseniy Alekseyev
-
rust: speed up zstd decompression by re-using the decompression contextThu, 18 May 2023 17:18:54 +0100, by Arseniy Alekseyev
-
store: rename `topfiles` to `top_entries`Tue, 16 May 2023 10:44:25 +0200, by Pierre-Yves David
-
store: rename `datafiles` to `data_entries`Tue, 16 May 2023 10:43:36 +0200, by Pierre-Yves David
-
store: use boolean property for upgrade's matchrevlogMon, 15 May 2023 22:03:39 +0200, by Pierre-Yves David
-
store: use the new boolean property in `upgrade`Mon, 15 May 2023 22:11:27 +0200, by Pierre-Yves David
-
store: use the new boolean property in `remotefilelogserver`Mon, 15 May 2023 22:11:02 +0200, by Pierre-Yves David
-
store: use the boolean property in `repair_issue6528`Mon, 15 May 2023 22:10:33 +0200, by Pierre-Yves David
-
store: use the new boolean property in `narrow`Mon, 15 May 2023 22:10:04 +0200, by Pierre-Yves David
-
store: use the boolean property in `store`Mon, 15 May 2023 22:09:43 +0200, by Pierre-Yves David
-
store: introduce boolean property for revlog typeMon, 15 May 2023 22:09:15 +0200, by Pierre-Yves David
-
store: issue a single entry for each revlogMon, 15 May 2023 09:03:15 +0200, by Pierre-Yves David
-
store: rename `unencoded_path` to `entry_path` for StoreEntryMon, 15 May 2023 09:02:59 +0200, by Pierre-Yves David
-
store: do the revlog matching on entry directlyMon, 15 May 2023 09:02:43 +0200, by Pierre-Yves David
-
store: split the wrapping of encodedstore between _wrap and datafilesMon, 15 May 2023 09:02:26 +0200, by Pierre-Yves David
-
store: introduce a main_file_path method for revlogMon, 15 May 2023 09:02:09 +0200, by Pierre-Yves David
-
upgrade: actually use StoreEntry API to create revlogMon, 15 May 2023 09:01:53 +0200, by Pierre-Yves David
-
upgrade: use StoreEntry object in upgradeMon, 15 May 2023 09:01:36 +0200, by Pierre-Yves David
-
upgrade: drop a quick fix that is not longer necessaryMon, 15 May 2023 09:01:18 +0200, by Pierre-Yves David
-
store: use StoreEntry API instead of parsing filename in largefileMon, 15 May 2023 09:01:02 +0200, by Pierre-Yves David
-
store: use StoreEntry API instead of parsing filename when listing manifestlogMon, 15 May 2023 09:00:46 +0200, by Pierre-Yves David
-
store: use StoreEntry API instead of parsing filename when fixing issue6528Mon, 15 May 2023 09:00:28 +0200, by Pierre-Yves David
-
store: use StoreEntry API instead of parsing filename in remotefilelogMon, 15 May 2023 09:00:13 +0200, by Pierre-Yves David
-
store: use StoreEntry API instead of parsing filename in narrowMon, 15 May 2023 08:59:56 +0200, by Pierre-Yves David
-
store: add a `target_id` attribute on RevlogStoreEntryMon, 15 May 2023 08:59:38 +0200, by Pierre-Yves David
-
store: actually tag tree manifest revlogs as manifest revlogsMon, 15 May 2023 08:59:22 +0200, by Pierre-Yves David
-
store: also gather files per revlog in `topfiles`Mon, 15 May 2023 08:59:06 +0200, by Pierre-Yves David
-
store: also group files by revlog in fncache version of datafilesMon, 15 May 2023 08:58:49 +0200, by Pierre-Yves David