Mercurial: revision graph

graph

less more | rev 30486: (0) -30000 -10000 -3000 -1000 -240 +240 +1000 +3000 +10000 tip

mergemod: drop support for merge.update without a target
Mon, 21 Nov 2016 21:52:19 -0500, by Augie Fackler
dispatch: stop supporting non-use of @command
Mon, 21 Nov 2016 21:51:23 -0500, by Augie Fackler
httppeer: document why super() isn't used
Mon, 21 Nov 2016 20:12:51 -0800, by Gregory Szorc
exchange: add `_getbookmarks()` function
Thu, 17 Nov 2016 00:59:41 -0800, by Stanislau Hlebik
bookmarks: use listbinbookmarks() in listbookmarks()
Thu, 17 Nov 2016 00:59:41 -0800, by Stanislau Hlebik
bookmarks: introduce listbinbookmarks()
Thu, 17 Nov 2016 00:59:41 -0800, by Stanislau Hlebik
ui: add configoverride context manager
Mon, 21 Nov 2016 16:22:26 -0800, by Kostia Balytskyi
archival: simplify code and drop message about Python 2.5
Mon, 21 Nov 2016 18:17:02 -0500, by Augie Fackler
bugzilla: stop mentioning Pythons older than 2.6
Mon, 21 Nov 2016 17:52:32 -0500, by Augie Fackler
tests: update sitecustomize to use uuid1() instead of randrange()
Mon, 21 Nov 2016 17:51:39 -0500, by Augie Fackler
win32mbcs: drop code that was catering to Python 2.3 and earlier
Mon, 21 Nov 2016 17:48:13 -0500, by Augie Fackler
httppeer: drop an except block that says it happens only on Python 2.3
Mon, 21 Nov 2016 17:47:11 -0500, by Augie Fackler
windows: do not replace sys.stdout by winstdout
Fri, 21 Oct 2016 00:03:46 +0900, by Yuya Nishihara
py3: bulk replace sys.stdin/out/err by util's
Thu, 20 Oct 2016 23:53:36 +0900, by Yuya Nishihara
py3: provide bytes stdin/out/err through util module
Thu, 20 Oct 2016 23:40:24 +0900, by Yuya Nishihara
util: rewrite pycompat imports to make pyflakes always happy
Fri, 21 Oct 2016 00:09:38 +0900, by Yuya Nishihara
windows: do not replace sys.__stdout__
Thu, 20 Oct 2016 23:27:09 +0900, by Yuya Nishihara
py3: update test-check-py3-compat.t output
Mon, 21 Nov 2016 15:38:56 +0530, by Pulkit Goyal
py3: use pycompat.sysargv in dispatch.run()
Mon, 21 Nov 2016 15:35:22 +0530, by Pulkit Goyal
py3: use pycompat.sysargv in scmposix.systemrcpath()
Mon, 21 Nov 2016 15:26:47 +0530, by Pulkit Goyal
wireproto: perform chunking and compression at protocol layer (API)
Sun, 20 Nov 2016 13:50:45 -0800, by Gregory Szorc
httppeer: use compression engine API for decompressing responses
Sun, 20 Nov 2016 13:55:53 -0800, by Gregory Szorc
httppeer: do decompression inside _callstream
Sat, 19 Nov 2016 18:31:40 -0800, by Gregory Szorc
keepalive: reorder header precedence
Sat, 19 Nov 2016 17:11:12 -0800, by Gregory Szorc
debuginstall: print compression engine support
Sat, 19 Nov 2016 10:54:21 -0800, by Gregory Szorc
bdiff: don't check border condition in loop
Sun, 20 Nov 2016 16:56:21 -0800, by Gregory Szorc
conflicts: make spacing consistent in conflict markers
Sat, 19 Nov 2016 15:41:37 -0800, by Kostia Balytskyi
rebase: move bookmark update to before rebase clearing
Thu, 10 Nov 2016 09:21:41 -0800, by Durham Goode
setup: include a dummy $PATH in the custom environment used by build.py
Fri, 28 Oct 2016 17:44:28 +0200, by Gábor Stefanik
shelve: move unshelve-finishing logic to a separate function
Fri, 11 Nov 2016 07:01:27 -0800, by Kostia Balytskyi
shelve: move file-forgetting logic to a separate function
Thu, 10 Nov 2016 11:02:39 -0800, by Kostia Balytskyi
shelve: move rebasing logic to a separate function
Thu, 10 Nov 2016 10:57:10 -0800, by Kostia Balytskyi
shelve: move commit restoration logic to a separate function
Thu, 10 Nov 2016 10:51:06 -0800, by Kostia Balytskyi
shelve: move temporary commit creation to a separate function
Sun, 13 Nov 2016 03:35:52 -0800, by Kostia Balytskyi
commands: print chunk type in debugrevlog
Thu, 17 Nov 2016 20:30:00 -0800, by Gregory Szorc
perf: add command for measuring revlog chunk operations
Thu, 17 Nov 2016 20:17:51 -0800, by Gregory Szorc
setup: add flag to build_ext to control building zstd
Thu, 17 Nov 2016 20:09:10 -0800, by Gregory Szorc
drawdag: update test repos by drawing the changelog DAG in ASCII
Wed, 09 Nov 2016 16:01:34 +0000, by Jun Wu
posix: give checklink a fast path that cache the check file and is read only
Wed, 14 Jan 2015 01:15:26 +0100, by Mads Kiilerich
posix: move checklink test file to .hg/cache
Thu, 17 Nov 2016 12:59:36 +0100, by Mads Kiilerich
posix: give checkexec a fast path; keep the check files and test read only
Wed, 14 Jan 2015 01:15:26 +0100, by Mads Kiilerich
posix: simplify checkexec check
Wed, 14 Jan 2015 01:15:26 +0100, by Mads Kiilerich
posix: move checkexec test file to .hg/cache
Thu, 17 Nov 2016 12:59:36 +0100, by Mads Kiilerich
manifest: move manifestctx creation into manifestlog.get()
Thu, 17 Nov 2016 15:31:19 -0800, by Durham Goode
util: implement zstd compression engine
Fri, 11 Nov 2016 01:10:07 -0800, by Gregory Szorc
hghave: add check for zstd support
Thu, 10 Nov 2016 23:38:41 -0800, by Gregory Szorc
exchange: obtain compression engines from the registrar
Thu, 10 Nov 2016 23:34:15 -0800, by Gregory Szorc
bundle2: equate 'UN' with no compression
Thu, 10 Nov 2016 23:29:01 -0800, by Gregory Szorc
util: check for compression engine availability before returning
Thu, 10 Nov 2016 23:15:02 -0800, by Gregory Szorc
util: expose an "available" API on compression engines
Thu, 10 Nov 2016 23:03:48 -0800, by Gregory Szorc
setup: compile zstd C extension
Thu, 10 Nov 2016 22:26:35 -0800, by Gregory Szorc
zstd: vendor python-zstandard 0.5.0
Thu, 10 Nov 2016 22:15:58 -0800, by Gregory Szorc
zstd: vendor zstd 1.1.1
Thu, 10 Nov 2016 21:45:29 -0800, by Gregory Szorc
bdiff: give slight preference to removing trailing lines
Tue, 15 Nov 2016 21:56:49 +0100, by Mads Kiilerich
bdiff: give slight preference to appending lines
Tue, 15 Nov 2016 21:56:49 +0100, by Mads Kiilerich
bdiff: give slight preference to longest matches in the middle of the B side
Tue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
bdiff: rearrange the "better longest match" code
Tue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
bdiff: adjust criteria for getting optimal longest match in the A side middle
Tue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
tests: explore some bdiff cases
Tue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
tests: make test-bdiff.py easier to maintain
Tue, 15 Nov 2016 21:56:49 +0100, by Mads Kiilerich
perf: unbust perfbdiff --alldata
Thu, 17 Nov 2016 08:52:52 -0800, by Gregory Szorc
worker: discard waited pid by anyone who noticed it first
Thu, 17 Nov 2016 20:57:09 +0900, by Yuya Nishihara
worker: kill workers after all zombie processes are reaped
Thu, 17 Nov 2016 21:08:58 +0900, by Yuya Nishihara
worker: make sure killworkers() never be interrupted by another SIGCHLD
Thu, 17 Nov 2016 20:44:05 +0900, by Yuya Nishihara
worker: fix missed break on successful waitpid()
Thu, 17 Nov 2016 21:43:01 +0900, by Yuya Nishihara
filterpyflakes: dramatically simplify the entire thing by blacklisting
Thu, 10 Nov 2016 16:49:42 -0500, by Augie Fackler
run-tests: forward Python USER_BASE from site (issue5425)
Thu, 10 Nov 2016 16:07:24 -0500, by Augie Fackler
shelve: add missing space in help text stable
Mon, 14 Nov 2016 22:43:25 +0100, by Mads Kiilerich
util: improve iterfile so it chooses code path wisely
Tue, 15 Nov 2016 20:25:51 +0000, by Jun Wu
merge with stable
Wed, 16 Nov 2016 23:29:28 -0500, by Augie Fackler
worker: stop using a separate thread waiting for children
Sat, 12 Nov 2016 03:06:07 +0000, by Jun Wu
worker: add a SIGCHLD handler to collect worker immediately
Sat, 12 Nov 2016 03:07:22 +0000, by Jun Wu
worker: make waitforworkers reentrant
Tue, 15 Nov 2016 02:12:16 +0000, by Jun Wu
worker: change "pids" to a set
Tue, 15 Nov 2016 02:10:40 +0000, by Jun Wu
worker: allow waitforworkers to be non-blocking
Thu, 28 Jul 2016 20:57:07 +0100, by Jun Wu
worker: wait worker pid explicitly
Thu, 28 Jul 2016 20:51:20 +0100, by Jun Wu
worker: move killworkers and waitforworkers up
Thu, 28 Jul 2016 20:49:57 +0100, by Jun Wu
osutil: implement setprocname to set process title for some platforms
Fri, 11 Nov 2016 21:11:17 +0000, by Jun Wu
setup: test setproctitle before building osutil
Fri, 11 Nov 2016 20:45:40 +0000, by Jun Wu
patch: remove unused git parameter from patch.diffstat()
Sat, 12 Nov 2016 13:36:17 +0100, by Henning Schild
perf: add asv benchmarks
Thu, 29 Sep 2016 10:16:34 +0200, by Philippe Pepiot
perf: omit copying ui and redirect to ferr if buffer API is in use
Tue, 15 Nov 2016 16:10:57 +0100, by Philippe Pepiot
manifest: change treemanifestctx to construct subtrees from the manifestlog
Mon, 14 Nov 2016 15:24:07 -0800, by Durham Goode
manifest: make revlog verification optional
Mon, 14 Nov 2016 15:17:27 -0800, by Durham Goode
debugcommands: move debugbuilddag
Thu, 10 Nov 2016 09:45:42 -0800, by Gregory Szorc
debugcommands: introduce standalone module for debug commands
Wed, 17 Aug 2016 21:07:38 -0700, by Gregory Szorc
convert: migrate to util.iterfile
Mon, 14 Nov 2016 23:17:15 +0000, by Jun Wu
match: migrate to util.iterfile
Mon, 14 Nov 2016 23:16:05 +0000, by Jun Wu
store: migrate to util.iterfile
Mon, 14 Nov 2016 23:15:01 +0000, by Jun Wu
patch: migrate to util.iterfile
Mon, 14 Nov 2016 23:14:06 +0000, by Jun Wu
worker: migrate to util.iterfile
Mon, 14 Nov 2016 23:12:11 +0000, by Jun Wu
util: add iterfile to workaround a fileobj.__iter__ issue with EINTR
Mon, 14 Nov 2016 23:32:54 +0000, by Jun Wu
filterpyflakes: whitelist listcomp aliasing checking
Thu, 10 Nov 2016 16:37:18 -0500, by Augie Fackler
verify: avoid shadowing two variables with a list comprehension
Thu, 10 Nov 2016 16:35:54 -0500, by Augie Fackler
revset: avoid shadowing a variable with a list comprehension
Thu, 10 Nov 2016 16:35:10 -0500, by Augie Fackler
revlog: avoid shadowing several variables using list comprehensions
Thu, 10 Nov 2016 16:34:43 -0500, by Augie Fackler
minirst: avoid shadowing a variable in a list comprehension
Thu, 10 Nov 2016 16:33:41 -0500, by Augie Fackler
hbisect: avoid shadowing a variable in a list comprehension
Thu, 10 Nov 2016 16:33:23 -0500, by Augie Fackler
filemerge: avoid shadowing a variable in a list comprehension
Thu, 10 Nov 2016 16:33:07 -0500, by Augie Fackler
color: avoid shadowing a variable inside a list comprehension
Thu, 10 Nov 2016 16:32:51 -0500, by Augie Fackler
memory: avoid shadowing variables inside a list comprehension
Thu, 10 Nov 2016 16:32:38 -0500, by Augie Fackler
shelve: move shelve-finishing logic to a separate function
Thu, 10 Nov 2016 03:15:41 -0800, by Kostia Balytskyi
shelve: move unknown files handling to a separate function
Thu, 10 Nov 2016 03:20:28 -0800, by Kostia Balytskyi
shelve: move actual created commit shelving to a separate function
Thu, 10 Nov 2016 03:07:20 -0800, by Kostia Balytskyi
shelve: move 'nothing changed' messaging to a separate function
Thu, 10 Nov 2016 03:33:01 -0800, by Kostia Balytskyi
shelve: move commitfunc creation to a separate function
Thu, 10 Nov 2016 03:26:31 -0800, by Kostia Balytskyi
shelve: move mutableancestors to not be a closure
Thu, 10 Nov 2016 03:24:07 -0800, by Kostia Balytskyi
shelve: move shelve name generation to a separate function
Thu, 10 Nov 2016 03:22:55 -0800, by Kostia Balytskyi
shelve: move possible shelve file extensions to a single place
Thu, 10 Nov 2016 03:07:20 -0800, by Kostia Balytskyi
manifest: delete manifest.manifest class
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
localrepo: delete localrepo.manifest
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
manifest: remove last uses of repo.manifest
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
manifest: add unionmanifestlog support
Fri, 11 Nov 2016 01:20:13 -0800, by Durham Goode
manifest: add bundlemanifestlog support
Fri, 11 Nov 2016 01:15:59 -0800, by Durham Goode
manifest: make manifestlog use it's own cache
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
manifest: delete unused dirlog and _newmanifest functions
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
manifest: move clearcaches to manifestlog
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
manifest: remove usages of manifest.read
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
manifest: remove dependency on manifestrevlog being able to create trees
Thu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
color: show mode warning based on ui.formatted
Fri, 11 Nov 2016 13:06:05 +1100, by Xidorn Quan
protocol: drop unused import of zlib
Thu, 10 Nov 2016 15:14:05 -0500, by Augie Fackler
hook: lower inflated use of sys.__stdout__ and __stderr__
Tue, 08 Nov 2016 22:41:45 +0900, by Yuya Nishihara
hook: flush stdout before restoring stderr redirection
Tue, 08 Nov 2016 22:22:22 +0900, by Yuya Nishihara
hook: do not redirect stdout/err/in to ui while running in-process hooks (BC)
Thu, 20 Oct 2016 22:39:59 +0900, by Yuya Nishihara
merge: change modified indicator to be 20 bytes
Thu, 10 Nov 2016 02:21:15 -0800, by Durham Goode
dirstate: change added/modified placeholder hash length to 20 bytes
Thu, 10 Nov 2016 02:19:16 -0800, by Durham Goode
dirstate: change placeholder hash length to 20 bytes
Thu, 10 Nov 2016 02:17:22 -0800, by Durham Goode
util: remove compressorobj API from compression engines
Mon, 07 Nov 2016 18:57:54 -0800, by Gregory Szorc
hgweb: use compression engine API for zlib compression
Mon, 07 Nov 2016 18:54:35 -0800, by Gregory Szorc
bundle2: use compressstream compression engine API
Mon, 07 Nov 2016 18:46:37 -0800, by Gregory Szorc
util: add a stream compression API to compression engines
Mon, 07 Nov 2016 18:57:07 -0800, by Gregory Szorc
util: remove decompressors dict (API)
Mon, 07 Nov 2016 18:39:08 -0800, by Gregory Szorc
changegroup: use compression engines API
Mon, 07 Nov 2016 18:38:13 -0800, by Gregory Szorc
bundle2: use compression engines API to obtain decompressor
Mon, 07 Nov 2016 18:36:48 -0800, by Gregory Szorc
util: remove compressors dict (API)
Mon, 07 Nov 2016 18:34:51 -0800, by Gregory Szorc
bundle2: use new compression engine API for compression
Mon, 07 Nov 2016 18:35:43 -0800, by Gregory Szorc
util: create new abstraction for compression engines
Mon, 07 Nov 2016 18:31:39 -0800, by Gregory Szorc
config: mark parser regexes as bytes explicitly
Sun, 09 Oct 2016 09:25:39 -0400, by Augie Fackler
ui: explicitly open config files in binary mode
Sun, 09 Oct 2016 09:17:49 -0400, by Augie Fackler
help: fix double word usage
Wed, 09 Nov 2016 16:04:44 -0800, by Gregory Szorc
setup: move cffi stuff to mercurial/cffi
Wed, 09 Nov 2016 22:08:30 +0000, by Jun Wu
manifest: remove manifest.add and add memmfctx.write
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
context: add manifestctx property on changectx
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
manifest: add copy to mfctx classes
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
manifest: introduce memmanifestctx and memtreemanifestctx
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
manifestctx: add _revlog() function
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
manifest: remove manifest.find
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
changegroup: remove remaining uses of repo.manifest
Tue, 08 Nov 2016 08:03:43 -0800, by Durham Goode
treemanifest: fix a "treeinmem" case
Fri, 04 Nov 2016 13:49:15 -0700, by Martin von Zweigbergk
perf: support measuring bdiff for all changeset related data
Sun, 06 Nov 2016 10:46:55 -0800, by Gregory Szorc
perf: support bdiffing multiple revisions in a single revlog
Sun, 06 Nov 2016 11:01:25 -0800, by Gregory Szorc
perf: prepare to handle multiple pairs in perfbdiff
Sun, 06 Nov 2016 09:51:14 -0800, by Gregory Szorc
py3: document why os.fsencode() can be used to get back bytes argv
Wed, 09 Nov 2016 22:06:09 +0900, by Yuya Nishihara
py3: update test-check-py3-compat.t output
Wed, 09 Nov 2016 22:15:51 +0900, by Yuya Nishihara
spelling: fixes of non-dictionary words
Mon, 17 Oct 2016 23:16:55 +0200, by Mads Kiilerich
manifest: add __nonzero__ method
Thu, 03 Nov 2016 17:31:14 -0700, by Durham Goode
py3: have bytes version of sys.argv
Sun, 06 Nov 2016 04:36:26 +0530, by Pulkit Goyal
util: use '\\' rather than using r'\'
Sun, 09 Oct 2016 09:00:47 -0400, by Augie Fackler
util: use pycompat urlunquote function
Sun, 09 Oct 2016 09:03:10 -0400, by Augie Fackler
pycompat: introduce an alias for urllib.unquote
Sun, 09 Oct 2016 09:02:25 -0400, by Augie Fackler
keyword: handle filectx _customcmp
Mon, 17 Oct 2016 17:42:46 +0200, by Christian Ebert
mail: do not print(), use ui.debug() instead
Thu, 20 Oct 2016 22:20:31 +0900, by Yuya Nishihara
progress: obtain stderr from ui
Thu, 20 Oct 2016 22:12:48 +0900, by Yuya Nishihara
simplemerge: obtain stdout from ui
Thu, 20 Oct 2016 22:09:50 +0900, by Yuya Nishihara
profiling: obtain stderr from ui
Thu, 20 Oct 2016 22:07:03 +0900, by Yuya Nishihara
scmutil: ignore EPERM at os.utime, which avoids ambiguity at closing stable
Sun, 13 Nov 2016 06:12:22 +0900, by FUJIWARA Katsunori
vfs: ignore EPERM at os.utime, which avoids ambiguity at renaming (issue5418) stable
Sun, 13 Nov 2016 06:11:56 +0900, by FUJIWARA Katsunori
util: add utility function to skip avoiding file stat ambiguity if EPERM stable
Sun, 13 Nov 2016 06:06:23 +0900, by FUJIWARA Katsunori
bdiff: replace hash algorithm
Sun, 06 Nov 2016 18:51:57 -0800, by Gregory Szorc
profiling: make statprof the default profiler (BC)
Fri, 04 Nov 2016 21:44:25 -0700, by Gregory Szorc
profiling: use vendored statprof and upstream enhancements (BC)
Fri, 04 Nov 2016 20:50:38 -0700, by Gregory Szorc
crecord: use scmutil.termsize()
Thu, 20 Oct 2016 23:16:32 +0900, by Yuya Nishihara
scmutil: extend termwidth() to return terminal height, renamed to termsize()
Thu, 20 Oct 2016 23:09:05 +0900, by Yuya Nishihara
scmutil: clarify that we explicitly do termwidth - 1 on Windows
Thu, 20 Oct 2016 22:57:12 +0900, by Yuya Nishihara
scmutil: remove superfluous indent from termwidth()
Thu, 20 Oct 2016 21:57:32 +0900, by Yuya Nishihara
scmutil: narrow ImportError handling in termwidth()
Thu, 20 Oct 2016 21:50:29 +0900, by Yuya Nishihara
scmutil: make termwidth() obtain stdio from ui
Thu, 20 Oct 2016 21:42:11 +0900, by Yuya Nishihara
scmutil: move util.termwidth()
Thu, 20 Oct 2016 21:38:44 +0900, by Yuya Nishihara
bdiff: don't check border condition in loop
Sun, 06 Nov 2016 00:37:50 -0700, by Gregory Szorc
perf: add perfbdiff
Sat, 05 Nov 2016 23:41:52 -0700, by Gregory Szorc
help: show help for disabled extensions (issue5228)
Sun, 06 Nov 2016 06:54:31 +0530, by Pulkit Goyal
py3: make scmutil.rcpath() return bytes
Sun, 06 Nov 2016 04:17:19 +0530, by Pulkit Goyal
py3: use pycompat.ossep at certain places
Sun, 06 Nov 2016 04:10:33 +0530, by Pulkit Goyal
py3: have pycompat.ospathsep and pycompat.ossep
Sun, 06 Nov 2016 03:44:44 +0530, by Pulkit Goyal
py3: add a bytes version of os.name
Sun, 06 Nov 2016 03:33:22 +0530, by Pulkit Goyal
py3: make util.datapath a bytes variable
Sun, 06 Nov 2016 12:18:23 +0900, by Pulkit Goyal
py3: add os.fsdecode() as pycompat.fsdecode()
Sun, 06 Nov 2016 03:12:40 +0530, by Pulkit Goyal
statprof: return state from stop()
Fri, 04 Nov 2016 20:22:37 -0700, by Gregory Szorc
hgweb: cache fctx.parents() in annotate command (issue5414) stable
Sat, 05 Nov 2016 09:38:07 -0700, by Gregory Szorc
hghave: check darcs version more strictly
Sat, 05 Nov 2016 13:20:53 +0900, by Yuya Nishihara
tests: silence output of darcs command
Sat, 05 Nov 2016 13:16:40 +0900, by Yuya Nishihara
manifest: remove manifest.readshallowdelta
Wed, 02 Nov 2016 17:10:47 -0700, by Durham Goode
manifest: get rid of manifest.readshallowfast
Wed, 02 Nov 2016 17:10:47 -0700, by Durham Goode
manifest: add shallow option to treemanifestctx.readdelta and readfast
Wed, 02 Nov 2016 17:10:47 -0700, by Durham Goode
manifest: change manifestlog mancache to be directory based
Wed, 02 Nov 2016 17:10:47 -0700, by Durham Goode
manifest: add manifestlog.get to obtain subdirectory instances
Wed, 02 Nov 2016 17:24:06 -0700, by Durham Goode
manifest: throw LookupError if node not in revlog
Wed, 02 Nov 2016 17:33:31 -0700, by Durham Goode
revlog: optimize _chunkraw when startrev==endrev
Sun, 23 Oct 2016 10:40:33 -0700, by Gregory Szorc
revlog: inline start() and end() for perf reasons
Sat, 22 Oct 2016 15:41:23 -0700, by Gregory Szorc
revlog: reorder index accessors to match data structure order
Sun, 23 Oct 2016 09:34:55 -0700, by Gregory Szorc
color: add the ability to display configured style to 'debugcolor'
Thu, 03 Nov 2016 15:17:02 +0100, by Pierre-Yves David
color: sort output of 'debugcolor'
Thu, 03 Nov 2016 15:15:47 +0100, by Pierre-Yves David
color: extract color and effect display from 'debugcolor'
Thu, 03 Nov 2016 14:48:47 +0100, by Pierre-Yves David
color: restore _style global after debugcolor ran
Thu, 03 Nov 2016 14:29:19 +0100, by Pierre-Yves David
color: add basic documentation to 'debugcolor'
Thu, 03 Nov 2016 14:12:32 +0100, by Pierre-Yves David
tests: merge 'test-push-hook-lock.t' into 'test-push.t'
Thu, 03 Nov 2016 05:12:23 +0100, by Pierre-Yves David
tests: merge 'test-push-validation.t' into 'test-push.t'
Thu, 03 Nov 2016 05:10:14 +0100, by Pierre-Yves David
test: rename 'test-push-r.t' to 'test-push.t'
Thu, 03 Nov 2016 04:58:46 +0100, by Pierre-Yves David
tests: simplify command script in 'test-push-r.t'
Thu, 03 Nov 2016 05:05:34 +0100, by Pierre-Yves David
py3: use encoding.environ in ui.py
Thu, 03 Nov 2016 03:12:57 +0530, by Pulkit Goyal
py3: make scmposix.userrcpath() return bytes
Thu, 03 Nov 2016 02:17:01 +0530, by Pulkit Goyal
adjustlinkrev: remove unnecessary parameters
Tue, 01 Nov 2016 08:22:50 +0000, by Jun Wu
repair: make strip() return backup file path
Mon, 31 Oct 2016 15:40:30 -0700, by Martin von Zweigbergk
rebase: check for conflicts before continuing
Wed, 02 Nov 2016 18:59:29 +0000, by timeless
cmdutil: refactor checkunresolved
Wed, 02 Nov 2016 18:45:53 +0000, by timeless
rebase: rename merge to mergemod
Wed, 02 Nov 2016 18:56:07 +0000, by timeless
context: make sure __str__ works, also when there is no _changectx
Thu, 19 Mar 2015 22:22:50 +0100, by Mads Kiilerich
largefiles: clarify variable name holding file mode
Tue, 18 Oct 2016 16:45:39 +0200, by Mads Kiilerich
changegroup: use changelogrevision()
Tue, 01 Nov 2016 18:29:09 -0700, by Gregory Szorc
changegroup: cache changelog and manifestlog outside of loop
Tue, 01 Nov 2016 18:28:03 -0700, by Gregory Szorc
make: targets for building packages for ubuntu yakkety
Tue, 01 Nov 2016 18:49:23 -0700, by Gregory Szorc
util: put compression code next to each other
Sat, 15 Oct 2016 17:24:01 -0700, by Gregory Szorc
hgweb: make log streams compatible with command server
Sat, 28 Jun 2014 13:13:32 +0900, by Yuya Nishihara
cmdserver: write channel header and payload by a single write() call
Mon, 29 Feb 2016 13:41:54 +0900, by Yuya Nishihara
histedit: use ui.fin to read commands from stdin
Fri, 18 Mar 2016 17:15:06 -0700, by Yuya Nishihara
convert: have debugsvnlog obtain standard streams from ui
Sat, 03 Oct 2015 14:34:56 +0900, by Yuya Nishihara
convert: remove superfluous setbinary() calls from debugsvnlog
Sat, 03 Oct 2015 14:29:13 +0900, by Yuya Nishihara
tests: explicitly use ls profiler
Wed, 17 Aug 2016 08:52:15 -0700, by Gregory Szorc
statprof: pass data structure to display functions
Tue, 01 Nov 2016 19:03:11 -0700, by Gregory Szorc
statprof: use print function
Sun, 14 Aug 2016 19:20:12 -0700, by Gregory Szorc
statprof: use absolute_imports
Tue, 01 Nov 2016 18:55:30 -0700, by Gregory Szorc
statprof: require paths to save or load profile data
Sun, 14 Aug 2016 19:14:05 -0700, by Gregory Szorc
statprof: fix flake8 warnings
Sun, 14 Aug 2016 19:13:32 -0700, by Gregory Szorc
statprof: vendor statprof.py
Tue, 01 Nov 2016 18:54:03 -0700, by Gregory Szorc
merge with stable
Tue, 01 Nov 2016 15:40:21 -0400, by Augie Fackler
Added signature for changeset eab274469952 stable
Tue, 01 Nov 2016 14:12:39 -0400, by Augie Fackler
Added tag 4.0 for changeset eab274469952 stable
Tue, 01 Nov 2016 14:12:37 -0400, by Augie Fackler
merge with i18n stable 4.0
Tue, 01 Nov 2016 13:03:42 -0500, by Kevin Bullock
i18n-ja: synchronized with 69ffbbe73dd0 stable
Tue, 01 Nov 2016 04:27:41 +0900, by FUJIWARA Katsunori
tag: clarify warning about making a tag on a branch head stable
Mon, 31 Oct 2016 17:12:32 -0500, by Nathan Goldbaum

less more | rev 30486: (0) -30000 -10000 -3000 -1000 -240 +240 +1000 +3000 +10000 tip

Mercurial > hg

graph