Mercurial > hg
graph
-
py3: fix type of default usernameSun, 04 Mar 2018 18:34:46 -0500, by Yuya Nishihara
-
py3: read/write plain lock file in binary modeSun, 04 Mar 2018 18:21:16 -0500, by Yuya Nishihara
-
util: stop calling os.stat_float_times()Mon, 05 Mar 2018 12:31:08 -0500, by Augie Fackler
-
cleanup: use stat_result[stat.ST_MTIME] instead of stat_result.st_mtimeMon, 05 Mar 2018 12:30:20 -0500, by Augie Fackler
-
osutil: implement minimal __getitem__ compatibility on our custom listdir typeMon, 05 Mar 2018 15:07:32 -0500, by Augie Fackler
-
hgweb: adapt to socket._fileobject changes in Python 3Sun, 04 Mar 2018 21:14:24 -0500, by Augie Fackler
-
debugcommands: fix some %r output with bytestr() wrappersSun, 04 Mar 2018 16:20:24 -0500, by Augie Fackler
-
tests: add test for issue 5494 but with --collapseWed, 07 Mar 2018 11:00:17 -0800, by Martin von Zweigbergk
-
tests: .hg/merge is a directory, so use `test -d`Wed, 07 Mar 2018 10:55:57 -0800, by Martin von Zweigbergk
-
rebase: only store collapse message onceTue, 06 Mar 2018 14:29:20 -0800, by Martin von Zweigbergk
-
rebase: collapse two nested if-conditionsTue, 06 Mar 2018 09:39:24 -0800, by Martin von Zweigbergk
-
rebase: reduce scope of "dsguard" variables a bitThu, 01 Mar 2018 20:12:25 -0800, by Martin von Zweigbergk
-
rebase: remove unused argument "state" from rebasenode()Wed, 07 Mar 2018 09:46:53 -0800, by Martin von Zweigbergk
-
rebase: delete obsolete internal "keepopen" optionWed, 07 Mar 2018 10:31:01 -0800, by Martin von Zweigbergk
-
releasenotes: allow notes for multiple directives in a single changesetSun, 04 Mar 2018 00:25:58 +0530, by Rishabh Madan
-
releasenotes: mention changeset with warning and abortSun, 04 Mar 2018 00:15:35 +0530, by Rishabh Madan
-
releasenotes: replace abort with warning while parsing (issue5775)Sat, 03 Mar 2018 23:47:22 +0530, by Rishabh Madan
-
archival: fileit should not use atomictemp, causes performance regressionWed, 07 Mar 2018 09:07:34 +1100, by Vincent Parrett
-
perf: teach perfbdiff to call blocks() and to use xdiffSat, 03 Mar 2018 18:55:43 -0500, by Gregory Szorc
-
fuzz: fix xdiff buildTue, 06 Mar 2018 19:31:17 -0800, by Jun Wu
-
xdiff: remove xmerge related logicTue, 06 Mar 2018 18:51:11 -0800, by Jun Wu
-
xdiff: remove xemit related logicTue, 06 Mar 2018 18:41:08 -0800, by Jun Wu
-
xdiff: remove unused structure, functions, and constantsSun, 04 Mar 2018 00:17:49 -0800, by Jun Wu
-
xdiff: remove whitespace related featureSun, 04 Mar 2018 00:07:04 -0800, by Jun Wu
-
merge with stableTue, 06 Mar 2018 14:32:14 -0800, by Gregory Szorc
-
hgweb: always perform permissions checks on protocol commands (BC) (SEC) stableSun, 18 Feb 2018 17:20:38 -0800, by Gregory Szorc
-
wireproto: check permissions when executing "batch" command (BC) (SEC) stableTue, 20 Feb 2018 18:55:58 -0800, by Gregory Szorc
-
wireproto: declare operation type for most commands (BC) (SEC) stableTue, 20 Feb 2018 18:54:27 -0800, by Gregory Szorc
-
wireproto: move command permissions dict out of hgweb_mod stableTue, 20 Feb 2018 18:53:39 -0800, by Gregory Szorc
-
tests: comprehensively test HTTP server permissions checking stableTue, 20 Feb 2018 19:09:01 -0800, by Gregory Szorc
-
tests: extract HTTP permissions tests to own test file stableSun, 18 Feb 2018 10:40:49 -0800, by Gregory Szorc
-
revlog: resolve lfs rawtext to vanilla rawtext before applying delta stable 4.5.1Tue, 13 Feb 2018 11:35:32 -0800, by Jun Wu
-
sslutil: some more forcebytes() on some exception messagesSun, 04 Mar 2018 21:16:36 -0500, by Augie Fackler
-
sslutil: sslcontext needs the cipher name as a sysstrSun, 04 Mar 2018 21:15:37 -0500, by Augie Fackler
-
sslutil: lots of unicode/bytes cleanupSun, 04 Mar 2018 18:03:55 -0500, by Augie Fackler
-
lfs: add a test showing bundle application could be broken stableTue, 06 Feb 2018 16:08:57 -0800, by Jun Wu
-
debugwireproto: handle unimplemented util.poll() for WindowsMon, 05 Mar 2018 20:22:34 -0500, by Matt Harbison
-
py3: byte-stringify test-blackbox.tSun, 04 Mar 2018 16:55:51 -0500, by Yuya Nishihara
-
py3: byte-stringify blackbox-readonly-dispatch.pySun, 04 Mar 2018 16:54:14 -0500, by Yuya Nishihara
-
py3: make blackbox-readonly-dispatch.py use ui instead of print()Sun, 04 Mar 2018 16:50:35 -0500, by Yuya Nishihara
-
py3: fix int formatting of "incoming changes" logSun, 04 Mar 2018 16:48:17 -0500, by Yuya Nishihara
-
largefiles: use %d instead of %s to process intsSun, 04 Mar 2018 16:48:01 -0500, by Augie Fackler
-
transaction: fix an error string with bytestr() on a repr()d valueSun, 04 Mar 2018 16:11:15 -0500, by Augie Fackler
-
py3: work around comparison between int and None in tagmergeSun, 04 Mar 2018 16:23:10 -0500, by Yuya Nishihara
-
py3: do not mutate dict while iterating in tagmergeSun, 04 Mar 2018 16:13:46 -0500, by Yuya Nishihara
-
py3: fix type of ui.configitems(ignoresub=True) resultSun, 04 Mar 2018 16:01:18 -0500, by Yuya Nishihara
-
py3: don't use str() to stringify pushlocSun, 04 Mar 2018 15:53:10 -0500, by Yuya Nishihara
-
py3: byte-stringify test-config.t and test-config-env.pySun, 04 Mar 2018 15:26:26 -0500, by Yuya Nishihara
-
py3: use startswith() instead of slicing to detect leading whitespaceSun, 04 Mar 2018 15:24:45 -0500, by Yuya Nishihara
-
archival: use py3 friendly replacements for chr() and long()Sun, 04 Mar 2018 16:06:47 -0500, by Augie Fackler
-
archival: ensure file mode for gzipfile is sysstrSun, 04 Mar 2018 16:06:27 -0500, by Augie Fackler
-
archival: fix a missing r'' on a kwargs checkSun, 04 Mar 2018 16:06:10 -0500, by Augie Fackler
-
py3: more passing tests (ten this time)Sun, 04 Mar 2018 16:05:44 -0500, by Augie Fackler
-
util: fix unsafe url abort with bytestr() on urlSun, 04 Mar 2018 15:55:55 -0500, by Augie Fackler
-
xdiff: fix builds on WindowsSun, 04 Mar 2018 15:16:42 -0500, by Matt Harbison
-
py3: use bytes() instead of str()Mon, 05 Mar 2018 01:08:40 +0530, by Pulkit Goyal
-
py3: use b"%d" instead of str() to convert integers to bytesMon, 05 Mar 2018 01:05:54 +0530, by Pulkit Goyal
-
py3: use util.forcebytestr to convert testedwith value to bytesMon, 05 Mar 2018 01:03:23 +0530, by Pulkit Goyal
-
py3: use pycompat.bytestr instead of strSun, 04 Mar 2018 22:33:59 +0530, by Pulkit Goyal
-
setdiscovery: avoid a Yoda conditionSun, 04 Mar 2018 07:40:21 -0800, by Martin von Zweigbergk
-
setdiscovery: remove unnecessary sample size limitingSun, 04 Mar 2018 07:40:11 -0800, by Martin von Zweigbergk
-
setdiscovery: remove initialsamplesize from a conditionSun, 04 Mar 2018 07:39:46 -0800, by Martin von Zweigbergk
-
setdiscovery: back out changeset 5cfdf6137af8 (issue5809)Sun, 04 Mar 2018 07:37:08 -0800, by Martin von Zweigbergk
-
hgweb: fix up trailing slash detection on Python 3Sun, 04 Mar 2018 13:04:12 -0500, by Augie Fackler
-
hgweb: convert req.form to bytes for all keys and valuesSun, 04 Mar 2018 13:03:22 -0500, by Augie Fackler
-
templater: show repr of string we're rejectingSun, 04 Mar 2018 12:33:15 -0500, by Augie Fackler
-
webutil: some %d instead of %s love on intsSun, 04 Mar 2018 12:21:01 -0500, by Augie Fackler
-
py3: whitelist three more casesSun, 04 Mar 2018 12:17:02 -0500, by Augie Fackler
-
archival: our filenames are bytes, not strsSun, 04 Mar 2018 12:08:53 -0500, by Augie Fackler
-
archival: tar file modes need to be sysstrsSun, 04 Mar 2018 12:08:37 -0500, by Augie Fackler
-
archival: fsdecode paths before passing to tar or zip objectsSun, 04 Mar 2018 12:08:19 -0500, by Augie Fackler
-
py3: add b'' prefixes in tests/test-minirst.pySun, 04 Mar 2018 05:15:24 +0530, by Pulkit Goyal
-
py3: make sure __repr__ returns a strSun, 04 Mar 2018 22:40:33 +0530, by Pulkit Goyal
-
py3: make sure regular expressions are bytesSun, 04 Mar 2018 22:40:08 +0530, by Pulkit Goyal
-
py3: use bytes instead of str to make sure we use bytes internallySun, 04 Mar 2018 05:53:59 +0530, by Pulkit Goyal
-
py3: use util.forcebytestr instead of str to convert error messagesSun, 04 Mar 2018 22:37:41 +0530, by Pulkit Goyal
-
lock: block signal interrupt while making a lock fileSat, 03 Mar 2018 23:49:39 -0500, by Yuya Nishihara
-
fuzz: add some more docs about building/running fuzzersSun, 04 Mar 2018 09:40:12 -0500, by Augie Fackler
-
util: also silence py3 warnings from codec moduleSun, 04 Mar 2018 11:49:33 -0500, by Augie Fackler
-
test-annotate: set stdin and stdout to binary to get CR unmodified stableSun, 04 Mar 2018 14:53:57 -0500, by Yuya Nishihara
-
test-annotate: rewrite sed with some python stableSun, 04 Mar 2018 13:19:05 -0500, by Yuya Nishihara
-
docs: small fixes for profiling.nested and the overall descriptionThu, 15 Feb 2018 18:05:58 -0800, by Kyle Lippincott
-
scmutil: fix oversight in b76248e51605c6 where I forgot to use msgSun, 04 Mar 2018 10:20:41 -0500, by Augie Fackler
-
hghave: remove unused "as ex" in exception blockSun, 04 Mar 2018 10:23:07 -0500, by Augie Fackler
-
tests: port test-log to Python 3Sat, 03 Mar 2018 18:33:10 -0500, by Augie Fackler
-
py3: make gettext domain a system stringSat, 03 Mar 2018 19:12:47 -0500, by Yuya Nishihara
-
templater: fix position of terminator character in error messageSun, 04 Mar 2018 07:03:50 -0500, by Yuya Nishihara
-
merge with stableSun, 04 Mar 2018 10:42:51 -0500, by Augie Fackler
-
subrepo: activate clone pooling to enable sharing with remote URLs stableThu, 01 Mar 2018 11:37:00 -0500, by Matt Harbison
-
subrepo: don't attempt to share remote sources (issue5793) stableThu, 01 Mar 2018 11:13:00 -0500, by Matt Harbison
-
test-subrepo: demonstrate problems with subrepo sharing and absolute paths stableWed, 28 Feb 2018 00:29:27 -0500, by Matt Harbison
-
revsetlang: add a hint for more useful parse errorsSat, 03 Mar 2018 15:31:37 -0800, by Ryan McElroy
-
setup: ignore extension load failures when finding working hgSat, 03 Mar 2018 11:07:46 -0800, by Ryan McElroy
-
profile: colorize output on WindowsSat, 03 Mar 2018 00:35:59 -0500, by Matt Harbison
-
dispatch: don't clamp the range of the exit code twiceSat, 03 Mar 2018 19:02:50 -0500, by Kevin Bullock
-
bdiff: avoid pointer arithmetic on void*Sat, 03 Mar 2018 23:29:40 -0500, by Matt Harbison
-
fuzz: add a quick README to try and document how to test new fuzzersSat, 03 Mar 2018 19:26:30 -0500, by Augie Fackler
-
fuzz: add a fuzzer for xdiffSat, 03 Mar 2018 18:58:13 -0500, by Augie Fackler
-
tests: add tests about diff qualitySat, 03 Mar 2018 12:39:15 -0800, by Jun Wu
-
run-tests: allow #require inside #ifSat, 03 Mar 2018 12:39:14 -0800, by Jun Wu
-
mdiff: add a config option to use xdiff algorithmSat, 03 Mar 2018 12:39:14 -0800, by Jun Wu
-
bdiff: add a xdiffblocks methodSat, 03 Mar 2018 12:39:14 -0800, by Jun Wu
-
xdiff: reduce indent heuristic overheadSat, 03 Mar 2018 12:39:11 -0800, by Jun Wu
-
xdiff: add a bdiff hunk modeSat, 03 Mar 2018 12:38:41 -0800, by Jun Wu
-
xdiff: remove patience and histogram diff algorithmsSat, 03 Mar 2018 10:39:55 -0800, by Jun Wu
-
xdiff: vendor xdiff library from gitSat, 03 Mar 2018 10:39:43 -0800, by Jun Wu
-
templater: provide hint for multi-line templates with parse errorsSat, 03 Mar 2018 14:30:21 -0800, by Ryan McElroy
-
templater: add hint to template parse errors to help locate issuesSat, 03 Mar 2018 14:23:40 -0800, by Ryan McElroy
-
py3: use b"%d" to covert integer to bytes instead of strFri, 02 Mar 2018 07:17:06 +0530, by Pulkit Goyal
-
py3: use bytes() instead of str()Fri, 02 Mar 2018 07:16:33 +0530, by Pulkit Goyal
-
py3: replace __str__ to __bytes__ in hgext/journal.pyFri, 02 Mar 2018 07:15:54 +0530, by Pulkit Goyal
-
testrunner: add option to sort tests by previous run timeWed, 31 Jan 2018 22:21:33 -0800, by Martin von Zweigbergk
-
py3: whitelist another 15 passing testsSat, 03 Mar 2018 17:53:32 -0500, by Augie Fackler
-
cmdutil: ensure PatchError messages are coerded to bytes, not strSat, 03 Mar 2018 17:09:26 -0500, by Augie Fackler
-
tests: fix bytes literals in test-fncache.tSat, 03 Mar 2018 17:08:41 -0500, by Augie Fackler
-
scmutil: avoid using basestring and add explicit handling of unicodesSat, 03 Mar 2018 17:08:05 -0500, by Augie Fackler
-
tests: fix inline extension bytes in test-ssh-proto-unbundle.tSat, 03 Mar 2018 17:07:18 -0500, by Augie Fackler
-
hghave: fix up clang-libfuzzer regex to be bytesSat, 03 Mar 2018 16:38:17 -0500, by Augie Fackler
-
py3: accept both unicode and byte strings as filename carried by IOErrorSat, 03 Mar 2018 15:41:12 -0500, by Yuya Nishihara
-
py3: back out c77c925987d7 to store bytes filename in IOErrorSat, 03 Mar 2018 15:33:52 -0500, by Yuya Nishihara
-
largefiles: headers and values need to be sysstrs, add r prefixesSat, 03 Mar 2018 14:57:23 -0500, by Augie Fackler
-
cext: accept arguments as Py_bufferSat, 03 Mar 2018 11:26:30 -0500, by Gregory Szorc
-
cext: refactor cleanup code in bdiff()Sat, 03 Mar 2018 11:19:43 -0500, by Gregory Szorc
-
py3: use pycompat.bytestr() to convert error messages to bytesFri, 02 Mar 2018 07:13:33 +0530, by Pulkit Goyal
-
url: more bytes/unicodes fussing in url.py around auth handlingSat, 03 Mar 2018 14:28:51 -0500, by Augie Fackler
-
httpconnection: convert url to bytes in readauthforuriSat, 03 Mar 2018 14:24:21 -0500, by Augie Fackler
-
tests: prevent enormous output spew in test-lfs-largefiles.tSat, 03 Mar 2018 14:44:41 -0500, by Augie Fackler
-
py3: fix formatting of path-auditing errorsSat, 03 Mar 2018 12:23:03 -0500, by Yuya Nishihara
-
py3: make os.curdir a bytesSat, 03 Mar 2018 12:36:05 -0500, by Yuya Nishihara
-
py3: make os.pardir a bytesSat, 03 Mar 2018 12:34:35 -0500, by Yuya Nishihara
-
py3: fix slicing of bytes in patch.iterhunks()Sat, 03 Mar 2018 14:21:47 -0500, by Yuya Nishihara
-
tests: fix various test-check-module-imports.t violationsSat, 03 Mar 2018 09:35:59 -0500, by Augie Fackler
-
pycompat: prevent encoding or decoding values if not requiredTue, 27 Feb 2018 00:33:46 +0530, by Pulkit Goyal
-
py3: add some b'' to make test-lock-badness.t happySat, 03 Mar 2018 10:39:48 -0500, by Yuya Nishihara
-
py3: fix formatting of lock error messageSat, 03 Mar 2018 10:32:06 -0500, by Yuya Nishihara
-
py3: fix some unicode madness in global exception catcherSat, 03 Mar 2018 10:02:36 -0500, by Yuya Nishihara
-
py3: pass a system-string filename to sub-classes of IOErrorSat, 03 Mar 2018 10:08:13 -0500, by Yuya Nishihara
-
py3: fix some membership tests on linkrev adjustmentSat, 03 Mar 2018 09:19:34 -0500, by Yuya Nishihara
-
py3: make test-basic.t pass on Python 3Fri, 02 Mar 2018 22:38:09 -0500, by Yuya Nishihara
-
py3: silence the final IOError by closing stdout/err slightly earlyFri, 02 Mar 2018 22:35:20 -0500, by Yuya Nishihara
-
py3: conditionalize initialization of stdio flagsFri, 02 Mar 2018 22:10:36 -0500, by Yuya Nishihara
-
test-command-template: glob out detailed "invalid escape" messageThu, 01 Mar 2018 18:25:19 -0500, by Yuya Nishihara
-
templater: byte-stringify dict/list values before passing to default formatThu, 01 Mar 2018 08:14:54 -0500, by Yuya Nishihara
-
templater: allow dynamically switching the default dict/list formattingThu, 01 Mar 2018 08:07:22 -0500, by Yuya Nishihara
-
py3: use util.forcevytestr to convert error to bytesSat, 03 Mar 2018 21:01:07 +0530, by Pulkit Goyal
-
util: report integer result from write()Sat, 03 Mar 2018 09:50:07 -0500, by Gregory Szorc
-
util: log readinto() I/OSat, 03 Mar 2018 09:34:06 -0500, by Gregory Szorc
-
util: teach escapedata() about bytearrayFri, 02 Mar 2018 22:47:18 -0500, by Gregory Szorc
-
sshpeer: don't read(0)Fri, 02 Mar 2018 22:59:12 -0500, by Gregory Szorc
-
py3: unblock C extensions on Python 3Sat, 03 Mar 2018 05:51:34 -0500, by Yuya Nishihara
-
py3: make test-ancestors.py pass on Python 3 with C extensionsSat, 03 Mar 2018 07:59:20 -0500, by Yuya Nishihara
-
py3: do not pass a memoryview to bdiff.bdiff()Sat, 03 Mar 2018 07:24:25 -0500, by Yuya Nishihara
-
py3: do not pass a list of iterators to computephasesmapsets()Sat, 03 Mar 2018 07:00:37 -0500, by Yuya Nishihara
-
cext: fix computephasesmapsets() not to return without setting an exceptionSat, 03 Mar 2018 06:57:02 -0500, by Yuya Nishihara
-
py3: do not pass a float to dict_new_presized()Sat, 03 Mar 2018 06:44:47 -0500, by Yuya Nishihara
-
cext: mark tuple_format as a constantSat, 03 Mar 2018 06:41:52 -0500, by Yuya Nishihara
-
py3: bulk-replace 'const char*' format specifier passed to PyArg_ParseTuple*()Sat, 03 Mar 2018 06:18:47 -0500, by Yuya Nishihara
-
py3: bulk-replace bytes format specifier passed to Py_BuildValue()Sat, 03 Mar 2018 06:08:22 -0500, by Yuya Nishihara
-
py3: add PY23() macro to switch string literal depending on python versionSat, 03 Mar 2018 05:58:41 -0500, by Yuya Nishihara
-
py3: don't try to mangle C extension blob by code transformerSat, 03 Mar 2018 05:50:45 -0500, by Yuya Nishihara
-
tests: add missing b prefixes in test-atomictempfile.pyFri, 02 Mar 2018 18:47:27 -0500, by Augie Fackler
-
wireproto: only expose "between" to version 1 of wire protocolsTue, 27 Feb 2018 16:31:44 -0800, by Gregory Szorc
-
tests: add more tests around hook output and getbundleFri, 02 Mar 2018 18:55:18 -0500, by Gregory Szorc
-
wireproto: add transport specific capabilities in the transportTue, 27 Feb 2018 16:24:02 -0800, by Gregory Szorc
-
wireproto: don't expose changegroupsubset capability if not availableTue, 27 Feb 2018 15:23:04 -0800, by Gregory Szorc
-
wireproto: don't expose legacy commands to version 2 of wire protocolTue, 27 Feb 2018 15:06:10 -0800, by Gregory Szorc
-
wireprotoserver: identify requests via version 2 of SSH protocol as suchTue, 27 Feb 2018 14:56:03 -0800, by Gregory Szorc
-
wireproto: allow wire protocol commands to declare transport supportFri, 02 Mar 2018 09:47:37 -0500, by Gregory Szorc
-
sshpeer: don't read from stderr when that behavior is disabledFri, 02 Mar 2018 18:50:49 -0500, by Gregory Szorc
-
util: extract all date-related utils in utils/dateutil moduleThu, 15 Feb 2018 17:18:26 +0100, by Boris Feld
-
clone: updates the help text for hg clone -{r,b} (issue5654)Thu, 08 Feb 2018 23:27:24 +0530, by Sangeet Kumar Mishra
-
py3: whitelist more passing testsFri, 02 Mar 2018 15:48:31 -0500, by Augie Fackler
-
lfs: convert hexdigest to bytes using sysbytesFri, 02 Mar 2018 11:07:42 -0500, by Augie Fackler
-
lfs: use %d to encode int, not str()Fri, 02 Mar 2018 11:07:25 -0500, by Augie Fackler
-
lfs: use byteskwargs() on some **kwargs for python 3 compatFri, 02 Mar 2018 11:07:07 -0500, by Augie Fackler
-
lfs: add some bytestring wrappers in blobstore.pyFri, 02 Mar 2018 11:06:37 -0500, by Augie Fackler
-
lfs: add missing b prefixes on some regular expressionsFri, 02 Mar 2018 11:05:53 -0500, by Augie Fackler
-
templatekw: deprecate showdict() and showlist() (API)Sun, 25 Feb 2018 19:34:35 +0900, by Yuya Nishihara
-
templatekw: switch remainder of _showlist template keywords to new APISun, 25 Feb 2018 19:25:14 +0900, by Yuya Nishihara
-
templatekw: switch manifest template keyword to new APISun, 25 Feb 2018 20:55:53 +0900, by Yuya Nishihara
-
templatekw: switch latesttags template keywords to new APISun, 25 Feb 2018 19:23:06 +0900, by Yuya Nishihara
-
templatekw: switch revset() to new APISun, 25 Feb 2018 19:08:02 +0900, by Yuya Nishihara
-
templatekw: switch obsfate-related template keywords to new APISun, 25 Feb 2018 19:05:57 +0900, by Yuya Nishihara
-
templatekw: switch namespace template keywords to new APISun, 25 Feb 2018 18:52:51 +0900, by Yuya Nishihara
-
namespace: use registrar to add template keywordSun, 25 Feb 2018 18:56:06 +0900, by Yuya Nishihara
-
templatekw: switch most of showlist template keywords to new API (issue5779)Sun, 25 Feb 2018 16:45:44 +0900, by Yuya Nishihara
-
templatekw: switch showdict template keywords to new APISun, 25 Feb 2018 16:22:55 +0900, by Yuya Nishihara
-
py3: bail on ratcheting tests forward on 3.6.0 and 3.6.1Fri, 02 Mar 2018 15:37:57 -0500, by Kevin Bullock
-
py3: silence "bad escape" warning emitted by re.sub()Thu, 01 Mar 2018 18:22:36 -0500, by Yuya Nishihara
-
debugcommands: add some strkwargs love to some **args callsFri, 02 Mar 2018 14:12:17 -0500, by Augie Fackler
-
debugcommands: add an r prefix to make file mode for fdopen a sysstrFri, 02 Mar 2018 14:10:34 -0500, by Augie Fackler
-
util: work around Python 3 returning None at EOF instead of ''Fri, 02 Mar 2018 14:09:50 -0500, by Augie Fackler
-
util: add missing r prefix on some __setattr__ callsFri, 02 Mar 2018 14:09:20 -0500, by Augie Fackler
-
tests: add some re and globs for test-revset on python3Fri, 02 Mar 2018 13:47:49 -0500, by Augie Fackler
-
tests: add missing b prefixes and fix a %s to %d in test-revset.tFri, 02 Mar 2018 11:38:16 -0500, by Augie Fackler
-
revset: use %d to turn an int into a bytestrFri, 02 Mar 2018 11:37:41 -0500, by Augie Fackler
-
revset: use {force,}bytestr to fix some %r formatting issuesFri, 02 Mar 2018 11:37:21 -0500, by Augie Fackler
-
py3: sixteen more passing testsFri, 02 Mar 2018 01:17:42 -0500, by Augie Fackler
-
debugcommands: fix repr in debugignore print with pycompat.bytestrFri, 02 Mar 2018 00:37:33 -0500, by Augie Fackler
-
verify: fix exception formatting bug in Python 3Thu, 01 Mar 2018 23:58:28 -0500, by Augie Fackler
-
get-with-headers: use bytes stdout thoroughlyFri, 02 Mar 2018 13:50:31 -0500, by Yuya Nishihara
-
exchange: remove dead assignment or forcebundle1Thu, 01 Mar 2018 17:16:36 -0800, by Martin von Zweigbergk
-
templatekw: fix dict construction in _showlist to not mix bytes and strsFri, 02 Mar 2018 09:09:38 -0500, by Augie Fackler
-
templatefilters: avoid infinite recursion bug in stringifyFri, 02 Mar 2018 09:08:11 -0500, by Augie Fackler
-
match: some minimal pycompat fixes guided by test-hgignore.tFri, 02 Mar 2018 00:37:55 -0500, by Augie Fackler
-
purge: apply byteskwargs to opts, fixing all python3 issues hereFri, 02 Mar 2018 00:37:07 -0500, by Augie Fackler
-
tests: port test-bookmarks.t extension to Python 3Fri, 02 Mar 2018 00:19:51 -0500, by Augie Fackler
-
scmutil: fix a repr in an error message on Python 3Fri, 02 Mar 2018 00:19:30 -0500, by Augie Fackler
-
bookmarks: fix a repr in a message on Python 3Fri, 02 Mar 2018 00:19:16 -0500, by Augie Fackler
-
py3: add missing b prefixes in test-debugextensions.tFri, 02 Mar 2018 00:11:19 -0500, by Augie Fackler
-
tests: help dummysmtpd work on python 3Thu, 01 Mar 2018 23:59:44 -0500, by Augie Fackler
-
tests: port helper script revlog-formatv0.py to python 3Thu, 01 Mar 2018 23:58:04 -0500, by Augie Fackler
-
tests: add missing b prefix in test python in test-issue2137.tThu, 01 Mar 2018 21:17:58 -0500, by Augie Fackler
-
templatefilters: convert arguments to sysstrs for unicode() ctorThu, 01 Mar 2018 20:44:38 -0500, by Augie Fackler
-
py3: use util.forcebytestr() to convert IOErrors to bytesFri, 02 Mar 2018 07:14:59 +0530, by Pulkit Goyal
-
py3: whitelist three more passing testsThu, 01 Mar 2018 18:20:49 -0500, by Augie Fackler
-
convert: fix two %r output formats with pycompat.bytestr() wrappingThu, 01 Mar 2018 18:13:50 -0500, by Augie Fackler
-
convert: use our shlex wrapper in filemap to avoid Python 3 tracebacksThu, 01 Mar 2018 17:48:06 -0500, by Augie Fackler
-
convcmd: use our shlex wrapper to avoid Python 3 tracebacksThu, 01 Mar 2018 17:47:49 -0500, by Augie Fackler
-
convert: add some utility code for working with shlex on Python 3Thu, 01 Mar 2018 17:47:35 -0500, by Augie Fackler
-
pycompat: add support for encoding argument to our wrapperThu, 01 Mar 2018 17:46:34 -0500, by Augie Fackler
-
py3: port tests/test-wireproto.py to Python 3Fri, 02 Mar 2018 04:49:08 +0530, by Pulkit Goyal
-
py3: use pycompat.bytestr() to convert None to bytesFri, 02 Mar 2018 04:47:56 +0530, by Pulkit Goyal
-
webcommands: use explicit integer division for Python 3 compatThu, 01 Mar 2018 18:39:21 -0500, by Augie Fackler
-
templatefilters: stop using str as a variable nameFri, 02 Mar 2018 04:59:27 +0530, by Pulkit Goyal
-
py3: fix string slicing in util.parsetimezone()Thu, 01 Mar 2018 18:15:58 -0500, by Yuya Nishihara
-
py3: replace type 'str' by 'bytes' in templater.pyThu, 01 Mar 2018 18:06:25 -0500, by Yuya Nishihara
-
py3: don't crash when re-raising encoding errorThu, 01 Mar 2018 17:56:32 -0500, by Yuya Nishihara
-
py3: mark all string literals in test-command-template.t as bytesThu, 01 Mar 2018 17:43:25 -0500, by Yuya Nishihara
-
py3: byte-stringify ValueError of unescapestr() to reraise as ParseErrorThu, 01 Mar 2018 17:03:40 -0500, by Yuya Nishihara
-
py3: fix type of string literals in templater.tokenize()Thu, 01 Mar 2018 16:56:38 -0500, by Yuya Nishihara
-
py3: drop b'' from error message generated by templater.runmember()Thu, 01 Mar 2018 16:52:17 -0500, by Yuya Nishihara
-
py3: fix join(), min(), and max() template functions over stringThu, 01 Mar 2018 16:42:24 -0500, by Yuya Nishihara
-
py3: use startswith() to check existence of trailing '\n' in .hgtags fileThu, 01 Mar 2018 16:32:45 -0500, by Yuya Nishihara
-
py3: silence return value of file.write() in test-command-template.tThu, 01 Mar 2018 15:57:27 -0500, by Yuya Nishihara
-
error: fix isinstnace check to use bytes instead of strThu, 01 Mar 2018 18:05:47 -0500, by Augie Fackler
-
py3: whitelist another nine passing testsSun, 25 Feb 2018 22:43:50 -0500, by Augie Fackler
-
util: use pycompat.bytestr() on repr() in date parse abortSun, 25 Feb 2018 22:31:13 -0500, by Augie Fackler
-
py3: whitelist 14 new tests passingFri, 02 Mar 2018 03:06:43 +0530, by Pulkit Goyal
-
py3: slice over bytes to prevent getting ascii valuesFri, 02 Mar 2018 02:44:49 +0530, by Pulkit Goyal
-
wireprotoserver: move SSHV1 and SSHV2 constants to wireprototypesTue, 27 Feb 2018 14:26:00 -0800, by Gregory Szorc
-
wireproto: use named arguments for commandentryTue, 27 Feb 2018 14:21:29 -0800, by Gregory Szorc
-
debugcommands: support for triggering push protocolMon, 26 Feb 2018 18:01:13 -0800, by Gregory Szorc
-
sshpeer: support not reading and forwarding stderrMon, 26 Feb 2018 13:12:03 -0800, by Gregory Szorc
-
tests: add wire protocol tests for pushkeyFri, 23 Feb 2018 16:03:27 -0800, by Gregory Szorc
-
debugcommands: support for sending "batch" requestsFri, 23 Feb 2018 12:50:59 -0800, by Gregory Szorc
-
debugcommands: allow sending of simple commands with debugwireprotoThu, 01 Mar 2018 08:27:30 -0800, by Gregory Szorc
-
wireproto: sort response to listkeysFri, 23 Feb 2018 09:40:12 -0800, by Gregory Szorc
-
debugcommands: add debugwireproto commandThu, 01 Mar 2018 08:24:54 -0800, by Gregory Szorc
-
debugcommands: add debugserve commandTue, 27 Feb 2018 15:47:44 -0800, by Gregory Szorc
-
wireprotoserver: support logging SSH server I/O to a file descriptorSun, 25 Feb 2018 11:16:09 -0800, by Gregory Szorc
-
util: enable observing of util.bufferedinputpipeSat, 24 Feb 2018 12:24:03 -0800, by Gregory Szorc
-
util: add a file object proxy that can notify observersSat, 24 Feb 2018 12:22:20 -0800, by Gregory Szorc
-
wireprotoserver: ability to run an SSH server until an event is setSat, 24 Feb 2018 12:07:21 -0800, by Gregory Szorc
-
tests: fix run-tests environment cleanup on Python 3Thu, 01 Mar 2018 15:46:21 -0500, by Augie Fackler
-
templatekw: add compatlist() as a replacement for showlist()Sun, 25 Feb 2018 16:14:37 +0900, by Yuya Nishihara
-
templatekw: add compatdict() as a replacement for showdict()Sun, 25 Feb 2018 16:03:19 +0900, by Yuya Nishihara
-
templatekw: pass templater to _showlist() by an explicit argumentSun, 25 Feb 2018 15:43:35 +0900, by Yuya Nishihara
-
hgweb: make templater mostly compatible with log templatesFri, 22 Dec 2017 21:59:38 +0900, by Yuya Nishihara
-
log: do not invoke templatekw.showobsfate() as a functionSun, 25 Feb 2018 14:42:18 +0900, by Yuya Nishihara
-
templatekw: inline getfiles()Sun, 25 Feb 2018 16:36:38 +0900, by Yuya Nishihara
-
templatekw: factor out function to build a list of files per statusSun, 25 Feb 2018 16:35:34 +0900, by Yuya Nishihara
-
templatekw: switch non-showlist template keywords to new APISun, 25 Feb 2018 13:40:46 +0900, by Yuya Nishihara
-
templatekw: extract non-templatekw function as getgraphnode()Sun, 25 Feb 2018 14:28:32 +0900, by Yuya Nishihara
-
convert: avoid closing ui.fout in subversion code (issue5807)Wed, 28 Feb 2018 16:24:39 +0100, by Sascha Nemecek
-
cmdutil: expand filename format string by templater (BC)Sun, 07 Jan 2018 11:53:07 +0900, by Yuya Nishihara
-
annotate: do not poorly split lines at CR (issue5798) stableWed, 21 Feb 2018 21:14:05 +0900, by Yuya Nishihara
-
templater: add option to parse template string just like raw string literalSun, 18 Feb 2018 11:53:26 +0900, by Yuya Nishihara
-
cmdutil: reorder optional arguments passed to makefileobj()Sun, 18 Feb 2018 10:58:15 +0900, by Yuya Nishihara
-
cmdutil: strip "%m" pattern (first line of commit message) from both endsSun, 18 Feb 2018 10:54:24 +0900, by Yuya Nishihara
-
test-acl: mock up util.getuser() to trust $LOGNAME on WindowsTue, 27 Feb 2018 22:37:57 +0900, by Yuya Nishihara
-
fileset: drop bad "elif:" trying to check invalid size expressionThu, 01 Mar 2018 04:50:22 -0500, by Yuya Nishihara
-
py3: fix test-command-template.t to write files in binary modeThu, 01 Mar 2018 08:55:39 -0500, by Yuya Nishihara
-
py3: use bytestr() to coerce position carried by ParseError to stringThu, 01 Mar 2018 08:45:34 -0500, by Yuya Nishihara
-
py3: use bytes.endswith('\n') to strip off '\n' from debug color outputThu, 01 Mar 2018 08:38:39 -0500, by Yuya Nishihara
-
py3: fix type of attribute names forwarded by templatekw._hybridThu, 01 Mar 2018 08:19:47 -0500, by Yuya Nishihara
-
py3: move between bytes and unicode when re-raising IOErrorThu, 01 Mar 2018 06:47:06 -0500, by Yuya Nishihara
-
py3: use '%d' to format diffstat sumThu, 01 Mar 2018 06:43:13 -0500, by Yuya Nishihara
-
py3: make regexp literal bytes in templatefilters.pyThu, 01 Mar 2018 06:40:09 -0500, by Yuya Nishihara
-
templatefilters: use encoding.unifromlocal/unitolocal() for py3 compatibilityThu, 01 Mar 2018 06:38:37 -0500, by Yuya Nishihara
-
py3: replace str() with it's bytes equivalent in hgext/shelve.pyFri, 02 Mar 2018 00:00:41 +0530, by Pulkit Goyal
-
py3: make sure we write bytes in a file open in bytes modeThu, 01 Mar 2018 23:59:20 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in tests/test-obsolete.tThu, 01 Mar 2018 23:58:21 +0530, by Pulkit Goyal
-
py3: add a b'' prefix in tests/test-fncache.tThu, 01 Mar 2018 23:57:16 +0530, by Pulkit Goyal
-
py3: use pycompat.bytestr() to convert error instances to bytesThu, 01 Mar 2018 23:54:52 +0530, by Pulkit Goyal
-
py3: listify the return value of filter()Thu, 01 Mar 2018 23:52:30 +0530, by Pulkit Goyal
-
py3: use '%d' instead of '%s' for intsThu, 01 Mar 2018 23:51:32 +0530, by Pulkit Goyal
-
py3: add 14 new passing tests to whitelistThu, 01 Mar 2018 03:56:41 +0530, by Pulkit Goyal
-
py3: use util.forcebytestr to convert str to bytesWed, 28 Feb 2018 19:55:25 +0530, by Pulkit Goyal
-
sshpeer: factor out code for creating peers from pipesSun, 25 Feb 2018 11:00:53 -0800, by Gregory Szorc
-
py3: add b'' prefixes in tests/test-rollback.tWed, 28 Feb 2018 22:25:41 +0530, by Pulkit Goyal
-
py3: add b'' prefix in tests/test-revlog-v2.tWed, 28 Feb 2018 22:14:36 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in tests/test-revlog.tWed, 28 Feb 2018 22:10:59 +0530, by Pulkit Goyal
-
py3: make sure we open the file in bytes modeWed, 28 Feb 2018 22:03:47 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in tests/test-revlog-ancestry.pyWed, 28 Feb 2018 22:03:29 +0530, by Pulkit Goyal
-
py3: port the markdirver extension in tests/test-resolve.tWed, 28 Feb 2018 21:57:22 +0530, by Pulkit Goyal
-
py3: backout changeset 56635c506608 which wrongly added couple of b''Wed, 28 Feb 2018 21:48:30 +0530, by Pulkit Goyal
-
py3: add a missing b'' in tests/bruterebase.pyWed, 28 Feb 2018 21:45:42 +0530, by Pulkit Goyal
-
py3: use '%d' for integers instead of b'%s'Wed, 28 Feb 2018 21:45:15 +0530, by Pulkit Goyal
-
py3: make sure we write in mergestate in bytes modeWed, 28 Feb 2018 21:44:28 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in tests/test-rebase-scenario-global.tWed, 28 Feb 2018 21:43:35 +0530, by Pulkit Goyal
-
py3: replace str() calls with their preferred bytes equivalentWed, 28 Feb 2018 21:42:37 +0530, by Pulkit Goyal
-
py3: convert error messages to bytes using util.forcebytestr()Wed, 28 Feb 2018 19:54:49 +0530, by Pulkit Goyal
-
py3: slice over bytes or use startswith() to prevent getting ascii valuesWed, 28 Feb 2018 19:54:10 +0530, by Pulkit Goyal
-
narrow: drop safehasattr() checks for always-present repo.narrowmatchWed, 28 Feb 2018 10:38:09 -0800, by Martin von Zweigbergk
-
narrow: move narrowmatch-related methods to localrepoWed, 28 Feb 2018 12:56:01 -0800, by Martin von Zweigbergk
-
narrow: remove dependency from narrowspec module to hg moduleTue, 27 Feb 2018 23:05:39 -0800, by Martin von Zweigbergk
-
narrow: reduce depedence on narrowspec.save()Wed, 28 Feb 2018 10:32:00 -0800, by Martin von Zweigbergk
-
narrow: always wrap repoWed, 28 Feb 2018 12:55:05 -0800, by Martin von Zweigbergk
-
narrow: consider both local and remote matchers in narrowchangegroupWed, 28 Feb 2018 10:29:04 -0800, by Martin von Zweigbergk
-
narrow: move checking for narrow requirement into _narrowmatch()Wed, 28 Feb 2018 10:22:54 -0800, by Martin von Zweigbergk
-
narrow: move changegroup.supportedoutgoingversions() override to coreWed, 28 Feb 2018 10:55:21 -0800, by Martin von Zweigbergk
-
narrow: move requirement constant to coreWed, 28 Feb 2018 10:21:43 -0800, by Martin von Zweigbergk
-
remotenames: don't inherit the remotenames class from dict classWed, 21 Feb 2018 14:36:42 +0530, by Pulkit Goyal
-
run-tests: cache hghave resultsSun, 25 Feb 2018 17:22:25 -0500, by Matt Harbison
-
run-tests: resume raising an exception when a server fails to startMon, 26 Feb 2018 23:34:29 -0500, by Matt Harbison
-
py3: use print as a function in tests/test-hgrc.tTue, 27 Feb 2018 14:49:05 +0530, by Pulkit Goyal
-
py3: use '%d' to convert integers to bytesTue, 27 Feb 2018 14:46:35 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in tests/test-extension.tTue, 27 Feb 2018 14:44:37 +0530, by Pulkit Goyal
-
py3: convert os.devnull to bytes using pycompat.bytestrTue, 27 Feb 2018 14:42:30 +0530, by Pulkit Goyal
-
py3: fix more keyword arguments handlingTue, 27 Feb 2018 14:41:24 +0530, by Pulkit Goyal
-
py3: make sure regexes are bytesTue, 27 Feb 2018 14:28:17 +0530, by Pulkit Goyal
-
py3: use pycompat.strurl to convert url to strTue, 27 Feb 2018 00:43:37 +0530, by Pulkit Goyal
-
bookmarks: write bookmarks file deterministicallyMon, 26 Feb 2018 13:34:35 -0800, by Gregory Szorc
-
phases: write phaseroots deterministicallyMon, 26 Feb 2018 13:32:03 -0800, by Gregory Szorc
-
internals: document bundle2 formatSat, 17 Feb 2018 11:19:52 -0700, by Gregory Szorc
-
py3: convert bytes to str using encoding.strfromlocalMon, 26 Feb 2018 23:54:40 +0530, by Pulkit Goyal
-
py3: use encoding.strtolocal() to convert str to bytesMon, 26 Feb 2018 23:50:30 +0530, by Pulkit Goyal
-
py3: use email.utils module instead of email.UtilsMon, 26 Feb 2018 16:19:53 +0530, by Pulkit Goyal
-
py3: slice over bytes or use .startswith() to prevent getting ascii valuesMon, 26 Feb 2018 17:25:46 +0530, by Pulkit Goyal
-
py3: use '%d' for integers instead of '%s'Mon, 26 Feb 2018 16:23:12 +0530, by Pulkit Goyal
-
templatekw: add 'requires' flag to switch to exception-safe interfaceSun, 25 Feb 2018 13:24:35 +0900, by Yuya Nishihara
-
templater: specialize ResourceUnavailable error so that it can be caughtSun, 25 Feb 2018 12:50:30 +0900, by Yuya Nishihara
-
templater: move specialized exception types to topSun, 25 Feb 2018 12:47:53 +0900, by Yuya Nishihara
-
templatekw: minimize resource dependency of {envvars} and {termwidth}Sun, 25 Feb 2018 14:14:33 +0900, by Yuya Nishihara
-
templatekw: simply override {graphwidth} function by mapping variableSun, 25 Feb 2018 14:12:34 +0900, by Yuya Nishihara
-
remotenames: drop redundant templatekw names from help textSun, 25 Feb 2018 16:40:41 +0900, by Yuya Nishihara
-
narrow: drop redundant templatekw/revset names from help textSun, 25 Feb 2018 13:42:51 +0900, by Yuya Nishihara
-
run-tests: don't mask errors when a server fails to startSun, 25 Feb 2018 21:04:12 -0500, by Matt Harbison
-
py3: use bytes instead of str in isinstanceMon, 26 Feb 2018 17:27:08 +0530, by Pulkit Goyal
-
py3: convert a map expression into list comprehensionMon, 26 Feb 2018 18:00:29 +0530, by Pulkit Goyal
-
py3: use email.generator module instead of email.GeneratorMon, 26 Feb 2018 16:22:15 +0530, by Pulkit Goyal
-
py3: use pycompat.strkwargs to convert kwargs keys to strMon, 26 Feb 2018 16:16:37 +0530, by Pulkit Goyal
-
py3: whitelist test-push-http.t as passingMon, 26 Feb 2018 01:01:35 -0500, by Augie Fackler
-
util: handle fileno() on Python 3 throwing io.UnsupportedOperationMon, 26 Feb 2018 00:51:41 -0500, by Augie Fackler
-
wireproto: use %d to encode an int, not a %sMon, 26 Feb 2018 00:50:57 -0500, by Augie Fackler
-
httppeer: explicitly catch urlerr.httperror and re-raiseMon, 26 Feb 2018 00:50:35 -0500, by Augie Fackler
-
hgweb: pass exception message to builtin Exception ctor as sysstrMon, 26 Feb 2018 00:49:33 -0500, by Augie Fackler
-
bundle2: part id is an int, use %d to make it bytesMon, 26 Feb 2018 00:28:10 -0500, by Augie Fackler
-
bundle2: **strkwargs love on various kwargs constructionsMon, 26 Feb 2018 00:27:47 -0500, by Augie Fackler
-
http: drop custom http client logicSun, 25 Feb 2018 23:51:32 -0500, by Augie Fackler
-
statichttprepo: move HTTPRangeHandler from byterange and delete the latterSun, 25 Feb 2018 23:34:58 -0500, by Augie Fackler
-
filemerge: do what the context __bytes__ does, but locallySun, 25 Feb 2018 23:09:58 -0500, by Augie Fackler
-
py3: convert known-int values to bytes using %dSun, 25 Feb 2018 23:09:07 -0500, by Augie Fackler
-
py3: hunt down str(exception) instances and use util.forcebytestrSun, 25 Feb 2018 23:08:41 -0500, by Augie Fackler
-
subrepo: use util.forcebytestr() instead of str() on exceptionSun, 25 Feb 2018 22:30:14 -0500, by Augie Fackler
-
tests: add missing b prefixes in test-commit.tSun, 25 Feb 2018 22:29:28 -0500, by Augie Fackler
-
commitextras: fix on Python 3 by using sysstrs for __dict__ opsSun, 25 Feb 2018 22:28:52 -0500, by Augie Fackler
-
util: use pycompat.bytestr() instead of str()Sun, 25 Feb 2018 22:06:53 -0500, by Augie Fackler
-
showconfig: allow multiple section.name selectors (issue5797)Wed, 21 Feb 2018 22:47:47 +0900, by Yuya Nishihara
-
showconfig: use set to filter sections and entry namesWed, 21 Feb 2018 23:02:39 +0900, by Yuya Nishihara
-
util: factor out shellsplit() functionWed, 21 Feb 2018 22:20:27 +0900, by Yuya Nishihara
-
diff: do not split function name if character encoding is unknownFri, 23 Feb 2018 23:09:58 +0900, by Yuya Nishihara
-
histedit: use repo.revs() instead of repo.set() where revisions are neededSun, 25 Feb 2018 11:20:35 +0900, by Yuya Nishihara
-
acl: replace bare getpass.getuser() by platform functionSun, 25 Feb 2018 11:13:01 +0900, by Yuya Nishihara
-
context: remove basectx.__int__ (API)Sat, 24 Feb 2018 11:21:14 -0800, by Gregory Szorc
-
patchbomb: resolve revs before evaluating %ld revsetSat, 24 Feb 2018 11:17:10 -0800, by Gregory Szorc
-
histedit: resolve revs before evaluating %ld revsetSat, 24 Feb 2018 11:04:21 -0800, by Gregory Szorc
-
split: use ctx.rev() instead of %d % ctxSat, 24 Feb 2018 11:20:24 -0800, by Gregory Szorc
-
commands: use ctx.rev() instead of %d % ctxSat, 24 Feb 2018 11:14:28 -0800, by Gregory Szorc
-
cmdutil: use ctx.rev() instead of %d % ctxSat, 24 Feb 2018 11:13:36 -0800, by Gregory Szorc
-
rebase: use ctx.rev() instead of %d % ctxSat, 24 Feb 2018 11:07:07 -0800, by Gregory Szorc
-
histedit: use ctx.rev() instead of %d % ctxSat, 24 Feb 2018 10:53:47 -0800, by Gregory Szorc
-
histedit: rename variables so they have "ctx" in themSat, 24 Feb 2018 10:56:15 -0800, by Gregory Szorc
-
cmdutil: use ctx.rev() instead of int(ctx)Sat, 24 Feb 2018 10:51:13 -0800, by Gregory Szorc
-
templatekw: use ctx.rev() instead of casting context to intSat, 24 Feb 2018 10:48:24 -0800, by Gregory Szorc
-
py3: fix handling of keyword arguments at more placesSat, 24 Feb 2018 16:18:40 +0530, by Pulkit Goyal
-
py3: use '%d' for integers instead of '%s'Sat, 24 Feb 2018 16:16:14 +0530, by Pulkit Goyal
-
merge with stableSat, 24 Feb 2018 17:49:10 -0600, by Kevin Bullock
-
py3: use '//' for integer division in hgweb/common.pySat, 24 Feb 2018 16:20:55 +0530, by Pulkit Goyal
-
py3: use util.forcebytestr to convert error messages to bytesSat, 24 Feb 2018 16:20:15 +0530, by Pulkit Goyal
-
py3: add b'' prefixes to config options in test/badserverext.pySat, 24 Feb 2018 16:15:16 +0530, by Pulkit Goyal
-
py3: replace file() with open()Sat, 24 Feb 2018 16:07:45 +0530, by Pulkit Goyal
-
py3: make sure regexes are bytesSat, 24 Feb 2018 16:06:21 +0530, by Pulkit Goyal
-
py3: convert dict.items() to list explicitlySat, 24 Feb 2018 16:04:57 +0530, by Pulkit Goyal
-
py3: whitelist another 8 passing testsSat, 24 Feb 2018 15:35:00 +0530, by Pulkit Goyal
-
py3: use '//' for integer divisionsSat, 24 Feb 2018 01:22:15 +0530, by Pulkit Goyal
-
py3: use "%d" for integers instead of "%s"Sat, 24 Feb 2018 01:21:22 +0530, by Pulkit Goyal
-
py3: use util.forcebytestr instead of str to convert error messagesSat, 24 Feb 2018 01:20:20 +0530, by Pulkit Goyal
-
py3: use pycompat.byteskwargs() to fix keyword arguments handlingSat, 24 Feb 2018 01:19:26 +0530, by Pulkit Goyal
-
setup: only allow Python 3 from a source checkout (issue5804) stableFri, 23 Feb 2018 17:57:04 -0800, by Gregory Szorc
-
tests: add HTTP POST and PUT support to the $LOGDATE$ substitutionFri, 23 Feb 2018 20:50:10 -0500, by Matt Harbison
-
py3: make regex bytes in hgweb/webcommands.pyFri, 23 Feb 2018 18:47:26 +0530, by Pulkit Goyal
-
py3: replace types.NoneType with type(None)Fri, 23 Feb 2018 18:23:51 +0530, by Pulkit Goyal
-
py3: add missing b'' in test-arbitraryfilectx.tFri, 23 Feb 2018 18:12:20 +0530, by Pulkit Goyal
-
py3: pass ctx.rev() instead of ctx in range()Fri, 23 Feb 2018 18:04:33 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in test-alias.tFri, 23 Feb 2018 18:03:58 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in test-revset.tFri, 23 Feb 2018 17:26:45 +0530, by Pulkit Goyal
-
py3: make sure we use bytes in generate-working-copy-states.pyFri, 23 Feb 2018 17:25:51 +0530, by Pulkit Goyal
-
py3: fix keyword arguments handling in hgext/acl.pyFri, 23 Feb 2018 17:15:36 +0530, by Pulkit Goyal
-
py3: use pycompat.bytestr to convert str returned by getpass.getuser to bytesFri, 23 Feb 2018 17:14:25 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in test-abort-checkin.tFri, 23 Feb 2018 16:57:17 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in test-dispatch.pyWed, 21 Feb 2018 23:43:23 +0530, by Pulkit Goyal
-
cleanup: say goodbye to manifestv2 formatThu, 22 Feb 2018 20:04:42 -0500, by Augie Fackler
-
wireproto: document the wonky push protocol for SSHWed, 21 Feb 2018 16:47:39 -0800, by Gregory Szorc
-
wireprototypes: move baseprotocolhandler from wireprotoserverWed, 21 Feb 2018 14:21:05 -0800, by Gregory Szorc
-
sshpeer: defer pipe buffering and stderr sidechannel bindingWed, 21 Feb 2018 14:02:23 -0800, by Gregory Szorc
-
sshpeer: make pipe polling code more explicitWed, 21 Feb 2018 13:08:55 -0800, by Gregory Szorc
-
tests: store protocol payload in filesMon, 19 Feb 2018 13:20:17 -0800, by Gregory Szorc
-
sshpeer: return framed file object when neededWed, 21 Feb 2018 08:35:48 -0800, by Gregory Szorc
-
sshpeer: move logic for sending a request into a new functionWed, 21 Feb 2018 08:33:50 -0800, by Gregory Szorc
-
help: fix wording describing SSH requirements stableWed, 21 Feb 2018 16:51:09 -0500, by Josef 'Jeff' Sipek
-
sshpeer: rename _recv and _send to _readframed and _writeframedMon, 19 Feb 2018 15:57:28 -0800, by Gregory Szorc
-
util: add a file object proxy that can read at most N bytesWed, 21 Feb 2018 13:41:20 -0800, by Gregory Szorc
-
patches: release the GIL while applying the patchMon, 05 Feb 2018 15:03:51 +0100, by Boris Feld
-
perfbranchmap: allow to select the filter to benchmarkWed, 21 Feb 2018 11:43:12 +0100, by Boris Feld
-
perfbranchmap: display 'unfiltered' for unfiltered performanceWed, 21 Feb 2018 12:13:16 +0100, by Boris Feld
-
py3: two more narrow tests passingThu, 22 Feb 2018 01:00:57 -0500, by Augie Fackler
-
narrowbundle2: more kwargs native string fixesThu, 22 Feb 2018 00:51:32 -0500, by Augie Fackler
-
py3: whitelist another 11 passing testsWed, 21 Feb 2018 23:24:51 -0500, by Augie Fackler
-
narrowbundle2: use native string to get kwargs from dictWed, 21 Feb 2018 22:49:40 -0500, by Augie Fackler
-
narrowbundle2: drop legacy getcgkwargs variableWed, 21 Feb 2018 22:49:15 -0500, by Augie Fackler
-
fancyopts: add support for custom multi-arg opts in fancyopts.pyWed, 21 Feb 2018 20:05:29 -0800, by Daniel Ploch
-
narrowcommands: add some missing strkwargs calls for py3Wed, 21 Feb 2018 11:57:11 -0500, by Augie Fackler
-
narrowwirepeer: add some strkwargs to fix a crash on py3Wed, 21 Feb 2018 11:56:51 -0500, by Augie Fackler
-
narrowchangegroup: remove backwards compatibility with old hgWed, 21 Feb 2018 12:03:44 -0500, by Augie Fackler
-
narrowbundle2: replace map() with equivalent list comprehensionWed, 21 Feb 2018 19:11:11 -0800, by Augie Fackler
-
narrowbundle2: this dict contains native strings, look kws up as suchWed, 21 Feb 2018 11:58:41 -0500, by Augie Fackler
-
tests: port extension in test-narrow-expanddirstate.t to Python 3Wed, 21 Feb 2018 11:56:22 -0500, by Augie Fackler
-
py3: use list comprehensions instead of filter where we need to eagerly filterWed, 21 Feb 2018 10:10:02 -0500, by Augie Fackler
-
narrow: use list comprehension instead of filter for filtering listsWed, 21 Feb 2018 10:08:35 -0500, by Augie Fackler
-
py3: whitelist another eight passing testsWed, 21 Feb 2018 09:43:35 -0500, by Augie Fackler
-
mq: don't reimplement any()Tue, 06 Feb 2018 08:57:22 -0800, by Martin von Zweigbergk
-
mq: don't reimplement any()Tue, 06 Feb 2018 08:55:54 -0800, by Martin von Zweigbergk
-
strip: don't reimplement any()Tue, 06 Feb 2018 08:54:36 -0800, by Martin von Zweigbergk
-
convert: don't reimplement any()Tue, 06 Feb 2018 08:52:12 -0800, by Martin von Zweigbergk
-
verify: don't reimplement any()Tue, 06 Feb 2018 08:49:37 -0800, by Martin von Zweigbergk
-
walkrepos: don't reimplement any()Tue, 06 Feb 2018 08:48:05 -0800, by Martin von Zweigbergk
-
py3: make sure we open file in bytes modeWed, 21 Feb 2018 00:25:16 +0530, by Pulkit Goyal
-
py3: add b'' to test-ui-color.pyWed, 21 Feb 2018 00:24:44 +0530, by Pulkit Goyal
-
debuginstall: strip double quotes from editorbin on WindowsTue, 20 Feb 2018 22:03:13 -0500, by Matt Harbison
-
pycompat: correct the shlex.split() proxy method signature in py3Tue, 20 Feb 2018 21:37:30 -0500, by Matt Harbison
-
merge with stableTue, 20 Feb 2018 22:23:06 -0500, by Augie Fackler
-
convert: don't use type as a variable nameMon, 19 Feb 2018 23:47:53 +0530, by Pulkit Goyal
-
convert: don't use bytes as a variable nameMon, 19 Feb 2018 23:47:15 +0530, by Pulkit Goyal
-
py3: add a r'' prefix to prevent transformer from adding b''Mon, 19 Feb 2018 23:46:42 +0530, by Pulkit Goyal
-
py3: use pycompat.byteskwargs in hgext/convert/Mon, 19 Feb 2018 23:44:41 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in test-mdiff.pyMon, 19 Feb 2018 21:45:49 +0530, by Pulkit Goyal
-
py3: use dict.items() instead of dict.iteritems() in testsMon, 19 Feb 2018 21:18:52 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in test-transplant.tMon, 19 Feb 2018 15:28:54 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in fakepatchtime.pyMon, 19 Feb 2018 15:28:16 +0530, by Pulkit Goyal
-
py3: add b'' prefixes in fakedirstatewritetime.pyMon, 19 Feb 2018 15:27:25 +0530, by Pulkit Goyal
-
py3: use '%d' to convert integer to bytesMon, 19 Feb 2018 15:26:07 +0530, by Pulkit Goyal
-
hgweb: show each obsfateentry on its own lineMon, 19 Feb 2018 12:48:50 +0800, by Anton Shestakov
-
tests: check obsolete changeset with two obsfate entriesMon, 19 Feb 2018 12:30:23 +0800, by Anton Shestakov
-
py3: whitelist another six passing testsSun, 18 Feb 2018 15:53:48 -0500, by Augie Fackler
-
lock: delay is numeric, use %d for formattingSun, 18 Feb 2018 15:38:29 -0500, by Augie Fackler
-
debugbuilddag: use '%d' instead of str() to get numbered linesSun, 18 Feb 2018 15:23:26 -0500, by Augie Fackler
-
tests: add missing b prefixes in test-pending.tSun, 18 Feb 2018 15:18:07 -0500, by Augie Fackler
-
merge: make a copy of dict.items() before mutating the dict during iterationSun, 18 Feb 2018 14:53:55 -0500, by Augie Fackler
-
largefiles: give some **opts some strkwargs loveSun, 18 Feb 2018 14:53:31 -0500, by Augie Fackler
-
wireproto: fix lingering str(exception) with util.forcebytestr(exception)Sun, 18 Feb 2018 14:43:55 -0500, by Augie Fackler
-
scmutil: fix requires-file isalnum() check on first byteSun, 18 Feb 2018 14:37:36 -0500, by Augie Fackler
-
largefiles: mark headre as bytes regexSun, 18 Feb 2018 14:29:04 -0500, by Augie Fackler
-
largfiles: replace filter() with listcomp when result needs to be a listSun, 18 Feb 2018 14:28:31 -0500, by Augie Fackler
-
largefiles: make scheme regex a bytes regexSun, 18 Feb 2018 14:25:03 -0500, by Augie Fackler
-
debuginstall: do not parse editor command in posix way on WindowsSat, 17 Feb 2018 13:13:04 +0900, by Yuya Nishihara
-
py3: use bytes() to byte-stringify url object in url.pySun, 18 Feb 2018 22:13:25 +0900, by Yuya Nishihara
-
url: show full url of proxy server in debug messageSun, 18 Feb 2018 22:12:11 +0900, by Yuya Nishihara
-
py3: make sure we are doing integer division by using '//'Mon, 19 Feb 2018 00:31:01 +0530, by Pulkit Goyal
-
py3: make sure regex is bytes in crecord.pyMon, 19 Feb 2018 00:15:50 +0530, by Pulkit Goyal