merge with i18n

i18n-pt_BR: synchronized with 71c1513fd560

clone: show status "updating to bookmark @" if bookmark @ is not on the default branch, we show updating to bookmark @ on branch <name>

test-clone: fix directory level 92980a8dfdfe inserted a "cd a" but didn't restore the previous directory.

patchbomb: -c is not an alias for the --confirm option The help text shows "-c/--confirm", which implies that -c is an alias for --confirm. Actually, it is an alias for --cc. Correct the text by removing -c.

dirstate: handle dangling junctions on windows (issue2579)

largefiles: don't copy largefiles from working dir to the store while converting Previously, if one or more largefiles for a repo being converted were not in the usercache, the convert would abort with a reference to the largefile being missing (as opposed to the previous patch, where the standin was referenced as missing). This is because commitctx() tries to copy all largefiles to the local store, first from the user cache, and if the file isn't found there, from the working directory. No files will exist in the working directory during a convert, however. It is not sufficient to force the source repo to be local before proceeding, because clone and pull do not download largefiles by default. This is slightly less than ideal because while the conversion will now complete, it won't be possible to update to revs with missing largefiles unless the user intervenes manually, because there is no default path pointing back to the source repo. Ideally these files would be cached during the conversion. This check could have been done in reposetup.commitctx() instead, but this ensures the local store directory is created, which is necessary to enable the standin matcher. The rm -> 'rm -f' change in the test is to temporarily suppress an error clearing the cache- as noted, the cache is is not repopulated during convert. When that is fixed, this can be changed back and the verification errors will disappear too.

largefiles: respect the rev when reading standins in copytostore() (issue3630) When the rev isn't specified, the standin for the working copy gets read. But convert doesn't update the working copy for each cset it processes, so there is no standin and the 'hg convert' would abort complaining about the standin being missing. Note that if the largefile is not in the user cache, 'hg convert' complains about the largefile itself missing from the destination repo.

subrepo: subrepo isolation, pass baseui when cloning a new subrepo (issue2904) Create the repo with baseui because it should only get the global configuration. After this patch issue2904 is finally fixed.

subrepo: more isolation, only use ui for hg.peer when there is no repo ui contains repo specific configuration, so do not use it when there is a repo. But pass it to hg.peer when there is no repo. Then it only contains global configuration.

peer: subrepo isolation, pass repo instead of repo.ui to hg.peer Do not pass ui because it contains the configuration of the repo. It is the same object as repo.ui. When a repo is passed to hg.peer, the global configuration is read from repo.baseui.

subrepo: isolate configuration between each repositories in subrepo tree Before this patch, repository local configurations are not isolated between repositories in subrepo tree, because "localrepository" objects for each subrepositories are created with "ui" instance of the parent of each ones. So, local configuration of the parent or higher repositories are visible also in children or lower ones. This patch uses "baseui" instead of "ui" to create repository object: the former contains only global configuration. This patch also copies 'ui.commitsubrepos' configuration to commit recursively in subrepo tree, because it may be set in not "repo.baseui" but "repo.ui".

bookmarks: backed out new message from changeset 52c7e171e355 Not strictly a bugfix, hasn't achieved consensus yet.

clone: print bookmark name when clone activates a bookmark Similar to the message that prints the checked out branch name. Without this, the user might accidentally move the @ bookmark.

clone: activate @ bookmark if updating to it The message "updating bookmark @ failed!" in test-bookmarks-pushpull.t is correct, because the changeset that the @ bookmark points to is not pushed to the target repository.

test-clone.t: check that branch "@" is not automatically checked out This verifies that c9339efed653 fixes the second problem mentioned in issue3677.

test-bookmarks.t: check that bookmark "default" is not automatically checked out This verifies that c9339efed653 fixes the problem originally reported in issue3677.

clone: make sure to use "@" as bookmark and "default" as branch (issue3677) Before this change a bookmark named "default" or a branch named "@" would cause the wrong changeset to be checked out. The change in output of test-hardlinks.t is due to the fact that no unneeded tag lookups for the tags "@" or "default" happen, therefore the cache file is not created.

bookmark: simplify nodemap check introduced in the previous changeset

bookmark: prevent crashing when a successor is unknown locally (issue3680) The `%ln` revset substitution does not accept unknown node. We prune unknown node from potential successors before computing descendants. This have no impact on the result of this function. - Descendants of unknown changeset as unknown, - all successors of unknown changesets are already return by the call who returned those same unknown changesets, - unknown changesets are never a valid destination for a bookmark.

bookmark: complexity pull-push test to have deeper tree This changeset only touch test. The previous test was correct, it tested that the successors of an old bookmark position was seen as a valid destination for bookmark. However, a newer version is made for two reason: (1) The new test check further. It check that the descendant of the successors is a valid destination (2) An ever more complexe test is needed to validate a future fix to issue 3680 Splitting complexification of the test and actual bugfix help to reduce the noise in the bugfix changeset. Issue 3680 is NOT fixed by this changeset.

amend: fix incompatibity between logfile and message option (issue3675) Bug introduced by 9732473aa24b

test-remove: adapt to differing error message on Windows On Windows, this part of the test failed with $ hg rm --after nosuch - nosuch: No such file or directory + nosuch: The system cannot find the file specified [1] Fixed by glob-ing away the error message if the test is run on Windows (see for example test-bad-pull.t line 3 for precedent). test-remove.t now passes on Windows.

test-remove: fix \ vs. / issues on Windows This part of the test failed with $ hg rm --after d1 - removing d1/a + removing d1\a on Windows.

verify: fix all doubled-slash sites (issue3665)

patchbomb: respect --in-reply-to for all mails if no intro message is sent Before this change, the thread hierarchy looked like this: PARENT PATCH1/x PATCH2/x PATCH3/x ... Now it is: PARENT PATCH1/x PATCH2/x PATCH3/x ... With an introductory message the behaviour is unchanged: PARENT INTRO PATCH1/x PATCH2/x PATCH3/x ...

test: add test for the issue introduced by e410be860393 (issue3669) e410be860393 (released as Mercurial 2.3) introduced the issue that the revset program started with 40 hexadecimal letters caused unexpected result at "hg log" execution. This issue was already fixed by bde1185f406c (released as 2.3.1), but there is no test to examine whether this issue is certainly fixed or not: no test fails even if bde1185f406c is backed out. This patch adds test for this issue. Added test is also confirmed to fail, when it is tested against: - Mercurial 2.3, or - Mercurial 2.3.1 or later with backing bde1185f406c out

obsolete: add missing line feed in debug error message

merge with stable

localrepo: translate "push includes X changeset" only once This was introduced in 12fdaa30063a

merge stable heads

Merge with stable

Merge repeated-slash fix

verify: tolerate repeated slashes in a converted repo (issue3665) These slashes are a hangover from issue3612, fixed in e4da793998bf. Although the bugfix in that commit is correct, the test it adds does not replicate the conditions for the bug correctly.

scmutil: generalize message to make it more i18n-friendly

update: check for missing files with --check (issue3595)

remove: don't return error on directories with tracked files Spotted by Sergey <sergemp@mail.ru>

largefiles: use 'default' instead of 'default-push' when pulling (issue3584) This only applies to downloading largefiles, and only when no source for the pull is explicitly provided. The repository itself was properly being pulled via 'default' previously. Using --all-largefiles is not necessary on a bare pull to test this (this existing test is merely a convenience), but it is required to test pulling on the rebase path. Note that the errors generated in the --rebase case are because the repo specified doesn't have the largefiles in its cache (though they are in the user cache), so the errors are misleading. Specifying --all-largefiles when cloning to 'b' fixes this, but instead of errors, it reports caching only 5 largefiles instead of the 9 that come up missing. Likely this is because the largefile download procedure tries to download missing files for each rev, and some of the files have standins in more than one rev that gets pulled.

scmutil: add mustaudit delegation to filtervfs (issue3673)

scmutil: abstract out mustaudit delegation

clone: don't %-escape the default destination (issue3145)

test-largefiles: fix failing test on Windows The test failed due to / vs. \ in paths issues. Fixes 08d11b82d9fc.

test-push-http: fix failing test on Windows The test failed due to problems with escaping. Fixes 8474be4412ca.

Added signature for changeset d118a4f4fd16

Added tag 2.4-rc for changeset d118a4f4fd16

merge default into stable for 2.4 code freeze

hgwebdir: make collapsed folders easier to distinguish from repositories Add a "/" character after the collapsed folder names, to make them easier to distinguish from regular repository and subrepository entries.

help: indicate help omitting if help document is not fully displayed Before this patch, there is no information about whether help document is fully displayed or not. So, some users seem to misunderstand "-v" for "hg help" just as "the option to show list of global options": experience on "hg help -v" for some commands not containing verbose containers may strengthen this misunderstanding. Such users have less opportunity for noticing omitted help document, and this may cause insufficient understanding about Mercurial. This patch indicates help omitting, if help document is not fully displayed. For command help, the message below is displayed at the end of help output, if help document is not fully displayed: use "hg -v help xxxx" to show more complete help and the global options and otherwise: use "hg -v help xxxx" to show the global options For topics and extensions help, the message below is displayed, only if help document is not fully displayed: use "hg help -v xxxx" to show more complete help This allows users to know whether there is any omitted information or not exactly, and can trigger "hg help -v" invocation. This patch causes formatting help document twice, to switch messages one for omitted help, and another for not omitted. This decreases performance of help document formatting, but it is not mainly focused at help command invocation, so this wouldn't become problem.